1674 | 마그네시아-부분 안정화 지르코니아의 시효처리 효과에 관한 연구 = A study on the aging effect of Mg-PSZlink 남인준; Nam, In-Joon; 김종희; 김호기; et al, 한국과학기술원, 1986 |
1675 | 마그네시아-부분 안정화 지르코니아의 파괴인성 증진 거동에 관한 연구 = Study on the toughening behavior of Mg-PSZlink 김도형; Kim, Do-Hyeong; et al, 한국과학기술원, 1985 |
1676 | 마그네트론 스퍼터링에서의 타겟 식각 및 박막 증착에 관한 연구 = Study on the target erosion and film deposition in magnetron sputtering systemlink 최선희; Choi, Sun-Hee; et al, 한국과학기술원, 2003 |
1677 | 마스크 없는 Pendeo epitaxy 공정에 의한 저결함 GaN 박막의 미세구조 연구 = Microstructural characterization of the low dislocation density GaN films grown by maskless pendeo epitaxylink 박동준; Park, Dong-Jun; et al, 한국과학기술원, 2004 |
1678 | 마이크로 마그네틱스 모델을 이용한 수직 자기 기록 매체의 열 특성해석 = Analysis of ther-mal after-effect of perpendicular magnetic recording media by using micromagnetics model with monte carlo methodlink 강병훈; Kang, Byung-Hoon; et al, 한국과학기술원, 1997 |
1679 | 마이크로 머신 소자(MEMS) 패키지의 열응력에 대한 연구 = A study on the thermo-mechanical stress of MEMS device packageslink 전우석; Jeon, Woo-Seok; et al, 한국과학기술원, 1998 |
1680 | 마이크로 스트럭쳐 GaN 기술을 이용한 생체 이식형 flexible LED bio-sensor = Implantable, flexible LED bio-sensor using μs-GaN technologylink 이상용; Lee, Sang-Yong; et al, 한국과학기술원, 2011 |
1681 | 마이크로 스트럭쳐 GaN 기술을 이용한 생체 이식형 flexible LED bio-sensor = Implantable, flexible LED bio-sensor using μs-GaN technologylink 이상용; Lee, Sang-Yong; et al, 한국과학기술원, 2011 |
1682 | 마이크로마그네틱스 모델을 이용한 수평 자기 기록 매체의 노이즈 특성 해석 = Analysis of noise characteristics of longitudinal magneitc recording media by using micromagnetics modellink 이경진; Lee, Kyoung-Jin; et al, 한국과학기술원, 1996 |
1683 | 마이크로스트럭쳐 반도체 기술을 이용한 1D-1R 구조의 플렉서블 RRAM의 제작 및 특성평가 = Fabrication and characterization of 1D-1R structure flexible RRAM on plastic substrate using $\mu s$-Sc technologylink 유현균; Yoo, Hyeon Gyun; et al, 한국과학기술원, 2012 |
1684 | 마이크로스트럭쳐 반도체 기술을 이용한 1T-1R 구조의 플렉서블 ReRAM의 제작 및 특성평가 = Fabrication and characterization of flexible 1T-1R structure ReRAM on plastic substrate using μs-Sc technologylink 김승준; Seung-Jun Kim; et al, 한국과학기술원, 2011 |
1685 | 마이크로스트럭쳐 반도체 기술을 이용한 1T-1R 구조의 플렉서블 ReRAM의 제작 및 특성평가 = Fabrication and characterization of flexible 1T-1R structure ReRAM on plastic substrate using μs-Sc technologylink 김승준; Seung-Jun Kim; et al, 한국과학기술원, 2011 |
1686 | 마이크로파 동조 디바이스 응용을 위한 Mn 도핑된 BST 박막의 특성 평가에 관한 연구 = A study on characterization of Mn-doped $(Ba,Sr)TiO_3$ thin films for microwave tunable device applicationslink 김난영; Kim, Ran-Young; et al, 한국과학기술원, 2004 |
1687 | 마이크로파를 이용한 질화규소 세라믹스의 소결에 관한 연구 = A study on the microwave sintering of $Si_3N_4$ ceramicslink 이병학; Lee, Byung-Hak; et al, 한국과학기술원, 1995 |
1688 | 마이크론 구조물의 도입으로 인한 박막형광체의 발광특성 개선에 관한 연구 = Improvement of luminescent properties of inorganic thin film phosphor via introduction of micron-size structures in phosphor layerlink 한지연; Han, Ji-Yeon; et al, 한국과학기술원, 2008 |
1689 | 말단기 변환을 통한 Poly(glycidyl nitrate)의 열적 저장성 개선 = Improved thermal stability of poly(glycidyl nitrate) by end group modificationlink 박찬식; Park, Chan-Sik; et al, 한국과학기술원, 1997 |
1690 | 말단이 개방된 탄소나노튜브 어레이와 리튬이온전지로의 응용에 관한 연구 = Open-ended carbon nanotube array for lithium-ion batterylink 권준; Kwon, Joon; et al, 한국과학기술원, 2012 |
1691 | 말론산에서 양극산화법을 이용한 산화티타늄 나노튜브의 제조 및 구리도금용 기판 응용에 대한 연구 = Fabrication of highly ordered $TiO_2$ nanotube in malonic acid solution by anodizing and its application as a substrate for electroplating of Culink 류원희; Hee, Ryu-Won; et al, 한국과학기술원, 2007 |
1692 | 메탄/수소/아르곤/산소 계에서 마이크로웨이브 플라즈마 화학증착법을 이용한 다이아몬드 합성에 관한 연구 = A study on the diamond synthesis by the microwave plasma CVD in the $CH_4/H_2/Ar/O_2$ systemslink 한영수; Han, Young-Su; et al, 한국과학기술원, 1996 |
1693 | 모폴로지와 결정립 크기 제어를 통한 페로브스카이트 발광다이오드 효율 향상에 관한 연구 = Control of morphology and grain size for efficient perovskite light-emitting diodeslink 문창윤; 김상욱; et al, 한국과학기술원, 2017 |
1694 | 무-유기 하이브리드 재료의 친수성 코팅 = Hydrophilic coatings of inorganic-organic hybrid materialslink 어영주; Eo, Young-Joo; et al, 한국과학기술원, 1999 |
1695 | 무기나노구조 제조를 위한 블록공중합체/금속나노입자의 혼성 자기조립 = Hybrid self-assembly of block copolymer - metal nanoparticle mixture for fabrication of inorganic nanostructureslink 이형민; Lee, Hyung-Min; et al, 한국과학기술원, 2009 |
1696 | 무연 솔더와 무전해 니켈-인 하부금속 층간의 계면 반응과 솔더 조인트에 미치는 비스무스 합금의 영향 = Effects of Bi on interfacial reaction and bump strength in electroless Ni-P UBM/ Pb-free solder bumpslink 조문기; Cho, Moon-Gi; et al, 한국과학기술원, 2004 |
1697 | 무연솔더 접합부에서의 계면 반응과 기계적 신뢰성과의 연관성에 관한 연구 = A study on correlation between interfacial reaction and mechanical reliability of pb-free solder jointlink 고용호; Ko, Yong-Ho; et al, 한국과학기술원, 2006 |
1698 | 무연솔더와 PCB 표면금속층과의 젖음성 및 신뢰성에 관한 연구 = A comparative study of the effect of PCB surface finish on the mechanical reliability of solder joints in micro electronic packaginglink 지영근; Jee, Young-Kun; et al, 한국과학기술원, 2006 |
1699 | 무연솔더와 도금된 구리배선에서 전류의 영향에 의한 계면반응의 변화에 관한 연구 = Effect of electromigration on interfacial reaction between electroplated Cu Pad with SPS and Pb-free solder jointlink 강현우; Kang, Hyun-woo; et al, 한국과학기술원, 2009 |
1700 | 무전해 니켈 도금법을 이용한 플립칩 접속용 범프 및 하부금속층에 관한 연구 = A study on the Ni flip chip bumps and under bump metallurgy formation using electroless Ni plating methodslink 전영두; Jeon, Young-Doo; et al, 한국과학기술원, 2000 |
1701 | 무전해 도금 조건이 Co-P 촉매의 미세구조 및 알칼리 $NaBH_4$ 용액의 수소발생특성에 미치는 영향 = Effects of electroless deposition conditions on microstructures of Co-P catalysts and their hydrogen generation properties by hydrolysis of $NaBH_4$link 엄광섭; Eom, Kwang-Sup; et al, 한국과학기술원, 2006 |
1702 | 미량의 바나듐첨가가 공석강의 조직및 기계적 성질에 미치는 영향 = A study on the effect of small addition of vanadium on the microstructures and mechanical properties in eutectoid steellink 김창진; Kim, Chang-Jin; et al, 한국과학기술원, 1985 |
1703 | 미량합금원소 첨가및 제어압연한 Fe-30Mn-5Al-0.3C-X 합금강의 저온에서의 기계적 성질에 관한 연구 = A study on the low temperature mechanical properties of microalloyed and controlled rolled Fe-30Mn-0.3C-X alloy steellink 박이식; Park, Yee-Sik; et al, 한국과학기술원, 1985 |
1704 | 미세 패터닝을 위한 광 개시제 첨가 솔-젤 하이브리드 재료의 광화학 현상 = Photochemical phenomenon of photoinitiator doped sol-gel hybrid materials for micro-patterninglink 김선주; Kim, Sun-Joo; et al, 한국과학기술원, 2004 |
1705 | 미세결정질을 함유한 수소화된 비정질 실리콘(a-Si:H) 박막의 결정화 거동에 관한 연구 = A study on the crystallization behavior of hydrogenated amorphous silicon (a-Si:H) films containing microcrystalline silicon(μc-Si)link 김건옥; Kim, Kun-Ok; et al, 한국과학기술원, 1996 |
1706 | 미세구조 및 첨가물이 강유전체 세라믹스의 photovoltaic 특성에 미치는 영향 = Effect of microstructure and impurity on photovoltaic properties in ferroelectric ceramicslink 김성렬; Kim, Sung-Ryul; et al, 한국과학기술원, 1998 |
1707 | 미세구조 변화에 따른 $YBa_2Cu_3O_{7-x}$ 초전도체 박막을 이용한 적외선 검지소자의 검지특성변화 = Effects of microstructure on the detection characteristics of $YBa_2Cu_3O_{7-x}$ thin film infrared detectorlink 배성준; Bae, Sung-Joon; et al, 한국과학기술원, 1995 |
1708 | 미세조직이 무연 솔더의 크리프 성질에 미치는 영향 = The effect of microstructure on the creep behavior of the lead-free solderslink 주대권; Joo, Dae-Kwon; et al, 한국과학기술원, 2002 |
1709 | 바리움페라이트 영구자석에서 성분비와 소결조건에 따른 치수의 변화와 자기적 성질에 관한 연구 = The effect of chemical composition and sintering condition on dimensional changes and magnetic properties of barium ferrite permanent magnetlink 강석중; Kang, Suck-Joong; et al, 한국과학기술원, 1975 |
1710 | 박막전지를 위한 역반구 구조를 갖는 $Li_4Ti_5O_{12}$ 음극의 제조와 물성에 관한 연구 = Synthesis and properties of the inverse hemispheric structured $Li_4Ti_5O_{12}$ anode for the thin film batterylink 이성제; Lee, Sung-Je; et al, 한국과학기술원, 2009 |
1711 | 반도체 브리지의 특성에 관한 연구 = A study on the characteristics of semiconductor bridge (SCB)link 박명일; Park, Myung-Il; et al, 한국과학기술원, 2001 |
1712 | 반용융 Zn-40%Sn 합금의 점도 측정 및 조직에 관한 연구 = Viscosity measurement and structure of partially solidified Zn-40%Sn alloylink 한관희; Han, Kwan-Hee; et al, 한국과학기술원, 1979 |
1713 | 반응 결합 질화규소의 소결현상에 관한 연구 = A study on the sintering phenomena of reaction bonded silicon nitridelink 이충국; Lee, Chung-Goog; et al, 한국과학기술원, 1985 |
1714 | 반응결합 질화규소의 소결시 규소의 거동에 관한 연구 = A study on the behaviour of Si during sintering of reaction bonded silicon nitridelink 김재룡; Kim, Jae-Ryong; 김종희; 김호기; et al, 한국과학기술원, 1986 |
1715 | 반응성 CVD를 이용한 다결정 실리콘 기판에서의 $CoSi_2$ layer의 성장거동과 열적 안정성에 관한 연구 = Growth behavior and thermal stability of $CoSi_2$ layer on poly-Si substrate using reactive chemical vapor depositionlink 김선일; Kim, Sun-Il; et al, 한국과학기술원, 2001 |
1716 | 반응성 스퍼터링 방법으로 PET필름상에 제조한 ITO박막의 전기 및 광학적 특성 = Electrical and optical properties of Reactive sputtered ITO thin films on PET filmslink 김인호; Kim, In-Ho; et al, 한국과학기술원, 1999 |
1717 | 반응성 스퍼터링 방법으로 제조시 스퍼터 파라메터가 ITO 박막의특성에 미치는 영향 = Effects of sputtering parameter on properties of ITO film formed by an reactive sputteringlink 오경수; Oh, Kyung-Soo; et al, 한국과학기술원, 1995 |
1718 | 반응성 스퍼터링법에 의한 $Pb(Zr,Ti)O_3$ 압전 박막의 제조 및 특성평가 = Preparation and characterization of $Pb(Zr,Ti)O_3$ piezoelectric thin films by reactive sputteringlink 김혁환; Kim, Hyuk-Hwan; et al, 한국과학기술원, 2001 |
1719 | 반응성 스퍼터링법에 의해 제조된 PZT박막에 Ta첨가의 영향에 관한 연구 = A study on effects of Ta addition in PZT thin films by reactive sputteringlink 최광표; Choi, Gwang-Pyo; et al, 한국과학기술원, 1996 |
1720 | 반응성 스퍼터링법으로 제조한 $PbTiO_3$ 박막의 응력분포에 따른 배향성의 변화에 관한 연구 = A study on stress distribution dependence of orientation ratio in $PbTiO_3$ thin film deposited by reactive sputteringlink 최원경; Choi, Won-Kyung; et al, 한국과학기술원, 1997 |
1721 | 반응성 스퍼터링법으로 증착된 코발트 나이트라이드(Co-N) 박막을 이용한 (100) Si 기판에서의 $CoSi_{2}$ 에피층 형성에 관한 연구 = Formation of epitaxial $CoSi_{2}$ layer on (100) Si substrate using cobalt nitride(Co-N) film deposited by reactive sputteringlink 이승렬; Lee, Seung-Ryul; et al, 한국과학기술원, 2004 |
1722 | 반응소결된 $Al_2O_3-ZrO_2-Nb$ 복합체의 미세구조와 기계적 성질 = Microstructure and mechanical properties of $Al_2O_3-ZrO_2-Nb$ composite prepared by reaction sinteringlink 이수민; Lee, Soo-Min; et al, 한국과학기술원, 1990 |
1723 | 반응소결된 텅스텐 나노복합재료의 기계적 특성에 미치는 미세조직의 영향 연구 = Effects of microstructures on mechanical properties of reactive sintered tungsten nanocompositeslink 이동주; Lee, Dong-Ju; et al, 한국과학기술원, 2010 |
1724 | 방향성 규소강판에서 Forsterite coating 한 후의 자기적 성질의 변화 = The change in magnetic properties after forsterite coating in grain-oriented silicon steellink 성기숙; Sung, Gi-Suk; et al, 한국과학기술원, 1985 |
1725 | 방향성 규소강판에서 냉간압연이 2차 재결정과 자기적 성질에 미치는 영향 = Effect of cold rolling on secondary recrystallization and magnetic properties in grain-oriented silicon steellink 박성욱; Park, Sung-Woock; et al, 한국과학기술원, 1984 |
1726 | 방향성 규소강판에서 열간압연 예비소둔온도 및 균질화 열처리 온도가 자기적 성질에 미치는 영향 = Effects of soaking and normalizing temperatures on magnetic properties in grain-oriented silicon steellink 이종학; Lee, Jong-Hak; et al, 한국과학기술원, 1984 |
1727 | 배향성 YBCO후막의/MgO단결정의 제조 및 초전도 특성 분석에 관한 연구 = A study on the fabrication and superconductivity of textured YBCO thick films/MgO single crystalslink 김유진; Kim, Eu-Gene; et al, 한국과학기술원, 2000 |
1728 | 백색광소결 프로세서를 이용한 은 나노 와이어 복합체의 접촉저항 감소와 투명히터로서의 응용 = Reduced contact resistance of silver nanowire composites using in-tense pulsed light and application for transparent heaterslink 양승복; Yang, Seung-Bok; et al, 한국과학기술원, 2013 |
1729 | 베타 알루미나 고체전해질과 다공성 YSZ 보조상을 이용한 저온 산소센서에 대한 연구 = Oxygen sensor for the low temperature-measurement using Na β-β" alumina electrolyte and porous yttria stabilized zirconia(YSZ) auxiliary phaselink 박진수; Park, Jin-Su; et al, 한국과학기술원, 2004 |
1730 | 보상소자를 이용한 산화물 반도체식 센서의 선택성 향상에 관한 연구 = A study on the selectivity improvement of semi-conductor type sensor using compensating devicelink 배정석; Bae, Jung-Suk; et al, 한국과학기술원, 2000 |
1731 | 복합솔더 제조 및 리플로우 솔더링 특성 = The manufacture of composite solder and its reflow soldering characteristicslink 황성용; Hwang, Seong-Yong; et al, 한국과학기술원, 2002 |
1732 | 볼밀링과 마이크로파 가열을 이용한 $LiCoPO_4$ 의 합성 및 그 전기화학적 특성향상에 관한 연구 = Synthesis of $LiCoPO_4$ by ball-milling and microwave heating, and improvement of its electrochemical propertieslink 한동욱; Han, Dong-Wook; et al, 한국과학기술원, 2007 |
1733 | 부분 상변태된 seed 종자 입자가 SiC 의 미세구조에 미치는 영향 = Effect of partially transformed seed particles on microstructure of silicon carbidelink 구봉진; Ku, Bong-Jin; et al, 한국과학기술원, 1997 |