36 | 디젤엔진에서 연료분사기구의 시믈레이션 = Simulation of fuel injection system in a diesel enginelink 김영석; Kim, Young-Suck; 이정오; 박희용; et al, 한국과학기술원, 1979 |
37 | 레이디얼 피스톤 유압모타의 효율과 성능 특성 = Hydraulic radial piston motor efficiency and performance characteristiclink 김형의; Kim, Hyoung-Wei; et al, 한국과학기술원, 1980 |
38 | 마이크로 컴퓨터를 이용한 플리스틱 유압성형사출기의 자동제어 = Microcomputer application to the control of a hydraulic plastic injection molding machinelink 김종원; Kim, Jong-Won; 이종오; 홍성원; et al, 한국과학기술원, 1980 |
39 | 부레쉬레스 풍차 발전기의 성능해석 = Performance analysis of the self-excited brushless windmill-generatorlink 조규종; Cho, Kyu-Zong; et al, 한국과학기술원, 1976 |
40 | 부하 시뮬레이터의 힘 및 위치제어에 관한 연구 = Study on force and position control of load simulatorlink 이정철; Lee, Jung-Chul; et al, 한국과학기술원, 1994 |
41 | 비례 복합 밸브 내의 솔레노이드의 특성에 관한 연구 = Study on the solenoid characteristics of a hydraulic proportional compound valvelink 이대길; Lee, Dai-Gil; et al, 한국과학기술원, 1977 |
42 | 사판식 가변유압펌프의 전기유압식제어에 관한 연구 = Electro-hydraulic control of a variable displacement axial piston pumplink 현장환; Hyun, Jang-Hwan; 조형석; 이정오; et al, 한국과학기술원, 1999 |
43 | 성형 사출기의 공정제어에 관한 연구 = A study on process control of the injection molding machinelink 정연규; Chung, Yeon-Gyu; et al, 한국과학기술원, 1979 |
44 | 수직축 풍력 발전기의 특성 해석 = Performance analysis of a vertical axis wind turbinelink 김광호; Kim, Kwang-Ho; et al, 한국과학기술원, 1979 |
45 | 압력 보상 유량 제어 밸브의 동특성에 관한 연구 = Study on the dynamic characteristics of a pressure compensated flow control valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1976 |
46 | 연탄을 사용하는 온풍로에서의 열전달에 관한 연구 = A study on the heat transfer characteristics of a warm-air-furnace firing briquettelink 김재헌; Kim, Jae-Hun; et al, 한국과학기술원, 1977 |
47 | 원통형 이온질화 피처리물의 온도특성 = Temperature characteristics of a cylindrical workpiece in ion-nitriding processlink 임윤철; Rhim, Youn-Chul; et al, 한국과학기술원, 1980 |
48 | 유기압 현수장치의 감쇄 및 공압 스프링 특성에 관한 연구 = Study on the damping and the spring characteristic of a hydropneumatic suspension unitlink 주상현; Joo, Sang-Hyun; et al, 한국과학기술원, 1993 |
49 | 유압 구동식 사출기에서의 배압의 효과 = Effect of back pressure of a plastic reciprocating screw injection-molding machinelink 이성래; Lee, Seong-Rae; et al, 한국과학기술원, 1979 |
50 | 유압 디지탈 서보 실험 장치의 구성 및 압력 궤환을 이용한 유압 모터의 위치 제어 = A study on the design of a digital electrohydraulic servomechanism and the position control of the servo system using inner pressure control looplink 임상묵; Lim, Sang-Mook; et al, 한국과학기술원, 1995 |
51 | 유압 비례 복합 밸브의 릴리프 특성에 관한 연구 = Pressure relief characteristics of a hydraulic proportional compound valvelink 이윤정; Lee, Yoon-Jung; et al, 한국과학기술원, 1978 |
52 | 유압 비례 복합 제어밸브의 압력제어 특성에 관한 연구 = Pressure-relief characteristics of a hydraulic proportional compound valvelink 박석호; Park, Seok-Ho; et al, 한국과학기술원, 1980 |
53 | 유압비례 복합 밸브에서의 솔레노이드로 작동되는 감압밸브의 성능에 관한 연구 = Performance of a solenoid-operated, pressure reducing valve of a hydraulic proportional compound valvelink 이석희; Lee, Seok-Hee; et al, 한국과학기술원, 1978 |
54 | 유압비례복합밸브의 유량 및 압력제어 성능에 관한 연구 = Flow and pressure control performance of a hydraulic proportional compound valvelink 권대갑; Kwon, Dae-Khapp; et al, 한국과학기술원, 1977 |
55 | 유체력을 이용한 유량 조절 밸브의 해석과 설계 = Analysis and design of a flow control valve using flowforcelink 배상기; Bae, Sang-Gie; et al, 한국과학기술원, 1997 |
56 | 유한요소법을 사용한 보강된 풍차날개에 대한 응력해석 = Stress analysis of a reinforced windmill propeller using finite element methodlink 최동훈; Choi, Dong-Hoon; 이병호; 이정오; et al, 한국과학기술원, 1977 |
57 | 이온 질화 피처리물의 온도 특성 = Temperature characterstics of ion-nitrided workpiecelink 유성연; Yoo, Seong-Yeon; et al, 한국과학기술원, 1979 |
58 | 이온 질화에 관한 연구 = A study on ion nitridinglink 서진석; Seo, Jin-Seok; et al, 한국과학기술원, 1978 |
59 | 이온질화에 있어 탄소량의 영향과 이온질화강의마모특성 = Carbon effects in ion-nitriding and wear characteristics of ion-nitrided steellink 조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1979 |
60 | 자석을 이용한 유압조절 벨브에 관한 연구 = Study on a magnet-coupled hydraulic relief valvelink 조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1976 |
61 | 전기 유압식 서어보 인덱싱 시스템의 위치 제어및 관성 부하 시뮬레이터에 관한 연구 = A study on the position control of electrohydraulic servo indexing system and inertia load simulatorlink 안경관; Ahn, Kyoung-Kwan; et al, 한국과학기술원, 1992 |
62 | 전기 유압식 서어보 인덱싱 시스템의 적응제어에 관한 연구 = A study on the adaptive control of electro-hydraulic servo indexing systemlink 홍성철; Hong, Seong-Cheol; et al, 한국과학기술원, 1991 |
63 | 전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980 |
64 | 주퇴복좌시스템에 관한 연구 = Study on a coneentric-hydro-spring type recoil systemlink 이동호; Lee, Dong-Ho; et al, 한국과학기술원, 1975 |
65 | 지게차의 유압회로 해석 및 하강 조절 밸브의 동특성 연구 = An analysis and design of FD 50 M fortlift and the dynamic characteristics of down control valve on hunting phenomenon in the lift cylinderlink 이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1980 |
66 | 특수 차량의 동적 특성에 관한 연구 = A study on a dynamic characteristics of a special vehicle systemlink 나문수; Na, Moon-Soo; et al, 한국과학기술원, 1976 |
67 | 파일롯트형 릴리이프 밸브의 디지탈 시뮤레이션 = Digital simulation of a pilot type relief valvelink 김현수; Kim, Hyeon-Soo; et al, 한국과학기술원, 1979 |
68 | 펌프 제어형 전동 유압식 조타기구의 성능 해석 = Performance analysis of a pump-controlled electro-hydraulic steering gearlink 홍예선; Hong, Yeh-Sun; et al, 한국과학기술원, 1980 |
69 | 풍차용프로펠러 및 핏치조정장치에 관한 연구 = Study on the propeller and its pitch control systemlink 이세창; Lee, Sei-Chang; et al, 한국과학기술원, 1975 |
70 | 풍차자동핏치조정기구의 동역학적 해석 = A dynamic analysis of feathering device of a wind generatorlink 김상환; Kim, Sang-Hwan; et al, 한국과학기술원, 1978 |
71 | 풍차프로멜러에 대한 응력해석 = Stress analysis of a windmill propellerlink 안택순; Ahn, Taek-Soon; et al, 한국과학기술원, 1976 |
72 | 피로강도에 미치는 이온질화 처리의 영향 = Effect of ion-nitriding on fatigue strengthlink 강무진; Kang, Moo-Jin; et al, 한국과학기술원, 1979 |
73 | 환상(還像) 열파이프에 관한 연구 = A study on an annular heat pipelink 권영필; Kwon, Young-Pil; 이정오; 박희용; et al, 한국과학기술원, 1977 |
74 | 小形 Spin 安定型 球形로켓트에 關한 硏究 = Study on a small spin-stabilized spherical rocketlink 이종훈; Lee, Chong-Hoon; et al, 한국과학기술원, 1975 |
75 | 電場에서 온도구를 갖는 유체의 不安定연구 = Electro-convection of a fluid layer uniformly heated from belowlink 김교형; Kim, Kyo-Hyoung; et al, 한국과학기술원, 1976 |