16913 | 마감 재료가 콘크리트 수분확산에 미치는 영향 연구 = The effect of finishing materials on the moisture diffusion of concretelink 최원정; Choi, Won-joung; et al, 한국과학기술원, 2015 |
16914 | 마감 재료에 따른 콘크리트의 장기거동 특성 연구 = Long-term behavior of concrete with types of finishing materialslink 신상경; Shin, Sang-Kyung; 김진근; Kim, Jin-Keun; et al, 한국과학기술원, 2013 |
16915 | 마그네슘옥사이드담지 금속산화물촉매상에서 HFC-134a와 HCFC-1122 혼합물의 선택적 산화반응에 관한 연구 = A study on the selcetive oxidation of HFC-134a and HCFC-1122 mixture over MgO-supported metal oxide catalystslink 천영민; Cheon, Young-Min; et al, 한국과학기술원, 2000 |
16916 | 마그네시아-부분 안정화 지르코니아의 시효처리 효과에 관한 연구 = A study on the aging effect of Mg-PSZlink 남인준; Nam, In-Joon; 김종희; 김호기; et al, 한국과학기술원, 1986 |
16917 | 마그네시아-부분 안정화 지르코니아의 파괴인성 증진 거동에 관한 연구 = Study on the toughening behavior of Mg-PSZlink 김도형; Kim, Do-Hyeong; et al, 한국과학기술원, 1985 |
16918 | 마그네트론 스퍼터링에서의 타겟 식각 및 박막 증착에 관한 연구 = Study on the target erosion and film deposition in magnetron sputtering systemlink 최선희; Choi, Sun-Hee; et al, 한국과학기술원, 2003 |
16919 | 마그네틱 베어링의 강성에 관한 연구 = A study on the stiffness of magnetic bearinglink 정왕수; Jeong, Wang-Su; et al, 한국과학기술원, 1992 |
16920 | 마디선의 최적화와 바이올린 상판에의 적용 = Nodal line optimization and application to violin top platelink 김인겸; Kim In-Kyum; et al, 한국과학기술원, 2008 |
16921 | 마름모형 도심 마이크로 셀룰라 시스템의 트래픽 모델링 및 성능 분석 = Traffic modeling and performance analysis of diamond-shaped urban microcellular systemslink 정재훈; Chung, Jae-Hoon; et al, 한국과학기술원, 1999 |
16922 | 마모된 저널베어링의 정특성에 관한 수치해석 = Numerical analysis of journal bearings with worn zone : static characteristicslink 손길호; Sohn, Gil-Ho; et al, 한국과학기술원, 2006 |
16923 | 마모량 검사에 의거한 예방정비모형 = A preventive maintenance model based on the wear inspectionlink 공명복; Gong, Koung-Bock; et al, 한국과학기술원, 1982 |
16924 | 마스코트 타입 얼굴 로봇에 적용 가능한 3차원 정서 공간에서 동적 감정 모델 = Dynamic emotion model in 3D affect space for a mascot-type facial robotlink 박정우; Park, Jeong-Woo; et al, 한국과학기술원, 2007 |
16925 | 마스크 없는 Pendeo epitaxy 공정에 의한 저결함 GaN 박막의 미세구조 연구 = Microstructural characterization of the low dislocation density GaN films grown by maskless pendeo epitaxylink 박동준; Park, Dong-Jun; et al, 한국과학기술원, 2004 |
16926 | 마스크가 필요없는 노광 기술을 위한 대용량 폴리곤의 래스터화 = Rasterization of massive polygons for maskless lithographylink 신용철; Shin, Yong-Cheol; et al, 한국과학기술원, 2009 |
16927 | 마스터/슬레이브 복합형 고관절 전치환 수술로봇의 제어 = Control of a master/slave combined surgical robot for total hip arthroplastylink 허관회; Huh, Kwan-Hoe; et al, 한국과학기술원, 2001 |
16928 | 마아코브 과정을 따르는 시계열에 대한 예측모형 = A forecasting model for the time series with a markovian processlink 임석철; Rhim, Seok-Cheol; 배도선; 황학; et al, 한국과학기술원, 1982 |
16929 | 마이크로 OLED를 활용한 뉴럴 프로브 제작 연구 = Fabrication of $\mu$-OLEDs on neural probelink 이소민; 최경철; et al, 한국과학기술원, 2019 |
16930 | 마이크로 고체 추진제 추력기 요소의 성능 평가 = Performance evaluation of components of micro solid propellant thrusterlink 이종광; Lee, Jong-Kwang; et al, 한국과학기술원, 2004 |
16931 | 마이크로 구조물이 설치된 표면에 충돌하는 액적의 퍼짐 거동에 관한 실험적 연구 = An experimental study on spreading behavior of impinging liquid drop on micro-structured surfaceslink 장규민; Jang, Gyu Min; et al, 한국과학기술원, 2015 |
16932 | 마이크로 단일 추진제 추력기를 위한 촉매 반응기의 설계 및 가공 = Design and microfabrication of catalytic reactor for a micro monopropellant thrusterlink 안성용; An, Sung-Yong; et al, 한국과학기술원, 2006 |
16933 | 마이크로 마그네틱스 모델을 이용한 수직 자기 기록 매체의 열 특성해석 = Analysis of ther-mal after-effect of perpendicular magnetic recording media by using micromagnetics model with monte carlo methodlink 강병훈; Kang, Byung-Hoon; et al, 한국과학기술원, 1997 |
16934 | 마이크로 머신 기술로 제작된 열차단 구조를 이용한 가청 주파수 대역 필터의 설계 = Audio frequency filter design using micromachined thermally-isolated diaphragm structureslink 변희진; Byun, Hee-Jin; et al, 한국과학기술원, 2000 |
16935 | 마이크로 머신 소자(MEMS) 패키지의 열응력에 대한 연구 = A study on the thermo-mechanical stress of MEMS device packageslink 전우석; Jeon, Woo-Seok; et al, 한국과학기술원, 1998 |
16936 | 마이크로 볼로미터의 감지 물질로 사용되는 외인성 도핑된 티타늄 산화막에 관한 연구 = A study on extrinsic doped titanium oxide film for the microbolometer sensing materiallink 신영봉; Shin, Youngbong; et al, 한국과학기술원, 2015 |
16937 | 마이크로 볼로미터의 스케일링을 위한 구조 최적화에 대한 연구 = (A) study on structure optimization for scaling-down microbolometerlink 김용갑; 이귀로; et al, 한국과학기술원, 2017 |
16938 | 마이크로 비드의 자동적인 포지셔닝을 이용한 생체 분석을 위한 전기 화학 발광 칩 = An ECL chip for Bio analysis using autonomous microbeads positioninglink 전현재; Jeon, Hyun-Jae; et al, 한국과학기술원, 2003 |
16939 | 마이크로 스케일 촉매 연소기에서의 수소-공기 예혼합 가스의 연소 특성 = Combustion characteristics of premixed hydrogen-air in micro scale catalytic combustorslink 최원영; Choi, Won-Young; et al, 한국과학기술원, 2005 |
16940 | 마이크로 스트럭쳐 GaN 기술을 이용한 생체 이식형 flexible LED bio-sensor = Implantable, flexible LED bio-sensor using μs-GaN technologylink 이상용; Lee, Sang-Yong; et al, 한국과학기술원, 2011 |
16941 | 마이크로 스트럭쳐 GaN 기술을 이용한 생체 이식형 flexible LED bio-sensor = Implantable, flexible LED bio-sensor using μs-GaN technologylink 이상용; Lee, Sang-Yong; et al, 한국과학기술원, 2011 |
16942 | 마이크로 역학에 의하여 설계된 고인성 섬유복합 모르타르의 개발 = Development of high ductile fiber-reinforced mortar designed based on micromechanicslink 김희신; Kim, Hee-Shin; et al, 한국과학기술원, 2005 |
16943 | 마이크로 연료 개질을 위한 촉매 반응기의 설계, 제작 및 성능평가 = Design, fabrication and performance evaluation of catalytic reactor for micro fuel reforminglink 김태규; Kim, Tae-Gyu; et al, 한국과학기술원, 2005 |
16944 | 마이크로 열전 발전 소자 제작을 위한 박막 열전 소재의 특성 개선과 공정 개발 = Research on improvement in the characteristics of thermoelectric thin films and process development for micro-thermoelectric devicelink 박지원; 조병진; et al, 한국과학기술원, 2020 |
16945 | 마이크로 유전자 알고리즘을 이용한 보강 적층된 복합재 구조물의 최적설계 = Optimal design of composite laminated stiffened structures using micro genetic algorithmlink 이무근; Yi, Moo-Keun; et al, 한국과학기술원, 2006 |
16946 | 마이크로 이상 유체 혼합을 위한 마이크로 기포 생성 = Microbubbles generation for two-phase flow micromixinglink 염수진; Yeom, Su-Jin; et al, 한국과학기술원, 2007 |
16947 | 마이크로 채널에서 두 유체 혼합 = Two-fluid mixing in a microchannellink 김병재; Kim, Byoung-Jae; et al, 한국과학기술원, 2003 |
16948 | 마이크로 컴퓨터 통신망의 High-level protocol 에 관한 연구 = A study on the high-level protocols for a microcomputer networklink 최은호; Choi, Eun-Ho; et al, 한국과학기술원, 1984 |
16949 | 마이크로 컴퓨터 통신망의 Physical layer 구성에 관한 연구 = A study on the implementation of physical layer for a microcomputer networklink 송기열; Song, Ki-Yul; et al, 한국과학기술원, 1984 |
16950 | 마이크로 컴퓨터 통신망의 링크 제어에 관한 연구 = A study on the link control for a microcomputer networklink 정재일; Chung, Jae-Il; et al, 한국과학기술원, 1984 |
16951 | 마이크로 컴퓨터를 사용한 자동차의 다기능 정보 처리 시스템 = An expandable microcomputer multifunction vehicular information systemlink 유준; Lyou, Joon; et al, 한국과학기술원, 1980 |
16952 | 마이크로 컴퓨터를 이용한 DLTS-C-V 측정장치의 제작 = Implementation of an automated deep level transient spectroscopy and C-V measurement system with microcomputerlink 김경태; Kim, Kyeong-Tae; et al, 한국과학기술원, 1984 |
16953 | 마이크로 컴퓨터를 이용한 Micro-DB 시스템의 설계및 구현 = Micro-DB design and implementation for microcomputerslink 김병섭; Kim, Byung-Sup; et al, 한국과학기술원, 1982 |
16954 | 마이크로 컴퓨터를 이용한 공정 품질 관리 시스템의 설계 = A computer-based process quality control systemlink 이준영; Lee, Joon-Young; et al, 한국과학기술원, 1984 |
16955 | 마이크로 컴퓨터를 이용한 다성분계의 pH 제어 = Micro computer control of pH in a multi-component systemlink 이병철; Lee, Byoung-Chul; et al, 한국과학기술원, 1983 |
16956 | 마이크로 컴퓨터를 이용한 수치제어 장치용 입력 및 Display system = A microcomputer based data input & display system for a numerical controllerlink 신유식; Shin, Yu-Shik; et al, 한국과학기술원, 1982 |
16957 | 마이크로 컴퓨터를 이용한 수치제어장치 시스템의 소프트웨어(Ⅱ) = Micro computer based numerical control system software(Ⅱ)link 이준환; Lee, Joon-Whoan; et al, 한국과학기술원, 1982 |
16958 | 마이크로 컴퓨터를 이용한 원격탐사 영상처리 시스템에 관한 연구 : 입출력 시스템 = A study on a microcomputer based image processing system for remote sensing : I/O systemlink 이경국; Lee, Kyung-Kook; 변증남; 김명환; et al, 한국과학기술원, 1984 |
16959 | 마이크로 컴퓨터를 이용한 자동차의 점화시기 제어 = Microcomputer based ignition timing control for automobileslink 김용립; Kim, Yong-Lip; et al, 한국과학기술원, 1980 |
16960 | 마이크로 컴퓨터를 이용한 조립용 로보트의 실시간 동적제어에 관한 연구 = A study on microcomputer based real time dynamic control of assembly robot systemlink 민병의; Min, Byung-Eui; 변증남; 윤명중; et al, 한국과학기술원, 1984 |
16961 | 마이크로 컴퓨터를 이용한 진동면 모우드형상의 자동 시각화에 관한 연구 = On-line visualization of mode shapes of vibrating surfaces using microcomputerlink 김규태; Kim, Gyu-Tae; et al, 한국과학기술원, 1985 |
16962 | 마이크로 컴퓨터를 이용한 플리스틱 유압성형사출기의 자동제어 = Microcomputer application to the control of a hydraulic plastic injection molding machinelink 김종원; Kim, Jong-Won; 이종오; 홍성원; et al, 한국과학기술원, 1980 |
16963 | 마이크로 컴퓨터에 의한 사출 성형의 공정제어 = Microcomputer aided process control of injection moldinglink 임채영; Lim, Chai-Young; et al, 한국과학기술원, 1982 |
16964 | 마이크로 프로그램 개발 시스템에 관한 연구 = A microprogram development systemlink 백남석; Baek, Nam-Suk; et al, 한국과학기술원, 1985 |
16965 | 마이크로 프로세서를 사용한 자동 선로 측정기 = Automatic telephone line testing system using micro-processorlink 이민화; Lee, Min-Hwa; et al, 한국과학기술원, 1978 |
16966 | 마이크로 프로세서를 위한 BIST 회로의 설계 = Design of BIST circuits for microprocessorslink 조장호; Cho, Jang-Ho; et al, 한국과학기술원, 1993 |
16967 | 마이크로 프로세서를 이용한 PWM 직류 서보 모터 속도 제어 장치에 관한 연구 = A study on a microprocessor-based PWM DC servo motor velocity controllerlink 김형일; Kim, Hyeong-Il; 김충기; 변증남; et al, 한국과학기술원, 1983 |
16968 | 마이크로 프로세서를 이용한 교시형 산업용 로봇트의 제어장치에 관한연구 = uP based control system for playback type industrial robotlink 김승필; Kim, Seung-Pil; et al, 한국과학기술원, 1980 |
16969 | 마이크로 프로세서를 이용한 스텝모터의 고속 정밀 제어에 관한 연구 = A study on high speed and high precision control of step motor using microprocessorlink 김창균; Kim, Chang-Gyun; et al, 한국과학기술원, 1986 |
16970 | 마이크로 프로세서를 이용한 유동 표적 자동 추적 장치 = Automatic moving target tracking system using microprocessorlink 권우현; Kwon, Wu-Hyen; et al, 한국과학기술원, 1979 |
16971 | 마이크로 프로세서를 이용한 전자석 감쇄기의 제작 = Design and manufacture of a micro-processor aided electro-magnetic servo damperlink 이기영; Lee, Ki-Young; et al, 한국과학기술원, 1982 |
16972 | 마이크로 프로세서를 이용한 펄스폭 변조 방식 인버터의 제어 = A microprocessor based design of PWM inverterlink 김항준; Kim, Hang-Joon; et al, 한국과학기술원, 1979 |