22441 | 충격파관에서의 극초음속 정체 유동 특성 연구 = Study of hypersonic stagnation flow in a shock tubelink 심한슬; 박기수; et al, 한국과학기술원, 2018 |
22442 | 충격파에 의해 폭발물에 일어나는 화학반응 진행모델 = Modeling of reaction buildup process in shocked porous explosiveslink 손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1985 |
22443 | 충격피로하중이 복합하중으로 작용할 경우 평판에서의 균열 진전거동 = Crack propagation in plates under mixed-mode impact fatigue loadinglink 노승일; Noh, Seung-Il; et al, 한국과학기술원, 1993 |
22444 | 충격하중을 받는 연성 재료의 파괴 인성치 측정에 관한 연구 = A study on the fracture toughness of ductile material under impact loadinglink 이원호; Lee, Won-Ho; 엄윤용; 송지호; et al, 한국과학기술원, 1986 |
22445 | 충격하중을 받는 판형 콘크리트 구조물의 Mesh 의존성 = Mesh dependency in the analysis of a concrete plate structure under impact loadinglink 강한글; Gang, Han-Gul; et al, 한국과학기술원, 2013 |
22446 | 충돌 모델로 충격량을 이용한 가상 휴보 플랫폼의 개발 = Development of virtual Hubo platform using impulse as collision modellink 김인혁; Kim, In-Hyeok; et al, 한국과학기술원, 2006 |
22447 | 충돌 시뮬레이션을 이용한 에어백 시스템의 최적설계 = An optimum design of airbag system based on crash simulationlink 전상기; Jeon, Sang-Ki; et al, 한국과학기술원, 1996 |
22448 | 충돌 예측 정보를 반영한 에어백 전개 알고리즘 설계 = Design of an airbag deployment algorithm based on pre-crash informationlink 조광현; Cho, Kwang-Hyun; et al, 한국과학기술원, 2010 |
22449 | 충돌성능 향상을 위한 알루미늄 크래쉬 박스의 단면 형상 설계 = Cross-section shape design of an aluminum crash box for crashworthiness enhancementlink 이경호; Lee, Gyoung-Ho; et al, 한국과학기술원, 2007 |
22450 | 충돌제트 유동에 영향을 받는 Plate-fin heat sink 와 Pin-fin heat sink 의 열 성능에 대한 실험적 연구 = Experimental study on the thermal performance of plate-fin and pin-fin heat sinks with impinging flowlink 배진권; Bae, Jin-Kwon; et al, 한국과학기술원, 2007 |
22451 | 충돌제트에서의 열전달 현상에 관한 수치적 연구 = A numerical study for the heat-transfer phenomena in an impinging jet flowlink 이경원; Lee, Kyung-Won; et al, 한국과학기술원, 2002 |
22452 | 충상이중수산화물에 의한 인 제거 영향인자 연구 = Phosphorous removal by layered double hydroxidelink 김미주; Kim, Mi-Joo; et al, 한국과학기술원, 1995 |
22453 | 충전 흡착탑의 모델링과 동적 모사 = Dynamic modeling and simulation of packed adsorption columnlink 장민호; Chang, Min-Ho; et al, 한국과학기술원, 1998 |
22454 | 충전물의 형태와 재질이 충전탑 효율에 미치는 영향 = Effect of shape and wettability of packing materials on the efficiency of a packed columnlink 한명완; Han, Myung-Wan; et al, 한국과학기술원, 1984 |
22455 | 충전식 회전 원반 반응기에 의한 포도당 산화 효소 반응 = Ratating packed disk reactor filled with immobilized glucose oxidaselink 주인성; Joo, In-Seong; et al, 한국과학기술원, 1983 |
22456 | 충전식 회전 원반 반응기의 동특성 및 Modeling = Dynamic characteristics and modeling of rotating packed disk reactorlink 한재성; Han, Jae-Sung; et al, 한국과학기술원, 1985 |
22457 | 충전식 회전원반 반응 기내에서 아세톤 처리된 Humicola spp. 에 의한 리파마이신 S 의 생산 = Biological production of rifamycin S by acetone treated humicola spp. in a rotating packed disk reactorlink 정봉현; Chung, Bong-Hyun; et al, 한국과학기술원, 1984 |
22458 | 충전탑 내에서의 액체 분포 = Liquid distribution in packed columnlink 김태경; Kim, Tae-Gyung; et al, 한국과학기술원, 1985 |
22459 | 충전탑과 확산증류를 이용한 에탄올-물 분리 = The separation of ethanol-water mixture using the packed column and the diffusion distillationlink 김성철; Kim, Seong-Cheol; et al, 한국과학기술원, 1994 |
22460 | 충전탑내에서의 액체의 축방향 혼합 = Axial mixing of liquid in a packed columnlink 이귀호; Lee, Kwi-Hoh; et al, 한국과학기술원, 1984 |
22461 | 충전탑에서의 유효물질전달 면적과 액측 물질전달 계수 = Effective interfacial area and liquid-side mass transfer coefficient in packed columnslink 김영한; Kim, Young-Han; et al, 한국과학기술원, 1980 |
22462 | 충전탑의 모식화와 형상인자의 결정 = Modelling of packed column and determination of shape factor of packing materiallink 이철호; Lee, Choul-Ho; et al, 한국과학기술원, 1978 |
22463 | 충진탑에서의 표면갱신율과 충진물의 유효물질전달면적 = Fractional rate of surface renewal and the effective interfacial area of packing materials in a packed columnlink 이봉희; Lee, Bong-Hee; et al, 한국과학기술원, 1979 |
22464 | 취성재료의 연성연삭가공 = Ductile regime grinding of brittle materialslink 윤동선; Yoon, Dong-Seon; et al, 한국과학기술원, 1991 |
22465 | 취약점 점수 기반 향상된 침입 감내 시스템 = SEITS: secure enhanced intrusion tolerant system based on vulnerability scorelink 김희영; Kim, Hee-Young; et al, 한국과학기술원, 2013 |
22466 | 취화수소의 Chlorotrifluoroethylene 에의 광화학적 첨가반응 = Photochemical addition of hydrogen bromide to chlorotrifluoroethylenelink 박태진; Park, Tae-Jin; et al, 한국과학기술원, 1977 |
22467 | 측대역 전치필터쌍을 이용한 VDSL 시스템을 위한 심볼 타이밍 복구 알고리즘에 관한 연구 = Symbol timing recovery using single side prefilter pair for VDSL systemlink 김기현; Kim, Key-Hyun; et al, 한국과학기술원, 1998 |
22468 | 측면 공기 유입이 있는 액적 분무 연소기에 관한 수치적 해석 = A numerical study of an axisymmetric side-inlet spary combustorlink 박병용; Park, Byeung-Yong; et al, 한국과학기술원, 1992 |
22469 | 측면 완충 영역을 갖는 $LiNbO_3$ 자기정렬 리지 광도파로의 제작 = Fabrication of $LiNbO_3$ self-aligned ridge waveguide with side bufferlink 조영보; Cho, Young-Bo; et al, 한국과학기술원, 2003 |
22470 | 측면 장주기 격자를 이용한 실리콘 광도파로 편광 분리기 = Silicon-waveguide polarization splitter using sidewall long period gratingslink 오경진; Oh, Gyong-JIn; et al, 한국과학기술원, 2007 |
22471 | 측면 제트 유동에서 난류 모델 개선에 관한 수치적 연구 = Numerical study on improving turbulence Model in the supersonic side-jet injection flowlink 최미진; Choi, Mi-Jin; et al, 한국과학기술원, 2004 |
22472 | 측면 홈을 판 CT 시편을 이용한 J-저항 곡선결정 = Determination of J-resistance curves using side-grooved CT specimenslink 허건수; Huh, Kun-Soo; et al, 한국과학기술원, 1984 |
22473 | 측면에 단일 기관을 가지는 이차원 관로에서의 층류 유동 가시화 = Flow visualization of two dimensional laminar recirculating flow in a T-type extractor of a ductlink 최진희; Choi, Jin-Hee; et al, 한국과학기술원, 1981 |
22474 | 측정된 주파수 응답함수 합성을 이용한 구조물 동특성 변경 매트랩 툴박스 설계 = Design of an SDM toolbox for matlab based on synthesis of measured FRFlink 박종연; Park, Jong-Youn; 박윤식; 박영진; et al, 한국과학기술원, 2005 |
22475 | 측정시스템을 이용한 풍력 터빈 프레임 구조물의 해석 하중 도출 및 적용 = Load deduction and application of finite element analysis for wind turbine frame structure using measurement systemlink 강상규; Kang, Sang-Kyu; et al, 한국과학기술원, 2013 |
22476 | 측정시스템의 전달특성을 고려한 개선된 수동형 자동초점법 = An improved passive autofocusing algorithm considering transfer characteristtics of measurement systemslink 김기홍; Kim, Ki-Hong; et al, 한국과학기술원, 1996 |
22477 | 측정위치가 제한을 받는 경우 가상 요소를 이용한 시스템 규명 = System identification by using virtual elements when a structure has measurement limitationlink 김태현; Kim, Tae-Hyun; et al, 한국과학기술원, 2002 |
22478 | 층간 전단 하중을 받는 복합적 층판의 균열에 대한 간헐적인 층간결합의 영향 = Effects of intermittent interlaminar bonding on the cracked composite laminate under interlaminar shear loadinglink 유동희; Yoo, Dong-Hee; et al, 한국과학기술원, 1984 |
22479 | 층간소음 저감을 위한 음파 변조에 대한 수치적, 실험적 연구 = Numerical and experimental studies of noise modulation for floor impact sound reductionlink 양승진; Yang SeungJin; et al, 한국과학기술원, 2015 |
22480 | 층류 동축분류의 수소확산화염 구조에 관한 수치적 연구 = A numerical study on the structure of laminar coflowing $H_2$ diffusion jet flamelink 김충공; Kim, Chung-Gong; et al, 한국과학기술원, 1992 |
22481 | 층류 맥동류에서의 분산특성에 대한 실험적 연구 = Binary mixing characteristics in the axially pulsating flowlink 박부민; Park, Poo-Min; et al, 한국과학기술원, 1993 |
22482 | 층류 박리 기포에 관한 수치적 연구 = A numerical study of laminar separation bubblelink 조인현; Cho, In-Hyun; et al, 한국과학기술원, 1988 |
22483 | 층류 원통 이상 유동에서 복사 효과를 갖는 고 흡수, 방사 입자의 열확산에 대한 실험적 연구 = Experimental study on thermophoresis of highly absorbing, emitting particles with radiation effect in laminar tube two phase flowlink 강태원; Kang, Tae-Won; et al, 한국과학기술원, 1990 |
22484 | 층류 화염에서의 중간생성물 ($C_2$,CH,OH Radicals) 측정 = Measurement of $C_2$,CH,OH radicals in the propane-air laminar flamelink 이우진; Lee, Woo-Jin; et al, 한국과학기술원, 1995 |
22485 | 층별 변위장 이론을 이용한 복합재료 원뿔형 쉘 구조물의 열 좌굴 후 거동 해석 = Thermal postbuckling characteristics of composite conical shell structures using layerwise theorylink 우지혜; Woo, Ji-Hye; et al, 한국과학기술원, 2008 |
22486 | 층상형 구조전지를 위한 겔 고분자 전해질 기반 일체형 전극 구조 = Integrated electrode structure using gel polymer electrolyte for laminated structural batterylink 노정언; Noh, Jung-Eon; et al, 한국과학기술원, 2023 |
22487 | 층화 샘플링을 이용한 결정 트리의 효율적인 구성 방법 = Enfficient construction of decision trees using stratified samplinglink 정문영; Chung, Moon-Young; et al, 한국과학기술원, 2001 |
22488 | 치료 승마의 주기적, 비주기적 궤적 모델링 및 승마 시뮬레이터 적용 = Modeling a periodic and aperiodic trajectory of hippotherapy and application to horseback riding simulatorlink 임찬순; Lim, Chan Soon; et al, 한국과학기술원, 2015 |
22489 | 치환간의 종속관계를 이용한 단형 타입의 점진적인 유추 = An incremental monomorphic type inference using a dependency relation on substitutionslink 문부기; Moon, Boo-Gi; et al, 한국과학기술원, 2000 |
22490 | 친밀도 기반 로봇 인사 제스처 다양화를 위한 Primitive Motion의 조합 방법 = Combination method of primitive motion for various intimacy based robot greeting gesture generationlink 서주환; Seo, Ju-Hwan; et al, 한국과학기술원, 2014 |
22491 | 친밀한 관계의 사람 간 대립적 인터랙션의 계산 모델 = Computational model of conflictual interactions between people in close relationshiplink 이창훈; Lee, Changhun; et al, 한국과학기술원, 2015 |
22492 | 친수성 고분자와 분해가 가능한 가교제를 통한 선택적 탈착이 가능한 접합 방법 개발 = Development of selectively detachable adhesion via Hydrophilic polymer and cleavable crosslinkerslink 윤영빈; Yoon, Young Bin; et al, 한국과학기술원, 2024 |
22493 | 친수성 폴리우레탄-소수성 폴리스티렌 IPN의 혈액적합성에 관한 연구 = Blood compatibility of hydrophilic PU and hydrophobic PS IPNslink 노향우; Roh, Hyang-Woo; et al, 한국과학기술원, 1995 |
22494 | 친수성과 내마모성을 가지는 유-무기 하이브리드 코팅 물질의 제조 및 특성 = Synthesis and characterization of organic-inorganic hybrid coating materials having hydrophilic property and abrasion resistnacelink 차준규; Cha, Jun-Kyu; et al, 한국과학기술원, 2000 |
22495 | 친환경 단일추진제 촉매분해 모델링을 이용한 추력기 촉매대 설계 최적화 = Design optimization of green monopropellant thruster catalyst beds using catalytic decomposition modelinglink 정상우; 권세진; et al, 한국과학기술원, 2017 |
22496 | 친환경 마이크로-슈퍼커패시터 제조를 위한 목재상 펨토초 레이저-유도-그래핀 생성 = Green micro-supercapacitor fabrication enabled by wood-derived femtosecond laser-induced Graphenelink 김영렬; Kim, Young-Ryeul; et al, 한국과학기술원, 2023 |
22497 | 친환경 절삭을 위한 정전 분무 윤활에 관한 연구 = A study on electrostatic spray lubrication for eco-friendly cuttinglink 신광섭; Shin, Kwang-Sup; et al, 한국과학기술원, 2008 |
22498 | 친환경을 고려한 롤클리너 개발: 3R을 중심으로 = Development of a lint roller considering environment-friendly: focusing on 3Rlink 김재홍; 배상민; et al, 한국과학기술원, 2023 |
22499 | 친환경적 사용을 유도하는 제품 디자인 방법에 관한 연구 : 행동유도성 및 무의식적 행동의 적용을 중심으로 = A study on product design method deriving proenvironmental use : focused on applying affordance and thoughtless actlink 손민정; Sohn, Min-Jung; 이우훈; Lee, Woo-Hun; et al, 한국과학기술원, 2008 |
22500 | 침생검 시뮬레이터를 위한 햅틱 볼륨 렌더링 = Haptic volume rendering for a needle biopsy simulatorlink 경기욱; Kyung, Ki-Uk; et al, 한국과학기술원, 2001 |