Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 1501 to 1560 of 1884

1501
역 투시 변환을 이용한 스테레오 비젼 알고리즘에 관한 연구 = A Study on the stereo vision algorithm using inverse perspective transformationlink

조용철; Cho, Yong-Chul; et al, 한국과학기술원, 1992

1502
역학일 분석을 통한 보행 메커니즘 고찰 = Study of human walking mechanism based on mechanical work analysis : young, elderly, and OA patientslink

박희원; Park, Hee Won; et al, 한국과학기술원, 2015

1503
연료 분사 전략이 대형 디젤 엔진 연소 성능에 미치는 영향 = The effect of fuel injection strategies on combustion characteristics in a heavy-duty diesel enginelink

이진우; Lee, Jin-Woo; et al, 한국과학기술원, 2011

1504
연료공급조건에 따른 고압디젤연료 분무특성 = Spray characteristics of high pressure diesel injection with regard to fuel injection equipmentslink

강진석; Kang, Jin-Suk; et al, 한국과학기술원, 2003

1505
연료분무 및 유동장에 따른 직접분사식 가솔린 엔진 특성에 관한 연구 = The interaction between fuel spray and flow in direct-injection spark ignition enginelink

최재준; Choi, Jae-Joon; et al, 한국과학기술원, 2005

1506
연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink

김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983

1507
연소불안정과 교란에너지에 관한 연구 = A study on Combustion Instability and Disturbance Energylink

김현준; Kim, Hyeon Jun; et al, 한국과학기술원, 2010

1508
연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink

안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006

1509
열 하중을 받고 있는 다층구조물에 대한 열 기계적 해석과 파괴역학의 적용 = Thermomechanical and fracture mechanical analysis of multilayered structure subjected to thermal loadinglink

임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 2001

1510
열-기계적 접촉 문제의 상보성 수식화 = Formulation of thermo-mechanical contact based on complementarity relationslink

박준; Park, Jun; et al, 한국과학기술원, 1994

1511
열-점소성 유한요소법을 이용한 대형단조에서의 기공압착해석에 관한 연구 = Analysis of void crushing in the large forging using the thermo-viscoplastic finite element methodlink

박치용; Park, Chi-Yong; et al, 한국과학기술원, 1996

1512
열간 압출 공정의 평금형 설계를 위한 규칙 기반 설계 시스템 개발 = Deveopment of rule-based design system for flat die design of hot extrusion processlink

이근안; Lee, Geun-An; et al, 한국과학기술원, 2001

1513
열간압연공정의 루퍼제어시스템 개선을 위한 장력과 롤 속도 제어 퍼지 알고리즘 = Fuzzy algorithm for improvement of looper control system in hot rolling based on tension and roll speed controllink

정종엽; Jung, Jong-Yeob; et al, 한국과학기술원, 1998

1514
열성층배관 Thermal striping 영역에 존재하는 균열의 거동에 관한 연구 = A study on the behavior of a crack located at thermal striping zone in thermally stratified pipelink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1993

1515
열음향 진동에 관한 연구 = A study on the thermoaxoustic oscillationlink

권영필; Kwon, Young-Pil; et al, 한국과학기술원, 1986

1516
열적 기계적 하중이 작용하는 구조물의 비탄성 해석과 수명 예측 = Inelastic analysis and life prediction for structures subject to thermomechanical loadinglink

윤삼손; Yoon, Sam-Son; et al, 한국과학기술원, 2003

1517
열전달을 고려한 스크롤 압축기내의 열역학적 냉매압축과정에 대한 연구 = Study on the thermodynamic compression process of refrigerant in the scroll compressor with heat transfer effectlink

장기태; Jang, Ki-Tae; et al, 한국과학기술원, 2006

1518
열하중 조건하의 임의 곡선 균열에 대한 보존 적분에 관한 연구 = A study on a conservation integral for arbitrarily curved cracks under thermal loadinglink

정해동; Chung, Hae-Dong; et al, 한국과학기술원, 1997

1519
열화 특성이 향상된 탄소나노튜브 포화흡수체 기반의 모드동기 광섬유 레이저 및 기초 응용에 관한 연구 = Thermal degradation-resistant CNT saturable absorber for mode-locked fiber laser and basic applicationlink

강대원, 한국과학기술원, 2022

1520
영구자석 매입형 BLDC 모터의 소음/진동 평가를 위한 전자기적 가진력의 특성화 = Characterization of electromagnetic excitation forces for interior permanent magnet type BLDC motors for noise/vibration assessmentlink

고홍석; Ko, Hong-Seok; et al, 한국과학기술원, 2003

1521
영구자석동기모터의 외란 관측 기반 강인한 토크 제어 및 새로운 약자속 제어법 = Disturbance observer based robust torque control and novel flux-weakening control of permanent magnet synchronous motorlink

김용훈; 김경수; et al, 한국과학기술원, 2018

1522
영상을 이용한 형상 측정 시스템의 측정 불확도에 관한 연구 = Uncertainty evaluation of the digital imaging system for dimensional metrologylink

이상윤; Lee, Sang-Yoon; et al, 한국과학기술원, 1998

1523
영역 분할과 특징 곡선 추출을 통한 유한 요소망으로부터 CAD 곡면 모델의 생성 = Construction of CAD surface models from finite element meshes using region clustering and feature curve extractionlink

박정민; Park, Jung-Min; et al, 한국과학기술원, 2010

1524
예혼합화염의 화염 내재적인 켈빈-헬름홀츠 불안정성에 관한 연구 = A study on the flame-intrinsic kelvin-helmholtz instability of premixed flameslink

곽영태; Guahk, Young-Tae; et al, 한국과학기술원, 2009

1525
온도 역계산을 위한 $CO_2$ 4.3μm 밴드의 복사 모델링 연구 = Radiation modeling of $CO_2$ 4.3μm band for temperature inversionlink

양수석; Yang, Soo-Seok; et al, 한국과학기술원, 1999

1526
온도구배가 있는 수평유체층 내의 전기유체역학적 대류 = Electrohydrodynamic convection in a horizontal fluid layer with temperature gradientlink

고형종; Ko, Hyung-Jong; et al, 한국과학기술원, 1988

1527
와류노즐로부터 분사되는 액막의 미립화에 관한 연구 : 주위 기체의 응축에 따른 효과 = Atomization of liquid sheet discharged from swirl nozzle-effect of ambient vapor condensationlink

고광웅; Koh, Kwang-Uoong; et al, 한국과학기술원, 2003

1528
외란 추정기를 이용한 비 구형 기어 브레이크 시스템의 제동 토크 적응 제어 = Adaptive braking torque control of electronic non-circular gear brake system using disturbance observerlink

박희람; Park, Heeram; et al, 한국과학기술원, 2017

1529
외부 가압 공기 베어링의 능동 제어에 관한 연구 = A study on active control of externally pressurized air bearingslink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1998

1530
외부 트리거링 신호를 이용한 비전 기반의 하이퍼-나이키스트 주파수 대역 모드해석 기법 = Vision-based modal analysis for hyper-Nyquist frequency range using external triggering signallink

김동현; 박영진; et al, 한국과학기술원, 2023

1531
외부가압 공기저어널베어링의 안정성 및 회전정밀도에 관한 연구 = A study on the stability and rotational accuracy of externally pressurized air journal bearinglink

김금모; Kim, Keum-Mo; et al, 한국과학기술원, 1992

1532
외연적 유한요소법을 이용한 차체 구조물의 충돌해석 = Crash analysis of auto-body structures with an explicit finite element methodlink

강우종; Kang, Woo-Jong; et al, 한국과학기술원, 2000

1533
용액 공정에 의한 고효율 고분자 발광 다이오드에 관한 연구 = A study on high-efficiency polymer light-emitting diodes fabricated by solution processeslink

윤홍석; Youn, Hong-Seok; et al, 한국과학기술원, 2011

1534
용액공정을 이용한 유기발광 다이오드용 WO3/Ag/WO3 다층투명전극에 관한 연구 = A study on solution-processed WO3/Ag/WO3 multilayer transparent electrode for organic light-emitting diodeslink

전강민; Jeon, Kang-Min; et al, 한국과학기술원, 2012

1535
용융탄산염 연료전지 스택의 균일화를 위한 3차원 유동 해석 = Three-dimensional fluid flow analysis for flow uniformity of molten carbonate fuel cell stacklink

김형섭; Kim, Hyung-Sop; et al, 한국과학기술원, 2014

1536
운전자 주시거리와 인체응답 연구에 기반한 인간의 조향 특성에 가까운 운전자 모델 개발 = Development of driver model close to human driving characteristics based on driverlink

노기한; Noh, Ki-Han; et al, 한국과학기술원, 2013

1537
원격로봇수술을 위한 작업공간전환기능을 갖춘 수술 작동기의 설계 및 평가 = Design and evaluation of a surgical manipulator with workspace-conversion ability for telerobotic surgerylink

김기영; Kim, Ki-Young; et al, 한국과학기술원, 2012

1538
원심 임펠러의 내부 유동장에 근거한 이론적인 미끄럼 계수와 최적 디퓨저 설계 절차의 개발 = An analytical slip factor based on an internal flow field for centrifugal impellers and development of optimum design procedure for diffuserlink

팽기석; Paeng, Kee-Seok; et al, 한국과학기술원, 2001

1539
원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink

오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006

1540
원자 모사를 이용한 나노 와이어 안정성에 관한 연구 = Study on the stability of nanowires using atomistic simulationslink

임영태; Im, Young-Tae; et al, 한국과학기술원, 2009

1541
원전의 압력경계 구조물에서 위그너-빌 분포를 이용한 충격 발생위치 추정 = An impact source localization using wigner-ville distribution on nuclear power plant pressure boundary structureslink

박진호; Park, Jin-Ho; et al, 한국과학기술원, 2006

1542
원통연삭작업의 시뮬레이션에 관한 연구 = A study on simulation of cylindrical grindinglink

이응숙; Lee, Eung-Sook; 양민양; 이재경; et al, 한국과학기술원, 1997

1543
원통형 적층 쉘에 의한 음파의 공명 산란 = Acoustic resonance scattering from multilayered cylindrical shellslink

주영상; Joo, Young-Sang; et al, 한국과학기술원, 1998

1544
원형 개재물과 무한기지내 균열 간의 상호작용에 관한 연구 = Interaction between a circular inclusion and an arbitrarily oriented crack under mechanical and thermal loadinglink

정대율; Chung, Dae-Youl; et al, 한국과학기술원, 2001

1545
원형 진동판을 기반으로 제작된 압전 마이크로폰 = Piezoelectric microphone built on circular diaphragmlink

이운섭; Lee, Woon-Seob; et al, 한국과학기술원, 2008

1546
원호계면균열을 갖는 섬유강화 복합재료의 L 적분을 이용한 횡방향 유효탄성계수 연구 = Estimation of effective transverse elastic moduli by L integral in fiber reinfroced composite having circular-arc shaped interfacial crackslink

김상열; Kim, Sang-Yeol; et al, 한국과학기술원, 1994

1547
웨이퍼 접합 시험에서의 파괴역학적 응용 연구 = An application of fracture mechanics to wafer bonding testlink

문호정; Moon, Ho-Jeong; et al, 한국과학기술원, 1998

1548
웹 서비스 환경에서 데이터 중심 인터페이스를 이용한 CAD 모델 정보의 획득 = Retrieval of CAD model data using data-centric interface in web services environmentslink

김병철; Kim, Byung-chul; et al, 한국과학기술원, 2008

1549
위상 잠금된 안정화 펨토초 레이저의 반복율 변화에 의한 광대역 퓨리에 분광 LIDAR = Phase-locked fr-sweeping Fourier transform spectroscopy for broadband femtosecond LIDARlink

이근우; Lee, Keun Woo; et al, 한국과학기술원, 2015

1550
위상천이 모아레토포그라피를 이용한 3차원물체의 미세형상측정 = Phase-shifting moire topography for precision measurement of 3-dimensional profileslink

최이배; Choi, Yi-Bae; et al, 한국과학기술원, 1998

1551
위상천이 회절격자 간섭계 = Phase shifting diffraction grating interferometerlink

황태준; Hwang, Tae-Joon; et al, 한국과학기술원, 2003

1552
위상평면을 이용한 퍼지제어기 설계 및 유압 서보 시스템에의 적용 = Fuzzy controller design using phase plane with its application to electro-hydraulic servo systemlink

이상열; Lee, Sang-Yeal; et al, 한국과학기술원, 1999

1553
위성체 내 파이로충격 원천 차단을 위한 절연기 개발 = Development of an isolator for source isolation for pyroshock in satellitelink

정주원; Jeong, Juwon; et al, 한국과학기술원, 2017

1554
위치 예측 시뮬레이터를 이용한 인터넷 로봇 시스템의 거리 오차 보상 = Distance error compensation of internet-based robot system using position prediction simulatorlink

이강희; Lee, Kang-Hee; et al, 한국과학기술원, 2004

1555
유도전동기의 소음/진동 특성 분석 및 고정자와 회전자 사이에서의 분포된 전자기적 가진 입력의 간접적 추정 = Noise/vibration analysis of induction motors and indirect identification of distributed electromagnetic excitation forces between stator and rotorlink

조대현; Cho, Dae-Hyeon; et al, 한국과학기술원, 1998

1556
유력 영역의 심플렉스화에 의한 효율적인 전체 최적화 알고리즘 개발 = Develpment of an efficient global optimization algorithm by simplex eliminationlink

오승환; Oh, Seung-Hwan; et al, 한국과학기술원, 2001

1557
유선곡률과 균일전단에 의한 난류생성의 상호작용에 관한 실험적 연구 = An experimental investigation of the interactive turbulence production between streamline curvature and uniform shearlink

임효재; Lim, Hyo-Jae; et al, 한국과학기술원, 1995

1558
유연 금속 패턴의 레이저 응용 제조에 관한 연구 = A study on laser applied fabrication of flexible metal patternlink

강봉철; Kang, Bong-Chul; et al, 한국과학기술원, 2011

1559
유연모재 위에 올려진 나노소재기반 투명 전도성 박막의 파손기구 및 전기-기계적 거동 = Failure mechanism and electro-mechanical behavior of nanomaterials based transparent conducting films on flexible substratelink

이정환; Lee, Jeong-Hwan; et al, 한국과학기술원, 2017

1560
유연한 팔을 갖는 여유자유도 로봇 매니퓰레이터의 진동 감소를 위한 입력 설계에 관한 연구 = Input design of a flexible redundant manipulator for end-point vibration reductionlink

김선재; Kim, Seon-Jae; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0