1801 | 동일 격자망 일차요소 해석결과를 이용한 이차요소 격자의 축차해석 = Iterative analysis of a mesh of quadratic finite elements using the results of the same mesh of linear elementslink 김준영; Kim, Joon-Young; et al, 한국과학기술원, 2014 |
1802 | 동일 방향 혼합위치/힘 제어를 통한 마찰력이 있는 경우의 Peg - in - Hole작업 = Peg in hole operation in variable friction environment using hybrid position/force control in the same directionlink 김상연; Kim, Sang-Youn; et al, 한국과학기술원, 1997 |
1803 | 동작 소음이 발생하는 휴머노이드 로봇을 위한 음원 위치 추정 = Sound source localization for the humanoid robot with operating noiselink 황인준; 박영진; et al, 한국과학기술원, 2019 |
1804 | 동작 정보를 이용한 햅틱 피드백 생성 = Gesture bassed haptic feedback generationlink 한병길; Han, Byung-Kil; et al, 한국과학기술원, 2010 |
1805 | 동적 걸음새를 적용한 사각 보행로보트의 운동 가능성 평가에 관한 연구 = The motion feasibility study of dynamic gait of a quadruped walking robotlink 김종년; Kim, Jong-Nyeun; et al, 한국과학기술원, 1990 |
1806 | 동적 극한해석을 위한 적응적 시간간격기법 = Adaptive time-stepping procedure for dynamic limit analysislink 이종섭; Lee, Jong-Sup; et al, 한국과학기술원, 2003 |
1807 | 동적 댐퍼를 이용한 모우터-외팔보계의 잔류 진동 감쇠에 관한 연구 = A study on suppression of residual vibrations in motor-driven arm systems by dynamic damperlink 조대현; Cho, Dae-Hyun; et al, 한국과학기술원, 1989 |
1808 | 동적 마찰 모델을 이용한 마찰계의 제어에 관한 연구 = A study on the friction compensation with a dynamic friction modellink 임상빈; Yim, Sang-Bin; 오준호; 김수현; et al, 한국과학기술원, 1997 |
1809 | 동적 모델의 FEM 신뢰도 제고에 관한 연구 = A study on improving the accuracy of finite element modelinglink 양경택; Yang, Kyung-Taek; et al, 한국과학기술원, 1985 |
1810 | 동적 예비변형률 효과를 고려한 중변형률속도에서의 차체 강판 물성 특성 연구 = Characterization on the material properties of auto-body steel sheets at intermediate strain rates considering the dynamic pre-strain effectlink 김민기; Kim, Min-Ki; et al, 한국과학기술원, 2014 |
1811 | 동적 하중을 받는 반무한체에서 Mode I 균열진전의 유한요소 해석 = Finite element analysis of Mode I crack-growth in a semi-infinite body under dynamic loadinglink 오성은; Oh, Seong-Eun; et al, 한국과학기술원, 2012 |
1812 | 동적 효과를 고려한 크레인 전도 안정성의 유한요소 해석 = Finite element analysis for overturning stability of telescopic crane including dynamic effectslink 이용우; Lee, Yong-Woo; 엄윤용; 임세영; et al, 한국과학기술원, 1996 |
1813 | 동적모델 해석에 의한 밸브기구 성능 개선에 관한 연구 = A study on improving valve train performance by a dynamic model analysislink 전혁수; Jeon, Hyuck-Soo; et al, 한국과학기술원, 1986 |
1814 | 동적문제의 유한요소해석을 위한 시간영역의 계층적 적응 알고리즘 연구 = A new hierarchical adaptive refinement scheme in time for the finite element structural dynamicslink 조진우; Cho, Jin-Woo; et al, 한국과학기술원, 1994 |
1815 | 동적으로 결합된 모달 기저를 이용한 유체-구조 연성 시스템의 모델 축소 기법 = Model reduction of fluid-structure coupled system using dynamically coupled modal basislink 김현준; 박용화; et al, 한국과학기술원, 2021 |
1816 | 동종 탄소강의 마찰용접에 관한 연구 = A study on the friction welding of similar carbon steelslink 김성도; Kim, Sung-Do; et al, 한국과학기술원, 1985 |
1817 | 동축 코안다 제트의 초기 영역에 대한 실험적 연구 = An experimental investigation of initial region of the coaxial coanda jetlink 박호동; Park, Ho-Dong; et al, 한국과학기술원, 1984 |
1818 | 동축분류의 난류확산에 관한 연구-선형전단류 = An experiment study on turbulent diffusion of coaxial flow-uniform shear flowlink 김진국; Kim, Jin-Kook; et al, 한국과학기술원, 1990 |
1819 | 동층류 축대칭 확산화염내의 화염구조및 매연입자 농도분포의 예측 = Predictions on the flame structure and soot distribution in the coflowing laminar diffusion flameslink 이정기; Lee, Jung-Ki; et al, 한국과학기술원, 1992 |
1820 | 동특성 변경을 위한 구조물의 결합 위치 선정 = Selection of connection position to change dynamic characteristic of structurelink 김경원; Kim, Kyung-Won; 박윤식; 박영진; et al, 한국과학기술원, 2003 |
1821 | 동특성 측정에 의한 유한요소모델의 신뢰도 제고 및 파손부위 색출에 관한 연구 = A study on improving the reliability of a finite element model and detecting failture by dynamic characteristic measurementslink 박형순; Park, Hyung-Soon; et al, 한국과학기술원, 1986 |
1822 | 동특성 측정에 의한 평판구조물에서의 결함탐지에 관한 연구 = A study on failure detection in plate structure by dynamic characteristic measurementslink 이상설; Lee, Sang-Seol; et al, 한국과학기술원, 1987 |
1823 | 동특성 해석에 의한 전동식 가진기의 설계 제작 = Design and manufacture of an electrodynamic exciter based on dynamic analysislink 박태익; Park, Tae-Ig; et al, 한국과학기술원, 1990 |
1824 | 두 개의 동심 원형 개재물을 가지는 삼종 재료에서의 특이성 = A singularity in a trimaterial with two concentric circular inclusionslink 이택균; Lee, Taek-Gyun; et al, 한국과학기술원, 2000 |
1825 | 두 개의 평행 원판의 면방향 운동에 의한 축대칭의 느린 점성유동 = Axisymmetric slow viscous flow due to the broad-side motion of two parallel diskslink 정완균; Chung, Wan-Gyun; et al, 한국과학기술원, 1983 |
1826 | 두 귀에 서로 다른 음이 입사되는 상태에서의 라우드니스 모델에 관한 연구 = A study on the loudness model in dichotic conditionslink 차정호; Cha, Jeong-Ho; et al, 한국과학기술원, 2003 |
1827 | 두 무한 평행벽면 가운데 위치한 평판의 가상질량 = Added mass of a plate at the center of a fluid channellink 조영생; Cho, Young-Saeng; 김문언; 이해; et al, 한국과학기술원, 1979 |
1828 | 두 발 도립진자의 평형상태 판별 및 한발지지 자세 안정화에 관한 연구 = A study on the distinction of equilibrium state and stabilization of single supported posture for inverted pendulum consisting of 2 legslink 조백규; Cho, Baek-Kyu; et al, 한국과학기술원, 2004 |
1829 | 두 유체가 층을 이루고 있는 정사각형 밀폐용기내의 자연대류 열전달 = Natural convection heat transfer in a square cavity with two-fluid layerslink 백진욱; Paek, Jin-Wook; et al, 한국과학기술원, 1994 |
1830 | 두개의 밸런싱헤드를 이용한 운전중 자동 강성 밸런싱 = Automatic rigid balancing of a rotor during operation with two balancing headslink 최우석; Choi, Woo-Suk; 이종원; 박윤식; et al, 한국과학기술원, 1986 |
1831 | 둔부 인공관절의 금속줄기부에 대한 최적설계모델연구 = A study of the optimal design model for the metal stem in total hip replacementlink 이재원; Lee, Jae-Won; et al, 한국과학기술원, 1979 |
1832 | 듀얼 클러치 변속기의 변속 레퍼런스 실시간 최적화에 관한 연구 = Real time optimization of gear shift reference for dual clutch transmissionlink 이태헌; 최세범; et al, 한국과학기술원, 2018 |
1833 | 듀얼 클러치 변속기의 변속 성능 향상을 위한 슬라이딩 모드 제어기 개발에 대한 연구 = A design of sliding mode controller for shift performance improvement of dual clutch transmissionlink 조이형; Cho, Lee-Hyoung; et al, 한국과학기술원, 2008 |
1834 | 드로우비드 성형과 드로잉 공정의 탄소성 유한요소 해석 및 박판 성형공정에서의 등가 경계조건 = Elastic-plastic finite element analysis of drawbead forming and drawing processes for equivalent boundary conditions in sheet metal forminglink 박종세; Park, Jong-Se; et al, 한국과학기술원, 2002 |
1835 | 드릴 동력계의 개발과 성능특성에 관한 연구 = A study on the development of a drill dynamometer and its performance characteristicslink 김현수; Kim, Hyun-Soo; et al, 한국과학기술원, 1980 |
1836 | 들로네 셀 분할 알고리즘과 전기 회로 유사성을 이용한 횡 방향 투수 계수 예측 모델 = Delaunay triangulation-based transverse permeability prediction model with electric circuit analogylink 조현성; 김성수; et al, 한국과학기술원, 2023 |
1837 | 등가 선형화 방법을 이용한 비선형 요소 위치 및 그 형태 탐지에 관한 연구 = Nonlinear element position and its type identification method utilizing equivalent linearization techniquelink 변언섭; Byun, Uhn-Sub; et al, 한국과학기술원, 1990 |
1838 | 등가정하중을 이용한 점탄성 충격 절연체의 위상최적설계 = Topology optimization of viscoelastic shock isolators using equivalent static loadslink 박종화; Park, Jong Hwa; et al, 한국과학기술원, 2015 |
1839 | 등각사상을 이용한 비정상 운동중인 이차원 익형의 비점성 해석 = Inviscid analysis of two-dimensional airfoils in unsteady motion using conformal mappinglink 오창석; Oh, Chang-Seok; et al, 한국과학기술원, 1991 |
1840 | 등속운동 훈련장치의 개발 및 이의 성능 시험에 관한 연구 = Development of isokinetic exercise system and examination of its performancelink 조영돈; Cho, Young-Don; et al, 한국과학기술원, 1987 |
1841 | 디스크 버너의 메소스케일 간격 변화에 따른 메탄과 프로판 예혼합 화염 전파 양상 = Propagation of methane and propane premixed flames with various mesoscale gaps of a disk burnerlink 장혜진; 김남일; et al, 한국과학기술원, 2018 |
1842 | 디이젤 엔진 구동 동기발전기의 자동전압조정기에 관한 연구 = A study on automatic voltage regulator for the diesel engine driven synchronous generatorlink 안종보; Ahn, Jong-Bo; et al, 한국과학기술원, 1995 |
1843 | 디젤 매연여과기 내의 음향전파 해석에 관한 연구 = A study on the analysis of acoustic propagation in diesel particulate filterslink 최원용; Choi, Won-Yong; et al, 한국과학기술원, 2005 |
1844 | 디젤 부분산화 촉매의 열적 안정성 = Thermal stability of diesel partial oxidation catalystslink 이상호; Lee, Sang-Ho; et al, 한국과학기술원, 2011 |
1845 | 디젤 분사기 분공 특성에 따른 배기 특성과 원인 규명 = Identification of exhaust characteristics with diesel injector nozzle parameterslink 홍동우; 배충식; et al, 한국과학기술원, 2020 |
1846 | 디젤 예혼합 압축착화엔진에서 모사 배기가스재순환과 과급에 따른 연소특성 = Effect of simulated EGR and supercharging on the combustion in a diesel HCCI enginelink 박세익; Park, Se-Ik; 배충식; 신현동; et al, 한국과학기술원, 2006 |
1847 | 디젤 자열개질 중 발생하는 에틸렌에 의한 탄소침적 억제에 관한 연구 = Study on suppression of ethylene-induced carbon deposition in diesel autothermal reforminglink 윤상호; Yoon, Sang-ho; et al, 한국과학기술원, 2008 |
1848 | 디젤/천연가스 이종연료 압축착화엔진에서 피스톤 형상에 따른 연소 특성 = Influence of piston bowl geometry on combustion of a diesel/CNG dual-fuel compression ignition enginelink 김현수; 배충식; et al, 한국과학기술원, 2021 |
1849 | 디젤엔진에서 연료분사기구의 시믈레이션 = Simulation of fuel injection system in a diesel enginelink 김영석; Kim, Young-Suck; 이정오; 박희용; et al, 한국과학기술원, 1979 |
1850 | 디지탈 PID 제어기를 이용한 갈바노미터의제어에 관한 연구 = A study on the galvanometer control by digital PID controllerlink 오재견; Oh, Jae-Kyoun; et al, 한국과학기술원, 1994 |
1851 | 디지털 동영상을 이용한 진동 측정 및 운전 중 변형 형상 분석 = Development of vibration measurement method and analysis of ODS from digital videolink 신민철; Shin, Min-Chul; et al, 한국과학기술원, 2007 |
1852 | 디지털 영상 합성법을 사용한 X선 단층 영상 시스템의 해석 및 설계 = The analysis and design of X-ray cross-sectional imaging system using digital tomosynthesislink 노영준; Roh, Young-Jun; 양동열; 조형석; et al, 한국과학기술원, 1997 |
1853 | 딥러닝 기반 선택적 가스 감지가 가능한 고 균일성의 반도체식 가스 센서 어레이 구현 = Semiconductor gas sensor array with high batch uniformity for deep learning-based selective gas detectionlink 강민구; 박인규; et al, 한국과학기술원, 2021 |
1854 | 라우드니스에 근거한 능동 소음 제어 기법 = Active noise control based on Loudnesslink 배석형; Bae, Seok-Hyung; et al, 한국과학기술원, 1996 |
1855 | 랜덤 제조 오차를 고려한 모드 편재계수를 최소화하는 반복 배열 마이크로 공진기의 최적 설계 = Design of MEMS resonator array for minimization of mode localization factor subject to random fabrication errorlink 김욱태; Kim, Wook-Tae; et al, 한국과학기술원, 2005 |
1856 | 랜덤 하중을 받는 저감쇠 구조물의 최적 설계 = Optimal design of lightly damped structures under random excitationslink 최택상; Choi, Taek-Sang; 곽병만; 이종원; et al, 한국과학기술원, 1982 |
1857 | 랜덤진동상황에서의 표면실장부품 소더범프에 대한 피로수명평가 = Fatigue life assessment of bump type solder joint under random vibration environmentlink 김태헌; Kim, Tae-Heon; 이순복; 엄윤용; et al, 한국과학기술원, 1998 |
1858 | 랜덤하중하에서 피로균열 진전에 미치는 인장잔류응력의 영향 = The effects of tensile residual stresses on fatigue crack growth under random loadinglink 김주성; Kim, Joo-Sung; et al, 한국과학기술원, 1988 |
1859 | 랜덤하중하의 Al 7475-T7351의 피로수명에 관한 연구 = Fatigue life of 7475-T7351 aluminum alloy under random loadinglink 김현호; Kim, Hyun-Ho; et al, 한국과학기술원, 2009 |
1860 | 랜덤하중하의 피로균열닫힘과 진전거동 : 파형종류와 파형길이의 영향 = Fatigue crack closure and growth behavior under random loading : the effect of band-width characteristics and history length of random loadinglink 권영규; Kwon, Young-Gyu; et al, 한국과학기술원, 1994 |