Additions of bis-(sodium sulfopropyl)-disulfide (SPS) to the Cu electroplating bath strongly affected the characteristics of Kirkendall void formation when the Cu film is soldered with Sn-3.5Ag solder and subsequently aged. Voids were predominantly distributed near the Cu(3)Sn/Cu interface with SPS, but randomly distributed in the Cu(3)Sn layer without SPS. In situ Auger electron spectroscopy of voids at the Cu(3)Sn/Cu interface revealed surface segregation of S atoms, which came from SPS put into the bath as an additive. The S segregation to Cu(3)Sn/Cu interface lowers the interface energy, thereby accelerating the void nucleation. Assisted by the high surface diffusivity of Cu and the presence of excess vacancies arising from the Kirkendall effect, voids tend to localize at the interface, which would result in serious degradation of the joint reliability. (c) 2008 American Institute of Physics.