1801 | 복합적층 구조물의 진동 및 감쇠 특성 = Vibration and damping characteristics of composite laminated structureslink 구교남; Koo, Kyo-Nam; et al, 한국과학기술원, 1994 |
1802 | 복합적층 원통판넬의 좌굴후 거동 해석 = Postbuckling analysis of composite laminated cylindrical panelslink 권진회; Kweon, Jin-Hwe; et al, 한국과학기술원, 1993 |
1803 | 복합적층보를 이용한 층간파괴인성 특성연구 = Characterization of interlaminar fracture toughness by laminated composite beamslink 심재열; Shim, Jae-Yeul; et al, 한국과학기술원, 1994 |
1804 | 복합적층판의 두께변화가 램파의 전파에 미치는 영향 = The effect of thickness variation on the propagation of Lamb waves in composite laminateslink 한정호; Han, Jeong-Ho; et al, 한국과학기술원, 2005 |
1805 | 볼록근사를 이용한 확정론적 최적화와 신뢰도 평가 순차 기법의 효율 개선 = Improvement of sequential optimization and reliability assessment method using convex approximationslink 조태민; Cho, Tae-Min; et al, 한국과학기술원, 2010 |
1806 | 볼텍스와 비예혼합화염 상호작용에 관한 가시화 연구 = A visual investigation of a vortex ring interacting witha nonpremixes flamelink 유영환; You, Young-Hwan; et al, 한국과학기술원, 1999 |
1807 | 부등식 형태의 관절 구속 조건을 고려한 임무-우선순위 기반 역기구학 및 휴머노이드 전신 동작에의 적용 = Task-priority based inverse kinematics with joint inequality constraints and its application to whole-body motion of a humanoid robotlink 김인혁; Kim, In-Hhyeok; et al, 한국과학기술원, 2013 |
1808 | 부력의 영향을 받는 수평경계층 유동에 대한 4-방정식 난류모델의 해석 = Four-equation turbulence model for prediction of the turbulent boundary layer affected by buoyancy force over a flat plate ;link 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 1984 |
1809 | 부분 시스템에 기초한 혼합 순차적 공식화를 이용한 자동화된 다물체 동역학 해석 코드의 개발 = Development of automated multibody dynamic analysis code using subsystem-based hybrid recursive formulationlink 강신길; Kang, Sheen-Gil; et al, 한국과학기술원, 2003 |
1810 | 부분적 측정데이터를 이용한 구조계의 연결부 동적계수 규명 = Identification of joint structural parameters using subset response measurements in structural systemslink 양경택; Yang, Kyung-Taek; et al, 한국과학기술원, 1993 |
1811 | 부분적으로 개방된 공동의 구조/음향 연성에 관한 연구 = A study on the structural-acoustic coupling of a cavity with a partial openinglink 김시문; Kim, Sea-Moon; et al, 한국과학기술원, 2001 |
1812 | 부영역 최적화 문제의 정립과 형상 설계 민감도 해석의 이용 = Subdomain optimization problems and use of the shape design sensitivity analysis based on continuum mechanics approachlink 주서진; Joo, Seo-Jin; et al, 한국과학기술원, 1995 |
1813 | 부품 라이브러리 정보의 자동 통합을 위한 온톨로지 모델링 프레임워크 = An ontology modeling framework for automated integration of parts librarieslink 조준면; Cho, Joon-Myun; et al, 한국과학기술원, 2006 |
1814 | 분무 유도식 직접분사 가솔린 엔진의 연소특성 개선에 대한 연구 = Improvement of combustion characteristics in a spray-guided direct-injection spark-ignition enginelink 오희창; Oh, Hee-Chang; et al, 한국과학기술원, 2013 |
1815 | 분무식 연소기내의 비회색체 복사에 관한 연구 = A modeling of spray combustion with nongray radiationlink 최창은; Choi, Chang-Eun; et al, 한국과학기술원, 1997 |
1816 | 분자동역학을 이용한 나노임프린트 리소그래피에서의 패턴 전사에 관한 연구 = A molecular dynamics study on pattern transfer in nanoimprint lithographylink 강지훈; Kang, Ji-Hoon; et al, 한국과학기술원, 2007 |
1817 | 분해도를 이용한 조립순서의 추론 및 Lay-out 설계에 관한 연구 = On the generation of assembly sequences and the Lay-out design based on disassemblabilitylink 신철균; Shin, Chul-Kyun; et al, 한국과학기술원, 1994 |
1818 | 불완전한 모멘트 정보에 대한 손상확률의 상한에 관한 연구 = An upper bound on failure probability for incomplete moment informationlink 성영화; Sung, Young-Hwa; et al, 한국과학기술원, 2010 |
1819 | 불확실성을 고려한 효율적인 공력 형상 최적 설계에 대한 연구 = A study on the efficient aerodynamic shape design optimization with uncertaintieslink 김수환; Kim, Su-Whan; et al, 한국과학기술원, 2006 |
1820 | 블렌딩 기법을 통한 소형 과산화수소 추력기의 성능 향상 = Performance improvement of small scale hydrogen peroxide thruster by blending methodlink 이정섭; Lee, Jeong-Sub; et al, 한국과학기술원, 2013 |
1821 | 비 전류 작용 적분을 이용한 스패터 발생 메카니즘에 관한 연구 = A study on mechanism of spatter generation from the viewpoint of integral of specific current actionlink 강성구; Kang, Sung-Ku; et al, 한국과학기술원, 2006 |
1822 | 비구면 렌즈 금형의 컴퓨터 제어 폴리싱에 관한 연구 = A study on computer-controlled polishing of aspherical lens moldlink , 한국과학기술원, 2000 |
1823 | 비구면 렌즈 측정을 위한 층밀리기 간섭계에 관한 연구 = Lateral shearing interferometry for testing of aspherical lenseslink 조우종; Cho, Woo-Jong; et al, 한국과학기술원, 1997 |
1824 | 비균질성 석출물의 탄성장과 상호작용에너지 = Elastic field and interaction energy of inhomogeneous precipitateslink 최병익; Choi, Byung-Ik; et al, 한국과학기술원, 1985 |
1825 | 비대칭 강도 분포를 갖는 사각 동선 제조 공정 설계 = Process design for manufacturing rectangular copper wires with asymmetric strength distributionlink 주호선; 임용택; et al, 한국과학기술원, 2018 |
1826 | 비대칭 복합적층평판의 경화된 형상에 대한 비선형 워핑해석 = Nonlinear warping analysis of the cured shape in unsymmetrically laminated plateslink 전완주; Jun, Wan-Jun; et al, 한국과학기술원, 1989 |
1827 | 비등방성 난류모델을 이용한 난류 전단류의 해석 = Turbulent shear flow predictions using the anisotropic turbulence modelslink 구형모; Koo, Hyeong-Mo; et al, 한국과학기술원, 1991 |
1828 | 비디오 영상에서 카메라 가속도의 자동 복원을 통한 모션 시뮬레이터의 운동감 생성 = Generation of simulator motion by reconstructing camera acceleration from videolink 신수철; Shin, Su-Chul; et al, 한국과학기술원, 2014 |
1829 | 비선형 구조물의 형상 설계 민감도 해석을 위한 라그랑지언 수식화 = A lagrangian approach to shape design sensitivity analysis of nonlinear structureslink 권태수; Kwon, Tae-Soo; et al, 한국과학기술원, 1997 |
1830 | 비선형 상보성 수식에 의한 3차원 마찰 동 접촉 문제의 해석 = Analysis of three-dimensional frictional dynamic contact problems by nonlinear complementarity formulationlink 김윤혁; Kim, Yoon-Hyuk; et al, 한국과학기술원, 2000 |
1831 | 비압축성 및 압축성 3차원 navier-stokes 방정식 해석을 위한 효율적인 유한요소 알고리즘의 개발 = Development of an efficient finite element algorithm for incompressible and compressible three-dimensional navier-stokes equationslink 심은보; Shim, Eun-Bo; et al, 한국과학기술원, 1994 |
1832 | 비압축성 재생형 기계에 대한 운동량 교환 이론의 개선에 관한 연구 = Study on the improvement of momentum exchange theory for imcompressible turbomachinelink 유일수; Yoo, Il-Su; et al, 한국과학기술원, 2005 |
1833 | 비예열 시동 특성을 갖는 이원 촉매 베드 과산화수소 가스발생기 = Hydrogen peroxide gas generator with dual catalytic bed for non-preheating start-uplink 임하영; Lim, Ha-Young; et al, 한국과학기술원, 2007 |
1834 | 비예혼합 화염의 층류 부상 특성과 화염전파속도의 상관관계 및 밀도효과 규명 = (A) study on the correlation between laminar liftoff characteristics and flame propagation velocity of non-premixed flame and density effectlink 전민규; 김남일; et al, 한국과학기술원, 2018 |
1835 | 비적합 중첩 격자 유한 요소와 응집 영역 모델을 활용한 2차원 균열 진전 전산모사 = Simulation of two dimensional crack propagation using superimposed finite elements with incompatible modes and a cohesive zone modellink 김영태; Kim, Young-Tae; et al, 한국과학기술원, 2013 |
1836 | 비정렬 격자계에서 point Gauss-Seidel 방법을 위한 효율적이고 강건한 내재적 연산자 개발 = Development of efficient and robust implicit operators for point gauss-seidel method on unstructured mesheslink 김주성; Kim, Joo-Sung; et al, 한국과학기술원, 2006 |
1837 | 비정렬 격자계에서 격자간 경계 재연결에 의한 보존적 중첩 격자기법 개발 = Development of a conservative overset mesh scheme via intergrid boundary reconnection on unstructured mesheslink 정문승; Jung, Mun-Seung; et al, 한국과학기술원, 2010 |
1838 | 비정렬 격자계에서 불연속 갤러킨 기법을 이용한 hp 적응 고차 정확도 유동 해석 기법 연구 = Numerical investigation of a hp adaptive high-order accurate discontinuous galerkin method on unstructured mesheslink 이희동; Lee, Hee-Dong; et al, 한국과학기술원, 2013 |
1839 | 비정렬 격자계에서 형상 최적설계 기법을 이용한 유체기계의 캐비테이션 저감 연구 = A study about cavitation reduction of fluid machinery using a shape optimization methodologylink 안상준; An, Sang Jun; et al, 한국과학기술원, 2015 |
1840 | 비정렬 격자계에서 희박기체 유동과 연속체 유동 해석을 위한 통합 유동 해석자에 대한 연구 = (A) unified flow solver for rarefied gas and continuum flows on unstructured mesheslink 양태호; 권오준; et al, 한국과학기술원, 2019 |
1841 | 비정렬 격자를 사용한 병렬 전산 유체 해석 기법에 관한 연구 = Parallel CFD algorithms on unstructured gridslink 김성호; Kim, Sung-Ho; et al, 한국과학기술원, 1999 |
1842 | 비정렬 격자에서의 단조유선 상류차분법을 이용한 비압축성 유동의 유한요소 해석 = Incompressible flow finite element analysis using the monotone streamline upwind method for unstructured gridslink 지선구; Chee, Seon-Koo; et al, 한국과학기술원, 1998 |
1843 | 비정렬 적응 격자계를 이용한 정지비행 로터 공력의 수치적 모사 = Numerical simulation of rotor aerodynamics in hover using unstructured adaptive mesheslink 강희정; Kang, Hee-Jung; et al, 한국과학기술원, 2001 |
1844 | 비정렬 적응격자계를 이용한 효율적인 비정상 유동계산 기법개발 = Development of an efficient unsteady flow simulation technique using unstructured adaptive mesheslink 박영민; Park, Young-Min; et al, 한국과학기술원, 2003 |
1845 | 비정렬 적응격자를 이용한 에어포일 주위의 비정상 유동 해석 = Analysis of unsteady flows past airfoils on unstructured adaptive mesheslink 오우섭; Oh, Woo-Seop; et al, 한국과학기술원, 2001 |
1846 | 비정렬 혼합 격자계 유동 해석자를 이용한 헬리콥터 블레이드에 대한 수치적 연구 = Numerical investigation of helicopter blades by using an unstructured mixed mesh flow solverlink 황제영; 권오준; et al, 한국과학기술원, 2019 |
1847 | 비정렬 혼합 격자계에서 고차-고해상도의 ESWENO-P 기법에 대한 수치적 연구 = Numerical study of high-order high-resolution ESWENO-P scheme on unstructured mixed mesheslink 박상현; 권오준; et al, 한국과학기술원, 2022 |
1848 | 비정렬 혼합격자계에서 비정상 유동 해석을 위한 고차정확도 해석 기법 연구 = NumeRICAL INVESTIGATION OF A HIGH-ORDER ACCURATE METHOD FOR UNSTEADY FLOW SIMULATION ON MIXED UNSTRUCTURED MESheslink 정민규; Jung, Min-Kyu; et al, 한국과학기술원, 2014 |
1849 | 비정렬적응사변형격자와 고해상도 기법을 사용한 비정상 충격파 연구 = Unsteady shock wave dynamics using unstructured adaptive quadrilateral and high resolution schemelink 고성모; Ko, Song-Mo; et al, 한국과학기술원, 1997 |
1850 | 비정상 박리에 관한 실험적 연구 = An experimental study on unsteady separationlink 안이기; Ahn, Iee-Ki; et al, 한국과학기술원, 1995 |
1851 | 비정상 비압축성 Navier-stokes 유동을 위한 시간 정확성 모멘텀-연합 알고리즘 = Time-accurate momentum-coupled algorithm for unsteady incompressible navier-stokes flowlink 민병광; Min, Byoung-Kwang; et al, 한국과학기술원, 1997 |
1852 | 비정상 온도분포로 인한 대류발생에 관한 연구 = Onset of convection from time-depent temperature profilelink 김경훈; Kim, Kyoung-Hoon; et al, 한국과학기술원, 1985 |
1853 | 비정상 와류 유동에 의한 음향장의 수치적 연구 = Numerical study of acoustic fields generated by unsteady vortical flowslink 구삼옥; Koo, Sam-Ok; et al, 한국과학기술원, 1995 |
1854 | 비정상 유동 하의 강건 최적 설계를 위한 기법과 그 응용 연구 = Surrogate model-based robust design optimization and application to unsteady flow problemslink 권형일; Kwon, Hyung-Il; 권장혁; Kwon, Jang-Hyuk; et al, 한국과학기술원, 2014 |
1855 | 비정상 유동 해석을 위한 고차 정확도 수치기법에 대한 연구 = Study on high order accurate numerical schemes for unsteady flow analyseslink 김대희; Kim, Dae-Hee; et al, 한국과학기술원, 2005 |
1856 | 비정형 적응격자를 사용한 천음속 캐스캐이드 내부의 이상유동의 수치적 연구 = Numerial investigation of two-phase transonic cascade flows using unstructured adaptive mesheslink 박기철; Park, Ki-Cheol; et al, 한국과학기술원, 2000 |
1857 | 비행 안전을 고려한 우주발사체의 최적 단 설계 = Optimal staging design of a launch vehicle considering range safety operationslink 조병규; 안재명; et al, 한국과학기술원, 2021 |
1858 | 비행 안전을 고려한 재사용 가능 발사체의 궤적 최적화 및 착륙 유도 = Trajectory optimization and landing guidance of reusable launch vehicle considering flight safetylink 윤남경; Yoon, Nam Kyung; et al, 한국과학기술원, 2017 |
1859 | 비행체 구조 적용을 위한 전파흡수구조 제작 및 환경노출 영향에 관한 연구 = Manufacture of RAS for Flight Vehicle with the Consideration of Various Environmental Conditionslink 신재환; 김천곤; et al, 한국과학기술원, 2015 |
1860 | 비휘발성 물질을 포함한 액적의 증발현상에 관한 연구 = A study on evaporation phenomena of liquid droplet which contains nonvolatile impuritylink 김재훈; Kim, Jae-Hoon; et al, 한국과학기술원, 2007 |