Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 1501 to 1560 of 1858

1501
온도 역계산을 위한 $CO_2$ 4.3μm 밴드의 복사 모델링 연구 = Radiation modeling of $CO_2$ 4.3μm band for temperature inversionlink

양수석; Yang, Soo-Seok; et al, 한국과학기술원, 1999

1502
온도구배가 있는 수평유체층 내의 전기유체역학적 대류 = Electrohydrodynamic convection in a horizontal fluid layer with temperature gradientlink

고형종; Ko, Hyung-Jong; et al, 한국과학기술원, 1988

1503
와류노즐로부터 분사되는 액막의 미립화에 관한 연구 : 주위 기체의 응축에 따른 효과 = Atomization of liquid sheet discharged from swirl nozzle-effect of ambient vapor condensationlink

고광웅; Koh, Kwang-Uoong; et al, 한국과학기술원, 2003

1504
외란 추정기를 이용한 비 구형 기어 브레이크 시스템의 제동 토크 적응 제어 = Adaptive braking torque control of electronic non-circular gear brake system using disturbance observerlink

박희람; Park, Heeram; et al, 한국과학기술원, 2017

1505
외부 가압 공기 베어링의 능동 제어에 관한 연구 = A study on active control of externally pressurized air bearingslink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1998

1506
외부 트리거링 신호를 이용한 비전 기반의 하이퍼-나이키스트 주파수 대역 모드해석 기법 = Vision-based modal analysis for hyper-Nyquist frequency range using external triggering signallink

김동현; 박영진; et al, 한국과학기술원, 2023

1507
외부가압 공기저어널베어링의 안정성 및 회전정밀도에 관한 연구 = A study on the stability and rotational accuracy of externally pressurized air journal bearinglink

김금모; Kim, Keum-Mo; et al, 한국과학기술원, 1992

1508
외연적 유한요소법을 이용한 차체 구조물의 충돌해석 = Crash analysis of auto-body structures with an explicit finite element methodlink

강우종; Kang, Woo-Jong; et al, 한국과학기술원, 2000

1509
용액 공정에 의한 고효율 고분자 발광 다이오드에 관한 연구 = A study on high-efficiency polymer light-emitting diodes fabricated by solution processeslink

윤홍석; Youn, Hong-Seok; et al, 한국과학기술원, 2011

1510
용액공정을 이용한 유기발광 다이오드용 WO3/Ag/WO3 다층투명전극에 관한 연구 = A study on solution-processed WO3/Ag/WO3 multilayer transparent electrode for organic light-emitting diodeslink

전강민; Jeon, Kang-Min; et al, 한국과학기술원, 2012

1511
용융탄산염 연료전지 스택의 균일화를 위한 3차원 유동 해석 = Three-dimensional fluid flow analysis for flow uniformity of molten carbonate fuel cell stacklink

김형섭; Kim, Hyung-Sop; et al, 한국과학기술원, 2014

1512
운전자 주시거리와 인체응답 연구에 기반한 인간의 조향 특성에 가까운 운전자 모델 개발 = Development of driver model close to human driving characteristics based on driverlink

노기한; Noh, Ki-Han; et al, 한국과학기술원, 2013

1513
원격로봇수술을 위한 작업공간전환기능을 갖춘 수술 작동기의 설계 및 평가 = Design and evaluation of a surgical manipulator with workspace-conversion ability for telerobotic surgerylink

김기영; Kim, Ki-Young; et al, 한국과학기술원, 2012

1514
원심 임펠러의 내부 유동장에 근거한 이론적인 미끄럼 계수와 최적 디퓨저 설계 절차의 개발 = An analytical slip factor based on an internal flow field for centrifugal impellers and development of optimum design procedure for diffuserlink

팽기석; Paeng, Kee-Seok; et al, 한국과학기술원, 2001

1515
원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink

오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006

1516
원자 모사를 이용한 나노 와이어 안정성에 관한 연구 = Study on the stability of nanowires using atomistic simulationslink

임영태; Im, Young-Tae; et al, 한국과학기술원, 2009

1517
원전의 압력경계 구조물에서 위그너-빌 분포를 이용한 충격 발생위치 추정 = An impact source localization using wigner-ville distribution on nuclear power plant pressure boundary structureslink

박진호; Park, Jin-Ho; et al, 한국과학기술원, 2006

1518
원통연삭작업의 시뮬레이션에 관한 연구 = A study on simulation of cylindrical grindinglink

이응숙; Lee, Eung-Sook; 양민양; 이재경; et al, 한국과학기술원, 1997

1519
원통형 적층 쉘에 의한 음파의 공명 산란 = Acoustic resonance scattering from multilayered cylindrical shellslink

주영상; Joo, Young-Sang; et al, 한국과학기술원, 1998

1520
원형 개재물과 무한기지내 균열 간의 상호작용에 관한 연구 = Interaction between a circular inclusion and an arbitrarily oriented crack under mechanical and thermal loadinglink

정대율; Chung, Dae-Youl; et al, 한국과학기술원, 2001

1521
원형 진동판을 기반으로 제작된 압전 마이크로폰 = Piezoelectric microphone built on circular diaphragmlink

이운섭; Lee, Woon-Seob; et al, 한국과학기술원, 2008

1522
원호계면균열을 갖는 섬유강화 복합재료의 L 적분을 이용한 횡방향 유효탄성계수 연구 = Estimation of effective transverse elastic moduli by L integral in fiber reinfroced composite having circular-arc shaped interfacial crackslink

김상열; Kim, Sang-Yeol; et al, 한국과학기술원, 1994

1523
웨이퍼 접합 시험에서의 파괴역학적 응용 연구 = An application of fracture mechanics to wafer bonding testlink

문호정; Moon, Ho-Jeong; et al, 한국과학기술원, 1998

1524
웹 서비스 환경에서 데이터 중심 인터페이스를 이용한 CAD 모델 정보의 획득 = Retrieval of CAD model data using data-centric interface in web services environmentslink

김병철; Kim, Byung-chul; et al, 한국과학기술원, 2008

1525
위상 잠금된 안정화 펨토초 레이저의 반복율 변화에 의한 광대역 퓨리에 분광 LIDAR = Phase-locked fr-sweeping Fourier transform spectroscopy for broadband femtosecond LIDARlink

이근우; Lee, Keun Woo; et al, 한국과학기술원, 2015

1526
위상천이 모아레토포그라피를 이용한 3차원물체의 미세형상측정 = Phase-shifting moire topography for precision measurement of 3-dimensional profileslink

최이배; Choi, Yi-Bae; et al, 한국과학기술원, 1998

1527
위상천이 회절격자 간섭계 = Phase shifting diffraction grating interferometerlink

황태준; Hwang, Tae-Joon; et al, 한국과학기술원, 2003

1528
위상평면을 이용한 퍼지제어기 설계 및 유압 서보 시스템에의 적용 = Fuzzy controller design using phase plane with its application to electro-hydraulic servo systemlink

이상열; Lee, Sang-Yeal; et al, 한국과학기술원, 1999

1529
위성체 내 파이로충격 원천 차단을 위한 절연기 개발 = Development of an isolator for source isolation for pyroshock in satellitelink

정주원; Jeong, Juwon; et al, 한국과학기술원, 2017

1530
위치 예측 시뮬레이터를 이용한 인터넷 로봇 시스템의 거리 오차 보상 = Distance error compensation of internet-based robot system using position prediction simulatorlink

이강희; Lee, Kang-Hee; et al, 한국과학기술원, 2004

1531
유도전동기의 소음/진동 특성 분석 및 고정자와 회전자 사이에서의 분포된 전자기적 가진 입력의 간접적 추정 = Noise/vibration analysis of induction motors and indirect identification of distributed electromagnetic excitation forces between stator and rotorlink

조대현; Cho, Dae-Hyeon; et al, 한국과학기술원, 1998

1532
유력 영역의 심플렉스화에 의한 효율적인 전체 최적화 알고리즘 개발 = Develpment of an efficient global optimization algorithm by simplex eliminationlink

오승환; Oh, Seung-Hwan; et al, 한국과학기술원, 2001

1533
유선곡률과 균일전단에 의한 난류생성의 상호작용에 관한 실험적 연구 = An experimental investigation of the interactive turbulence production between streamline curvature and uniform shearlink

임효재; Lim, Hyo-Jae; et al, 한국과학기술원, 1995

1534
유연 금속 패턴의 레이저 응용 제조에 관한 연구 = A study on laser applied fabrication of flexible metal patternlink

강봉철; Kang, Bong-Chul; et al, 한국과학기술원, 2011

1535
유연모재 위에 올려진 나노소재기반 투명 전도성 박막의 파손기구 및 전기-기계적 거동 = Failure mechanism and electro-mechanical behavior of nanomaterials based transparent conducting films on flexible substratelink

이정환; Lee, Jeong-Hwan; et al, 한국과학기술원, 2017

1536
유연한 팔을 갖는 여유자유도 로봇 매니퓰레이터의 진동 감소를 위한 입력 설계에 관한 연구 = Input design of a flexible redundant manipulator for end-point vibration reductionlink

김선재; Kim, Seon-Jae; et al, 한국과학기술원, 1998

1537
유인원 로봇 시스템의 보행과 자세에 관한 연구 = (A) study on walking and posture for anthropoid robot systemlink

윤병호; 김수현; et al, 한국과학기술원, 2018

1538
유전 경화 모니터링을 이용한 후판 복합재료의 스마트 성형 기법 = Smart cure process for thick composites using dielectric cure monitoringlink

김형근; Kim, Hyoung-Geun; et al, 한국과학기술원, 2003

1539
유전자 알고리즘을 이용한 전체/다목적 최적화 알고리즘의 개발 = Development of a global/multicriteria optimization algorithm based on the genetic algorithmlink

이준배; Lee, Jun-Bae; et al, 한국과학기술원, 1996

1540
유전체 탄성중합체를 이용한 에너지 하베스팅 패드에 대한 연구 = A study on energy harvesting pad using dielectric elastomerlink

강경수; Kang, Gyung-Soo; et al, 한국과학기술원, 2011

1541
유체기계 흡/배기 소음원의 시변 및 비선형 특성에 관한 연구 = A study on the time-varying and nonlinear source characteristics of intake and exhaust systems in fluid machineslink

장승호; Jang, Seung-Ho; et al, 한국과학기술원, 2002

1542
유한 요소법을 이용한 변동하중하의 균열닫힘 예측에 관한 연구 = Study on prediction of crack closure under variable loading by finite element methodlink

박순조; Park, Soon-Jo; 엄윤용; 송지호; et al, 한국과학기술원, 1997

1543
유한시간 사이클을 이용한 저온열 증기 동력기관의 이론적 최적화 = Finite-time optimizations of low-grade vapor power cycle heat engineslink

이원용; Lee, Won-Yong; et al, 한국과학기술원, 1991

1544
유한요소 격자 개선과정을 통한 진동저감 구조형상의 최적화 연구 = Structural shape optimization for minimum vibration using grid improval processeslink

강구태; Kang, Koo-Tae; et al, 한국과학기술원, 1997

1545
유한요소 극한해석을 이용한 소성구조물의 위상최적화 = Topology optimization of plastic structures using finite element limit analysislink

이종섭; Lee, Jong-Sup; et al, 한국과학기술원, 2010

1546
유한요소 민감도해석을 이용한 박판금속성형에서의 공정변수 최적설계 = Optimum process design in sheet metal forming processes using finite element sensitivity analysislink

김세호; Kim, Se-Ho; et al, 한국과학기술원, 2002

1547
유한요소 시간이산화를 이용한 직접 적분법과 구조동역학에의 응용 = A direct integration methods using finite element time discretization and its application to structural dynamicslink

이대일; Lee, Dae-Ill; et al, 한국과학기술원, 1993

1548
유한요소 역 해석을 이용한 박판금속 성형의 공정변수 예측 = Process parameter estimation in sheet metal forming using a finite element inverse methodlink

이충호; Lee, Choong-Ho; et al, 한국과학기술원, 1997

1549
유한요소법을 이용한 변형 다물체계의 마찰을 고려한 접촉-충돌 해석 = Analysis of frictional contact-impact in deformable multibody systems using finite element methodlink

고승환; Ko, Seung-Hwan; et al, 한국과학기술원, 1991

1550
유한요소법을 이용한 분자 시스템의 전자 밀도 계산에 관한 연구 = Finite element calculation of the electron densities of molecular systemslink

김민성; Kim, Min-Sung; 윤성기; 강정구; et al, 한국과학기술원, 2006

1551
유한폭 저어널베어링에서의 난류윤활해석 = The analysis of turbulent lubrication of finite journal bearinglink

이득우; Lee, Deug-Woo; et al, 한국과학기술원, 1990

1552
유한한 적층판의 차음성능 예측에 관한 연구 = A Study on the sound transmission through the finite multi-layered panellink

이종화; Lee, Jong-Hwa; et al, 한국과학기술원, 2003

1553
윤활유 내의 기포가 저널 베어링 성능에 미치는 영향 = The effect of bubbles in lubricant on the performance of journal bearingslink

최송; Choi, Song; et al, 한국과학기술원, 2004

1554
은 나노와이어 박막 기반 투명전극의 성능 향상 및 레이저 패터닝에 관한 연구 = (A) study on performance improvement and laser patterning of transparent electrodes based on silver nanowire thin filmslink

김건우; 양민양; et al, 한국과학기술원, 2019

1555
음속 노즐 뱅크의 유출 계수에 관한 실험적 연구 = An experimental study on the discharge coefficients of sonic nozzle banklink

최용문; Choi, Yong-Moon; et al, 한국과학기술원, 1999

1556
음장에서의 예혼합화염의 거동에 관한 실험적인 연구 = An experimental investigation on premixed flame front behavior under acoustic fieldslink

김진국; Kim, Jin-Kook; et al, 한국과학기술원, 1996

1557
음장을 표현하는 고유함수의 수보다 적은 수의 제어음원과 센서를 이용한 능동소음 제어시스템의 제어성능에 관한 연구 = A study on the control performance of the active noise control system with insufficient number of control sources and sensorslink

윤두병; Yoon, Doo-Byung; et al, 한국과학기술원, 1998

1558
음파의 산란을 이용한 고체내의 원통형 공동의 탐색 = Detection of a cylindrical cavity in solid based on acoustic wave scatteringlink

김유만; Kim, You-Man; et al, 한국과학기술원, 1993

1559
음향 메타물질을 이용한 덕트 소음의 효율적인 저감 = Efficient attenuation of duct-borne noise by using the acoustic metamaterialslink

김다영; 이정권; et al, 한국과학기술원, 2019

1560
음향 측정을 이용한 관 단면의 이차원 온도 분포 역추산 = Inverse estimation of the two-dimensional in-duct temperature distribution using the acoustic measurementlink

김태균; Kim, Tae-Kyoon; et al, 한국과학기술원, 2015

rss_1.0 rss_2.0 atom_1.0