Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Thesis(Ph.D)

Showing results 1741 to 1800 of 2479

1741
반용융 재료의 변형거동 모델링 및 유한요소해석 = Modeling of deformation behaivor and finite element analysis of semi-solid materialslink

윤종훈; Yoon, Jong-Hoon; et al, 한국과학기술원, 2000

1742
반응 유동장 해석을 위한 다중 비정렬 유한체적 해법의 개발 = Development of a multi-level unstructured finite volume solver for reacting flowslink

이상돈; Lee, Sang-Don; et al, 한국과학기술원, 2005

1743
반응로내 미분탄과 산화제의 혼합과 연소성능에 관한 연구 = A study on the combustion performance and mixing of pulverized coal and oxidizer in a reactorlink

조한창; Cho, Han-Chang; et al, 한국과학기술원, 1999

1744
반응사출성형에 의한 폴리우레탄 미세포 포움의 가공 = Processing of polyurethane microcellular foam by the reaction injection moldinglink

박혁; Park, Hyeog; 이대길; 윤재륜; et al, 한국과학기술원, 1995

1745
반응표면 분석법을 이용한 후방 동체-핀 왜곡모형의 보정 = Optimal aft end distorted fin model using response surface methodlink

오세윤; Oh, Se-Yoon; et al, 한국과학기술원, 2009

1746
반작용휠 사례를 통한 가진원 특성화에서의 매개변수법과 비매개변수법 비교 연구 = (A) comparative study on parametric and non-parametric approaches for vibration source characterization : case study on a reaction-wheellink

허균철; 김광준; et al, 한국과학기술원, 2019

1747
받음각을 갖는 2차원 익형주위 정상/비정상 난류유동장의 수치해석 = Analysis of the steady/unsteady turbulent flow about a two-dimensional airfoil at incidencelink

오창석; Oh, Chang-Seok; et al, 한국과학기술원, 1996

1748
발전설비용 대형 틸팅패드 저어널 베어링에 관한 연구 = A study on large tilting pad journal bearings for electric power plantslink

하현천; Ha, Hyun-Cheon; et al, 한국과학기술원, 1994

1749
발전용 대형 유류버너에서 비대칭 공기 공급에 의한 연소환경 변화 = Effects of the axi-asymmetrical air supply on combustion phenomena inside the oil-fired burner and furnace for power plantlink

고영건; Go, Young-Gun; et al, 한국과학기술원, 2009

1750
배기 다기관 설계를 위한 열피로 손상 지수 개발 = Development of a thermal fatigue damage index(TFDI) for exhaust manifold designlink

박관흠; Park, Kwan-Hum; et al, 한국과학기술원, 2003

1751
배기 열교환기를 이용한 가솔린 엔진 촉매 열열화 방지 및 연비 개선 = Application of an exhaust heat exchanger to protect the catalyst and improve the fuel economy in a spark-ignition enginelink

이석환; Lee, Seok-Hwan; et al, 한국과학기술원, 2005

1752
백색광 주사 간섭계를 이용한 표면 형상 측정 알고리즘에 관한 연구 = An algorithm of surface heights measurement based-on white-light scanning interferometrylink

강민구; Kang, Min-Gu; et al, 한국과학기술원, 1999

1753
백색광 주사 간섭법을 이용한 박막의 두께 형상 측정 = Thin-film thickness profile measurement using white-light scanning interferometrylink

김기홍; Kim, Gee-Hong; et al, 한국과학기술원, 2000

1754
백색광 주사간섭계의 측정정밀도 개선에 대한 연구 = Improvement of 3-dimensional profile measuring accuracy for white-light scanning interferometrylink

박민철; Park, Min-Cheol; et al, 한국과학기술원, 2000

1755
범프 타입 포일 저널 베어링의 성능 해석에 관한 연구 = A study on the performance analysis of bump type foil journal bearingslink

이동현; Lee, Dong-Hyun; et al, 한국과학기술원, 2009

1756
베어링 입구에서 발생하는 선단압력에 관한 연구 = A study on the inlet perssure build-up at bearing entrancelink

김종수; Kim, Jong-Soo; et al, 한국과학기술원, 1991

1757
벡타형 4단 정수법을 이용한 다중 입출력 기계계의 해석 = Analysis of the MIMO mechanical system using the vectorial four pole parameter methodlink

하재용; Ha, Jae-Yong; et al, 한국과학기술원, 1994

1758
벤츄리 스크러버 집진장치의 삼상 유동에 대한 수치 모델링과 성능해석 = Numerical modeling for performance analysis of three-phase flow in venturi scrubberlink

박순일; Pak, Sun-Il; et al, 한국과학기술원, 2005

1759
벽 근방의 서로 근접한 평판들에 작용하는 유체역학적 힘 : 멤즈기구에 작용하는 저항력 예측 = Hydrodynamic force on closely arrayed plates near the plane wall : estimation of drag on MEMS devicelink

박선홍; Park, Sun-Hong; et al, 한국과학기술원, 2006

1760
벽면과 평행하게 분출하는 2차원 벽부착 제트 유동의 난류 유동 특성 = Investigation on the turbulence structure of a wall-attaching offset jetlink

윤순현; Yoon, Soon-Hyun; et al, 한국과학기술원, 1991

1761
벽면제트의 안정성에 대한 부력의 효과 = Buoyancy effects on the stability of a wall-jetlink

차정훈; Cha, Jeong-Hoon; et al, 한국과학기술원, 2006

1762
변분 방식에 의한 쉘 구조 형상 민감도 해석 및 최적 설계 = Shape sensitivity and optimization of thin shell structures by variational methodslink

이신섭; Lee, Shin-Sup; et al, 한국과학기술원, 1991

1763
변위 입력 주도형 마찰 접촉 수식화에 의한 비납땜형 커넥터의 해석 = Simulation of solderless pin connection using frictional contact mechanics with displacement inputlink

황건; Hwang, Gunn; et al, 한국과학기술원, 1999

1764
변형률속도와 결정립 크기의 영향을 고려한 고 실리콘 전기강판의 DBTT 예측 모델 = Semi-empirical model considering the strain rate and grain size for the ductile-to-brittle transition temperature of high-Si electrical steel sheetslink

권준범; Kwon, Junbeom; et al, 한국과학기술원, 2017

1765
병렬화된 직접모사법을 이용한 극음속 외부 대기와 측면 제트 상호 작용에 대한 연구 = Analysis of the interaction between hypersonic free stream and side jet flow using a parallel DSMC methodlink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 2005

1766
보강된 구조물의 효율적인 해석을 위한 비선형 셸 요소 = An effective non-linear shell element for the analysis of stiffened structureslink

이원재; Lee, Won-Jae; et al, 한국과학기술원, 2002

1767
보강된 복합적층 판넬의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of stiffened laminated composite panelslink

이인철; Lee, In-Cheol; et al, 한국과학기술원, 1995

1768
보이스 코일 구동기의 원리를 이용한 새로운 스피리컬 모터의 설계와 제어에 관한 연구 = Design and control of a new spherical motor using principle of voice coil actuatorlink

김현창; Kim, Hyun-Chang; et al, 한국과학기술원, 2013

1769
보이스 코일 모터와 할바흐 자석 배열 선형 모터를 이용한 초정밀 이중 서보 스테이지 설계와 제어에 관한 연구 = Design and control of ultra-precision dual servo stage using voice coil motor and halbach magnet array linear motorlink

김기현; Kim, Ki-Hyun; et al, 한국과학기술원, 2006

1770
보조케이블을 가진 컨테이너 크레인의 정·동적 거동해석 및 제어에 관한 연구 = Kinematic-dynamic analysis and control of container crane with auxiliary cableslink

김두형; Kim, Doo-Hyeong; et al, 한국과학기술원, 2003

1771
보행로보트의 강인한 동적 걸음새의 설계에 관한 연구 = A study for the design of a robust dynamic gait of a walking robotlink

서영진; Seo, Young-Jin; et al, 한국과학기술원, 1995

1772
보행의도 검출에 기반한 하지 근력증강 외골격 로봇 시스템에 관한 연구 = Study of the lower limb exoskeleton robot system based on the detection of lower limb movement intentionlink

차도완; Cha, Do-Wan; et al, 한국과학기술원, 2014

1773
복동형 유.공압 완충장치의 동적 특성 분석 및 헬기 지상공진에의 적용 = Analysis of double-stage oleo-pneumatic shock absorber and application to rotorcraft against ground resonancelink

이윤규; Lee, Yoon-Kyu; et al, 한국과학기술원, 2010

1774
복사 효과를 고려한 축 대칭 고체 로켓 모터의 점화 현상에 관한 수치적 연구 = A numerical simulation of axisymmetric solid rocket motor ignition transient with radiation effectlink

조인현; Cho, In-Hyun; et al, 한국과학기술원, 1997

1775
복사와 대류에 의한 사각 밀폐공간내 고체연료의 점화에 관한 연구 = Analysis on the radiative and convective ignition of the solid fuel in a confined rectangular enclosurelink

김택영; Kim, Taik-Young; et al, 한국과학기술원, 1993

1776
복사효과를 고려한 연속체 및 분자류 영역에서의 음파의 전파특성에 관한 연구 = Radiation-affected characteristics of sound wave propagation in continuum and molecular flow regimelink

박재현; Park, Jae-Hyun; et al, 한국과학기술원, 2002

1777
복소 유전율 모델을 활용한 전자파 흡수 복합재료 적층판 설계 = Design of microwave absorbing composite laminates by using semi-empirical permittivity modelslink

김진봉; Kim, Jin-Bong; et al, 한국과학기술원, 2008

1778
복열식 2단 맥동관 냉동기 = Recuperative two-stage pulse tube refrigeratorlink

정제헌; Jung, Je-Heon; et al, 한국과학기술원, 2008

1779
복잡한 3차원 압축성 유동문제를 위한 효율적인 비정렬 적응격자기법의 개발 = Development of an efficient unstructured adaptive mesh technique for the complicated three-dimensional compressible flow problemslink

김종관; Kim, Jong-Kwan; et al, 한국과학기술원, 1994

1780
복잡한 차체부재의 박판성형공정을 위한 유한요소 역해석 및 초기추측치 계산 = Finite element inverse approach and initial guess generation for sheet metal forming anaysis of complicated auto-body memberslink

김승호; Kim, Seung-Ho; et al, 한국과학기술원, 2003

1781
복잡한 형상 내 고체 연료의 연소 현상 해석 = A numerical study on the combustion characteristics of solid fuel in a complex geometrylink

손영민; Sohn, Young-Min; et al, 한국과학기술원, 2002

1782
복합 격자구조에서 일어나는 전자기 공진 현상 및 이를 이용한 태양열 흡수체 설계 = Electromagnetic resonance phenomena on complex grating and design of solar thermal absorber using complex gratinglink

한선우; Han, Sunwoo; et al, 한국과학기술원, 2016

1783
복합 다양체 솔리드 모델러의 자료구조 = Data structures for non-manifold solid modelerslink

최국헌; Choi, Guk-Heon; et al, 한국과학기술원, 1999

1784
복합곡면 형상의 역공학에 관한 연구 = A study on reverse engineering for objects composed of compound surfaceslink

이응기; Lee, Eung-Ki; et al, 한국과학기술원, 1999

1785
복합사이클 발전플랜트의 폐열회수 보일러 최적화 = Optimization of heat recovery steam generator for combined cycle power plantslink

인종수; In, Jong-Soo; et al, 한국과학기술원, 2008

1786
복합식 태양열 발전 시스템 연구 = Investigation of hybrid system for photovoltaic power generation with solar heatinglink

이동일; Lee, Dong Il; et al, 한국과학기술원, 2015

1787
복합재 구조물의 변형률과 고주파 진동의 동시 측정을 위한 광섬유 브래그 격자 센서 시스템의 개발 = Development of fiber bragg grating sensor system for the simultaneous measurement of strain and high-frequency vibration in composite structureslink

고종인; Koh, Jong-In; et al, 한국과학기술원, 2004

1788
복합재 구조의 레이저 NDE/SHM을 위한 다중 압전 센서의 직/병렬 센싱 = Serial/parallel sensing technique with multiple piezoelectric sensors for laser NDE/SHM on composite structureslink

최윤실; 이정률; et al, 한국과학기술원, 2019

1789
복합재 압력용기의 기하학적 비선형및 재료 비선형 해석 = Geometrically and materially nonlinear analysis for composite pressure vessellink

도영대; Doh, Young-Dae; et al, 한국과학기술원, 1995

1790
복합재 적층판을 이용한 전자기파 흡수 구조체의 설계 = Design of electromagnetic wave absorbing structure using layered composite plateslink

오정훈; Oh, Jung-Hoon; et al, 한국과학기술원, 2003

1791
복합재 적층판의 기계적 체결부에 대한 파손해석 = Failure analysis for mechanically fastened joints in composite laminateslink

박흥준; Park, Heung-Joon; et al, 한국과학기술원, 2000

1792
복합재 전자파 흡수 구조에서의 층간분리에 따른 현상 = Effect of delamination on composite radar absorbing structureslink

은세원; Eun, Se-Won; et al, 한국과학기술원, 2016

1793
복합재 패치 접착 수리된 알루미늄 판의 피로균열 진전거동 및 균열 감시 = Fatigue crack growth behavior and crack monitoring of cracked aluminum plate with bonded composite patch repairlink

서대철; Seo, Dae-Cheol; et al, 한국과학기술원, 2002

1794
복합재료 면재를 갖는 샌드위치 평판의 탄성 및 점탄성 해석 = Elastic/viscoelastic analysis of sandwichplates with composite faceslink

김천곤; Kim, Chun-Gon; et al, 한국과학기술원, 1987

1795
복합재료 샌드위치 구조용 기계적 접합부의 피로 및 충격 특성에 관한 연구 = A study on the fatigue and impact characteristics of the mechanical joints for composite sandwich structureslink

임태성; Lim, Tae-Seong; et al, 한국과학기술원, 2004

1796
복합재료 쉘 공기 저널베어링-스핀들 시스템에 관한 연구 = A study on the composite shell air journal bearing and spindle systemlink

방경근; Bang, Kyung-Geun; et al, 한국과학기술원, 2002

1797
복합재료 직교적층판의 모재균열 증가와 강성저하에 관한 연구 = Progressive transverse cracking and stiffness reduction in cross-ply laminated compositeslink

이재화; Lee, Jae-Hwa; et al, 한국과학기술원, 1992

1798
복합재료내를 전파하는 탄성파의 다중산란 및 분산 해석 = Analysis of multiple scattering and dispersion of elastic waves propagating in composite materialslink

김진연; Kim, Jin-Yeon; et al, 한국과학기술원, 1994

1799
복합재료를 사용한 자동차용 동력전달축의 설계와 제작에 관한 연구 = Design and manufacture of the composite automotive driveshaftlink

조덕현; Cho, Durk-Hyun; et al, 한국과학기술원, 2000

1800
복합재료의 모재파손 시 광섬유센서의 신호특성에 관한 연구 = Signal characteristics of fiber optic sensor under matrix failures of compositeslink

박중완; Park, Joong-Wan; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0