1 | Computational design of bimetallic nano catalyst and metal oxide catalysts : density functional theory and molecular dynamics studies = 전산모사를 이용한 이원계금속 및 금속산화물 나노촉매의 설계 : 전자밀도함수이론 및 분자동역학연구link Kim, Hyun-You; 김현유; et al, 한국과학기술원, 2009 |
2 | Conductive ink and paste for application of printed electronics on soft substrate = 유연기판 기반 인쇄전자 소자에 응용하기 위한 전도성 잉크 및 페이스트에 관한 연구link Lee, Yung Jong; Lee, Hyuck Mo; et al, 한국과학기술원, 2018 |
3 | Deep learning methods for identifying structure and chemisorption property of materials = 머신러닝을 이용한 재료 구조 식별 및 흡착 특성 예측link Hong, Doosun; Lee, Hyuck Mo; et al, 한국과학기술원, 2022 |
4 | Design of iron system for enhancement of nitridation rate: multi-scale computer simulation = 질화속도 향상을 위한 철강시스템 설계: 멀티스케일 전산모사 연구link Yeo, Sang-Chul; 여상철; et al, 한국과학기술원, 2014 |
5 | Development of oxygen reduction reaction catalysts for proton-exchange membrane fuel cell : from high-throughput screening to mechanistic study = 수소연료전지를 위한 산소환원촉매의 이론적 설계 및 메커니즘 규명link Kwon, Soonho; Lee, Hyuck Mo; et al, 한국과학기술원, 2018 |
6 | Dynamic properties and ligand induced structural evolution of nanoparticles for catalysts: density functional theory and molecular dynamics studies = 촉매나노입자의 동역학적 특성 및 리간드에 의한 구조적 변화 연구: 전자밀도함수 이론 및 분자동역학연구link Ryu, Ji-Hoon; 류지훈; et al, 한국과학기술원, 2011 |
7 | Effects of Zn addition on undercooling of Pb-free solder alloys and their interfacial reactions with Cu and Ni-P UBMs = 무연 솔더 합금의 과냉도 및 하부 금속층과의 계면 반응에 미치는 솔더 내 미량 Zn 첨가의 영향link Cho, Moon-Gi; 조문기; et al, 한국과학기술원, 2009 |
8 | Evaluation of properties to enhancement of elastomer materials for tire : multi-scale computational study = 타이어용 탄성 중합 물질의 성능 향상을 위한 특성 평가 : 다차원 전산모사 연구link Ryu, Myung Shin; Lee, Hyuck Mo; et al, 한국과학기술원, 2017 |
9 | Fabrication and characterization of Cu-based nanoink for the application in printed electronics = 인쇄전자에 이용하기 위한 구리기반 나노잉크의 합성과 특성평가link Kim, Na Rae; Lee, Hyuck Mo; et al, 한국과학기술원, 2016 |
10 | Fabrication of low-temperature-processable and highly conductive ag nano-ink for the printed electronics = 인쇄전자에 이용되는 저온 소결용 Ag 나노잉크의 제조에 관한 연구link Jung, In-Yu; 정인유; et al, 한국과학기술원, 2013 |
11 | Hydrogen storage properties of carbon nanotubes and BN nanotubes : density functional theory and reactive force field studies = 탄소나노튜브 및 보론나이트라이드나노튜브의 수소저장 특성 : 전자밀도함수 이론 및 리액티브 포스필드 연구link Han, Sang-Soo; 한상수; et al, 한국과학기술원, 2005 |
12 | improvement in the reactivity, selectivity and stability of supported metal nanocatalysts: computational study = 금속산화물 담지 금속 나노촉매의 반응성, 선택성, 안정성 향상을 위한 전산모사 연구link Kim, Da-Hye; 김다혜; et al, 한국과학기술원, 2012 |
13 | Investigation of Sn whisker growth in electroplated sn and Sn-Ag films as a function of plating variables and plastic deformation = 전해도금 Sn 과 Sn-Ag 필름의 Sn 휘스커 성장에 도금 변수와 소성 변형이 미치는 영향에 대한 연구link Chang, Jae-Won; 장재원; et al, 한국과학기술원, 2014 |
14 | Machine learning based catalytic property prediction of metal nanoparticles = 머신러닝 기반 금속나노입자 촉매 성능 예측link Bang, Kihoon; Lee, Hyuck Mo; et al, 한국과학기술원, 2020 |
15 | Metal nanowires synthesis and integration with Si electronics for wearable device = 웨어러블 디바이스 응용을 위한 금속 나노와이어 합성과 실리콘 소자와의 결합에 관한 연구link Koo, Jahyun; Lee, Hyuck Mo; et al, 한국과학기술원, 2017 |
16 | Mg-Al계 합금의 미세조직과 기계적 특성에 미치는 Ca과 Sr 첨가의 영향 = Effect of Ca and Sr additions on the microstructure and mechanical properties of Mg-Al-based alloylink 문병기; Moon, Byoung-Gi; et al, 한국과학기술원, 2011 |
17 | Modeling of spin-polarized transport and study of magnetoresistance = 스핀분극이동 모델링과 자기저항 연구link Noh, Eun-Sun; 노은선; et al, 한국과학기술원, 2007 |
18 | MRAM 용 자기터널접합 내 절연층의 산화조건 및 미세조직변화에 관한 고찰 = Microstructural variation with the various oxidizing conditions of the oxide layer in magnetic tunnel junction used in MRAMlink 배준수; Bae, Jun-Soo; et al, 한국과학기술원, 2002 |
19 | Novel catalyst design for electrochemical $N_2$ reduction based on nitrogenase imitating and high-throughput screening = 질소고정효소 모방 및 고속대량스크리닝 이용 전기화학적 질소환원을 위한 신개념 촉매 디자인link Shin, Kihyun; Lee, Hyuck Mo; et al, 한국과학기술원, 2016 |
20 | Pt-Co 박막 성장 및 편석 거동에 대한 MEAM (modified embedded atom method) 계산 및 몬테카를로 시뮬레이션과 응용에 관한 연구 = Study on the simulations of the Pt-Co thin film growth and segregation behavior using MEAM (modified embedded atom method) calculations and monte carlo methodlink 박성일; Park, Sung-Il; et al, 한국과학기술원, 2001 |
21 | Rational design of single atom catalysts through factor-based study: From formulating electronic factors to tailoring materials properties = 촉매의 특성에 영향을 주는 전자구조적 팩터 개발을 통한 단일 원자 촉매의 합리적 설계 연구link Choi, Jungwoo; 최정우; et al, 한국과학기술원, 2024 |
22 | Sn-Ag-Cu계 솔더 합금과 Cu, Ni 기판의 계면 현상 및 계면 생성물의 성장 거동에 관한 연구 = Studies on interfacial reaction and microstructural evolution of joint interface between Sn-Ag-Cu solder alloy and Cu, Ni substratelink 김종훈; Kim, Jong-Hoon; et al, 한국과학기술원, 2005 |
23 | Study on heterogeneous electrocatalysts based on binary transition metal systems for oxygen evolution and carbon dioxide electroreduction = 산소발생 및 이산화탄소환원용 이원계 전이금속기반 불균일계 촉매에 대한 연구link Lee, Changsoo; Lee, Hyuck Mo; et al, 한국과학기술원, 2019 |
24 | Study on multi-scale computational simulation to enhance properties of alloys = 다차원 전산모사를 이용한 합금 특성 향상에 관한 연구link Kang, Ku; Lee, Hyuck Mo; et al, 한국과학기술원, 2020 |
25 | Study on structural properties of nanoclusters using Basin-Hopping Monte Carlo and molecular dynamics = 몬테카를로법과 분자동역학을 이용한 나노클러스터의 구조 특성에 관한 연구link Kim, Hyoung-Gyu; 김형규; et al, 한국과학기술원, 2008 |
26 | Synthesis of Sn, Sn-Cu and Sn-Ag nanoparticles and fabrication of highly conductive ink for printed electronics = 인쇄 전자용 Sn, Sn-Cu 및 Sn-Ag 나노 입자 합성 및 고 전도성 나노 잉크 제조link Jo, Yun-Hwan; 조윤환; et al, 한국과학기술원, 2011 |
27 | Tailoring surface properties of oxygen reduction catalysts : experimental method and machine learning = 실험적 방법 및 기계 학습을 통한 산소 환원 촉매의 표면 특성 제어에 관한 연구link Park, Youngtae; Lee, Hyuck Mo; et al, 한국과학기술원, 2023 |
28 | Ti,V,Zr)$ 분산강화 Al 합금 및 $Al_{3-x}Mn_x(Ti,Zr)$ 금속간화합물의 상평형 및 미세구조에 관한 연구 = $Al_3M(Mlink 한승전; Han, Seung-Zeon; et al, 한국과학기술원, 1997 |
29 | β-Sn grain orientations in Pb-free solders and their effect on the reliability of solder joints = 무연 솔더의 β-Sn 결정립 방향성과 솔더 조인트 신뢰성에 미치는 영향link Seo, Sun-Kyoung; 서선경; et al, 한국과학기술원, 2010 |
30 | 무연 및 저연 Sn 계 솔더의 열역학적 합금설계 및 특성평가 = Thermodynamics-aided alloy design and evaluation of Pb-free and low Pb-bearing Sn solder alloy systemslink 윤승욱; Yoon, Seung-Wook; et al, 한국과학기술원, 1998 |
31 | 에피택시 구조의 하부강자성전극을 갖는 자기터널접합의 특성 = Properties of magnetic tunnel junctions with epitaxial ferromagnetic bottom electrodeslink 유지형; Yu, Ji-Hyung; et al, 한국과학기술원, 2004 |
32 | 전자부품 실장용 Sn-Ag-X 계 솔더 합금의 계면 현상과 특성 평가 = Interfacial phenomena and characterization of Sn-Ag-based solder alloy systems for electronic packaginglink 최원경; Choi, Won-Kyoung; et al, 한국과학기술원, 2001 |
33 | 전자패키지용 Sn-Ag-Cu계 무연 솔더 접합부의 금속간 화합물 성장과 전단강도에 미치는 냉각속도의 영향 = Effect of cooling rate on growth of IMC and shear strength of near eutectic Sn-Ag-Cu solder jointlink 정상원; Jeong, Sang-Won; et al, 한국과학기술원, 2004 |
34 | 전자패키징용 복합 솔더에서 Cu/Ni 비율에 따른 금속간 화합물의 형성과 특성 평가에 관한 연구 = A Study of the effect of the Cu/Ni ratio on formation of intermetallic compounds and evaluation of reliability in the Cu-Ni-bearing composite solderslink 이주원; Lee, Joo-Won; et al, 한국과학기술원, 2006 |
35 | 클러스터 변분법을 이용한 열역학 고찰과 상태도 계산 및 응용에 관한 연구 = On thermodynamic analysis and phase diagram calculation using cluster variation method and its applicationlink 서정룡; Soh, Jeong-Ryong; et al, 한국과학기술원, 1998 |