1981 | 액체 추진제 로켓엔진의 혼합비 안정기 설계와 특성 연구 = Study on design and characteristics of mixture ratio stabilizer for liquid propellant rocket enginelink 정태규; Jung, Tae-Kyu; et al, 한국과학기술원, 2009 |
1982 | 액체로켓 추진기관에서의 액체산소 과냉각에 대한 연구 = Study on the subcooling of liquid oxygenlink 조남경; Cho, Nam-Kyung; et al, 한국과학기술원, 2007 |
1983 | 액체연료 이중 스월 분무화염의 연소 불안정 실험적 연구 = Experimental investigation of combustion instabilities of liquid-fueled dual-swirl spray flameslink 김명호; 김규태; et al, 한국과학기술원, 2022 |
1984 | 액화석유가스 직접분사 전기점화엔진에서 희박조건 연소 및 배기 = Combustion and emission characteristics of liquefied petroleum gas under lean conditionlink 정진영; Jung, Jin young; et al, 한국과학기술원, 2017 |
1985 | 양자점-탄소나노튜브 나노 하이브리드 구조체를 이용한 광전 소자의 제작 및 특성 평가에 관한 연구 = A study on fabrication and characterization of optoelectronic device using nanocrystal quantum dot-carbon nanotube hybrid structureslink 심형철; Shim, Hyung-Cheoul; et al, 한국과학기술원, 2010 |
1986 | 양코로나 방전을 수반하는 사각 관성충돌기에서의 정전 유동장과 입자부착 = Electrohydrodynamic flow and particle deposition in the rectangular impactor with positive corona dischargelink 정상현; Jeong, Sang-Hyeon; et al, 한국과학기술원, 1998 |
1987 | 에너지법에 의한 박판 성형공정의 해석에 관한 연구 = Study on the analysis of sheet metal forming processes by the energy methodlink 이항수; Lee, Hang-Soo; et al, 한국과학기술원, 1991 |
1988 | 에지와 코너 검지를 위한 새로운 영상 처리 알고리즘 개발과 용접 자동화로의 적용 = Development of new low level processing algorithm for edge and corner detection and application to welding automationlink 배순철; Bae, Sun-Cheol; et al, 한국과학기술원, 2003 |
1989 | 에탄올-메틸셀룰로오스 젤의 자발화 및 연소 특성에 관한 실험적 연구 = Experimental study of autoignition and combustion characteristics of an ethanol-methylcellulose gel dropletlink 이동기; 백승욱; et al, 한국과학기술원, 2019 |
1990 | 엔진유 및 자동변속기유 설계에 미치는 윤활 기유의 영향 = Effects of base oil characteristics in engine oils and automatic transmission fluids designlink 권완섭; Kwon, Wan-Seop; et al, 한국과학기술원, 2006 |
1991 | 여러층의 층간분리가 있는 복합재 적층판의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of composite laminated panels with multiple delaminationslink 경우민; Kyoung, Woo-Min; et al, 한국과학기술원, 1998 |
1992 | 여유 구동 기구에 의한 능동 강성과 충격 외란 제어 = Control of active stiffness and impact sisturbance by redundantly actuated mechanismlink 이상헌; Lee, Sang-Heon; et al, 한국과학기술원, 2001 |
1993 | 여유자유도 매니퓰레이터의 가속 성능에 관한 연구 = A study on acceleration performance of redundant manipulatorlink 심익찬; Shim, Ick-Chan; et al, 한국과학기술원, 1998 |
1994 | 역 투시 변환을 이용한 스테레오 비젼 알고리즘에 관한 연구 = A Study on the stereo vision algorithm using inverse perspective transformationlink 조용철; Cho, Yong-Chul; et al, 한국과학기술원, 1992 |
1995 | 역학일 분석을 통한 보행 메커니즘 고찰 = Study of human walking mechanism based on mechanical work analysis : young, elderly, and OA patientslink 박희원; Park, Hee Won; et al, 한국과학기술원, 2015 |
1996 | 연료 분사 전략이 대형 디젤 엔진 연소 성능에 미치는 영향 = The effect of fuel injection strategies on combustion characteristics in a heavy-duty diesel enginelink 이진우; Lee, Jin-Woo; et al, 한국과학기술원, 2011 |
1997 | 연료공급조건에 따른 고압디젤연료 분무특성 = Spray characteristics of high pressure diesel injection with regard to fuel injection equipmentslink 강진석; Kang, Jin-Suk; et al, 한국과학기술원, 2003 |
1998 | 연료분무 및 유동장에 따른 직접분사식 가솔린 엔진 특성에 관한 연구 = The interaction between fuel spray and flow in direct-injection spark ignition enginelink 최재준; Choi, Jae-Joon; et al, 한국과학기술원, 2005 |
1999 | 연료전지 배터리 태양전지를 이용한 무인기용 복합 전기추진 시스템 개발 = Development of a hybrid electrical propulsion system for unmanned aerial vehicles combining the fuel cell with a battery and solar cellslink 강병규; Gang, Byeong Gyu; et al, 한국과학기술원, 2016 |
2000 | 연삭공정에 있어서 자려진동 해석 및 임펙트 뎀퍼의 효과에 관한 연구 = A study of self-excited vibratition and impact damper in grinding processlink 김옥현; Kim, Ock-Hyun; et al, 한국과학기술원, 1983 |
2001 | 연소불안정과 교란에너지에 관한 연구 = A study on Combustion Instability and Disturbance Energylink 김현준; Kim, Hyeon Jun; et al, 한국과학기술원, 2010 |
2002 | 연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006 |
2003 | 열 하중을 받고 있는 다층구조물에 대한 열 기계적 해석과 파괴역학의 적용 = Thermomechanical and fracture mechanical analysis of multilayered structure subjected to thermal loadinglink 임지혁; Lim, Ji-Hyuk; et al, 한국과학기술원, 2001 |
2004 | 열-기계적 접촉 문제의 상보성 수식화 = Formulation of thermo-mechanical contact based on complementarity relationslink 박준; Park, Jun; et al, 한국과학기술원, 1994 |
2005 | 열-점소성 유한요소법을 이용한 대형단조에서의 기공압착해석에 관한 연구 = Analysis of void crushing in the large forging using the thermo-viscoplastic finite element methodlink 박치용; Park, Chi-Yong; et al, 한국과학기술원, 1996 |
2006 | 열간 압출 공정의 평금형 설계를 위한 규칙 기반 설계 시스템 개발 = Deveopment of rule-based design system for flat die design of hot extrusion processlink 이근안; Lee, Geun-An; et al, 한국과학기술원, 2001 |
2007 | 열간압연공정의 루퍼제어시스템 개선을 위한 장력과 롤 속도 제어 퍼지 알고리즘 = Fuzzy algorithm for improvement of looper control system in hot rolling based on tension and roll speed controllink 정종엽; Jung, Jong-Yeob; et al, 한국과학기술원, 1998 |
2008 | 열복사를 고려한 미분탄의 연소 및 NOx 배출 현상에 관한 연구 = Investigation of combustion and NOx emission characteristics for pulverized coal with radiation effectslink 유명종; Yu, Myoung-Jong; et al, 한국과학기술원, 2000 |
2009 | 열성층배관 Thermal striping 영역에 존재하는 균열의 거동에 관한 연구 = A study on the behavior of a crack located at thermal striping zone in thermally stratified pipelink 이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1993 |
2010 | 열을 발생하는 용융물에 대한 냉각전략의 비교연구 = (A) comparative study of cooling strategies for volumetrically heat-generating molten materialslink 나한비; Na, Hanbee; et al, 한국과학기술원, 2017 |
2011 | 열음향 진동에 관한 연구 = A study on the thermoaxoustic oscillationlink 권영필; Kwon, Young-Pil; et al, 한국과학기술원, 1986 |
2012 | 열적 기계적 하중이 작용하는 구조물의 비탄성 해석과 수명 예측 = Inelastic analysis and life prediction for structures subject to thermomechanical loadinglink 윤삼손; Yoon, Sam-Son; et al, 한국과학기술원, 2003 |
2013 | 열전달을 고려한 스크롤 압축기내의 열역학적 냉매압축과정에 대한 연구 = Study on the thermodynamic compression process of refrigerant in the scroll compressor with heat transfer effectlink 장기태; Jang, Ki-Tae; et al, 한국과학기술원, 2006 |
2014 | 열하중 조건하의 임의 곡선 균열에 대한 보존 적분에 관한 연구 = A study on a conservation integral for arbitrarily curved cracks under thermal loadinglink 정해동; Chung, Hae-Dong; et al, 한국과학기술원, 1997 |
2015 | 열화 특성이 향상된 탄소나노튜브 포화흡수체 기반의 모드동기 광섬유 레이저 및 기초 응용에 관한 연구 = Thermal degradation-resistant CNT saturable absorber for mode-locked fiber laser and basic applicationlink 강대원, 한국과학기술원, 2022 |
2016 | 영구자석 매입형 BLDC 모터의 소음/진동 평가를 위한 전자기적 가진력의 특성화 = Characterization of electromagnetic excitation forces for interior permanent magnet type BLDC motors for noise/vibration assessmentlink 고홍석; Ko, Hong-Seok; et al, 한국과학기술원, 2003 |
2017 | 영구자석동기모터의 외란 관측 기반 강인한 토크 제어 및 새로운 약자속 제어법 = Disturbance observer based robust torque control and novel flux-weakening control of permanent magnet synchronous motorlink 김용훈; 김경수; et al, 한국과학기술원, 2018 |
2018 | 영상을 이용한 형상 측정 시스템의 측정 불확도에 관한 연구 = Uncertainty evaluation of the digital imaging system for dimensional metrologylink 이상윤; Lee, Sang-Yoon; et al, 한국과학기술원, 1998 |
2019 | 영역 분할과 특징 곡선 추출을 통한 유한 요소망으로부터 CAD 곡면 모델의 생성 = Construction of CAD surface models from finite element meshes using region clustering and feature curve extractionlink 박정민; Park, Jung-Min; et al, 한국과학기술원, 2010 |
2020 | 예혼합화염의 화염 내재적인 켈빈-헬름홀츠 불안정성에 관한 연구 = A study on the flame-intrinsic kelvin-helmholtz instability of premixed flameslink 곽영태; Guahk, Young-Tae; et al, 한국과학기술원, 2009 |
2021 | 오일러 방정식을 이용한 비행체 날개의 천음속 플러터 해석 = Transonic flutter analysis for airfoils and wings using euler equationslink 양성모; Yang, Sung-Mo; et al, 한국과학기술원, 1996 |
2022 | 오일러방정식을 이용한 시간영역에서의 비선형 음형파 방사 및 감소 해석 = Time domain analysis of nonlinear acoustic wave raddiations and reductions using an upwind finite difference scheme for euler equationlink 황창전; Hwang, Chang-Jeon; et al, 한국과학기술원, 1995 |
2023 | 온도 역계산을 위한 $CO_2$ 4.3μm 밴드의 복사 모델링 연구 = Radiation modeling of $CO_2$ 4.3μm band for temperature inversionlink 양수석; Yang, Soo-Seok; et al, 한국과학기술원, 1999 |
2024 | 온도구배가 있는 수평유체층 내의 전기유체역학적 대류 = Electrohydrodynamic convection in a horizontal fluid layer with temperature gradientlink 고형종; Ko, Hyung-Jong; et al, 한국과학기술원, 1988 |
2025 | 와류노즐로부터 분사되는 액막의 미립화에 관한 연구 : 주위 기체의 응축에 따른 효과 = Atomization of liquid sheet discharged from swirl nozzle-effect of ambient vapor condensationlink 고광웅; Koh, Kwang-Uoong; et al, 한국과학기술원, 2003 |
2026 | 와류와 웨지의 상호작용에 관한 수치연구 = Numerical study for the vortex-wedge interactionlink 박진호; Park, Jin-Ho; et al, 한국과학기술원, 1995 |
2027 | 외란 추정기를 이용한 비 구형 기어 브레이크 시스템의 제동 토크 적응 제어 = Adaptive braking torque control of electronic non-circular gear brake system using disturbance observerlink 박희람; Park, Heeram; et al, 한국과학기술원, 2017 |
2028 | 외부 가압 공기 베어링의 능동 제어에 관한 연구 = A study on active control of externally pressurized air bearingslink 이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1998 |
2029 | 외부 트리거링 신호를 이용한 비전 기반의 하이퍼-나이키스트 주파수 대역 모드해석 기법 = Vision-based modal analysis for hyper-Nyquist frequency range using external triggering signallink 김동현; 박영진; et al, 한국과학기술원, 2023 |
2030 | 외부가압 공기저어널베어링의 안정성 및 회전정밀도에 관한 연구 = A study on the stability and rotational accuracy of externally pressurized air journal bearinglink 김금모; Kim, Keum-Mo; et al, 한국과학기술원, 1992 |
2031 | 외연적 유한요소법을 이용한 차체 구조물의 충돌해석 = Crash analysis of auto-body structures with an explicit finite element methodlink 강우종; Kang, Woo-Jong; et al, 한국과학기술원, 2000 |
2032 | 용액 공정에 의한 고효율 고분자 발광 다이오드에 관한 연구 = A study on high-efficiency polymer light-emitting diodes fabricated by solution processeslink 윤홍석; Youn, Hong-Seok; et al, 한국과학기술원, 2011 |
2033 | 용액공정을 이용한 유기발광 다이오드용 WO3/Ag/WO3 다층투명전극에 관한 연구 = A study on solution-processed WO3/Ag/WO3 multilayer transparent electrode for organic light-emitting diodeslink 전강민; Jeon, Kang-Min; et al, 한국과학기술원, 2012 |
2034 | 용융탄산염 연료전지 스택의 균일화를 위한 3차원 유동 해석 = Three-dimensional fluid flow analysis for flow uniformity of molten carbonate fuel cell stacklink 김형섭; Kim, Hyung-Sop; et al, 한국과학기술원, 2014 |
2035 | 우주 추진용 고성능 친환경 단일추진제 추력기 개발 = Development of high performance green monopropellant thruster for space propulsionlink 백승관; 권세진; et al, 한국과학기술원, 2019 |
2036 | 운전자 주시거리와 인체응답 연구에 기반한 인간의 조향 특성에 가까운 운전자 모델 개발 = Development of driver model close to human driving characteristics based on driverlink 노기한; Noh, Ki-Han; et al, 한국과학기술원, 2013 |
2037 | 움직이는 조종면의 천이적 공력거동에 관한 수치적 연구 = Numerial study on transient aerodynamics of moving control surfaceslink 최성욱; Choi, Seong-Wook; et al, 한국과학기술원, 2000 |
2038 | 원격로봇수술을 위한 작업공간전환기능을 갖춘 수술 작동기의 설계 및 평가 = Design and evaluation of a surgical manipulator with workspace-conversion ability for telerobotic surgerylink 김기영; Kim, Ki-Young; et al, 한국과학기술원, 2012 |
2039 | 원심 임펠러의 내부 유동장에 근거한 이론적인 미끄럼 계수와 최적 디퓨저 설계 절차의 개발 = An analytical slip factor based on an internal flow field for centrifugal impellers and development of optimum design procedure for diffuserlink 팽기석; Paeng, Kee-Seok; et al, 한국과학기술원, 2001 |
2040 | 원심팬 소음의 발생 및 덮개를 통한 방사 해석 = An analysis of noise generation and radiation from centrifugal fans with a casinglink 전완호; Jeon, Wan-Ho; et al, 한국과학기술원, 1999 |