2338 | 사각 보행 로보트의 보행 속도와 에너지 효율 개선을 위한 다리 기구부의 최적 설계 = Optimal design of mechanism system for improving walking speed and efficiency of quadruped walking robotlink 조현균; Cho, Hyun-Kyun; et al, 한국과학기술원, 1992 |
2339 | 사각 보행 로봇의 동적 걸음새에 관한 연구 = A study on dynamic gait of a quadruped walking robotlink 김진섭; Kim, Jin-Sup; 오준호; 김수현; et al, 한국과학기술원, 1997 |
2340 | 사각 보행 로봇의 제어 시스템에 관한 연구 = A study on a control system of a quadruped walking robotlink 임대철; Lim, Dae-Cheol; et al, 한국과학기술원, 1995 |
2341 | 사각 유로의 Y자형 기-액 혼합 지점에서 액체의 주입 각도가 2상 유동 거동에 미치는 영향 = Effect of liquid injection angle on two-phase flow behavior at the Y-shaped gas-liquid mixing region of a rectangular channellink 서종우; Seo, Jong-Woo; et al, 한국과학기술원, 1995 |
2342 | 사각관을 이용한 태양열 집열기의 성능에 관한 연구 = A study on the performance of flat-plate solar collector using rectangular tubeslink 이상천; Lee, Sang-Chun; et al, 한국과학기술원, 1976 |
2343 | 사각보행로봇의 최적회전걸음새 및 Trajectory planning에 관한 연구 = Trajectory planning and optimal turning gait of quadruped walking robotlink 김종호; Kim, Jong-Ho; et al, 한국과학기술원, 1993 |
2344 | 사다리꼴 지지대를 갖는 연료 전지 전극판 사이의 3차원 유동 해석 = Analysis of the three-dimensional flow between the electrode plates of a fuel cell with distributed trapezoidal shape supportslink 유동렬; Ryu, Dong-Nyoel; et al, 한국과학기술원, 1999 |
2345 | 사단정수법을 이용한 승용차 조향장치의 진동 해석 = Vibration analysis of steering wheel in passenger car by using four-pole parameter methodlink 이준영; Lee, Jun-Young; et al, 한국과학기술원, 1992 |
2346 | 사면체 공동 기반의 플라스틱 샌드위치 소재의 설계에 대한 연구 = Sandwich construction composed of PP face and core with tetrahedral cavitieslink 이동효; Lee, Dong-Hyo; et al, 한국과학기술원, 2016 |
2347 | 사변형 또는 육면체 유한 요소의 컴퓨터 이용 격자 구성 = A computerized mesh generator for quadrilateral and curved brick finite elementslink 설승윤; Seol, Seung-Yun; et al, 한국과학기술원, 1985 |
2348 | 사상법을 이용한 프라즈마 절단공정에서의 키이홀 발생과정 및 열전달에 관한 연구 = A study on the keyholing and heat transfer in plasma arc cutting process using cylindrical body fitted coordinatelink 조성훈; Cho, Sung-Hoon; et al, 한국과학기술원, 1987 |
2349 | 사선 방향 레이저 조사에 의한 용접선 및 간극 측정 구현 = Implementation of weld seam recognition and gap measurement using slantly irradiated laser slitlink 김덕성; Kim, Duk-Sung; et al, 한국과학기술원, 1997 |
2350 | 사실적 힘 반향을 위한 햅틱마우스의 설계 및 응용 = Design of a novel haptic mouse system and its applicationslink 최희진; Choi, Hee-Jin; et al, 한국과학기술원, 2003 |
2351 | 사용자 프로그래밍을 지원하는 CAM 시스템의 구조에 관한 연구 = A study on the structure of CAM system supporting user's programminglink 정회민; Jeong, Hoi-Min; et al, 한국과학기술원, 1995 |
2352 | 사용자 프로파일 기반의 능동적 서술적 상호작용을 통한 사용자 적응형 추천 서비스 = User adaptive recommendation service using active, descriptive interaction based on user profilelink 박기루; Park, Ki-Ru; et al, 한국과학기술원, 2011 |
2353 | 사장교의 Cable 장력 보정 방법 및 풍하중에 대한 동력학적 해석 = Cable tension adjustment and dynamic analysis of cable-stayed bridgelink 현창헌; Hyun, Chang-Hun; et al, 한국과학기술원, 1984 |
2354 | 사출금형 가공시간 예측에 관한 연구 = A study on the estimation of machining time for injection moldslink 김창용; Kim, Chang-Yong; et al, 한국과학기술원, 2001 |
2355 | 사출성형 불량대책을 위한 지식베이스의 구축 = Construction of a knowledge-base for trouble-shooting in the injection molding processlink 최진성; Choi, Jin-Sung; et al, 한국과학기술원, 1995 |
2356 | 산란 음향 홀로그래피의 구현 방법론 = Realization of acoustic scattering holographylink 이상협; Lee, Sang-Hyub; 김양한; 김광준; et al, 한국과학기술원, 2003 |
2357 | 산소희박환경에서 수소생산을 위한 과산화수소를 이용한 디젤 자열개질기 연구 = Study on diesel autothermal reformer using hydrogen peroxide for hydrogen production in low-oxygen environmentslink 한광우; 배중면; et al, 한국과학기술원, 2016 |
2358 | 산업로보트의 설계 및 제작 - 기계장치 = Design and manufacture of industrial robot (KAISEM) - machine unitlink 박영제; Park, Yeong-Je; et al, 한국과학기술원, 1980 |
2359 | 산업용 로보트 구조에 대한 최적 설계의 응용 = Application of optimal design to the structural design of an industrial robotlink 박재학; Park, Jai-Hak; et al, 한국과학기술원, 1981 |
2360 | 산업용 로봇트의 영상궤환 제어를 위한 시각정보처리 시스템의 개발 = Development of a visual-data processing system for an image feedback control of industrial robotlink 조용철; Cho, Yong-Chul; et al, 한국과학기술원, 1986 |
2361 | 삼각 Patch를 이용한 곡면 Modelling에 관한 연구 = A study for surface modelling using triangular patcheslink 윤용일; Yun, Yong-Il; et al, 한국과학기술원, 1987 |
2362 | 삼각도법의 도면으로 부터 삼차원 물체의 형상화를 위한 프로그램의 개발 : 다면체의 경우 = Development of a program to generate 3-D structure from 2-D drawings : polyhedral shapeslink 김선주; Kim, Sun-Joo; et al, 한국과학기술원, 1986 |
2363 | 삼각형 Patch를 이용한 곡면 modelling 및 가공에 관한 연구 = A study for surface modelling and machining using triangular patcheslink 홍철기; Hong, Cheol-Kee; et al, 한국과학기술원, 1986 |
2364 | 삼각형 또는 사면체 유한요소를 이용한 자동격자 및 재 격자구성 프로그램 개발 = Automatic mesh generation and refinement using triangular and tetrahedron elementslink 임세빈; Im, Se-Bin; et al, 한국과학기술원, 1987 |
2365 | 삼중 동심관 버너에서 부분 예혼합 난류 화염의 전파에 관한 연구 = A study on the propagation of partially premixed turbulent flame in the triple concentric burnerlink 최진훈; Choe, Jin-hoon; et al, 한국과학기술원, 2008 |
2366 | 삼중 주기적 최소 곡면 기반 격자 구조의 밴드갭 특성 = Vibrational bandgap characteristics of TPMS based lattice structureslink 하지수; 오일권; et al, 한국과학기술원, 2020 |
2367 | 삼차원 입체 인쇄 성형물의 변형모사에 관한 연구 = A study on simulation of the deformation of 3-D stereolithography productslink 이정현; Lee, Jung-Hyun; et al, 한국과학기술원, 1994 |
2368 | 상·하 토치요동을 적용한 울트라 내로우 갭 용접에 관한 연구 = A study on ultra narrow gap welding with up-and-down torch oscillationlink 김두영; Kim, Doo-Young; et al, 한국과학기술원, 2003 |
2369 | 상관관계가 있는 다중 응답을 가진 모델에 대해 조건부 분포를 이용한 새로운 검증 척도 = (A) new validation metric using conditional distributions for models with multiple correlated responseslink 조성원; Cho, Sungwon; et al, 한국과학기술원, 2024 |
2370 | 상단부가 꺾인 방음벽의 음의 회절에 관한 연구 = A study of sound diffraction of partially inclined noise barrierlink 진병주; Chin, Byung-Joo; et al, 한국과학기술원, 2000 |
2371 | 상대 이음 좌표를 사용한 다물체 시스템의 동역학 해석 = Dynamic analysis of multibody system using relative joint coordinatelink 심익찬; Shim, Ick-Chan; et al, 한국과학기술원, 1992 |
2372 | 상대이음좌표 및 기호계산을 이용한 차량동력학 해석프로그램의 개발 = Development of vehicle dynamic analysis program using relative joint coordinate and symbolic computationlink 황인성; Hwang, In-Seong; et al, 한국과학기술원, 1994 |
2373 | 상방향 충돌제트의 Vortex 생성과 전개과정에 관한 실험적 연구 = Vortex formation and its developing process of the upward impinging jetlink 유상필; Yu, Sang-Pil; et al, 한국과학기술원, 2000 |
2374 | 상업용 부품 DB를 이용한 제품의 편집설계 = Configuration design of product using commercial part databaselink 이종묵; Lee, Jong-Mook; et al, 한국과학기술원, 2000 |
2375 | 상용 S/W를 이용한 소형가스터빈엔진 회전체의 동적 구조 해석 및 검증 = Dynamic Analysis of the Small-size Gas Turbine Engine Rotor Using Commercial S/W and its Limitationslink 정혁진; Chung, Hyuk-Jin; et al, 한국과학기술원, 2009 |
2376 | 상용유한요소해석프로그램(ABAQUS)에서 복소탄성계수의 정하중 의존성 반영을 통한 점탄성 제진요소의 동강성계수 산출 = Analysis of viscoelastic material under small-amplitude vibration superimposed on static compression strain using commercial FEM codelink 신윤호; Shin, Yun-Ho; et al, 한국과학기술원, 2004 |
2377 | 상용차량의 전복안정성 향상을 위한 능동 현가장치 제어기의 설계 = Active suspension controller design for improving rollover stability of commercial vehiclelink 손영일; Sohn, Young-Il; et al, 한국과학기술원, 1996 |
2378 | 상용코드를 이용한 MEMS용 기계설계 시스템의 개발 = Development of a mechancal design tool for MEMS for integrating commercial codeslink 허재성; Huh, Jae-Sung; et al, 한국과학기술원, 2000 |
2379 | 상지 반복 회전운동 시 관절 역학 일 기반 표면근전도신호 평균주파수 분석에 의한 근피로도 추정 = Estimation of muscle fatigue by analyzing sEMG mean power frequency based on joint mechanical work during upper limb repetitive rotationlink 정진성; et al, 한국과학기술원, 2021 |
2380 | 상지의 효과적인 재활을 위한 견관절 추종장치의 설계 및 실험적 검증 = Design and experimental verification of a passive shoulder joint tracking device for effective upper limb rehabilitationlink 이경섭; 박형순; et al, 한국과학기술원, 2017 |
2381 | 상태변수를 이용한, 불규칙 노면상을 달리는 특수차량의 동적해석 및 최적화에 대한 연구 = A study on dynamic characteristics and optimization of a special weapon vehicle moving on random road profile, using the state variable techniquelink 김재옥; Kim, Jae-Ok; et al, 한국과학기술원, 1979 |
2382 | 상판 위 질량의 움직임에 의해 가진되는 6-자유도 공압제진대의 응답에 대한 연구 = A study on response analysis of 6-DOF pneumatic vibration isolation table loaded by transient movements of carriage on itlink 선종오; Sun, Jong-Oh; et al, 한국과학기술원, 2007 |
2383 | 상퍼짐을 이용한 계단형 불연속성을 가지는 물체의 로보트 시각 서보 = Visual servoing of object with step discontinuites based on image defocusinglink 신진우; Shin, Jhin-Woo; et al, 한국과학기술원, 1996 |
2384 | 상하면의 비대칭적 특성을 고려한 소재의 업셋팅 단조에 관한 연구 = A study on the upset forging of non-circular blocks considering different frictional conditions at two flat dieslink 류민영; Lyu, Min-Young; 김승우; 김종호; et al, 한국과학기술원, 1989 |
2385 | 상향변환 나노 입자 박막을 이용한 3차 조화파 증폭에 대한 연구 = Study on the third harmonic generation enhancement using upconversion nanoparticle thin filmlink 김태원; Kim, Taewon; et al, 한국과학기술원, 2024 |
2386 | 새로운 개념의 고청징 유리용해로의 수치 모사 = Numerical simulation of a new high-refining glass melterlink 문길민; Moon, Kil-Min; et al, 한국과학기술원, 1995 |
2387 | 새로운 공구수명 방정식 : 공구끝 반경과 옆절삭각을 고려 = A new tool life equation : associated with nose radius and side cutting edge anglelink 이원백; Lee, Won-Back; et al, 한국과학기술원, 1979 |
2388 | 새로운 대용량 고승압에 적합한 듀얼 인덕터-전류공급형 DC/DC 컨버터 = A new dual inductor-fed DC/DC converter for high power step-up applicationslink 성현욱; Sung, Hyun-Wook; et al, 한국과학기술원, 2008 |
2389 | 새로운 오토인코더를 이용한 표면근전도 기반 동시 비례적인 손가락 힘 의도 추정 = Estimating simultaneous and proportional finger force intention based on surface EMG using novel autoencoderlink 조영걸; 김경수; Kim, Kyung-Soo; 김수현; et al, 한국과학기술원, 2018 |
2390 | 새로운 질감 제시 장치의 개발 = Development of a novel tactile display systemlink 손승우; Son, Seung-Woo; et al, 한국과학기술원, 2004 |
2391 | 새를 모방한 가변익 무인항공기의 비행 성능 검증을 위한 비행 환경에 따른 기동성, 민첩성 및 전력 소모 개선에 대한 연구 = (A) study on the improvement of maneuverability, agility, and power consumption according to the flight environment to verify bio-inspired morphing wing unmanned aerial vehicle flight capabilitylink 오승수; 김경수; et al, 한국과학기술원, 2023 |
2392 | 샌드위치 평판의 모드 감쇠 최대화를 위한 점탄성층 두께 결정법 = A method to determine optimum damping layer thickness of sandwich plate for maximum modal dampinglink 남대호; Nam, Dae-Ho; et al, 한국과학기술원, 2006 |
2393 | 생산 공정 계획 및 설계 : 낫에 관한 연구 = Manufacturing process planning and design : case study of "KOREAN SICKLE"link 김선명; Kim, Seon-Myung; et al, 한국과학기술원, 1981 |
2394 | 생산 능력을 고려한 발견적 롯트량 결정 기법 = A heuristic lot sizing algorithm with capacity constraintslink 오수철; Oh, Soo-Cheol; et al, 한국과학기술원, 1981 |
2395 | 생체 모방 복합재료의 균열 거동 모사를 위한 상장 모델링 = Phase-field modeling for crack propagation in bio-inspired compositeslink 정희영; 유승화; et al, 한국과학기술원, 2018 |
2396 | 생체 이미징을 위한 3차원 고해상도 FFOCT 시스템 개발 = Development of three-dimensional high-resolution full-field optical coherence tomography for in vivo imaginglink 정성훈; 오왕열; et al, 한국과학기술원, 2019 |
2397 | 생체적합성 미세바늘 제작기술 개발 및 경피 약물전달용으로의 제작된 미세바늘의 효용성 테스트 = Fabrication techniques of bio-compatible microneedles and its effectiveness test as a tool for transdermal drug deliverylink 김춘연; Jin, Chun-Yan; et al, 한국과학기술원, 2007 |