31 | (The) effect of iron addition on the microstructures and mechanical properties of Cu-11.0% Al alloy = Cu-11.0% Al합금에의 철 첨가가 현미 경조직과 기계적 성질에 미치는 영향link Yeum, Kook-Sun; 염국선; et al, 한국과학기술원, 1976 |
32 | Ti 박막으로 부터 급속 열처리에 의한 $TiSi_2$ 형성에 관한 연구 = A study on the formation of $TiSi_2$ from thin Ti film by rapid thermal processlink 강상원; Kang, Sang-Won; 천성순; 박신종; et al, 한국과학기술원, 1990 |
33 | TiC 화학증착과 TiN 플라즈마 화학증착의 증착기구 및 증착층의 특성에 관한 연구 = The deposition characteristics and structural properties of TiC deposited by chemical vapour deposition and TiN deposited by plasma enhanced chemical vapour depositionlink 장동훈; Jang, Dong-Hoon; et al, 한국과학기술원, 1988 |
34 | TiN Barrier Layer 위에 금속유기화학증착법에 의해 제조된 구리박막의 증착특성에 관한 연구 이원종; 윤수식; 이성권; 민재식; 천성순, 한국재료학회 추계학술연구발표회, pp.0 - 0, 한국재료학회, 1993-11 |
35 | TiN Glue Layer위에 화학증착된 텅스텐박막에 관한 연구 = A study on the tungsten films prepared by LPCVD on TiN glue layerlink 장규환; Chang, Kyu-Hwan; et al, 한국과학기술원, 1992 |
36 | Via-hole filling을 위한 텅스텐 저압화학증착에 관한 연구 = A study on the low pressure chemical vapor deposition of tungsten for via-hole fillinglink 김일; Kim, Il; et al, 한국과학기술원, 1990 |
37 | YBa2Cu3O7-x 결정입계 접합을 이용한 마이크로파 감지소자 신중식; 조창현; 황두섭; 김영근; 위당문; 천성순; 신우석; et al, 한국재료학회지, v.4, no.6, pp.681 - 686, 1994-01 |
38 | 가공열처리가 7075 알미늄 합금의 기계적 성질에 미치는 영향 = The effect of thermomechanical treatment on the mechanical properties of 7075 aluminium alloylink 한용섭; Han, Yong-Seop; et al, 한국과학기술원, 1980 |
39 | 강의 Cr도금에 초음파가 미치는 영향에 관한 연구 = The effect of ultrasonic vibration on hard chromium plating of steellink 남궁억; Nam, Koong-Eok; 천성순; 남수우; et al, 한국과학기술원, 1982 |
40 | 강의 망간 인산염 처리에 초음파가 미치는 영향에 관한 연구 = A study on the effect of ultrasonics on Mn phosphating of steellink 양재균; Yang, Jae-Kyun; et al, 한국과학기술원, 1981 |
41 | 강의 전해침붕처리에 있어서 Cyclic current 를 중첩시킨 영향에 관한 연구 = A study on the electroboronizing of steel by superimposed cyclic currentlink 한성호; Hahn, Seong-Ho; et al, 한국과학기술원, 1978 |
42 | 강의 침붕처리에 초음파가 미치는 영향에 관한 연구 = A study on the effect of ultrasonics on boronizing of steellink 김재곤; Kim, Jae-Gon; et al, 한국과학기술원, 1979 |
43 | 고온 가공열처리가 Vanadium modified AISI 4330 강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of vanadium modified AISI 4330 steellink 이재성; Lee, Jai-Sung; et al, 한국과학기술원, 1979 |
44 | 고온가공 열처리가 AISI $300^M$ 강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of AISI $300^M$ steellink 정종훈; Jeong, Jong-Hoon; et al, 한국과학기술원, 1981 |
45 | 고온가공열처리가 AISI H13 열간공구강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of AISI H13 hot work tool steellink 김대훈; Kim, Dae-Hun; et al, 한국과학기술원, 1980 |
46 | 공구강에 화학증착된 Titanium carbide 의 증착특성 및 기계적 성질에 관한 연구 = A study of chemical vapor deposition of TiC on high alloyed steels and mechanical properties of deposited TiClink 강창진; Kang, Chang-Jin; et al, 한국과학기술원, 1987 |
47 | 공구강위에 플라즈마 화학증착, Cathodic arc ion plating 및 DC reactive magnetron sputtering한 TiN 박막의 물성에 관한 연구 = A study on the properties of Tin coatings by plasma assisted CVD, cathodic Arc ion plating and DC reactive magnetron sputtering on SKH9link 정병진; Jeong, Byeong-Jin; et al, 한국과학기술원, 1992 |
48 | 금속 유기 화학 증착법에 의해 증착된 구리 박막의 증착 및 물성에 관한 연구 = A study on the deposition and the film characteristics of MOCVD copper thin filmslink 윤수식; Yoon, Soo-Sik; et al, 한국과학기술원, 1996 |
49 | 급열처리가 AISI H13 열간성형용 공구강의 기계적 성질에 미치는 효과 = The effect of rapid heat treatment on mechanical properties of AISI H13 hot work tool steellink 소명기; So, Myoung-Gi; et al, 한국과학기술원, 1980 |
50 | 단결정 Si 표면에의 $Al_2O_3$ 화학증착에 있어서 반응변수가 증착속도 및 표면형상에 미치는 영향에 대한 연구 = The effects of deposition variables on deposition rate & morphology in the chemical vapor deposition of $Al_2O_3$ onto silicon single crystallink 김철; Kim, Chul; et al, 한국과학기술원, 1983 |
51 | 반응기체의 분압이 $Al_2O_3$ 의 화학증탁에 미치는 영향에 관한 연구 = Effect of partial pressure of reactantgas on the chemical vapor deposition of $Al_2O_3$link 김재곤; Kim, Jae-Gon; et al, 한국과학기술원, 1982 |
52 | 분자선 성장법에 의한 갈륨비소 전력소자의 공정 및 전기적 특성 분석에 관한 연구 = A study on GaAs MBE-grown power device and its electrical charateristicslink 맹성재; Maeng, Sung-Jae; et al, 한국과학기술원, 1996 |
53 | 분할 화학증착방법으로 증착된 알루미늄 박막의 선택성 및 표면 morphology 개선에 관한 연구 = A study on the improvement of the selectivity and surface morphology of al thin film by cycle chemical vapor depositionlink 안상덕; Ahn, Seong-Deok; 강상원; 천성순; et al, 한국과학기술원, 2000 |
54 | 비정질 $Si_3N_4$ 박막의 화학증착과 계면전하 특성에 관한 연구 = A study on chemical vapor deposition of amorphous $Si_3N_4$ thin film and the characteristics of interface chargelink 박흥락; Park, Heung-Lak; et al, 한국과학기술원, 1986 |
55 | 비정질 실리콘 카바이드 화학증착 공정의 수치모사화 및 광학적, 전기적 특성연구 = A study on the process simulation and the properties of deposited a-SiC films in chemical vapor depositionlink 박영진; Park, Young-Jin; et al, 한국과학기술원, 1990 |
56 | 사형 주조된 Mg-9wt%Al-Zn 합금의 우선 배향과 기계적 성질의 연구 = A study of preferred orientation and mechanical properties of sand-cast Mg-9wt%Al-Zn alloyslink 김희중; Kim, Hi-Jung; et al, 한국과학기술원, 1978 |
57 | 산소와 질소분위기에서 열처리된 ECR- PECVD 탄탈륨 산화막의 전기적 성질 연구 이원종; 김일; 김종석; 안성덕; 천성순, 한국재료학회 춘계학술연구발표회, pp.0 - 0, 한국재료학회, 1994-05 |
58 | 소결 경질 탄화물에 화학 증착법으로 TiC 를 증착시켰을 때 그 증착층의 성질에 대한 조사 = The chemical vapor deposition of titanium carbide on sintered hard carbidelink 장재필; Chang, Jae-Pill; et al, 한국과학기술원, 1980 |
59 | 소결 경질 탄화물에 화학 증착법으로 TiC 를 증착시킬 때 그들의 성질에 관한 연구 = The chemical vapor deposition of TiC coating on sintered hard carbides and resultant propertieslink 이동복; Lee, Dong-Bok; et al, 한국과학기술원, 1979 |
60 | 실리콘 단결정 Substrate 에서 $Al_2O_3$ 화학증착층의 핵생성 및 결정 성장에 관한 연구 = A study of nucleation and crystal growth in the chemical vapor deposition of $Al_2O_3$ onto silicon single crystallink 최성우; Choi, Sung-Woo; et al, 한국과학기술원, 1983 |
61 | 알루미늄 2014 합금의 환상압연 공정에서 최적 열처리 조건에 대한 연구 = Study of optimum heat treatment conditions for ring rolling process of AL 2014 alloylink 최재성; Choi, Jae-Sung; et al, 한국과학기술원, 1981 |
62 | 열처리 조건이 ECR plasma 화학 증착법으로 증착된 tantalum oxide 박막의 물성에 미치는 영향 = The effects of annealing conditions on the properties of tantalum oxide thin films deposited by electron cyclotron resonance plasma enhanced chemical vapor depositionlink 권오승; Kwon, Oh-Seung; et al, 한국과학기술원, 1993 |
63 | 온도에 따른 AISI304L stainless steel의 저주파 피로 거동에 관한 연구 = The effect of temperature on the low cycle fatigue behavior in AISI 304L stainless steellink 이제민; Lee, Je-Min; 남수우; 천성순; et al, 한국과학기술원, 1987 |
64 | 왕겨로 부터 Si3N4형성에 관한 속도론적 연구 = The kinetics of silicon nitride formation from korean rice hullslink 강상원; Kang, Sang-Won; et al, 한국과학기술원, 1978 |
65 | 용접 구조용 Al-Zn-Mg 합금 용접부의 저주파 피로 특성에 관한 연구 = A study on the low-cycle fatigue behaviors for Al-Zn-Mg alloy weldmentslink 성완; Sung, Wan; et al, 한국과학기술원, 1987 |
66 | 유기금속화학증착법에 의한 GaAs 와 $Al_xGa_{1-x}$As 의다층에피 성장 = Multilayer epitaxial growth of GaAs and $Al_xGa_{1-x}$ by metalorganic chemical vapor depositionlink 김무성; Kim, Moo-Sung; et al, 한국과학기술원, 1986 |
67 | 이온 질화처리가 SCM 21 강과 SCM 4강의 충격강도에 미치는 영향에 관한 연구 = Effect of ionitriding on impact strength in Cr-Mo steellink 이종권; Lee, Jong-Kwon; et al, 한국과학기술원, 1979 |
68 | 전자빔 손상이 n-MOSFET의 전기적 특성에 미치는 영향 = Effects of electron beam damage on the electrical characteristics of n-MOSFETslink 전영진; Jeon, Young-Jin; et al, 한국과학기술원, 1994 |
69 | 증착 조건이 TiC-TiN double layer 화학 증착에 미치는 영향에 관한 연구 = Effect of deposition conditionson TiC-TiN double layer coating by chemical vapor depositionlink 김무성; Kim, Moo-Sung; 남수우; 천성순; et al, 한국과학기술원, 1982 |
70 | 증착변수가 $Al_2O_3$ 화학증착에 미치는 영향에 대한 연구 = The effects of deposition variables on the chemical vapor deposition of $Al_2O_3$link 박철순; Park, Chul-Soon; 남수우; 천성순; et al, 한국과학기술원, 1982 |
71 | 증착변수가 $Si_3N_4$ 증착속도에 미치는 영향에 대한 연구 = The effects of deposition variables on deposition rate in chemical vapor deposition of $Si_3N_4$ onto silicon single crystallink 김지범; Kim, Ji-Bum; et al, 한국과학기술원, 1984 |
72 | 증착조건이 Si 증착속도 및 증착층의 표면형상에 미치는 영향에 대한 연구 = Effect of deposition conditionson the deposition rate and the crystal morphology of silicon depositlink 조준형; Cho, Joon-Hyoung; et al, 한국과학기술원, 1983 |
73 | 초경합금에 화학증착법으로 TiC, TiN, $TiC_xN_y$ 를 증착시킬때 그들의 성질에 관한 연구 = Chemical vapor deposition of TiC, TiN and $TiC_xN_y$ on cemented tungsten carbide and resultant propertieslink 조재신; Cho, Jae-Shin; et al, 한국과학기술원, 1981 |
74 | 초음파 진동이 7075 알루미늄 합금의 설출경화에 미치는 영향 = The effect of ultrasonic vibrations on the precipitation hardening of 7075 Al alloylink 노태환; No, Tae-Hwan; et al, 한국과학기술원, 1980 |
75 | 코발트계 박막합금의 비정질형성범위와 자기적성질에 관한 연구 = Glass forming range and magnetic properties of Co-base thin film alloyslink 김희중; Kim, Hi-Jung; et al, 한국과학기술원, 1988 |
76 | 텅스텐 박막의 저압화학 증착 기구 및 증착층의 특성에 관한 연구 = A study on the mechanisms of tungsten low pressure chemical vapor deposition and the characteristics of the deposited layerlink 박흥락; Park, Heung-Lak; 천성순; 남수우; et al, 한국과학기술원, 1989 |
77 | 티타늄 첨가 동합금을 Brazing filler 로 사용한 질화규소와 철강의 접합기구 = Bonding mechanism between $Si_3N_4$ and steel using titanium added copper alloy as a brazing fillerlink 김대훈; Kim, Dae-Hun; 천성순; 황선효; et al, 한국과학기술원, 1990 |
78 | 프로판을 사용한 TiC 화학증착에 대한 연구 = Chemical vapor deposition of titanium carbide on WC-6Co sintered carbide using propanelink 백동수; Baik, Dong-Soo; et al, 한국과학기술원, 1983 |
79 | 프로판을 사용한 TiC 화학증착에서 증착조건들이 미치는 영향 = The effects of deposition variables in the chemical vapor deposition of TiC using propanelink 김동갑; Kim, Dong-Gap; et al, 한국과학기술원, 1984 |
80 | 플라즈마 화학 증착법에 의하여 증착된 TiN,TiCxNy 박막의 증착 특성 및 물성에 관한 연구 = The study on the deposition characteristics and properties of the TiN and TiCxNy coatings by plasma assisted chemical vapor depositionlink 김시범; Kim, Si-Bum; et al, 한국과학기술원, 1991 |
81 | 플라즈마 화학증착된 Aluminum oxide 박막의 $CF_4$와 $CC1_4$ 플라즈마에서의 Reactive ion etching 특성 = The $CF_4/CC1_4$ reactive ion etching properties of aluminum oxide films deposited by PECVDlink 김형석; Kim, Hyung-Suk; et al, 한국과학기술원, 1993 |
82 | 플라즈마 화학증착된 TiN 박막의 분산분석에 의한 증착특성 및 기계적성질에 관한 연구 = A study on the deposition characteristics by analysis of variance and mechanical properties by plasma enhanced chemical vapor depositionlink 인치범; In, Chi-Bum; et al, 한국과학기술원, 1990 |
83 | 플라즈마 화학증착법, 이온 플레이팅법 및 반응성 스퍼터링법에 의해 증착된 TiN 박막의 특성 비교 연구 안치범; 정병진; 이원종; 천성순, 한국세라믹학회지, v.31, no.7, pp.731 - 738, 1994-04 |
84 | 플라즈마 화학증착법에 의하여 증착된 aluminum oxide 박막의 C-V 특성에 증착 변수가 미치는 영향 = The effect of deposition parameters on C-V characteristics of aluminum oxide thin films deposited by PECVDlink 김용천; Kim, Yong-Chun; et al, 한국과학기술원, 1990 |
85 | 플라즈마 화학증착법에 의하여 증착된 Aluminum oxide 박막의 에칭 특성에 관한 연구 = A study on etching properties of aluminum oxide films deposited by plasma enhanced chemical vapor depositionlink 정진기; Jung, Jin-Ki; et al, 한국과학기술원, 1991 |
86 | 플라즈마 화학증착법에 의하여 증착된 Aluminum oxide 절연박막의 특성에 관한 연구 = A study on the properties of the aluminum oxide dielectric films deposited by plasma enhanced chemical vapor depositionlink 강창진; Kang, Chang-Jin; et al, 한국과학기술원, 1990 |
87 | 플라즈마 화학증착법에 의해 제조된 기억소자용 고유전 탄탈륨 산화박막에 관한 연구 = PECVD $Ta_2O_5$ dielectric thin films for memory deviceslink 김일; Kim, Il; et al, 한국과학기술원, 1995 |
88 | 플라즈마 화학증착법에 의해 증착된 알루미늄 산화막의 증착 기구와 전기적 특성에 관한 연구 = A study on the deposition mechanism and the electrical properties of aluminum oxide films deposited by plasma enhanced chemical vapor depositionlink 김용천; Kim, Yong-Chun; et al, 한국과학기술원, 1993 |
89 | 플라즈마 화학증착한 aluminum oxide의 reactive ion etching 특성 이원종; 김형석; 천성순, 한국재료학회 추계학술연구발표회, pp.0 - 0, 한국재료학회, 1992-11 |
90 | 화학증착법에 의한 $SnO_2$의 증착기구 및 전기적성질에 관한 연구 = The deposition mechanism and electrical properties of $SnO_2$ by chemical vapor depositionlink 김광호; Kim, Kwang-Ho; et al, 한국과학기술원, 1986 |