Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 21661 to 21720 of 23227

21661
충격파 터널에서의 다중 온도 기반 유동 해석 = Multi-temperature based flow analysis of a shock tunnellink

이상훈; 박기수; et al, 한국과학기술원, 2017

21662
충격파 터널을 이용한 에틸렌 연료 모델 스크램제트의 연소 특성 연구 = Combustion characteristics of ethylene-fueled model scramjet in a shock tunnellink

김근영; 박기수; et al, 한국과학기술원, 2019

21663
충격파관에서의 극초음속 정체 유동 특성 연구 = Study of hypersonic stagnation flow in a shock tubelink

심한슬; 박기수; et al, 한국과학기술원, 2018

21664
충격파에 의해 폭발물에 일어나는 화학반응 진행모델 = Modeling of reaction buildup process in shocked porous explosiveslink

손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1985

21665
충격피로하중이 복합하중으로 작용할 경우 평판에서의 균열 진전거동 = Crack propagation in plates under mixed-mode impact fatigue loadinglink

노승일; Noh, Seung-Il; et al, 한국과학기술원, 1993

21666
충격하중을 받는 연성 재료의 파괴 인성치 측정에 관한 연구 = A study on the fracture toughness of ductile material under impact loadinglink

이원호; Lee, Won-Ho; 엄윤용; 송지호; et al, 한국과학기술원, 1986

21667
충격하중을 받는 판형 콘크리트 구조물의 Mesh 의존성 = Mesh dependency in the analysis of a concrete plate structure under impact loadinglink

강한글; Gang, Han-Gul; et al, 한국과학기술원, 2013

21668
충돌 모델로 충격량을 이용한 가상 휴보 플랫폼의 개발 = Development of virtual Hubo platform using impulse as collision modellink

김인혁; Kim, In-Hyeok; et al, 한국과학기술원, 2006

21669
충돌 시뮬레이션을 이용한 에어백 시스템의 최적설계 = An optimum design of airbag system based on crash simulationlink

전상기; Jeon, Sang-Ki; et al, 한국과학기술원, 1996

21670
충돌 예측 정보를 반영한 에어백 전개 알고리즘 설계 = Design of an airbag deployment algorithm based on pre-crash informationlink

조광현; Cho, Kwang-Hyun; et al, 한국과학기술원, 2010

21671
충돌성능 향상을 위한 알루미늄 크래쉬 박스의 단면 형상 설계 = Cross-section shape design of an aluminum crash box for crashworthiness enhancementlink

이경호; Lee, Gyoung-Ho; et al, 한국과학기술원, 2007

21672
충돌제트 유동에 영향을 받는 Plate-fin heat sink 와 Pin-fin heat sink 의 열 성능에 대한 실험적 연구 = Experimental study on the thermal performance of plate-fin and pin-fin heat sinks with impinging flowlink

배진권; Bae, Jin-Kwon; et al, 한국과학기술원, 2007

21673
충돌제트에서의 열전달 현상에 관한 수치적 연구 = A numerical study for the heat-transfer phenomena in an impinging jet flowlink

이경원; Lee, Kyung-Won; et al, 한국과학기술원, 2002

21674
충상이중수산화물에 의한 인 제거 영향인자 연구 = Phosphorous removal by layered double hydroxidelink

김미주; Kim, Mi-Joo; et al, 한국과학기술원, 1995

21675
충전 흡착탑의 모델링과 동적 모사 = Dynamic modeling and simulation of packed adsorption columnlink

장민호; Chang, Min-Ho; et al, 한국과학기술원, 1998

21676
충전물의 형태와 재질이 충전탑 효율에 미치는 영향 = Effect of shape and wettability of packing materials on the efficiency of a packed columnlink

한명완; Han, Myung-Wan; et al, 한국과학기술원, 1984

21677
충전식 회전 원반 반응기에 의한 포도당 산화 효소 반응 = Ratating packed disk reactor filled with immobilized glucose oxidaselink

주인성; Joo, In-Seong; et al, 한국과학기술원, 1983

21678
충전식 회전 원반 반응기의 동특성 및 Modeling = Dynamic characteristics and modeling of rotating packed disk reactorlink

한재성; Han, Jae-Sung; et al, 한국과학기술원, 1985

21679
충전식 회전원반 반응 기내에서 아세톤 처리된 Humicola spp. 에 의한 리파마이신 S 의 생산 = Biological production of rifamycin S by acetone treated humicola spp. in a rotating packed disk reactorlink

정봉현; Chung, Bong-Hyun; et al, 한국과학기술원, 1984

21680
충전탑 내에서의 액체 분포 = Liquid distribution in packed columnlink

김태경; Kim, Tae-Gyung; et al, 한국과학기술원, 1985

21681
충전탑과 확산증류를 이용한 에탄올-물 분리 = The separation of ethanol-water mixture using the packed column and the diffusion distillationlink

김성철; Kim, Seong-Cheol; et al, 한국과학기술원, 1994

21682
충전탑내에서의 액체의 축방향 혼합 = Axial mixing of liquid in a packed columnlink

이귀호; Lee, Kwi-Hoh; et al, 한국과학기술원, 1984

21683
충전탑에서의 유효물질전달 면적과 액측 물질전달 계수 = Effective interfacial area and liquid-side mass transfer coefficient in packed columnslink

김영한; Kim, Young-Han; et al, 한국과학기술원, 1980

21684
충전탑의 모식화와 형상인자의 결정 = Modelling of packed column and determination of shape factor of packing materiallink

이철호; Lee, Choul-Ho; et al, 한국과학기술원, 1978

21685
충진탑에서의 표면갱신율과 충진물의 유효물질전달면적 = Fractional rate of surface renewal and the effective interfacial area of packing materials in a packed columnlink

이봉희; Lee, Bong-Hee; et al, 한국과학기술원, 1979

21686
취성재료의 연성연삭가공 = Ductile regime grinding of brittle materialslink

윤동선; Yoon, Dong-Seon; et al, 한국과학기술원, 1991

21687
취약점 점수 기반 향상된 침입 감내 시스템 = SEITS: secure enhanced intrusion tolerant system based on vulnerability scorelink

김희영; Kim, Hee-Young; et al, 한국과학기술원, 2013

21688
취화수소의 Chlorotrifluoroethylene 에의 광화학적 첨가반응 = Photochemical addition of hydrogen bromide to chlorotrifluoroethylenelink

박태진; Park, Tae-Jin; et al, 한국과학기술원, 1977

21689
측대역 전치필터쌍을 이용한 VDSL 시스템을 위한 심볼 타이밍 복구 알고리즘에 관한 연구 = Symbol timing recovery using single side prefilter pair for VDSL systemlink

김기현; Kim, Key-Hyun; et al, 한국과학기술원, 1998

21690
측면 공기 유입이 있는 액적 분무 연소기에 관한 수치적 해석 = A numerical study of an axisymmetric side-inlet spary combustorlink

박병용; Park, Byeung-Yong; et al, 한국과학기술원, 1992

21691
측면 완충 영역을 갖는 $LiNbO_3$ 자기정렬 리지 광도파로의 제작 = Fabrication of $LiNbO_3$ self-aligned ridge waveguide with side bufferlink

조영보; Cho, Young-Bo; et al, 한국과학기술원, 2003

21692
측면 장주기 격자를 이용한 실리콘 광도파로 편광 분리기 = Silicon-waveguide polarization splitter using sidewall long period gratingslink

오경진; Oh, Gyong-JIn; et al, 한국과학기술원, 2007

21693
측면 제트 유동에서 난류 모델 개선에 관한 수치적 연구 = Numerical study on improving turbulence Model in the supersonic side-jet injection flowlink

최미진; Choi, Mi-Jin; et al, 한국과학기술원, 2004

21694
측면 홈을 판 CT 시편을 이용한 J-저항 곡선결정 = Determination of J-resistance curves using side-grooved CT specimenslink

허건수; Huh, Kun-Soo; et al, 한국과학기술원, 1984

21695
측면에 단일 기관을 가지는 이차원 관로에서의 층류 유동 가시화 = Flow visualization of two dimensional laminar recirculating flow in a T-type extractor of a ductlink

최진희; Choi, Jin-Hee; et al, 한국과학기술원, 1981

21696
측정된 주파수 응답함수 합성을 이용한 구조물 동특성 변경 매트랩 툴박스 설계 = Design of an SDM toolbox for matlab based on synthesis of measured FRFlink

박종연; Park, Jong-Youn; 박윤식; 박영진; et al, 한국과학기술원, 2005

21697
측정시스템을 이용한 풍력 터빈 프레임 구조물의 해석 하중 도출 및 적용 = Load deduction and application of finite element analysis for wind turbine frame structure using measurement systemlink

강상규; Kang, Sang-Kyu; et al, 한국과학기술원, 2013

21698
측정시스템의 전달특성을 고려한 개선된 수동형 자동초점법 = An improved passive autofocusing algorithm considering transfer characteristtics of measurement systemslink

김기홍; Kim, Ki-Hong; et al, 한국과학기술원, 1996

21699
측정위치가 제한을 받는 경우 가상 요소를 이용한 시스템 규명 = System identification by using virtual elements when a structure has measurement limitationlink

김태현; Kim, Tae-Hyun; et al, 한국과학기술원, 2002

21700
층간 전단 하중을 받는 복합적 층판의 균열에 대한 간헐적인 층간결합의 영향 = Effects of intermittent interlaminar bonding on the cracked composite laminate under interlaminar shear loadinglink

유동희; Yoo, Dong-Hee; et al, 한국과학기술원, 1984

21701
층간소음 저감을 위한 음파 변조에 대한 수치적, 실험적 연구 = Numerical and experimental studies of noise modulation for floor impact sound reductionlink

양승진; Yang SeungJin; et al, 한국과학기술원, 2015

21702
층류 동축분류의 수소확산화염 구조에 관한 수치적 연구 = A numerical study on the structure of laminar coflowing $H_2$ diffusion jet flamelink

김충공; Kim, Chung-Gong; et al, 한국과학기술원, 1992

21703
층류 맥동류에서의 분산특성에 대한 실험적 연구 = Binary mixing characteristics in the axially pulsating flowlink

박부민; Park, Poo-Min; et al, 한국과학기술원, 1993

21704
층류 박리 기포에 관한 수치적 연구 = A numerical study of laminar separation bubblelink

조인현; Cho, In-Hyun; et al, 한국과학기술원, 1988

21705
층류 원통 이상 유동에서 복사 효과를 갖는 고 흡수, 방사 입자의 열확산에 대한 실험적 연구 = Experimental study on thermophoresis of highly absorbing, emitting particles with radiation effect in laminar tube two phase flowlink

강태원; Kang, Tae-Won; et al, 한국과학기술원, 1990

21706
층류 화염에서의 중간생성물 ($C_2$,CH,OH Radicals) 측정 = Measurement of $C_2$,CH,OH radicals in the propane-air laminar flamelink

이우진; Lee, Woo-Jin; et al, 한국과학기술원, 1995

21707
층별 변위장 이론을 이용한 복합재료 원뿔형 쉘 구조물의 열 좌굴 후 거동 해석 = Thermal postbuckling characteristics of composite conical shell structures using layerwise theorylink

우지혜; Woo, Ji-Hye; et al, 한국과학기술원, 2008

21708
층화 샘플링을 이용한 결정 트리의 효율적인 구성 방법 = Enfficient construction of decision trees using stratified samplinglink

정문영; Chung, Moon-Young; et al, 한국과학기술원, 2001

21709
치료 승마의 주기적, 비주기적 궤적 모델링 및 승마 시뮬레이터 적용 = Modeling a periodic and aperiodic trajectory of hippotherapy and application to horseback riding simulatorlink

임찬순; Lim, Chan Soon; et al, 한국과학기술원, 2015

21710
치환간의 종속관계를 이용한 단형 타입의 점진적인 유추 = An incremental monomorphic type inference using a dependency relation on substitutionslink

문부기; Moon, Boo-Gi; et al, 한국과학기술원, 2000

21711
친밀도 기반 로봇 인사 제스처 다양화를 위한 Primitive Motion의 조합 방법 = Combination method of primitive motion for various intimacy based robot greeting gesture generationlink

서주환; Seo, Ju-Hwan; et al, 한국과학기술원, 2014

21712
친밀한 관계의 사람 간 대립적 인터랙션의 계산 모델 = Computational model of conflictual interactions between people in close relationshiplink

이창훈; Lee, Changhun; et al, 한국과학기술원, 2015

21713
친수성 폴리우레탄-소수성 폴리스티렌 IPN의 혈액적합성에 관한 연구 = Blood compatibility of hydrophilic PU and hydrophobic PS IPNslink

노향우; Roh, Hyang-Woo; et al, 한국과학기술원, 1995

21714
친수성과 내마모성을 가지는 유-무기 하이브리드 코팅 물질의 제조 및 특성 = Synthesis and characterization of organic-inorganic hybrid coating materials having hydrophilic property and abrasion resistnacelink

차준규; Cha, Jun-Kyu; et al, 한국과학기술원, 2000

21715
친환경 단일추진제 촉매분해 모델링을 이용한 추력기 촉매대 설계 최적화 = Design optimization of green monopropellant thruster catalyst beds using catalytic decomposition modelinglink

정상우; 권세진; et al, 한국과학기술원, 2017

21716
친환경 절삭을 위한 정전 분무 윤활에 관한 연구 = A study on electrostatic spray lubrication for eco-friendly cuttinglink

신광섭; Shin, Kwang-Sup; et al, 한국과학기술원, 2008

21717
친환경을 고려한 롤클리너 개발: 3R을 중심으로 = Development of a lint roller considering environment-friendly: focusing on 3Rlink

김재홍; 배상민; et al, 한국과학기술원, 2023

21718
친환경적 사용을 유도하는 제품 디자인 방법에 관한 연구 : 행동유도성 및 무의식적 행동의 적용을 중심으로 = A study on product design method deriving proenvironmental use : focused on applying affordance and thoughtless actlink

손민정; Sohn, Min-Jung; 이우훈; Lee, Woo-Hun; et al, 한국과학기술원, 2008

21719
침생검 시뮬레이터를 위한 햅틱 볼륨 렌더링 = Haptic volume rendering for a needle biopsy simulatorlink

경기욱; Kyung, Ki-Uk; et al, 한국과학기술원, 2001

21720
침유 소폭 저어널 베어링에서의 유막파단에 관한 연구 = A study on rupture of lubricating film in short journal bearings under the submerged operationlink

김현민; Kim, Hyeun-Min; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0