1501 | 구조물에 작용되는 충격력 및 이에 의한 동적응력 해석에 관한 연구 = A study on the analysis of impact force and dynamic stress of a structure caused by an airborne impactlink 김대환; Kim, Dae-Whan; et al, 한국과학기술원, 1986 |
1502 | 구조물의 건전성 평가를 위한 피로 수명 예측 절차에 관한 연구 = Development of fatigue life predicition procedures for structural integrity assessmentlink 하재선; Ha, Jae-Sun; et al, 한국과학기술원, 1987 |
1503 | 구조물의 건전성 평가를 위한 피로균열진전 수명예측에 관한 연구 = Study on fatigue crack propagation life prediction for structural integrity assessmentlink 이시중; Lee, Sih-Joong; et al, 한국과학기술원, 1988 |
1504 | 구조물의 고유 해에 대한 최적설계 모델 = Optimization for structural eigensolution problemslink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 1980 |
1505 | 구조물의 진동 제어를 위한 전자석 구동기 설계 및 응용 = Design of electromagnetic actuator for vibration control of structures and its applicationslink 박만복; Park, Man-Bok; et al, 한국과학기술원, 2002 |
1506 | 구조물의 토폴로지 최적화를 위한 재료 분배 문제에 관한 연구 = A study on the material distribution problem for the topology optimization of structureslink 박상훈; Park, Sang-Hoon; et al, 한국과학기술원, 1995 |
1507 | 구조의 순차적 근사최적화를 위한 제한조건의 응집에 대한 연구 = (A) study on constraint aggregation for sequential approximate optimization of structureslink 김정환; 이병채; et al, 한국과학기술원, 2020 |
1508 | 구조적 조명을 이용한 3차원 좌표의 자동 입력 및 재구성 = Three-demensional geometric data acquisition and surface reconstruction using a structured light systemlink 주서진; Joo, Seo-Jin; et al, 한국과학기술원, 1990 |
1509 | 구조합성법의 고찰 및 유한 요소 모델과 실험 모델과의 합성에 관한 연구 = A review of mode synthesis techniques and its application between FE and experimental modellink 최재웅; Choi, Jae-Woong; et al, 한국과학기술원, 1988 |
1510 | 구조화된 직선빔을 이용한 고주파 전기 저항 용접 파이프의 비드 형상 측정에 관한 연구 = A bead shape monitoring method for HERW pipe production via structured light beamlink 고국원; Ko, Kuk-Won; et al, 한국과학기술원, 1994 |
1511 | 구형 Cap 의 축상에 놓인 Stokeslet 에 의한 축대칭의 느린 점성 유동 = Axi-symmetric slow viscous flow due to a stokeslet on the axis of a spherical caplink 박경근; Park, Kyoung-Kuhn; et al, 한국과학기술원, 1984 |
1512 | 구형 석출물을 갖는 무한 고체에정수압이 가해지는 경우에 대한 탄성-소성해 = An elasto-plastic solution for infinite solid containing a spherical precipitate under hydrostatic pressurelink 최병익; Choi, Byoung-Ik; et al, 한국과학기술원, 1980 |
1513 | 구형 열원을 갖는 Rijke 관에 관한 수치해석적 연구 = The numerical analysis of the rijke tube with spherical heat sourceslink 김성진; Kim, Sung-Jin; et al, 한국과학기술원, 1985 |
1514 | 구형 투척 로봇의 동적 자세 안정화 = Stabilizing dynamic posture of sphere type throwing robotlink 정원석; Jung, Won-Suk; et al, 한국과학기술원, 2010 |
1515 | 국부 세분화를 고려한 T-스플라인 유한요소해석에 관한 연구 = A study on T-spline finite element analysis with local refinementlink 김기승; Kim, Ki-Seung; et al, 한국과학기술원, 2007 |
1516 | 국부 열유속을 가지는 히트싱크의 열적 성능에 관한 실험적 연구 = Experimental study on the thermal performance of a heat sink subject to a localized heat sourcelink 조일현; Jo, Il-Hyeon; et al, 한국과학기술원, 2005 |
1517 | 국부 주파수 분석에 의한 랜덤한 무늬 영상에서의 영역 판별 = Region identification in random-textured images by local frequency analysislink 김상원; Kim, Sang-Won; et al, 한국과학기술원, 1994 |
1518 | 국부적 대변형이 있는 보구조의 비선형 해석을 위한 스프링요소 자동삽입에 관한 연구 = A study on automatic implementation of spring elements for the nonlinear analysis of frame structures with localized large deformationlink 황은석; Hwang, Eun-Seok; et al, 한국과학기술원, 1990 |
1519 | 국부좌굴을 고려할 수 있는 프레임 구조의 기하학적 비선형 해석 프로그램 개발 = Developement of a program for the analysis of frame structures with geometric nonlinearities, flexible joints and locally buckled areaslink 박문식; Park, Moon-Sick; 이병채; 곽병만; et al, 한국과학기술원, 1989 |
1520 | 국소 가열 방법을 이용한 2 단계 축대칭 디프드로잉 공정의 해석 및 설계 = Finite element analysis and design of axisymmetric deep drawing process by local heatinglink 이동우; Lee, Dong-Woo; et al, 한국과학기술원, 1992 |
1521 | 국소 교란에 의한 난류 박리 및 재 부착 유동의 벽 압력 섭동 변화 = Wall pressure fluctuations of turbulent separated and reattaching flow by local forcinglink 강웅; Kang, Woong; et al, 한국과학기술원, 2004 |
1522 | 국소 교란이 난류 경계층에 미치는 영향 = Effect of local forcing on a turbulent boundary layerlink 박상현; Park, Sang-Hyun; et al, 한국과학기술원, 1999 |
1523 | 국소 열전달 관측을 통한 과냉각 풀비등의 임계 열유속 현상에 대한 정량적 분석 = Quantitative analysis of the critical heat flux in subcooled pool boiling through the observation of local heat transferlink 이혜승; Lee, Hyeseung; et al, 한국과학기술원, 2016 |
1524 | 국소 진동장 형성에 의한 얇은 평판에서의 촉감 구현 = Generation of localized vibration on a thin plate for haptic sensationlink 우정한; Woo, Jung-Han; et al, 한국과학기술원, 2014 |
1525 | 국소교란이 가해지는 난류박리기포의 대형와구조 = Large-scale structure of a leading-edge separation bubble with local forcinglink 김유익; Kim, Yu-Ik; et al, 한국과학기술원, 1995 |
1526 | 굴삭기 붐의 형상 최적화에 관한 연구 = A study on shape optimization of an excavator boomlink 조중찬; Cho, Jung-Chan; et al, 한국과학기술원, 1995 |
1527 | 굴삭기의 유압회로 해석 및 하강주행의 안정성연구 = Hydraulic circuit analysis of an EXCAVATOR and stability study in a declining attitudelink 김철수; Kim, Cheol-Soo; et al, 한국과학기술원, 1980 |
1528 | 굽힘 이력을 고려한 박판성형공정의 유한요소 역해석 = Finite element inverse analysis of the sheet metal forming process considering bending historylink 허지향; Huh, Jee-Hyang; et al, 한국과학기술원, 2007 |
1529 | 굽힘 하중을 받는 딤플형 내부구조 금속 샌드위치 판재의 최적설계 = Optimal design of metallic sandwich plates with inner dimpled shell structure subject to bending momentlink 성대용; Seong, Dae-Yong; et al, 한국과학기술원, 2005 |
1530 | 굽힘과 비틀림의 반복응력이 비위상으로 작용할때 평균 응력의 영향에 관한 실험적 연구 = Experimental study on mean stress effect on out-of-phase bending and torsion fatiguelink 이학주; Lee, Hak-Joo; et al, 한국과학기술원, 1985 |
1531 | 굽힘하중을 받는 표면피로 균열의 닫힘거동에 관한 기초연구 = A fundamental study on closure behavior of surface fatigue cracks under bending loadinglink 나상수; Na, Sang-Soo; et al, 한국과학기술원, 1995 |
1532 | 권선 장력유지기의 동력학 해석 및 최적설계 = Dynamic analysis and optimal design of wire winding tension keeperlink 김학태; Kim, Hak-Tae; et al, 한국과학기술원, 1993 |
1533 | 궤도 차량의 동역학적 해석과 다구찌 방법을 이용한 설계 = Dynamic analysis of tracked vehicle system and parameter design by the taguchi methodlink 김성호; Kim, Seong-Ho; et al, 한국과학기술원, 1993 |
1534 | 궤적 설계를 통한 위상오차보상제어기의 성능 향상에 대한 연구 = Frequency-based zero phase error tracking control with sinusoidal trajectory for improved tracking controllink 서명진; Seo, Myoung-Jin; et al, 한국과학기술원, 2002 |
1535 | 귀높이 스피커를 사용하는 위쪽 반구 3차원 가상 음원 배치에 관한 연구 = Virtual placement of 3D sound source at upper hemisphere using ear-level loudspeakerslink 양훈민; Yang, Hun-Min; 박영진; Park, Young-Jin; et al, 한국과학기술원, 2014 |
1536 | 규격 부재를 사용한 빔-트러스 구조물 최적설계 프로그램 개발 = Development of beam-truss structural optimization program using standard sectionslink 박관진; Park, Kwan-Jin; et al, 한국과학기술원, 1987 |
1537 | 규격부재를 이용한 구조물의 최적설계 = Optimal design of structures with specified member sizeslink 이항섭; Lee, Hang-Seop; et al, 한국과학기술원, 1985 |
1538 | 균열 열림점 실 시간 측정을 통한 일정 $ΔK_{eff}$ 피로 균열 진전 시험 자동화 시스템에 관한 연구 = An automated system for constant $ΔK_{eff}$ fatigue crack growth testing through real-time measurement of crack opening loadlink 신성철; Shin, Sung-Chul; et al, 한국과학기술원, 2001 |
1539 | 균열길이 및 균열열림점하중 실시간 측정을 통한 피로균열진전시험 자동화 = Automation of fatigue crack growth testing through real-time measurements of crack length and crack opening loadlink 김훈; Kim, Hoon; et al, 한국과학기술원, 1997 |
1540 | 균일 전단 유동장내에서 회전하는 원봉 주위의 유동에 대한 실험적 연구 = Experimental study of flow around a rotating circular cylinder in uniform shear flowlink 전종국; Chun, Chong-Kuk; et al, 한국과학기술원, 1993 |
1541 | 균일 전단류에 놓여있는 원형 실린더 후면의 난류 구조 연구 = Study of turbulent structure behind a circular cylinder in a homogeneous uniform shear flowlink 정희택; Cheong, Hee-Taick; et al, 한국과학기술원, 1984 |
1542 | 균일전단류가 2차원 곡률 Duct에 유입될 때의 난류유동 특성에 대한 실험적 연구 = Experimental study on the tubulent characteristics of 2-D curved duct flow with inlet uniform shear ratelink 임효재; Im, Hyo-Jae; et al, 한국과학기술원, 1989 |
1543 | 균일전단류에 잠긴 원통표면의 압력 및 전단력 분포 = Pressure and skin friction distributions around a circular cylinder immersed in a uniform shear flowlink 변철웅; Byun, Cheol-Woong; et al, 한국과학기술원, 1983 |
1544 | 균형질량을 이용한 PUMA-760 로보트의 동적 매개변수 식별(Identification)에 관한 연구 = On the dynamic parameter identification of PUMA-760 robot using balancing masslink 임태균; Lim, Tae-Gyoon; 이종원; 조형석; et al, 한국과학기술원, 1987 |
1545 | 그라비아 인쇄법을 이용한 유연 OLED 소자 제작 = Gravure printed OLED on flexible substratelink 박지훈; Park, Ji-Hoon; et al, 한국과학기술원, 2010 |
1546 | 그래픽스를 이용한 공간기구의 표현 및 해석용 대화식 프로그램의 개발 = Development of a PC-based interactive program for representation and analysis of spatial mechanisms by using computer graphicslink 손희성; Son, Hee-Sung; et al, 한국과학기술원, 1987 |
1547 | 그래픽을 이용한 평면기구의 대화식 설계 프로그램 개발 = Development of an interactive CAD program for planar mechanismslink 정문채; Jung, Mun-Chae; et al, 한국과학기술원, 1986 |
1548 | 그래핀과 탄소나노튜브 결합기에 기반한 단백질 탐지 센서에 대한 연구 = The study of antibody target protein sensor using junction binder of plasmonic welded net structure CNT above graphenelink 김장헌; Kim, Jang Heon; et al, 한국과학기술원, 2016 |
1549 | 그래핀의 젖음 투과성에 대한 이론적 연구 = Theoretical study of wetting transparency of graphene on realistic surfacelink 김동규; Kim, Donggyu; et al, 한국과학기술원, 2016 |
1550 | 그림자식 모아레를 이용한 PWB의 휨 측정에 관한 연구 = A study on the measurement of PWB warpage using shadow moirelink 이성민; Lee, Sung-Min; et al, 한국과학기술원, 2002 |
1551 | 극 미세제트의 유체역학적 안정성 = Hydrodynamic stability of liquid nanojetslink 이윤미; Lee, Yun-Mi; et al, 한국과학기술원, 2004 |
1552 | 극미량 시료분석을 위한 마이크로 분광경로에 대한 연구 = A study on the micro optical path for the analysis of micro-volume sampleslink 이상욱; Lee, Sang-Wook; et al, 한국과학기술원, 2013 |
1553 | 극소 공진형 가속도계의 유체 역학적 감쇠 = Hydrodynamic damping in a resonant micro accelerometerlink 김현민; Kim, Hyun-Min; et al, 한국과학기술원, 1997 |
1554 | 극저온 냉동기를 탑재한 초전도 모터의 개발 = Development of the superconducting motor using on-board cryocoolerlink 김희선; Kim, Hee-Sun; et al, 한국과학기술원, 2010 |
1555 | 극저온 액체 추진제 저장 탱크의 수동형 열역학적 배기 시스템의 개발 = Development of passive thermodynamic vent system (TVS) for cryogenic liquid propellant storage tanklink 배준혁; 정상권; et al, 한국과학기술원, 2018 |
1556 | 극저온 유체 배관냉각특성에 대한 수치해석 및 검증 = Numerical analysis and verification of cryogenic line chill down characteristiclink 변병창; 정상권; et al, 한국과학기술원, 2022 |
1557 | 극저온 유체의 무배기 충진 기술에 대한 연구 = Investigation on no-vent fill of cryogenlink 김영철; Kim, youngcheol; et al, 한국과학기술원, 2015 |
1558 | 극저온 유체의 무배기충진기술의 수치해석 모델에 대한 연구 = Experimental study on numerical model for no-vent filling (NVF) of cryogenlink 김경중; 정상권; et al, 한국과학기술원, 2017 |
1559 | 극저온용 맥동관 팽창기에 대한 수치해석 및 실험적 연구 = Numerical and experimetal study on cryogenic pulse tube expanderlink 박세현; 정상권; et al, 한국과학기술원, 2018 |
1560 | 극한 성능법에 의한 수동 현가 시스템 해석 및 감쇠기 설계 = A passive suspension system analysis and damper design with limiting performance techniquelink 범현균; Beom, Hyen-Gyun; et al, 한국과학기술원, 1990 |