20761 | 절삭공구의 피복층이 공구마멸에 미치는 영향에 대한연구 = Study on effects of coatings on cutting tool wearlink 손태영; Shon, Tae-Young; et al, 한국과학기술원, 1989 |
20762 | 절삭력의 주파수 해석 및 시뮬레이션에 의한 고정도표면 생성 예측에 관한 연구 = A study on the frequency analysis of cutting force and prediction on high accuracy surface generation by simulationlink 이은복; Lee, Eun-Bok; et al, 한국과학기술원, 1993 |
20763 | 절삭율-공구 수명 곡선을 이용한 절삭 조건 최적화 = Optimization of cutting conditions using cutting rate-tool life(R-T) curveslink 박화영; Park, Hwa-Young; et al, 한국과학기술원, 1985 |
20764 | 절연 기판 위에 형성한 다결정 실리콘 박막 트랜지스터의 수명 예측 = Lifetime estimation of polycrystalline silicon thin film transistors on insulating substrateslink 양은진; Yang, Eun-Jin; 한철희; 김충기; et al, 한국과학기술원, 2000 |
20765 | 절연 둑을 이용한 박막 태양전지의 집적화 기술 개발 = Development of thin film solar cell integration technology using insulating bankslink 김성훈; Kim, Sung-Hoon; et al, 한국과학기술원, 2008 |
20766 | 절연부 회전 강성 변경을 통한 고주파수 대역 진동파워 저감에 관한 연구 = A study on reduction of vibration power transmission in high frequency range by modifying rotational stiffness of isolatorslink 김진성; Kim, Jin-Sung; et al, 한국과학기술원, 2003 |
20767 | 절연성 나노유체의 대류 열전달 성능 검증 및 고찰 = Investigation of convection heat transfer performance of dielectric nanofluidlink 정문경; 이봉재; et al, 한국과학기술원, 2017 |
20768 | 절점 변위를 이용한 응력 회복과 적응적 격자망 세밀화에의 응용 = Stress recovery using nodal displacements and its application to adaptive mesh refinementlink 김현우; Kim, Hyun-Woo; et al, 한국과학기술원, 2009 |
20769 | 절점및 요소 근접도에 근거한 유한 요소 모델의 효율적인 절점 번호 부여 방법 개발 = Development of an efficient numbering algorithm for the finite element models based on the adjacency of nodes and elementslink 구본웅; Koo, Bon-Ung; et al, 한국과학기술원, 1990 |
20770 | 절점병합에 의한 면내 회전자유도를 갖는 삼각형 평면응력요소의 개발 = Development of triangular membrane element with drilling degree-of-freedom by combined nodelink 오세택; Oh, Se-Taek; et al, 한국과학기술원, 2002 |
20771 | 젊은 성인 남자들의 키와 발부피의 일변화에 관한 연구 = Circadian changes of human stature and foot volume for young adult menlink 나건; Nah, Gun; et al, 한국과학기술원, 1985 |
20772 | 점성경계를 이용한 지반-구조물의 상호작용에 관한 연구 = Soil-structure interactions using viscous boundarylink 이상목; Lee, Sang-Mok; et al, 한국과학기술원, 1986 |
20773 | 점성력 및 수력을 이용한 유체 봉입형 엔진 마운트의 모형화 및 해석 = Modeling and analysis of visco-hydraulic engine mountlink 김하용; Kim, Ha-Yong; et al, 한국과학기술원, 1998 |
20774 | 점성토의 시간의존 거동 = Time-dependent behaviour of cohesive soilslink 김태형; Kim, Tae-Hyeong; et al, 한국과학기술원, 1993 |
20775 | 점소성 재료에 대한 동적 유한요소 해석 = Dynamic finite element analysis for viscoplastic materialslink 김종훈; Kim, Jong-Hoon; et al, 한국과학기술원, 1992 |
20776 | 점용접 너겟부의 변형률속도에 따른 인장 물성에 관한 연구 = Tensile properties of nugget region in a spot weld at various strain-rateslink 박문수; Park, Moon-Su; et al, 한국과학기술원, 2014 |
20777 | 점용접 모자형 사각관의 충돌성능에 대한 신뢰도 기반 최적설계 = Reliability based design optimization for crashworthiness of a spot welded hat type memberlink 김유종; Kim, Yu-Jong; et al, 한국과학기술원, 2009 |
20778 | 점용접 열영향부의 동적 물성특성에 관한 연구 = Dynamic material properties of the heat-affected zone (HAZ) in a resistance spot weldlink 하지웅; Ha, Jiwoong; et al, 한국과학기술원, 2008 |
20779 | 점용접부 피로 해석을 위한 유한 요소 모델링 기법 = Finite element modeling for the spot welding fatigue assessmentlink 변형배; Byun, Hyung-Bai; et al, 한국과학기술원, 2004 |
20780 | 점적상에서의 동적 액체 체유량 = Dynamic liquid holdup of a trickle bedlink 이종원; Lee, Jong-Won; et al, 한국과학기술원, 1980 |
20781 | 점적상에서의 동적 액체 체유량과 외부 접촉 효율 = Dynamic liquid holdup and external contacting efficiency of a trickle bedlink 이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 1985 |
20782 | 점진적 구조 최적화 기법을 이용한 스트럿 타이 모델의 결정 = Determination of strut-tie model using evolutionary structural optimizationlink 노상훈; Noh, Sang-Hoon; et al, 한국과학기술원, 2002 |
20783 | 점진적 구조 최적화 기법을 이용한 철근 콘크리트 구조물의 전단 해석 = Shear analysis of reinforced concrete structure using evolutionary structural optimizationlink 양규영; Yang, Kyu-Young; et al, 한국과학기술원, 2011 |
20784 | 점진적 자료 흐름 그래프를 이용한 효율적인 상수 전달 기법 = A method for efficient constant propagation using incremental data-flow graphlink 허재원; Her, Jae-Won; et al, 한국과학기술원, 1996 |
20785 | 점탄성 감쇠층이 내삽된 원통형 복합 적층 패널의 동특성 연구 = Dynamic characteristics of cylindrical composite panels with embedded and constrained viscoelastic layerslink 신원호; Shin, Won-Ho; et al, 한국과학기술원, 2002 |
20786 | 점탄성 기둥과 긴장재를 이용한 교량의 진동제어 = Vibration control of bridges using visco-elastic post and tendonlink 하준식; Ha, Jun-Sik; et al, 한국과학기술원, 2003 |
20787 | 점탄성 댐퍼를 이용한 산업용 로보트의 잔류 진동 감쇠에 관한 연구 = Suppression of residual vibrations in an industrial robot using a viscoelastic damperlink 민창식; Min, Chang-Shik; et al, 한국과학기술원, 1990 |
20788 | 점탄성 방진재를 이용한 궤도계의 진동특성 해석 = Analaysis of vibration characteristics of rail track system with viscoelastic vibration isolation materialslink 이정학; Lee, Joung-Hak; et al, 한국과학기술원, 1994 |
20789 | 점탄성 연마재에 의한 난삭재의 경면가공에 관한 연구 = A study on the mirror-like surface machining of difficult-to-cut materials by nonwoven abrasive padslink 서언맹; Xu, Yan-Meng; et al, 한국과학기술원, 1998 |
20790 | 점탄성 재료를 이용한 제어 모멘트 자이로 용 진동절연에 관한 연구 = (A) study on vibration isolation for control moment gyroscope using viscoelastic materiallink 윤도희; 한재흥; et al, 한국과학기술원, 2019 |
20791 | 점탄성 진동 흡수기를 이용한 공작기계의 동특성 개선 = Improvement of machine tool dynamic characteristics using viscoelastic vibration absorborlink 하재용; Ha, Jae-Yong; et al, 한국과학기술원, 1985 |
20792 | 점탄성 효과를 고려한 자동차 부싱의 위상 및 형상 최적설계에 관한 연구 = A study on the topology and shape optimization of vehicle bushings considering viscoelasticitylink 허성재; Heo, Sung Jae; et al, 한국과학기술원, 2015 |
20793 | 점탄성재질로 코팅된 부정정 외팔보계의 동적 해석 = Dynamic analysis of an indeterminate system with cantilevers coated with viscoelastic materiallink 심송; Sim, Song; et al, 한국과학기술원, 1987 |
20794 | 접근 지향 프로그래밍을 위한 Smalltalk 의 확장과 가상 머신의 설계 및 구현 = Design and implementation of the extended smalltalk virtual machine for access-oriented programminglink 김병호; Kim, Byung-Ho; et al, 한국과학기술원, 1992 |
20795 | 접속정보를 이용한 한글 철자 및 띄어쓰기 검사기의 설계 및 구현 = A design and implementation of hangul spelling and word-spacing checker using connectivity informationlink 강재우; Kang, Jae-Woo; et al, 한국과학기술원, 1990 |
20796 | 접착 길이와 하중 형태가 표면 부착된 광섬유 브래그 격자 센서의 변형률 전달률에 미치는 영향에 관한 연구 = Effect of the bonding length and load type on the strain transfer rate of the surface bonded fiber bragg grating sensorlink 권현석; 김천곤; et al, 한국과학기술원, 2017 |
20797 | 접착제로 접합된 복합재료 구동축의 토오크 전달특성에 관한 연구 = A study on the torque transmission characteristics of adhesively bonded composite drive shaftslink 김원태; Kim, Won-Tae; et al, 한국과학기술원, 1993 |
20798 | 접착조인트의 극저온 파괴인성 향상에 관한 연구 = A study on the improvement of fracture toughness of adhesive joints at cryogenic temperatureslink 윤순호; Yoon, Soon-Ho; et al, 한국과학기술원, 2009 |
20799 | 접촉 역학적 접근에 의한 점탄성/탄성, 점탄성/점탄성 재료간의 접합 에너지 측정 = A measurement of adhesion energy between viscoelastic/elastic, viscoelastic/viscoelastic materials using contact mechanics approachlink 이찬; Lee, Chan; et al, 한국과학기술원, 2003 |
20800 | 접촉력에 의한 대인 지뢰의 탐지 = Anti-personnel mine detection by contact forcelink 윤석준; Yoon, Suk-June; et al, 한국과학기술원, 2001 |
20801 | 접촉매질을 이용한 연속회분식공정의 효율개선 = Enhancement of performance efficiency of SBR using medialink 박명균; Park, Myung-Gyun; et al, 한국과학기술원, 1990 |
20802 | 접촉문제를 고려한 탄소/탄소 브레이크 디스크의 3차원 파손해석 및 설계 = 3 dimensional failure analysis and design of carbon/carbon brake disk considering contact problemlink 오세희; O, Se-Hee; et al, 한국과학기술원, 2000 |
20803 | 접촉응력해석을 통한 핵연료 지지격자 구조물의 최적설계 = Optimal design of a nuclear fuel rod support structure based on contact stress analysislink 장인권; Jang, In-Gwun; et al, 한국과학기술원, 1999 |
20804 | 접합부 변형을 고려한 파이프 설비의 효율적인 해석 = Efficient analysis of piping systems with joint deformationlink 안경철; An, Gyeong-Cheol; et al, 한국과학기술원, 1989 |
20805 | 접합부의 비선형 변형을 고려한 대형판 조립식 구조물의지진해석 = Seismic analysis of large panel precast concrete structures with nonlinear joint deformationlink 황재호; Hwang, Jae-Ho; et al, 한국과학기술원, 1994 |
20806 | 정귀환 자가보정 회로를 이용한 초고입력 임피던스 아날로그 프론트엔드 = (An) ultra-high input impedance analog front-end using self-calibrated positive feedback techniquelink 이진석; 조성환; et al, 한국과학기술원, 2017 |
20807 | 정규화된 가우시안 네트워크 기법을 이용한 광소자 역설계 = Inverse design of photonic devices using normalized Gaussian network methodlink 이경민; 민범기; et al, 한국과학기술원, 2021 |
20808 | 정기 검사 정책 하에서의 마모량 기준 대체 모형 = A preventive maintenance model based on the wear level under periodic inspection policylink 김재원; Kim, Jae-Won; et al, 한국과학기술원, 1986 |
20809 | 정기적으로 검사되는 시스템에 대한 예방교체 정책 = Preventive replacement policies for a periodically inspected systemlink 이해각; Lee, Hae-Kag; et al, 한국과학기술원, 1987 |
20810 | 정렬되지 않은 메모리 접근을 통한 메모리 프로파일링 기법 = AF-Map : Alignment-fault based event-driven memory access profilerlink 박민준; 강병훈; et al, 한국과학기술원, 2018 |
20811 | 정렬을 통한 다단계 변환패턴의 자동 구축 = Auto-construction of multi-stage transfer pattern through alignmentlink 황금하; Huang, Jin-Xia; et al, 한국과학기술원, 2000 |
20812 | 정리 증명의 추론 규칙을 이용한 지식 베이스의 중복성 제거와 일치성 검사 = Redundancy removing and consistency checking of a knowledge base using a theorem proving inference rulelink 강현규; Kang, Hyun-Kyu; 김진형; 임영환; et al, 한국과학기술원, 1987 |
20813 | 정밀 3차원 복원을 위한 구조광 기반 스테레오 카메라 시스템 = Structured light-based stereo camera system for accurate 3D reconstructionlink 하효원; Ha, Hyo-Won; et al, 한국과학기술원, 2012 |
20814 | 정밀 삼차원 측정을 위한 백색광 간섭 광학 프로브 개발 = Optical probe of white light interferometry for precision coordinate metrologylink 진종한; Jin, Jong-Han; et al, 한국과학기술원, 2002 |
20815 | 정밀 선형 위치 결정 기구의 설계 및 해석 = A design and analysis of precise linear positioning mechanismlink 김상채; Kim, Sang-Chae; et al, 한국과학기술원, 1995 |
20816 | 정밀 위치 제어를 위한 이득 선정에 관한 연구 = A study on the gain tuning for precise position controllink 김민수; Kim, Min-Su; et al, 한국과학기술원, 2004 |
20817 | 정밀 위치 제어를 위한 제어기에 관한 연구 = A study on controller for precision position controllink 박찬우; Park, Chan-Woo; et al, 한국과학기술원, 2006 |
20818 | 정밀가공기 진단을 위한 표면형상측정 및 분석 = Surface measurement and analysis for machine diagnosislink 조경일; Cho, Gyoung-Il; et al, 한국과학기술원, 1997 |
20819 | 정밀한 BGR과 정전용량 센서를 이용한 집적화된 Label-Free DNA 센서 칩 설계 = Design of fully integrated label-free DNA sensor chip using capacitive sensor with precise band-gap referencelink 이병훈; Lee, Byung-Hun; et al, 한국과학기술원, 2010 |
20820 | 정밀한 영전류 센서를 이용한 두 가지 구동 모드로 동작하는 스위칭 직류-직류 변환기 = Hybrid-mode switching DC-DC converter with accurate zero current sensorlink 송대기; Song, Dae-Gee; et al, 한국과학기술원, 2012 |