2122 | 바나듐 레독스 흐름 전지의 시스템 효율 향상을 위한 채널 가공된 카본페이퍼 전극에 관한 연구 = (A) study on carbon paper electrode with flow channel to enhance system efficiency for vanadium redox flow batterylink 오재형; 김성수; et al, 한국과학기술원, 2020 |
2123 | 바닥에 있는 싱크의 영향으로 인한 자유표면의 거동과 딥 생성 = Nonlinear transient free-surface flow and dip formation due to a sink at bottom walllink 추정호; Chu, Jeong-Ho; et al, 한국과학기술원, 1995 |
2124 | 바이모르프형 압전세라믹을 이용한 얇은 외팔보의 진동제어 = Vibration control of a thin cantilever beam by using a bimorph type of piezoelectric actuatorlink 윤해강; Youn, Hae-Kang; et al, 한국과학기술원, 1991 |
2125 | 바이모프의 생성 운동량을 이용한 압전 모터의 개발 = Development of piezoelectric motor using momentum generated by bimorphlink 최현도; Choi, Hyun-Do; et al, 한국과학기술원, 2004 |
2126 | 바이프리즘 스테레오 비젼 시스템을 이용한 GMA 용융지 형상 측정 = Measurement of GMA weld pool geometry using biprism stereo vision systemlink 이지혜; Lee, Ji-Hye; 유중돈; 나석주; et al, 한국과학기술원, 2000 |
2127 | 박막과 공동계의 저주파 특성 고찰 = The low frequency characteristics of a membrane-cavity systemlink 임종민; Im, Jong-Min; et al, 한국과학기술원, 1999 |
2128 | 박막과 음장의 연성을 이용한 덕트 소음 저감 방법 = Duct noise reduction by using membranelink 전종훈; Jeon, Jong-Hoon; et al, 한국과학기술원, 2004 |
2129 | 박막식 정수압 압출 공정에 있어서 임의의 형상의 압출에 대한 상계해 = An upper-bound solution for arbitrary shaped products on hydrofilm extrusion processlink 박태동; Park, Tae-Dong; et al, 한국과학기술원, 1985 |
2130 | 박막윤활하 Ball-on-disc 미끄럼접촉계에서의 표면거칠기 영향에 관한 연구 = A study on the effect of surface roughness in thin film at the ball-on-disc counterformal sliding contactlink 송응석; Song, Eung-Seok; et al, 한국과학기술원, 1986 |
2131 | 박판 금속 성형에서 드로우잉 힘에 대한 드로우 비이드의 효과에 대한 연구 = The effect of draw bead on drawing load in sheet metal drawinglink 나경환; Na, Kyoung-Whoan; et al, 한국과학기술원, 1982 |
2132 | 박판 성형을 위한 새로운 수치제어식 시작 방법의 개발 = Development of a new NC-controlled trial manufacturing process for sheet metal forminglink 조철훈; Cho, Cheol-Hoon; et al, 한국과학기술원, 1997 |
2133 | 박판 주조공정에서 공정의 특성 해석 및 공정 변수 선정에 관한 연구 = Analysis and parameter design of strip casting processeslink 배세철; Bae, Sei-Chul; 양동열; 조형석; et al, 한국과학기술원, 1997 |
2134 | 박판 페어의 기계적 접합을 위한 공정에 관한 연구 = Study on the mechanical joining process of a sheet metal pairlink 윤희주; Yoon, Hee-Ju; et al, 한국과학기술원, 2002 |
2135 | 박판금속성형에 있어서 곡선절곡에 관한 연구 = A study on curved line folding in sheet metal workinglink 이정우; Lee, Jeong-Woo; et al, 한국과학기술원, 1985 |
2136 | 박판금속의 단열 전단밴드 생성에 대한 실험 및 유한요소 해석 = Experiment and finite element analysis of the formation of adiabatic shear band in sheet metallink 임지호; Lim, Ji-Ho; et al, 한국과학기술원, 2000 |
2137 | 박판용접에 있어서 시각센서를 이용한 용접선 추적과 용접변수 설정에 관한 연구 = A study on the weld seam tracking and selection of welding parameters in thin plate welding using vision sensorlink 최동필; Choi, Dong-Pil; et al, 한국과학기술원, 1994 |
2138 | 박판의 점진적 성형 공정의 성형성 향상에 대한 연구 = Study on the improvement of formability for incremental sheet metal forminglink 김태정; Kim, Tae-Jeong; et al, 한국과학기술원, 1998 |
2139 | 반 능동 단속형 감쇠기 설계 및 성능 시험에 관한 연구 = A study of a semi-active on-off type damper design and its performance testlink 장봉식; Chang, Bong-Sik; et al, 한국과학기술원, 1988 |
2140 | 반 원호 주위를 흐르는 점성류의 수치적 계산 = Viscous flow calculation over a semi-circular arclink 전지수; Jun, Ji-Su; et al, 한국과학기술원, 1988 |
2141 | 반경 방향 인장력을 받는 외주고정 회전 원판의 진동해석 = Vibration of outer-clamped rotating disk subjected to radial tensionlink 박상욱; Park, Sang-Uk; et al, 한국과학기술원, 1989 |
2142 | 반구형 펀치에 의한 Stretch-forming 의 마찰을 고려한 해석 = Analysis of stretch-forming by hemispherical punch with frictionlink 심현보; Shim, Hyun-Bo; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
2143 | 반능동 단속형 감쇠기를 이용한 승차감 향상에 대한 연구 = A study on the improvement of ride comfort using semiactive damperlink 원광민; Won, Kwang-Min; et al, 한국과학기술원, 1989 |
2144 | 반능동 단속형 감쇠기를 이용한 현가 장치 개선에 관한 연구 = A study on the improvement of a suspension system adopting a semiactive on-off damperlink 최성배; Choi, Sung-Bae; et al, 한국과학기술원, 1988 |
2145 | 반도체 웨이퍼 가공 공정에서 흐름시간의 평균과 표준편차를 제어하기 위한 실시간 스케쥴링 방법 = A real-time scheduling methodology to control the mean and the standard deviation of the flow time in semiconductor wafer fabricationlink 윤현중; Yoon, Hyun-Joong; et al, 한국과학기술원, 1999 |
2146 | 반무한 채널에서의 2차원의 느린 점성 흐름 = Two-dimensional slow viscous flow in a semi-infinite channellink 이응재; Lee, Eung-Jae; et al, 한국과학기술원, 1981 |
2147 | 반사 간섭 분광해석을 이용한 미량단백질 검출 방법에 관한 연구 = Micro detection of protein using spectral analysis of reflection interferencelink 이광천; Lee, Kwang-Chun; et al, 한국과학기술원, 2003 |
2148 | 반사식 광탄성법을 이용한 노치를 가진 인장시편의 탄-소성 해석 = Elastic-plastic analysis of tensile specimens with notches by reflective photoelastic methodlink 김용완; Kim, Yong-Wan; et al, 한국과학기술원, 1985 |
2149 | 반사파가 있는 관내의 능동 소음제어 = Active noise control in a duct with reflected wavelink 오상헌; Oh, Sang-Heon; et al, 한국과학기술원, 1994 |
2150 | 반응 기구론에 의한 탄화수소 화염의 일산화 질소 생성에 관한 연구 = A study on nitric oxide formation in hydrocarbon flames by chemical kineticslink 김석준; Kim, Seock-Joon; et al, 한국과학기술원, 1985 |
2151 | 반응도가 증가하는 핵연료봉 피복관에 고차 쉘 이론을 적용한 응력 해석 = Stress analysis on fuel rod cladding under reactivity initiated accident by higher order shell theorylink 박진석; Park, Jin-Suck; et al, 한국과학기술원, 1986 |
2152 | 반응사출성형을 위한 폴리우레탄 포움의 성형 = Processing of polyurethane foam for reaction injection moldinglink 조우종; Cho, Woo-Jong; et al, 한국과학기술원, 1992 |
2153 | 반응표면법을 이용한 구조물 최적설계 프로그램의 개발 = Development of a structural optimal design code using a response surface method implemented on a CAD platformlink 염기선; Yeom, Kee-Sun; et al, 한국과학기술원, 2001 |
2154 | 반응표면법을 이용한 차체 부재의 충돌성능 향상을 위한 설계 최적화 = Design optimization of auto-body members for crashworthiness enhancement with the response surface methodlink 나승렬; Na, Seung-Ryul; et al, 한국과학기술원, 2004 |
2155 | 반작용휠-외팔보-관측장비 계의 지향각도오차 감소를 위한 가진부 절연 = A reaction wheel isolation for reduction of pointing error in the satellite observation modellink 허균철; Hur, Gyun-Chul; et al, 한국과학기술원, 2014 |
2156 | 받음각이 큰 익형주위의 비정상 유동장에 대한 수치해석 = Unsteady flow analysis about an airfoil at high angle of attacklink 최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 1998 |
2157 | 발견적 일정 계획 기법을 이용한 수주 생산체제에서의 자원 제약하의 일정 계획 = Resource-constrained scheduling in the job shop using project scheduling heuristic algorithmlink 김수영; Kim, Soo-Young; et al, 한국과학기술원, 1981 |
2158 | 발란스 된 로보트의 동특성 및 부최적 발란스 질량에 관한 연구 = A study on dynamic characteristics and sub-optimal balance mass of a balanced robot manipulatorlink 신철균; Shin, Chul-Kyun; et al, 한국과학기술원, 1985 |
2159 | 발란스된 로보트의 동특성 및 제어에 관한 연구 = A study on dynamic characteristics and control of a balanced robotic manipulatorlink 안무승; Ahn, Mu-Seung; et al, 한국과학기술원, 1984 |
2160 | 발열블럭이 주기적으로 부착된 2차원 유로 내의 혼합대류 열전달 해석 = Mixed convection in 2D channel with periodically placed rectangular heat generating blockslink 노성철; Roh, Sung-Cheoul; et al, 한국과학기술원, 1993 |
2161 | 밝기 영상의 주성분 분석과 상관 매칭법을 이용한 얼굴인식 = Face recognition using principal components analysis and correlation matching of intensity imageslink 함현철; Ham, Hyun-Chul; et al, 한국과학기술원, 1998 |
2162 | 방사와 투과를 이용한 층류 확산 화염의 매연온도 및 농도 측정 = Soot temperature and concentration measurement using emission/transmission tomography in laminar diffusion flamelink 송상종; Song, Sang-Jong; et al, 한국과학기술원, 1993 |
2163 | 방폭강과 발포알루미늄을 적층한 폭압 방호구조 시뮬레이션과 전투차량 방호분석 = Blast simulation of laminated structures of armor steel and aluminium foam and blast analysis of an armored vehiclelink 박주호; Park, Ju-Ho; et al, 한국과학기술원, 2012 |
2164 | 배가스 측정시 오차요인에 대한 연구 = A study on the measurement uncertainties of stack gas samplinglink 진영호; Chin, Young-Ho; et al, 한국과학기술원, 2000 |
2165 | 배치형 반복학습제어방법을 이용한 Slit coater의 제어기 설계 = Controller design for a slit coater using batch type iterative learning controllink 김성민; Kim, Sung-Min; et al, 한국과학기술원, 2004 |
2166 | 배터리로 구동되는 차량로봇의 효율적인 에너지 소비를 위한 경로계획 및 제어시스템 설계 구현 = Development of energy-efficient trajectory planning and control system for battery-powered car-like robotslink 유승범; You, Seung-bum; et al, 한국과학기술원, 2008 |
2167 | 백래쉬가 있는 기어시스템의 모델링 및 제어 기법의 연구 = A study on the modeling and control of gear system with backlashlink 김혜진; Kim, Hye-Jin; 오준호; 김수현; 박영진; Oh, Jun-Ho; et al, 한국과학기술원, 2001 |
2168 | 백색광을 이용한 광섬유 방식의 표면 플라즈몬 공명 센서 개발 = Development of fiber type surface plasmon resonance using white lightlink 고우석; Ko, Woo-Seok; 김수현; 곽윤근; et al, 한국과학기술원, 2003 |
2169 | 밸러스트 시스템의 설계 및 해석에 관한 수치적 연구 = A numerical study for the design and analysis of a ballast systemlink 김환익; Kim, Hwan-Ik; et al, 한국과학기술원, 2005 |
2170 | 밸브 개폐를 위한 양 팔과 상체의 모션 계획에 대한 연구 = Study on whole body motion planning for valve turninglink 김준혁; 김수현; et al, 한국과학기술원, 2017 |
2171 | 밸브 기구 동특성을 고려한 캠 형상 설계에 관한 연구 = A study on optimum cam profile extraction considering dynamic characteristics of cam-valve systemlink 박경조; Park, Kyoung-Jo; et al, 한국과학기술원, 1988 |
2172 | 밸브 충격에 의한 실린더 헤드 커버의 진동 및 소음해석 = Noise and vibration analysis of a cylinder head cover due to valve impactlink 김동룡; Kim, Dong-Ryong; et al, 한국과학기술원, 1991 |
2173 | 버블 패킹 방법을 이용한 자동 사면체 격자 생성 = Automatic tetrahedral mesh generation by bubble packing methodlink 박상일; Park, Sang-Il; et al, 한국과학기술원, 1999 |
2174 | 버블 패킹방법을 이용한 적응 격자 생성 = Bubble packing method for adaptive mesh generationlink 김정훈; Kim, Jeong-Hun; 이병채; 임세영; et al, 한국과학기술원, 2001 |
2175 | 벌크나노재 개발을 위한 다단계 등통로각압출 공정 연구 = A study for multi-pass equal channel angular extrusion with split dies for manufacturing bulk-nano materialslink 진영관; Jin, Young-Gwan; et al, 한국과학기술원, 2007 |
2176 | 범용 CNC 공작기계를 이용한 스크류 로터 제작에 관한 연구 = A study on the manufacturing of screw rotors using general CNC milling machineslink 서정도; Suh, Jung-Do; et al, 한국과학기술원, 2000 |
2177 | 범용 DSP를 이용한 선분 추출 알고리즘의 실시간 구현 = An implementation of real-time line extraction algorithm using a general purpose DSPlink 오학서; Oh, Hak-Seo; et al, 한국과학기술원, 1997 |
2178 | 범용 공작기계의 간이 NC화를 위한 연구 = A study on the retrofitting conventional machine tools into the NC machine toolslink 최정문; Choi, Jeong-Moon; et al, 한국과학기술원, 1989 |
2179 | 범용 로보트제어기의 구현및 이를 이용한 여유자유도 로보트의 제어 = Implementation of universal robot controller and application to redundant robotlink 박주이; Park, Choo-Lee; et al, 한국과학기술원, 1993 |
2180 | 범용 전문가 시스템 쉘을 이용한 선박설계도면에서의 치수자동화 = Auto-dimensioning of ship arrangement plans based on an expert system shelllink 김재희; Kim Jae-Hee; et al, 한국과학기술원, 1997 |
2181 | 베어링리스 유도 전동기의 설계 및 반경 방향 위치 제어 = Design and radial position control of bearingless induction motorlink 박성호; Park, Sung-Ho; et al, 한국과학기술원, 1998 |