Browse "MS-Journal Papers(저널논문)" by Subject KINETICS
Showing results 1 to 60 of 90
| A study of the oxidation behavior and the postannealing effect in a graded SiGe/Si heterostructure Lim, YS; Jeong, JS; Lee, JeongYong; Kim, HS; Shon, HK; Kim, HK; Moon, DW, JOURNAL OF ELECTRONIC MATERIALS, v.31, no.5, pp.529 - 534, 2002-05 |
| Abnormal grain growth of Ni3Sn4 at Sn-33Ag/Ni interface Kim, JH; Jeong, SW; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.45, no.3, pp.710 - 713, 2004-03 |
| Antioxidation properties of Ti0.83Al0.17N prepared using plasma-enhanced atomic layer deposition Lee, YJ; Kang, Sang-Won, APPLIED PHYSICS LETTERS, v.86, no.7, 2005-02 |
| Atomic-scale investigation of epsilon and theta precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations Song, W.; von Appen, J.; Choi, Pyuck-Pa; Dronskowski, R.; Raabe, D.; Bleck, W., ACTA MATERIALIA, v.61, no.20, pp.7582 - 7590, 2013-12 |
| Binaphthyl-based molecular barrier materials for phosphoric acid poisoning in high-temperature proton exchange membrane fuel cells Jeong, Dong-Cheol; Mun, Bohyun; Lee, Hyekyung; Hwang, Seung Jun; Yoo, Sung Jong; Cho, Eun Ae; Lee, Yunmi; et al, RSC ADVANCES, v.6, no.65, pp.60749 - 60755, 2016 |
| Boundary faceting-dependent densification in a BaTiO3 model system Lee, Min-Gon; Chung, Sung-Yoon; Kang, Suk-Joong L., ACTA MATERIALIA, v.59, no.2, pp.692 - 698, 2011-01 |
| Cathodic electrochemical deposition: a new strategy to enhance the activity and stability of silver cathodes for thin-film solid oxide fuel cells Kim, Hyunseung; Seo, Han Gil; Choi, Yoonseok; Lim, Dae-Kwang; Jung, WooChul, JOURNAL OF MATERIALS CHEMISTRY A, v.8, no.29, pp.14491 - 14497, 2020-08 |
| Characterization of Ag-x(Ge2Sb2Te5)(1-x) thin film by RF magnetron sputtering Kim, Dong Hun; Kim, Myung Sun; Kim, Ran-Young; Kim, Kyung Sun; Kim, Ho Gi, MATERIALS CHARACTERIZATION, v.58, no.5, pp.479 - 484, 2007 |
| Chemical and mechanistic analysis of photodynamic inhibition of Alzheimer's beta-amyloid aggregation Ahn, Minkoo; Lee, Byung Il; Chia, Sean; Habchi, Johnny; Kumita, Janet R.; Vendruscolo, Michele; Dobson, Christopher M.; et al, CHEMICAL COMMUNICATIONS, v.55, no.8, pp.1152 - 1155, 2019-01 |
| COARSENING BEHAVIOR OF L12 PRECIPITATES IN MELT-SPUN AL-TI-V-ZR ALLOYS LEE, HS; HAN, SZ; Lee, HyuckMo; LEE, ZH, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.163, no.1, pp.81 - 90, 1993-05 |
| Control of boundary structure and grain growth for microstructural design Choi, SY; Kang, Suk-Joong L, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 Book Series: MATERIALS SCIENCE FORUM, v.475-479, pp.1 - 5, 2005 |
| Critical grain size for abnormal grain growth of BaTiO3 in air Yang, Dong-Yeol; Choi, Si-Young; Kang, Suk-Joong L, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, v.114, pp.970 - 973, 2006-11 |
| Development of a 600 W Proton Exchange Membrane Fuel Cell Power System for the Hazardous Mission Robot Lee, Sang-Yeop; Min, In-Gyu; Kim, Hyoung-Juhn; Nam, Suk Woo; Lee, Jaeyoung; Kim, Sun Ja; Jang, Jong Hyun; et al, JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v.7, no.3, 2010-06 |
| Diffusion of Cation Impurities through Ceria Grain Boundaries Kwak, No Woo; Lim, Dae-Kwang; Jeong, Seung Jin; Byeon, Pilgyu; Chung, Sung-Yoon; Jung, WooChul, ADVANCED MATERIALS INTERFACES, v.7, no.20, 2020-10 |
| Direct Z-Scheme Tannin-TiO2 Heterostructure for Photocatalytic Gold Ion Recovery from Electronic Waste Kim, Kyeong Rak; Choi, Saehan; Yavuz, Cafer T.; Nam, Yoon Sung, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, v.8, no.19, pp.7359 - 7370, 2020-05 |
| Effect of ball-milling on dislocation generation and grain growth behavior in sintered NbC-Co Yang, Dong-Yeol; Yoon, Duk-Yong; Kang, Suk-Joong L, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, v.120, no.1407, pp.467 - 472, 2012-11 |
| Effect of binder compositions on microstructure, hardness and magnetic properties of (Ta,Nb)C-Co and (Ta,Nb)C-Ni cemented carbides Daoush, WM; Park, HS; Lee, KH; Moustafa, SF; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.27, pp.669 - 675, 2009-07 |
| Effect of grain boundary structure on diffusion-induced grain boundary migration in BaTiO3 Wang, SM; Kang, Suk-Joong L, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.88, pp.3267 - 3269, 2005-11 |
| Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5Ag and Ni/Cu substrate Choi, WK; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.28, no.11, pp.1251 - 1255, 1999 |
| Effect of oxygen partial pressure on grain boundary structure and grain growth behavior in BaTiO3 Jung, YI; Choi, SY; Kang, Suk-Joong L, ACTA MATERIALIA, v.54, pp.2849 - 2855, 2006-06 |
| Effect of phosphorous content on phase transformation induced stress in Sn/Ni(P) thin films Song, JY; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.21, no.9, pp.2261 - 2269, 2006-09 |
| Effect of Se modification on RuSey/C electrocatalyst for oxygen reduction with phosphoric acid Park, Hee-Young; Yoo, Sung Jong; Kim, Soo Jin; Lee, Sang-Young; Ham, Hyung Chul; Sung, Yung-Eun; Kim, Soo-Kil; et al, ELECTROCHEMISTRY COMMUNICATIONS, v.27, pp.46 - 49, 2013-02 |
| Effect of solvent on titania particle formation and morphology in thermal hydrolysis of TiCl4 Park, HK; Kim, Do Kyung; Kim, CH, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.80, no.3, pp.743 - 749, 1997-03 |
| Effect of step free energy on delayed abnormal grain growth in a liquid phase-sintered BaTiO3 model system Heo, Yoon Ho; Jeon, Sang-Chae; Fisher, John G.; Choi, Si-Young; Hur, Kang-Heon; Kang, Suk-Joong L, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.31, no.5, pp.755 - 762, 2011-05 |
| Effect of TiO2 addition on grain shape and grain coarsening behavior in 95Na(1/2)Bi(1/2)TiO(3)-5BaTiO(3) Moon, Kyoung-Seok; Dibyaranjan, Rout; Lee, Ho-Yong; Kang, Suk-Joong L, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.31, no.10, pp.1915 - 1920, 2011-09 |
| Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup-Shutdown Cycling I. Electrochemical Study Kim, Jae Hong; Cho, Eun Ae; Jang, Jong Hyun; Kim, Hyoung Juhn; Lim, Tae Hoon; Oh, In Hwan; Ko, Jae Jun; et al, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.157, no.1, pp.104 - 112, 2010 |
| Effects of interfacial Al oxide layers: Control of reaction behavior in micrometer-scale Al/Ni multilayers Kuk, Seoung Woo; Yu, Jin; Ryu, Ho Jin, MATERIALS & DESIGN, v.84, pp.372 - 377, 2015-11 |
| Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging Cho, Moon Gi; Kang, Sung K.; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.36, no.11, pp.1501 - 1509, 2007-11 |
| Effects of nitrogen on the repassivation behavior of type 304L stainless steel in chloride solution Park, JW; Rao, VS; Kwon, Hyuk-Sang, CORROSION, v.60, pp.1099 - 1103, 2004-12 |
| Effects of plasticizer on structures, non-isothermal crystallization, and rheological properties of polyarylates Yoo, Tae Jong; Song, Bu Seup; Lee, Youn Eung; Bae, Byeong-Soo; Jeong, Young Gyu, JOURNAL OF APPLIED POLYMER SCIENCE, v.135, no.3, 2018-01 |
| Effects of reactive diffusion on stress evolution in Cu-Sn films Song, JY; Yu, Jin; Lee, TY, SCRIPTA MATERIALIA, v.51, no.2, pp.167 - 170, 2004-07 |
| Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering Kim, J. Y.; Yu, Jin, APPLIED PHYSICS LETTERS, v.92, no.9, 2008-03 |
| Effects of residual S on Kirkendall void formation at Cu/Sn-3.5Ag solder joints Yu, Jin; Kim, J. Y., ACTA MATERIALIA, v.56, no.19, pp.5514 - 5523, 2008-11 |
| Electromigration induced Kirkendall void growth in Sn-3.5Ag/Cu solder joints Jung, Yong; Yu, Jin, JOURNAL OF APPLIED PHYSICS, v.115, no.8, 2014-02 |
| Enhanced densification of liquid-phase-sintered WC-Co by use of coarse WC powder: Experimental support for the pore-filling theory Kim, YP; Jung, SW; Kang, Suk-Joong L; Kim, BK, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.88, pp.2106 - 2109, 2005-08 |
| Enhanced oxygen exchange of perovskite oxide surfaces through strain-driven chemical stabilization Koo, Bonjae; Kwon, Hyunguk; Kim, YeonJu; Seo, Han Gil; Han, Jeong Woo; Jung, Woo Chul, ENERGY & ENVIRONMENTAL SCIENCE, v.11, no.1, pp.71 - 77, 2018-01 |
| Evaluation of densification mechanisms of liquid-phase sintering Lee, Sung-Min; Kang, Suk-Joong L, ZEITSCHRIFT FUR METALLKUNDE, v.92, no.7, pp.669 - 674, 2001-07 |
| Exceptionally Enhanced Electrode Activity of (Pr,Ce)O2-delta-Based Cathodes for Thin-Film Solid Oxide Fuel Cells Seo, Han Gil; Choi, Yoonseok; Jung, WooChul, ADVANCED ENERGY MATERIALS, v.8, no.19, 2018-07 |
| Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys Ryu, Ho Jin; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.363, no.1-2, pp.179 - 184, 2003-12 |
| Fabrication of attractive hectorite nanoplatelets by high-pressure homogenization for shear-responsive reversible rheology modification of organogels Kim, Doyeon; Lee, Sungho; Park, Daehwan; Cho, Yeong Sik; Choi, Sunyoung; Nam, Yoon Sung; Kim, Jin Woong, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, v.90, pp.274 - 280, 2020-10 |
| Fabrication of biomorphic SiC composites using wood preforms with different structures Lee, Dong J.; Jang, Jong J.; Park, Hee S.; Kim, Yun C.; Lim, Kwang H.; Park, Sang B.; Hong, Soon H., CERAMICS INTERNATIONAL, v.38, no.4, pp.3089 - 3095, 2012-05 |
| Fabrication of Tin-Cobalt/Carbon Composite Electrodes by Electrodeposition Using Cationic Surfactant for Lithium-Ion Batteries Lee, Cho-Long; Nam, Do-Hwan; Eom, Ji-Yong; Kwon, Hyuk-Sang, ELECTRONIC MATERIALS LETTERS, v.12, no.5, pp.622 - 627, 2016-09 |
| Feasibility of on-board hydrogen production from hydrolysis of Al-Fe alloy for PEMFCs Eom, KwangSup; Cho, EunAe; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.19, pp.12338 - 12342, 2011-09 |
| Formation of TiO2 thin films using NH3 as catalyst by metalorganic chemical vapor deposition Jung, Sung-Hoon; Kang, Sang-Won, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1, v.40, no.5A, pp.3147 - 3152, 2001-05 |
| Globularization behavior of ELI grade Ti-6Al-4V alloy during non-isothermal multi-step forging Kim, Jin Young; Park, Kyung-Tae; Shim, In Ok; Hong, Soon-Hyung, MATERIALS TRANSACTIONS, v.49, pp.215 - 223, 2008-01 |
| Grain growth in polycrystalline materials: Current understanding and future research directions Kang, Suk-Joong L.; Fisher, John G., OPEN CERAMICS, v.16, 2023-12 |
| Grain Growth in Si3N4-Based Materials Kang, Suk-Joong L; Han, Sang Moo, MRS BULLETIN, v.20, no.2, pp.33 - 37, 1995-02 |
| Grain-growth behavior during stepwise sintering of barium titanate in hydrogen gas and air Jung, YI; Choi, SY; Kang, Suk-Joong L, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.86, pp.2228 - 2230, 2003-12 |
| Growth behavior of rounded (Ti,W)C and faceted WC grains in a Co matrix during liquid phase sintering Yoon, BK; Lee, BA; Kang, Suk-Joong L, ACTA MATERIALIA, v.53, pp.4677 - 4685, 2005-10 |
| Growth mechanism of round-edged NbC grains in Co liquid Moon, H; Kim, BK; Kang, Suk-Joong L, ACTA MATERIALIA, v.49, no.7, pp.1293 - 1299, 2001-04 |
| GROWTH OF EPITAXIAL C54 TISI2 ON SI(111) SUBSTRATE BY INSITU ANNEALING IN ULTRAHIGH-VACUUM KIM, KH; LEE, JJ; SEO, DJ; CHOI, CK; HONG, SR; KOH, JD; KIM, SC; et al, JOURNAL OF APPLIED PHYSICS, v.71, no.8, pp.3812 - 3815, 1992-04 |
| Hierarchical analysis of alloying element effects on gas nitriding rate of Fe alloys: A DFT, microkinetic and kMC study Kang, Ku; Kwon, Soonho; Lee, Changsoo; Hong, Doosun; Lee, Hyuck Mo, ACTA MATERIALIA, v.174, pp.173 - 180, 2019-08 |
| Hierarchically Controlled Inside-Out Doping of Mg Nanocomposites for Moderate Temperature Hydrogen Storage Cho, Eun Seon; Ruminski, Anne M.; Liu, Yi-Sheng; Shea, Patrick T.; Kang, ShinYoung; Zaia, Edmond W.; Park, Jae Yeol; et al, ADVANCED FUNCTIONAL MATERIALS, v.27, no.47, pp.1704316, 2017-12 |
| In-situ isothermal aging TEM analysis of a micro Cu/ENIG/Sn solder joint for flexible interconnects Liu, Jinhong; Xu, Jianhao; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.169, pp.42 - 52, 2024-01 |
| In-situ measurement of continuous cooling beta ->alpha transformation behavior of CP-Ti Kim, SK; Park, Joong Keun, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.33, no.4, pp.1051 - 1056, 2002-04 |
| Insulin amyloid fibrillation at above 100 degrees C: New insights into protein folding under extreme temperatures Arora, A; Ha, C; Park, Chan Beum, PROTEIN SCIENCE, v.13, no.9, pp.2429 - 2436, 2004-09 |
| Investigation of cathode behavior of model thin-film SrTi(1-x)Fe(x)O(3-delta) (x=0.35 and 0.5) mixed ionic-electronic conducting electrodes Jung, WooChul; Tuller, Harry L., JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.155, no.11, pp.1194 - 1201, 2008-09 |
| Investigation of sputter-deposited Al-2at.%Cu layers by means of the tomographic atom probe (TAP) Choi, Pyuck-Pa; Al-Kassab, Talaat; Kirchheim, Reiner, SCRIPTA MATERIALIA, v.53, no.3, pp.323 - 327, 2005-08 |
| Mechanical alloying process of 93W-5.6Ni-1.4Fe tungsten heavy alloy 류호진; Hong, Soon-Hyung; Baek, WH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.63, no.1-3, pp.292 - 297, 1997-01 |
| Mechanical and rheological properties of the maleated polypropylene-layered silicate nanocomposites with different morphology Koo, CM; Kim, MJ; Choi, MH; Kim, Sang Ouk; Chung, In Jae, JOURNAL OF APPLIED POLYMER SCIENCE, v.88, no.6, pp.1526 - 1535, 2003-05 |
Discover
Open Access
- 265 OA Article
Date issued
- 1,015 2020 - 2024
- 2,625 2010 - 2019
- 2,168 2000 - 2009
- 1,240 1990 - 1999
- 179 1980 - 1989