1681 | 링크 및 차체 위 진동신호를 이용한 주행 차량의 서스펜션 연결부 부싱에서의 전달력 규명에 관한 연구 = A study on indirect identification of transmission forces through rubber bushing in vehicle suspension system under driving condition by using vibration signals measured on link and car bodylink 채창국; Chae, Chang-Kook; et al, 한국과학기술원, 2001 |
1682 | 마그네슘 합금 판재의 변형률속도 의존 이방성/비대칭 항복함수 = Rate dependent anisotropic/asymmetric yield function for magnesium alloy sheetlink 김민기; 허훈; et al, 한국과학기술원, 2019 |
1683 | 마이크로 λ-분지관에서 액적 생성에 관한 실험적 연구 = An experimental study on drop formation at micro λ-junctionlink 염수진; Yeom, Su-Jin; et al, 한국과학기술원, 2011 |
1684 | 마이크로 분지형 T-분기관에서의 2상 플러그류의 분배 = Split of two-phase plug flow at microscale branching T-junctionlink 김석; Kim, Seok; et al, 한국과학기술원, 2015 |
1685 | 마이크로 연료 전지의 연료 개질을 위한 MEMS 촉매 반응기 = MEMS catalytic reactor for fuel reforming in micro fuel cell applicationslink 차홍석; Cha, Hong-Sseok; et al, 한국과학기술원, 2007 |
1686 | 마이크로 터빈 엔진의 적외선 신호 특성 및 감소 기술에 관한 연구 = Characterization and reduction of infrared signature of a micro turbine enginelink 구본찬; 백승욱; et al, 한국과학기술원, 2018 |
1687 | 마찰 감쇠기가 있는 블레이드 디스크의 동적 특성에 관한 연구 = A study on dynamic characteristics of a bladed disk with friction damperslink 유재한; Yoo, Jae-Han; et al, 한국과학기술원, 2006 |
1688 | 마찰 접촉문제에 대한 상보성 수식화의 적용 = A complementarity problem formulation for frictional contactlink 이석순; Lee, Seok-Soon; et al, 한국과학기술원, 1989 |
1689 | 마찰접촉문제에서의 민감도해석 및 최적설계 = Sensitivity analysis and optimal design for frictional contact problemslink 임세빈; Im, Se-Bin; et al, 한국과학기술원, 1992 |
1690 | 망막 OCT angiography : 시스템 개발 및 이를 이용한 설치류 질병모델에서의 혈관 및 혈류역학적 변화에 대한 종단적 분석 = Retinal optical coherence tomography angiography : system development and application to longitudinal analyses of vascular and hemodynamic changes in rodent disease modelslink 박장렬; 오왕열; et al, 한국과학기술원, 2020 |
1691 | 맥동관 냉동기의 설계 방법과 에너지 흐름 측정 = Design method of pulse tube refrigerator and energy flow measurementlink 기태경; Ki, Tae-Kyung; et al, 한국과학기술원, 2013 |
1692 | 멀티 레이트 시스템을 위한 적응 일반화된 예측 제어 = Adaptive generalized predictive control for multirate systemlink 박인오; Park, In-Oh; et al, 한국과학기술원, 1994 |
1693 | 멀티레터레이션에 근거한 점회절을 이용한 대영역 표면형상 측정 = Large scale surface profile measurement using point diffraction based on multilaterationlink 김병창; Kim, Byoung-Chang; et al, 한국과학기술원, 2003 |
1694 | 메시기반의 공구경로생성에 관한 연구 = A study on the mesh based tool path generationlink 이동윤; Lee, Dong-Yoon; et al, 한국과학기술원, 2005 |
1695 | 면내 회전 자유도를 가지는 변형률 평활화 3절점 삼각형 평면 쉘 요소의 개발 = Development of a strain-smoothed 3-node triangular flat shell element with drilling degrees-of-freedomlink 신창민; Shin, Chang-Min; et al, 한국과학기술원, 2014 |
1696 | 면내 회전 자유도를 가진 하이브리드 트레프츠 평면 셸 요소의 개발 = Development of hybrid trefftz flat shell element with drilling D.O.F.link 최누리; Choi, Noo-Ri; et al, 한국과학기술원, 2006 |
1697 | 모델 가스터빈 연소기내의 연소 불안정성 = A study on the instability of combustion in a model gas turbine combustorlink 홍정구; Hong, Jung-Goo; et al, 한국과학기술원, 2008 |
1698 | 모델 기반 조향특성 구현을 위한 일반화된 토크 피드백 제어기법 연구 = Generalized torque feedback control method for implementing model-based steering characteristicslink 이동욱; 김경수; et al, 한국과학기술원, 2018 |
1699 | 모드모형방법에 의한 간접적 입력규명 = Indirect input identification by modal model techniquelink 김영렬; Kim, Yeong-Ryeol; et al, 한국과학기술원, 1998 |
1700 | 모멘텀 비를 변화한 다중 동축 선회 젯 분사기의 연소 특성에 관한 연구 = Combustion characteristics of multi-element swirl coaxial jet injectors under varying momentum ratioslink 소윤석; 권세진; et al, 한국과학기술원, 2022 |
1701 | 모멘트 기반 질량추정을 이용한 고정익 무인항공기 초기 사이징 = Preliminary sizing of fixed-wing UAV using moment-based mass estimationlink 하현석; 안재명; et al, 한국과학기술원, 2022 |
1702 | 모바일 연료전지 시스템용 메탄올-과산화수소 산화수증기개질의 특성 = Characteristics of $MeOH-H_2O_2$ oxidative steam reforming for mobile fuel cell applicationslink 박병섭; Park, Byeongseob; et al, 한국과학기술원, 2016 |
1703 | 모세관 팽창을 통한 입자의 응축 성장에 관한 연구 = Condensational growth of particles through expansion in a capillary tubelink 정해영; Jeong, Hae-Young; et al, 한국과학기술원, 2001 |
1704 | 모아레 기법을 이용한 인체 형상의 삼차원 측정 = 3-D profile measurement of human bodies using $Moiré$ topographylink 정문식; Jeong, Moon-Sik; et al, 한국과학기술원, 2002 |
1705 | 모아레를 이용한 고온-고습 환경에서 플립 칩 전자 패키지의 신뢰성 평가 = Reliability evaluation for flip-chip electronic packages under high temperature and moisture condition using Moirelink 박진형; Park, Jin-Hyoung; et al, 한국과학기술원, 2009 |
1706 | 모아레현상을 이용한 스핀들의 반경방향 회전오차 측정 = Measurement of radial motion of spindle by moire phenomenonlink 박윤창; Park, Yoon-Chang; et al, 한국과학기술원, 1994 |
1707 | 무산소 환경 NaBH4/H2O2 직접 연료전지의 친수성 전극 제작과 안정제 농도에 따른 장기 성능 = Hydrophilic electrode and effect of stabilizer concentration on long-term performance of direct NaBH4/H2O2 fuel cell for air independent propulsionlink 장보선; Jang, Bosun; et al, 한국과학기술원, 2015 |
1708 | 무시멘트 인공 고관절 수술을 위한 골수강 가이드 이용 브로치 시스템의 설계 및 평가 = Design and evaluation of guided broach system for cementless total hip arthroplastylink 박영배; Park, Young-Bae; et al, 한국과학기술원, 2006 |
1709 | 무연 소더에서의 재료 거동 및 열피로 특성에 대한 미세 구조 영향 = Effects of microstructure on material behaviors and fatigue properties of lead-free solder materialslink 황태경; Hwang, Tae-Kyung; et al, 한국과학기술원, 2007 |
1710 | 무요소 다중 스케일 방법을 이용한 국부현상문제의 해석에 관한 연구 = A study on the meshfree multi-scale method for the analysis of local phenomenon problemslink 연정흠; Yeon, Jeoung-Heum; et al, 한국과학기술원, 2005 |
1711 | 무인기용 경량 PEM 연료전지의 마그네슘 분리판 제작 및 성능평가 = Fabrication and performance evaluation of magnesium bipolar plates of lightweight PEM fuel cell for UAVlink 박토순; Park, To-Soon; et al, 한국과학기술원, 2014 |
1712 | 무인기용 액티브 전력제어장치 개발 및 성능 평가 = Development and performance evaluation of active power management system for UAV'slink 이보화; Lee, Bohwa; et al, 한국과학기술원, 2016 |
1713 | 무한 고체내의 킹크균열의 해석 = Analysis of kinked crack in an infinite solidlink 최성렬; Choi, Sung-Ryul; et al, 한국과학기술원, 1990 |
1714 | 물 유화 연료 단일 액적의 상태량 측정과 분열 및 점화 특성에 관한 실험적 연구 = (An) experimental study of properties, breakup and ignition behavior of single water-emulsified fuel dropletlink 장규민; 김남일; et al, 한국과학기술원, 2020 |
1715 | 물-디젤 에멀젼 연료의 단일 액적 증발 및 연소 특성 연구 = Evaporation and combustion study of a single water-diesel emulsion dropletlink 원종한; 백승욱; et al, 한국과학기술원, 2019 |
1716 | 물의 정전분무에 관한 실험적 연구: 분무 불안정과 액적 분열 특성 = Experimental study on water electrospray: Characteristics of jet instability and droplet generationlink 박인용; Park, Inyong; et al, 한국과학기술원, 2015 |
1717 | 물질좌표계를 이용한 비등방성 탄성재료의 재료거동 및 유한요소 해석에 관한 연구 = A study on the finite element analysis and the constitutive equation for anisotropic hyperelastic material using convected frameslink 박현철; Park, Hyun-Cheol; et al, 한국과학기술원, 2001 |
1718 | 미분탄의 가압 가스화 특성 연구 = A study on the characteristics of gasification of pulverized coal particles at elevated pressurelink 신용승; Shin, Yong-Seung; et al, 한국과학기술원, 2000 |
1719 | 미세 채널에서 혼합 냉매의 유동 비등 열전달에 관한 실험적 연구 = Experimental study on the flow boiling heat transfer of mixed refrigerant in a microchannellink 인세환; In, Se-Hwan; et al, 한국과학기술원, 2010 |
1720 | 미세수술을 위한 정밀 동작, 힘 측정이 가능한 로봇 수술도구 및 동력부 = A robotic surgical instrument and actuation pack for a precise motion and force-sensing of micosurgerylink 공덕유; 권동수; et al, 한국과학기술원, 2022 |
1721 | 미세조직 예측을 위한 결정소성 유한요소해석 및 셀룰라 오토마타 기반의 멀티스케일 전산모사 = Multi-scale simulation by crystal plasticity finite element method and cellular automata for prediction of microstructurelink 김동규; Kim, Dong-Kyu; et al, 한국과학기술원, 2014 |
1722 | 미소 농도구배에 따른 삼지화염의 부상특성에 관한 연구 = A Study on Lift-off Characteristics of Triple Flames with Infinitesimal Fuel Concentration Gradientslink 서정일; Seo, Jeong Il; et al, 한국과학기술원, 2008 |
1723 | 미소 힘 측정기구 설계 및 성능 평가 = Mechanism design and performance evaluation of micro force measurement systemlink 최인묵; Choi, In-Mook; et al, 한국과학기술원, 2002 |
1724 | 미소피로균열의 진전 및 닫힘 거동 = Crack growth and closure behavior of short fatigue crackslink 방종명; Pang, Chong-Myong; 엄윤용; 송지호; et al, 한국과학기술원, 1993 |
1725 | 밀폐형 2상 자연순환 회로 내의 유동 불안정 현상 분석 = Analysis of flow instabilities in closed two-phase natural circulation loopslink 김영률; Kim, Young-Lyoul; et al, 한국과학기술원, 1997 |
1726 | 바이올린 브릿지의 위상 최적설계 = Topology optimization of violin bridgelink 유용균; Yu, Yong-Gyun; et al, 한국과학기술원, 2010 |
1727 | 박리를 수반하는 익형주위의 점성유동해석 : 격자계 생성 및 난류모델에 관한 연구 = Viscous-flow analysis about the airfoil with separation : a study on grid generation and turbulence modellink 손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1991 |
1728 | 박막 두께 형상 및 굴절률 측정용 분산 백색광 간섭법 = Dispersive white-light interferometry for measurements of thin-film thickness profile and refractive indexlink 김영식; Ghim, Young-Sik; et al, 한국과학기술원, 2007 |
1729 | 박막 초전형 적외선 감지소자의 제작과 실리콘 기판 두께 및 구성품의 배치에 따른 성능평가에 관한 연구 = Development of thin film pyroelectric sensors and their performance evaluation in terms of silicon substrate thickness and component layoutlink 고종수; Ko, Jong-Soo; et al, 한국과학기술원, 2000 |
1730 | 박막의 신뢰성 확보를 위한 고온 환경 하에서 기계적 거동 분석 및 피로 수명 평가 = Mechanical behavior and fatigue life evaluation under elevated temperature conditions for the reliability of thin filmslink 이용석; Lee, Yong-Seok; et al, 한국과학기술원, 2017 |
1731 | 박막의 실시간 타원계측을 위한 초점형 환상(環狀) 측정 방법에 대한 연구 = Peripheral measurement method for real-time ellipsometric data acquisition of thin filmslink 예상헌; Ye, Sang-Heon; et al, 한국과학기술원, 2008 |
1732 | 박판 형 부재의 굽힘 붕괴 형상 및 붕괴 후 거동 예측 = Collapse mode estimation and post-collapse analysis of thin-walled members under bendinglink 박문식; Park, Moon-Shik; et al, 한국과학기술원, 1994 |
1733 | 박판부재의 붕괴거동해석을 위한 극한해석의 쉘요소 수식화 = Shell element formulation for limit analysis of thin-walled structureslink 김현섭; Kim, Hyun-Sup; et al, 한국과학기술원, 2000 |
1734 | 박판성형 및 충돌성능 향상을 위한 고변형률속도에서의 차체강판 성형한계도 = Forming limit diagram of auto-body steel sheets at high strain rates for sheet metal forming and crashworthinesslink 김석봉; Kim, Seok Bong; et al, 한국과학기술원, 2010 |
1735 | 박판의 자유형상 가공을 위한 레이저 성형에 관한 연구 = A study on the laser forming of sheet metal for arbitrary shapelink 김지태; Kim, Ji-Tae; et al, 한국과학기술원, 2005 |
1736 | 반도체 소자의 선폭 및 피치 측정과 불확도 산정에 관한 연구 = Linewidth and pitch measurement of semiconductor devices and uncertainty estimationlink 고영욱; Ko, Yeoung-Uk; et al, 한국과학기술원, 1998 |
1737 | 반도체 웨이퍼상의 입자 침착속도의 측정 및 제어 = Measurement and control of particle deposition velocity on a semiconductor wafer surfacelink 배귀남; Bae, Gwi-Nam; et al, 한국과학기술원, 1994 |
1738 | 반도체 패키지 내에 존재하는 균열의 거동에 관한 연구 = A study on behavior of crack in a plastic packagelink 이혁; Lee, Hyouk; et al, 한국과학기술원, 1996 |
1739 | 반복연산에 의한 광위상간섭법의 일반알고리즘에 관한 연구 = A general algorithm of phase-shifting interferometry by iteration least squares fittinglink 공인복; Kong, In-Bok; et al, 한국과학기술원, 1995 |
1740 | 반사형 회절 격자 표식을 이용한 6자유도 변위 측정 시스템 = Six degrees of freedom displacement measurement system using a diffraction grating as a cooperative targetlink 김종안; Kim, Jong-Ahn; et al, 한국과학기술원, 2001 |