Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 21601 to 21620 of 23237

21601
최적화된 Layout 설계를 이용한 InP 기반 RTD/HBT 기술의 성능 향상 = Performance Improvement of InP-based RTD/HBT Technology using Optimized Geometrical Layout Designlink

이종원; Lee, Jong-Won; et al, 한국과학기술원, 2008

21602
최적화된 Zn Diffusion 과 p-type Ohmic Contact 공정을 이용한 광통신용 Planar-type InGaAs/InP Avalanche Photodiode 의 제작 및 특성 분석 = Fabrication and Characterization of Planar-type InGaAs/InP Avalanche Photodiodes using Optimized Zn Diffusion and p-type Ohmic Contact for Optical Communicationslink

김철규; Kim, Cheol-Gyu; et al, 한국과학기술원, 2011

21603
최적화된 집적 유한 차분 수치기법을 위한 예조건화와 난류모델에 대한 연구 = A study on preconditioning matrix and turbulent model for optimized compact schemelink

허대녕; Heo, Dae-Nyoung; et al, 한국과학기술원, 1999

21604
최적화된 집적 유한 차분 수치기법을 이용한 초음속 제트의 Screech Tone 해석 = An analysis of screech tone noise from supersonic jet using optimized compact schemelink

이인철; Lee, In-Cheol; et al, 한국과학기술원, 2003

21605
최적화된 집적 유한 차분법을 이용한 항공기 팬 소음의 근거리 방사 연구 = A numerical study on the sound radiation from aircraft engine inlet using optimized compact schemelink

심인보; Shim, In-Bo; et al, 한국과학기술원, 1998

21606
최적화된 집적 유한차분법을 위한 내재적 시간전진 기법의 특성 연구 = A study on characteristics of implicit optimized compact schemelink

박노성; Park, No-Sung; et al, 한국과학기술원, 1999

21607
최적화된 집적유한차분을 이용한 고차의 정확도와 고해상도를 갖는 유한 체적법의 연구 = A study on optimized compact finite volume schemelink

김용제; Kim, Yong-Jea; et al, 한국과학기술원, 2001

21608
쵸퍼 구동기를 이용한 스텝 모터의 고속정밀제어에 관한 연구 = A study on high speed and high accuracy control of step motor using Chopper driverlink

오동성; Oh, Dong-Seong; et al, 한국과학기술원, 1987

21609
추가 변형률 요소를 이용한 열 응력 해석에 관한 연구 = A study on thermal stress analysis using enhanced assumed strain elementslink

고진환; Ko, Jin-Hwan; et al, 한국과학기술원, 1997

21610
추가 절점자유도를 가지는 Cosserat 연속체역학 기반 평면 사각요소 개발 = Development of cosserat plane quadrilateral elements with addtional degrees of freedomlink

이동기; Lee, Dong-Gi; et al, 한국과학기술원, 2014

21611
추계론적 유한요소법을 이용한 지반의 부등침하 해석 = Stochastic numerical analysis of differential settlementlink

이형주; Lee, Hyung-Joo; et al, 한국과학기술원, 1988

21612
추돌 회피를 위한 도로 주행 차량의 종방향 제어기에 관한 연구 = A study on the longitudinal controller of road-vehicle for rear-end collision avoidancelink

김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1999

21613
추론 모형에 기초한 믿음과 지식의 증명 방법에 관한 연구 = A proof mechanism for knowledge and belief based on deduction modellink

김영훈; Kim, Young-Hoon; et al, 한국과학기술원, 1988

21614
추론된 모델 기반 커널 퍼즈 테스팅 = Inferred model-based kernel fuzz testinglink

한형석; 차상길; et al, 한국과학기술원, 2018

21615
추상적 데이타 형의 중복을 허용하는 중포 트랜잭션을 위한 동시성 제어 = Concurrency control for a nested transaction model allowing replicated abstract data typeslink

조행래; Cho, Haeng-Lae; et al, 한국과학기술원, 1990

21616
추적 레이더를 위한 목표물 검파기의 구현에 관한 연구 = Implementation of a target detector for the tracking radar systemlink

이동섭; Lee, Dong-Seop; et al, 한국과학기술원, 1998

21617
추적식 3차원 형상 측정을 위한 광학식 변위센서 = A study on the optical displacement sensor for a three dimensional surface profile measurement by a tracking methodlink

이재윤; Lee, Jae-Yun; et al, 한국과학기술원, 1991

21618
추진제 농도의 과산화수소 증류 조건 확립 및 성능 평가 = Distillation of rocket grade hydrogen peroxide and performance evaluation of distilled hydrogen peroxidelink

정승미; Chung, Seung-Mi; et al, 한국과학기술원, 2010

21619
추천 시스템에서 온톨로지를 이용한 퍼지 척도 기반의 협업 필터링 기법 = Fuzzy measure based-collaborative filtering using ontology in personalized recommender systemlink

심지현; Shim, Ji-hyun; et al, 한국과학기술원, 2008

21620
축 대칭 Hydroforming 공정에 의한 유한 요소 해석 = Finite element analysis of the axisymmetric hydroforming processlink

최선준; Choi, Sun-Jun; et al, 한국과학기술원, 1984

rss_1.0 rss_2.0 atom_1.0