Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1141 to 1200 of 2170

1141
Sinter+HIP 공정에 의한 SiC whisker-alumina계 복합재료에 관한 연구 = A study on the sinter + HIPed SiC whisker-alumina compositeslink

이채현; Lee, Chae-Hyun; et al, 한국과학기술원, 1988

1142
Sintering-resistant $Pt@CeO_2$ nanoparticles for a high-temperature oxidation catalyst = 고온 산화 촉매 반응에 적합한 소결저항성을 갖는 백금@이산화세륨 나노입자 개발link

Lee, Siwon; Jung, WooChul; et al, 한국과학기술원, 2016

1143
Size control of iron oxide nanoparticles with organic phase synthesis methods = 유기 매체 합성법을 통한 산화철 나노입자의 크기 조절에 대한 연구link

Park, Min; Lee, Hyuck Mo; et al, 한국과학기술원, 2020

1144
Size effect on plasticity in submicron-sized NiCoCr medium-entropy alloys = 서브마이크로 크기의 니켈-코발트-크로뮴 중엔트로피합금의 크기 효과link

Lee, Geummi; Han, Seung Min; et al, 한국과학기술원, 2023

1145
Si+x-wt.% $Si_3N_4$ 계에서의 질화반응에 관한 연구 = A study on the nitridation in Si+x-wt% $Si_3N_4$ systemslink

이전국; Lee, Jeon-Kook; et al, 한국과학기술원, 1983

1146
Slag-Quartz-$Na_2CO_3$ 계의 foam 형성에 관한 연구 = Investigation of foam formation in slag-quartz-$Na_2CO_3$ systemlink

박현수; Park, Hyun-Soo; et al, 한국과학기술원, 1976

1147
SMAW으로 제조된 P122강 용접부의 고온 저주파 피로수명에 미치는 인장유지시간의 영향 = The effect of tensile hold time on the high temperature low cycle fatigue properties of P122 steel weldment produced by shield metal arc welding processlink

박성환; Park, Sung-Hwan; et al, 한국과학기술원, 2002

1148
$SmCo_5$ 영구자석에서 조성, 소결온도, 열처리 온도에 따른 자기적 성질과 미세조직에 관한 연구 = The effects of the composition, and sintering and heat treating temperature on magnetic properties and microstructures of $SmCo_5$ permanent magnetslink

김성수; Kim, Sung-Su; et al, 한국과학기술원, 1980

1149
Sn 솔더볼과 Ni 기판간의 계면 현상 및 열역학적 고찰 = Thermodynamic study and the interfacial phenomena of the Sn solder ball on the Ni substratelink

김종훈; Kim, Jong-Hoon; et al, 한국과학기술원, 2000

1150
Sn-(0.7Cu)-x 솔더 조인트의 크리프 특성 (x = Bi, Sb, Zn, 그리고 In)link

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2004

1151
Sn-3.5Ag 솔더의 벌크 특성과 Ni-P 하부 금속층과의 계면반응에 Co의 첨가가 미치는 영향 = Effects of Co addition on bulk properties of sn-3.5ag solder and interfacial reactions with Ni-P UBMlink

김동훈; Kim, Dong-Hoon; et al, 한국과학기술원, 2008

1152
Sn-Ag-Cu 솔더의 응고 경로에 따른 미세 구조 연구 및 계면 IMC 성장 거동 모델링 = Study on microstructures through the solidification paths of Sn-Ag-Cu ternary system and modeling for predicting IMC layer thickness of solder jointlink

김현득; Kim, Hyun-Deuk; et al, 한국과학기술원, 2004

1153
Sn-Bi-Ag계 무연솔더의 기계적 성질 = Mechanical properties of Sn-Bi-Ag lead-free solderlink

윤종문; Yoon, Jong-Moon; et al, 한국과학기술원, 1996

1154
Sn-Ni-Zn 3원계의 상평형 = Phase equilibria in the Sn-Ni-Zn ternary systemlink

장재원; Chang, Jae-Won; et al, 한국과학기술원, 2010

1155
$SnO_2$ 가스센서의 가스 반응속도및 선택성에 미치는 영향에 대한 연구 = The Effects of electric field on reaction speed and selectivity of thin $SnO_2$ gas sensorlink

김동일; Kim, Dong-Il; et al, 한국과학기술원, 1992

1156
$SnO_2$가스 센서의 전극구조가 $H_2$가스 감도에 미치는 영향 = The effect of electrode design on $H_2$ gas sensitivity of $SnO_2$ gas sensorlink

양성석; Yang, Seong-Seok; et al, 한국과학기술원, 1995

1157
$SnSe_2$-graphene composites as electrode for magnesium ion battery = 셀레늄화 주석 그래핀 복합체 마그네슘이온 전극 소재에 관한 연구link

Jeong, Hanbeom; Yuk, Jong Min; et al, 한국과학기술원, 2019

1158
Sol-gel process로 제작한 강유전체 PZT 박막의 열처리 분위기에 따른 누설 전류 특성 = Effect of annealing conditions on the leakage current characteristics of ferroelectric PZT thin films grown by Sol-gelprocesslink

조성문; Cho, Seong-Moon; et al, 한국과학기술원, 1997

1159
Sol-Gel 법을 이용한 PZT 분말 제조 = PZT powder preparation by sol-gel methodlink

정태석; Chung, Tae-Serk; et al, 한국과학기술원, 1992

1160
Solid-phase self-assembly of amyloid peptides and its cytotoxicity to cells = 고체 표면상 아밀로이드 펩타이드의 자기조립 및 세포독성 연구link

Ku, Sook-Hee; 구숙희; et al, 한국과학기술원, 2009

1161
Solution-processible TIPS-pentacene otft with low voltage driving by self-assembled monolayer gate dielectric = 자가조립단분자막 게이트 절연막을 이용한 저전압 구동 TIPS-pentacene 유기박막트랜지스터에 관한 연구link

Lee, Dong-Chan; 이동찬; et al, 한국과학기술원, 2012

1162
Spontaneous air/liquid interfacial synthesis of 2D metal-organic frameworks for $MoS_2$ scaffolding = $MoS_2$ 덮개용 이차원 금속-유기물 골격의 기상/액상 계면을 이용한 자발적 합성link

Rani, Pragya; Kang, Kibum; et al, 한국과학기술원, 2020

1163
Sputter 된 Al-1 wt.% Si-0.5 wt.% Cu 합금 박막의 국부부식에 대한 연구 = Localized corrosion behaviour of sputtered Al-1 wt.% Cu alloy thin filmlink

한길수; Han, Gil-Soo; et al, 한국과학기술원, 1992

1164
Sputter 증착된 Cu-In precursor의 셀렌화에 의한 $CuInSe_2$박막형성에 관한 연구 = A study on the formation of $CuInSe_2$ thin films prepared by selenizing sputtered Cu-In precursorslink

최준희; Choi, Jun-Hee; et al, 한국과학기술원, 1994

1165
Sr $TiO_3$ 계 GBL capacitor의 입계 현상에 관한연구 = Grain boundary phenomena of a Sr $TiO_3$-based grain boundary layer capacitorlink

천채일; Cheon, Chae-Il; et al, 한국과학기술원, 1987

1166
Sr, Pb) 고상고용체에서의 상온에서 안정화된 다강체 특성에 관한 연구 = $(Bi_{0.9}La_{0.1})FeO_3-A(Fe_{0.5}Nb_{0.5})O_3$, (Alink

김형철; Kim, Hyung-Chul; et al, 한국과학기술원, 2008

1167
$Sr_2IrO_4$와 $Ba_4Ir_3O_{10}$ 촉매 표면의 구조적 안정화에 따른 산소 발생 반응 안정성 향상 = Stability enhancement for oxygen evolution reaction by structural stabilization of $Sr_2IrO_4$ and $Ba_4Ir_3O_{10}$ electrocatalysts surfacelink

임영환; 정성윤; et al, 한국과학기술원, 2021

1168
Sreen printing법으로 제조한 Bi(Pb)-Sr-Ca-Cu-O계 초전도체 후막의 초전도 성질에 관한 연구 = A study of the Bi(Pb)-Sr-Ca-Cu-O superconductor thick film prepared by screen printing methodlink

김덕희; Kim, Duk-Hee; et al, 한국과학기술원, 1991

1169
$SrTiO_3$ 광전극의 반도성 및 광전기화학 성질에 관한 연구 = Studies on the semiconductive and photoelectrochemical properties of $SrTiO_3$ photoelectrodelink

현상무; Hyun, Sang-Moo; et al, 한국과학기술원, 1990

1170
$SrTiO_3$ 를 기초로 한 BL capacitor 에 있어서의 La doping 효과 = The La doping effect in the $SrTiO_3$ based barrier layer(BL) capacitorlink

김대영; Kim, Dae-Young; et al, 한국과학기술원, 1986

1171
$SrTiO_3$ 후막의 전기전도도 및 결함구저에 관한 연구 = A study on the electrical conductivity and defect structure in $SrTiO_3$ thick filmlink

김영호; Kim, Young-Ho; et al, 한국과학기술원, 1990

1172
$SrTiO_3$:Pr 형광체에 첨가한 Al의 구조적인 위치 및 발광개선에 관한 연구 = A study on the structural behavior and the luminescence enhancement of Al added in $SrTiO_3$:Pr phosphorlink

정연철; Jung, Youn-Chul; et al, 한국과학기술원, 1999

1173
$SrTiO_3$계 GBBLC의 미세구조와 유전특성에 미치는 BaO-CaO 침투효과 = Effect of BaO-CaO infiltration on microstructure and dielectric properties of $SrTiO_3$-based GBBLClink

구상윤; Koo, Sang-Yoon; et al, 한국과학기술원, 1998

1174
$SrTiO_3$를 이용한 반도체식 산소센서에 대한 연구 = Characterizations of semiconducting oxide oxygen sensor prepared by $SrTiO_3$ thick filmlink

조성순; Cho, Seong-Soon; et al, 한국과학기술원, 1993

1175
$SrTiO_3$에서 분위기 변화에 의한 core-shell 구조의 발생 = Formation of core-shell structures in $SrTiO_3$ by atmosphere changelink

정성윤; Joung, Soung-Yeun; et al, 한국과학기술원, 1997

1176
$SrTiO_3$와 $BaTiO_3$ 소결체의 화학구동력에 의한 계면이동 현상 = Chemically induced interface migration in $SrTiO_3$ and $BaTiO_3$link

윤경진; Yoon, Kyung-Jin; et al, 한국과학기술원, 1987

1177
Sr치환된 $Pb_2YbNbO_6$의 결정구조 및 유전특성 = The crystal structure and dielectric properties of Sr substituted $Pb_2YbNbO_6$ systemlink

박정우; Park, Jeong-Woo; et al, 한국과학기술원, 1995

1178
Stainless Fe-Cr-Ni-W maraging 강에서 W 함량과 열처리가 미세조직 및 기계적 성질에 미치는 영향 = The effects of W-contents and heat treatments on microstructure and mechanical properties in stainless Fe-Cr-Ni-W maraging steelslink

석진익; Suk, Jin-Ik; et al, 한국과학기술원, 1989

1179
STD 11 강에 Titanium Carbide 의 화학 증착에 관한 연구 = A study of chemical vapor deposition of titanium carbide onto STD 11 steellink

조북룡; Cho, Buk-Ryong; et al, 한국과학기술원, 1984

1180
STD11, SKH9 공구강에 화학증착된 Titanium nitride 의 증착특성, 미세조직 및 기계적 성질에 관한 연구 = A study on the deposition characteristics, microstructures, and mechanical properties of chemically vapor deposited TiN on STD11, SKH9 tool steelslink

김시범; Kim, Si-Bum; et al, 한국과학기술원, 1988

1181
Steels 위에 titanium carbide 의 화학증착에 관한 연구 = Titanium carbide coatings on steels by chemical vapor depositionlink

윤순길; Yoon, Soon-Kil; et al, 한국과학기술원, 1985

1182
Stencil printing으로 형성한 Pb-free solder bump와 UBM(under bump metallurgy) 간의 계면에 관한 연구 = Interfacil studies on the stencil printed Pb-free solder bump and UBM (under bump metallurgy)link

엄지용; Eom, Ji-Yong; et al, 한국과학기술원, 2000

1183
Stoichiometry control of SnSe thin films prepared by thermal coevaporation for photovoltaic and thermoelectric application = 동시열증착 기술을 통한 단일상을 가지는 SnSe 무기박막의 합성 및 조성 조절을 통한 태양전지, 열전소자로의 응용link

Jeong, Giuk; Shin, Byungha; et al, 한국과학기술원, 2017

1184
Strain gauge용 NiCrFe 박막의 저항 특성에 미치는 sputter 압력 및 박막 두께의 영향 = Effects of sputtering pressure and flim thickness on the resistivity properties of NiCrFe thin film for strain gaugelink

이성철; Lee, Sung-Chul; et al, 한국과학기술원, 2001

1185
Stretchable reduced graphene oxide/carbon nanotube fabric composite for wearable supercapacitor application = 신축성 그래핀산화물/탄소나노튜브 섬유 복합체 및 이를 이용한 웨어러블 슈퍼캐패시터에 관한 연구link

Kang, Seok Hun; 강석훈; et al, 한국과학기술원, 2016

1186
Strontium이 치환된 $PbMg_{1/2}W1_/2O_3$에서의 유전특성 및 상전이 거동에 관한 연구 = Dielectric property and phase transition in strontium substituted $PbMg_{1/2}W1_/2O_3$link

김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 1998

1187
Structural manipulation of electromagnetic absorption properties of subwavelength metallic elements = 파장보다 작은 금속 구조체의 형상 조절을 통한 전자기 흡수 특성 제어link

Heo, Min Sung; 허민성; et al, 한국과학기술원, 2014

1188
Structural tailoring of Ag/AgCl core/shell nanowires for enhanced oxygen reduction = 은/염화은 코어/쉘 나노와이어의 구조 변화를 통해 산소 환원 반응을 향상시키기 위한 연구link

Choi, Suyeon; Lee, Hyuck Mo; et al, 한국과학기술원, 2021

1189
Structure modification of halide perovskite to low-dimensions for efficient Light-Emitting Diodes = 발광다이오드를 위한 할라이드계 페로브스카이트의 저차원 구조 변화link

Shin, Min Gue; Shin, Byung Ha; et al, 한국과학기술원, 2017

1190
Studies on Effects of bonding parameters, substrate geometry, and anisotropic conductive film (ACF) material properties on ACF joint morphology and electrical characteristics = 본딩 변수, 기판구조, 이방성 전도 필름 재료 특성이 이방성 전도 필름 조인트 형상과 전기적 특성에 미치는 영향에 대한 연구link

Kim, Yoo-Sun; 김유선; et al, 한국과학기술원, 2012

1191
Studies on the reliabilities of BGA system-in-package (SiP) with an embedded die = 칩이 내장되어 있는 BGA 타입 system-in-package의 신뢰성에 대한 연구link

Yu, Seon-Young; 유선영; et al, 한국과학기술원, 2011

1192
Studies on the reliabilities of BGA system-in-package (SiP) with an embedded die = 칩이 내장되어 있는 BGA 타입 system-in-package의 신뢰성에 대한 연구link

Yu, Seon-Young; 유선영; et al, 한국과학기술원, 2011

1193
Study of precursor conditioning for high efficiency organic-inorganic hybrid perovskite solar cells = 전구체 컨디셔닝이 고효율 유무기 하이브리드 페로브스카이트 태양전지에 미치는 영향link

Boonmongkolras, Passarut; Shin, Byungha; et al, 한국과학기술원, 2018

1194
Study of surface nanoparticle formation by selective phase transition in 3d-transition metal doped $Sr_{0.98}TiO_{3-\delta}$ = 3d 전이금속이 도핑된 $Sr_{0.98}TiO_{3-\delta}$ 에서 선택적 상변화를 통한 표면 나노입자 생성에 관한 연구link

Kim, Jun Kyu; Jung, WooChul; et al, 한국과학기술원, 2018

1195
Study on (photo)electrochemical hydrogen evolution catalysts with ultrahigh mass activity using drop-casted platinum nanocube and nitrogen reduction catalysts based on Tin (IV) sulfide = 드롭 캐스팅한 백금 나노 큐브를 이용한 높은 질량 활성의 (광)전기화학 수소 환원 촉매 개발 및 황화주석(IV) 기반 질소 환원 촉매 연구link

Chu, Jinwoo; Shin, Byung Ha; et al, 한국과학기술원, 2022

1196
Study on battery-like synapse device with high linearity and wide dynamic range for a high efficient neuromorphic computing = 고효율 뉴로모픽 컴퓨팅을 위한 고선형성, 넓은 동적범위 특성의 배터리-기작 시냅스 소자 연구link

Nam, Hyun Soo; Kim, Kyung Min; et al, 한국과학기술원, 2021

1197
Study on electrical performance of solder ACF and reliability performance in camera module application = 솔더 이방성 전도 필름의 전기적인 특성과 카메라 모듈에서의 신뢰성 특성에 관한 연구link

Park, HongKeun; 박홍근; et al, 한국과학기술원, 2015

1198
Study on electrochemical performance of cobalt-based one-dimensional nanofibers as anode for lithium-ion battery and electrocatalyst for oxygen evolution reaction = 코발트 기반 1차원 구조의 나노섬유 제조를 통한 리튬이온전지의 음극 및 산소발생 촉매로써의 전기화학적 성능에 관한 연구link

Cho, Su-Ho; Kim, Il-Doo; et al, 한국과학기술원, 2017

1199
Study on electrochemical properties of rGO film and fabrication of rGO/MnO2 nanocomposite film for high capacitance hybrid-type supercapacitor = 고용량 하이브리드 타입의 슈퍼커패시터를 위한 rGO 필름의 전기화학적 특성 및 rGO/MnO2 나노 복합 필름 제작에 관한 연구link

Kim, Jun Beom; Kim, Sang Ouk; et al, 한국과학기술원, 2021

1200
Study on electrode modification in NbOx-based threshold switching device and its electrical characteristics and oscillation = NbOx 기반 휘발성 저항 변화 소자의 전극 변화에 따른 전기적 특성 및 진동 현상에 대한 연구link

Park, Woojoon; Kim, Kyung Min; et al, 한국과학기술원, 2021

rss_1.0 rss_2.0 atom_1.0