Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Author 1143

Showing results 105 to 164 of 292

105
Optical Measurements of Water Droplet Characteristics in Turbulent Gasoline Pipe Flow

Bae, Choongsik; Kim, JH; Sheen, DH, SAE International Fuel & Lubricants Meeting, pp.0 - 0, 2001-05-01

106
Pilot분사가 HSDI디젤엔진의 성능과 배기에 미치는 영향

박철웅; 국상훈; 배충식, 한국자동차공학회 2003년 춘계학술대회, v.3, pp.286 - 291, 한국자동차공학회, 2003-05

107
SI 엔진에서 흡기밸브 개폐시기 변화와 배기스로틀이 잔류가스율과 배기가스 변화에 미치는 영향

장진영; 염기태; 배충식, 한국자동차공학회 2004년 춘계학술대회 , pp.65 - 70, 한국자동차공학회, 2004-06

108
Simulation of Fuel/Air Mixture Formation for Heavy Duty Liquid Phase LPG Injection (LPLI) Engines

Bae, Choongsik; Lee, E; Park, J; Huh, KY.; Choi, J, 2003 SAE Congress, v.112, pp.0 - 0, Society of Automotive Engineers, 2003-03

109
SI엔진 피스톤 결합체의 마찰력과 유막 두께 측정

조성우; 최상민; 배충식; 노석홍, 한국자동차공학회 1998년 춘계학술대회, v.98, pp.120 - 125, 한국자동차공학회, 1998-05

110
SI엔진에서 배기온도 저감을 위한 열교환기의 열해석

하미드라자; 이석환; 배충식, 한국자동차공학회 2003년 추계학술대회, v.3, pp.366 - 371, 한국자동차공학회, 2003-11

111
Soot reduction of a downsizing-concept 1.6l turbocharged gasoline direct-injection prototype engine

Emmerich, Christopher; Bae, Choongsik, 2010 한국자동차공학회 정기학술대회 및 전시회, 한국자동차공학회, 2010-11

112
Spray Characteristics of Diesel Injectors with Different Hydraulic Flow Rate

Park, Stephen Sungsan; Kim, Dong Hoon; Bae, Choong Sik, The Fourth International Education Forum on Environment and Energy Science, Academy for Co-creative Education of Environment and Energy Science (ACEEES), Tokyo Institute of Technology, 2015-12-07

113
Spray Charateristics of High-Pressure Injectors for HSDI Diesel Engines

Kang, J; Choi, S; Bae, Choongsik, Proc. 15th International Symposium on Internal Combustion Engines, pp.111 - 116, 1999-07

114
Structure and Mass Flux Distribution of a Side-opened Hollow Cone Spray Generated by Swirl Pressure Atomizers

Bae, Choongsik; Moon, S; E. Abo-Serie, Proceedings of the 21th ILASS-Meeting Europe 2007, ILASS, 2007-09-10

115
System Analysis of the Diesel Parallel Hybrid Vehicle Powertrain

Yeom, Kitae; Bae, Choongsik, 9th 2007 Korea-China International Conference on Internal Combustion Engine and Automotive Engineering, 2007-10

116
The application of diesel-fueled HCCI combustion in an automotive-size single-cylinder diesel engine

Bae, Choongsik; Kook, S; Park, Seik, Second International Symposium on “Clean and High Efficiency Combustion in Engines”, 2006-07-10

117
The Combined Effect of Multi-hole Injector with Pilot Injection and EGR in a HSDI Diesel Engine

Lee, S; Kook, S; Choi, W; Bae, Choongsik; Kim, J, International Combustion Engine Performance & Emissions Conference, v.0, no.0, pp.0 - 0, International Combustion Engine Performance & Emissions Conference, 2004-12

118
The Combustion of Liquefied Petroleum Gas in Stratified and Homogeneous Charge Compression Ignition Engine

Yeom, K; Bae, Choongsik, 6th international colloquium fuels, pp.201 - 208, TAE, 2007-01-11

119
The Correlation between Flow and Flame Propagation in a Four-Valve SI Engine

Kim. CS; Bae, Choongsik, Proc. the first Asia-Pacific Conference on Combustion (ASPACC97), pp.245 - 248, 1997-05

120
The Effect of Injection Location of DME and LPG HCCI Engine

Jang, Jinyoung; Bae, Choongsik, 11th International Symposium Sino-Korea Internal Combustion Engine and Automotive Engineering (SK ICEAE), Sino-Korea Internal Combustion Engine and Automotive Engineering, 2009-08

121
The Effect of Injector Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine

Moon,S; Choi, J; Essam Abo-Serie; Bae, Choongsik, 2005 SAE Congress, 2005-04

122
The Effect of Intake Port Design in Lean Burn SI Engines

Kang, K.Y.; Oh, S.M.; Lee, J.W.; Jung, D.S.; Lee, K.H.; Bae, Choongsik, Lean Burn Combustion Engines, pp.135 - 147, 1996-12-01

123
The effect of split injection in a spray guided DISI engine under the lean stratified operation

Oh, Heechang; Bae, Choongsik, 10th International Symposium on Combustion Diagnostics, AVL Deutschland GmbH, 2012-05-22

124
The Effects of Injection Methods and EGR on Combustion and Emission Characteristics of a Single Cylinder DISI Engine

Moon, S; Choi, J; Abo-Serie, Essam; Bae, Choongsik, 6th KSME-JSME Thermal and Fluids Engineering Conference, v.0, no.0, pp.0 - 0, 대한기계학회, 2005-03

125
The Effects of Intake Port Design on Flame Propagation in a Lean Burn Spark-Ignition Engine

Bae, Choongsik, Proc. the Ninth International Pacific Conference on Automotive Engineering (IPC-9), v.1, pp.303 - 308, SAE, 1997-11-01

126
The Effects of Pilot Injection on Combustion in Dimethyl-ether (DME) Direct Injection Compression Ignition Engine

Bae, Choongsik; Yoon, H; Yeom, K, 8th International Conference on Engines for Automobiles ICE2007, 2007-09

127
The Effects of Two-Stage Fuel Injection on Dimethyl-ether (DME) Homogeneous Charge Compression Ignition Engine Combustion

Yoon, H; Jeon, J; Bae, Choongsik, The 9th International conference on eng, 2011-06-30

128
The Frequency Variation Study Influenced by Spark Timing and Equivalence Ratio in a 2-Stroke Linear Engine

Kim, Jaeheun; Jang, Jinyoung; Park, Jungseo; Bae, Choongsik, 11th International Symposium Sino-Korea Internal Combustion Engine and Automotive Engineering (SK ICEAE), Sino-Korea Internal Combustion Engine and Automotive Engineering, 2009-08

129
The Hot Re-start Characteristics of Top-Feed Type Injector for Liquefied Petroleum Gas Liquid Phase Injection Engine

Yeom, K; Park, J; Bae, Choongsik; Park, J; Kim, S, 2008 SAE World congress, Society of Automotive Engineers, 2008-04-14

130
The Influence of Injector Parameters on Diesel Spray

Bae, Choongsik; Yu, J; Kang, J; Kong, J; Roy Cuenca; Lee, KyO, THIESEL2022 (Thermofluidynamic Processes in Diesel Engines), pp.55 - 66, THIESEL, 2002-09

131
The Influence of Intake Air Boosting and EGR on Diesel-Fueled HCCI Combustion in a DI-Diesel Engine

Bae, Choongsik; Park, S; Kook, S, THIESEL2006 conference (Thermo-and fluid dynamic Processes in Diesel Engines), pp.0 - 0, THIESEL, 2006-09

132
The Influence of Swirl Ratio and Injection Pressure on Low-Temperature Diesel Combustion and Emissions

Kook, S; Bae, Choongsik; Paul C Miles,; Dae Choi,; Michael Bergin; Rolf D. Reitz, 2006 SAE Congress, 2006-04

133
The Interaction between Turbulent Flow and Flame Propagation in an Internal Combustion Engine

Bae Choong Sik, Proc. the second TRA workshop, pp.75 - 91, 1995-12

134
TiAl 터보차저와 Inconel 718 터보차저의 정상상태, 과도응답 특성 비교

정진영; 오희창; 배충식, 2013 한국자동차공학회 부문 종합 학술대회, 한국자동차공학회, 2013-05

135
Top-Feed Type 인젝터의 LPG 액상분사 적용성

염기태; 박정서; 장진영; 문석수; 배충식; 박정남; 김성근, 한국자동차공학회 2006년 춘계학술대회, pp.1847 - 1852, 한국자동차공학회, 2006-06-01

136
Two-stage Fuel Direct Injection in a Diesel Fuelled HCCI Engine

Haiyun Su; Sebastian Mosbach; Markus Kraft; Amit Bhave; Kook, Sanghoon; Bae, Choongsik, JSAE/SAE Fuels and Lubricants Meeting v. no. pp.2007-01-01 - 7195, Society of Automotive Engineers, 2007

137
ULEV 대응엔진의 Wide Range O2 Sensor를 이용한 실화 감지기술 개발

정영교; 최상민; 배충식, 차세대자동차기술 워크숍, pp.8 - 13, 한국자동차부품연구원, 1998-09

138
ULEV 대응엔진의 Wide Range O2 Sensor를 이용한 실화 감지의 실용화 기술 개발

Bae Choong Sik, 차세대 자동차기술 워크숍, pp.9 - 14, 1999-09-01

139
ULEV 대응엔진의 Wide Range O2 Sensor를 이용한 실화 감지의 실용화 기술 개발

정영교; 최상민; 배충식, 제8회 차세대 자동차기술 워크숍, pp.123 - 128, 2000-09

140
VCO노즐에서 고압으로 분사되는 디젤분무의 특성

강징석; 배충식, 한국자동차공학회 2000년 춘계학술대회, pp.334 - 339, 한국자동차공학회, 2000-04

141
VCO노즐에서 분사되는 디젤분무의 분열영역 구조

강진석; 배충식, 한국자동차공학회 2003년 춘계학술대회 , v.1, pp.168 - 173, 한국자동차공학회, 2003-05

142
가변밸브 개폐시기의 연비성능에의 영향

구준모; 배충식, 대한기계학회 열공학부문 추계학술대회 , pp.261 - 266, 대한기계학회, 2000-09

143
가솔린 예혼합 압축 착화 엔진의 농후 한계에서 노킹 특성

염기태; 장진영; 배충식, 한국자동차공학회 2005년 추계학술대회, v.5, no.0, pp.112 - 117, 한국자동차공학회, 2005-11

144
가솔린 직분식 압축착화 엔진 저부하 영역 디젤/가솔린 분무의 쉴리렌, 쉐도우그래프, 미산란법적 가시화

박성산; 김동훈; 배충식, 2015년 한국액체미립화학회 학술강연회, 한국액체미립화학회, 2015-10-23

145
가솔린과 디젤을 연료로 적용한 대형 디젤 엔진에서 분사기 형상이 연소 및 배기 배출물에 미치는 영향

김기현; 김동훈; 정용진; 배충식, 2011 한국자동차공학회 정기학술대회 및 전시회, 한국자동차공학회, 2011-10

146
가솔린과 디젤을 연료로 적용한 대형 디젤엔진에서 저부하 영역 운전 특성 분석

김기현; 김동훈; 정용진; 배충식, 제 43회 KOSCO Symposium 논문집, 한국연소학회, 2011-12

147
가솔린과 디젤을 연료로 적용한 압축착화식 엔진에서 분사기가 연소 및 배기배출물에 미치는 영향

김기현; 김동훈; 정용진; 배충식, 제 45회 KOSCO Symposum, 한국연소학회, 2012-11

148
가솔린엔진의 흡기포트 형상이 유동과 연소에 미치는 영향

강건용; 오승묵; 이진욱; 조규백; 이기형; 배충식, 한국자동차공학회 1996년 춘계학술대회, v.96, pp.427 - 434, 한국자동차공학회, 1996-06

149
가스연료 엔진의 희박영역에서의 HC 배출물에 관한 연구

김창업; 배충식, 대한기계학회 1999년 춘추학술대회, v.2, no.2, pp.122 - 127, 대한기계학회, 1999

150
가스연료엔진에서 설계변수에 따른 HC 배출 특성

Bae Choong Sik, 제19회 KOSCO SYMPOSIUM, pp.183 - 188, 한국연소학회, 1999-10-01

151
가시화 엔진을 이용한 GDI분무의 관찰

이용표; 배충식; 최상민, 한국자동차공학회 1998년 춘계학술대회, v.98, pp.315 - 319, 한국자동차공학회, 1998-05

152
고압 가솔린/디젤, 액상 LPG 분사의 저온 연료분무 특성

최재준; 이석환; 최동석; 공장식; 강진석; 배충식, 한국자동차공학회 2002년 춘계학술대회 , pp.143 - 147, 한국자동차공학회, 2002-05

153
고압 스월분무 내부의 압력구조가 분무발달에 미치는 영향

문석수; Essam Abo Serie; 최재준; 배충식, 한국액체미립화학회 학술강연회 논문집 , pp.175 - 180, 한국액체미립화학회, 2006-06

154
고압선회분사기 노즐의 성능-전산유체 해석

장창수; 배충식; 최상민, 한국자동차공학회 1999년 춘계학술대회, v.1, pp.236 - 241, 한국자동차공학회, 1999-06

155
고온흡기를 적용한 예혼합 압축착화 디젤 엔진에서 EGR 율에 따른 엔진효율 및 배기가스 변화

국상훈; 박세익; 배충식, 한국자동차공학회 2006년 춘계학술대회, pp.478 - 483, 한국자동차공학회, 2006-06

156
공기공급압력에 따른 이중선회기 유동 및 이중오리피스 연료노즐의 분무특성

배충식; Warnke, V; 한영민; 설우석; 이대성, 한국항공우주학회 1997년 추계학술발표회 , pp.227 - 233, 한국항공우주학회, 1997-11

157
관형 연소기에서의 열음향학적 불안정성에 관한 실험적 연구

조상연; 이수갑; 정인석; 배충식, 제6차 유도무기 학술대회 , pp.199 - 203, 국방과학연구소, 1996-09

158
광역 산소센서를 이용한 실화감지-실화가스의 흐름 및 센서 응답특성의 영향

정영교; 최상민; 배충식, 한국자동차공학회 1998년 추계학술대회, v.1, pp.198 - 203, 한국자동차공학회, 1998-11

159
국제 에너지 기구/ 에너지 연구기술 위원회 고효율 저공해 연소기술 실행 합의서 활동 보고; Technology Agreemet on Energy Conversation and Emission Reductions in Combustion

배충식, 제 45회 KOSCO Symposium, 한국연소학회, 2012-11

160
급속 흡입,압축,팽창 장치에서의 내부 EGR율과 밸브 개폐시기에 따른 제어 자발화에 관한 실험적 연구

문건필; 조규백; 이용규; 정동수; 배충식, 한국자동차공학회 2006년 춘계학술대회, v.0, no.0, pp.209 - 214, 한국자동차공학회, 2006-06

161
냉시동시 미연 탄화수소의 저감을 위한 가솔린기관의 제어기 연구

Bae Choong Sik, 한국자동차공학회 2001년 추계학술대회, pp.87 - 92, 2001-11-01

162
냉시동시 배기가스 온도 측정에 의한 가솔린 기관의 공연비 예측

이동원; 장현탁; 배충식; Dennis Assanis, 한국자동차공학회 2000년 춘계학술대회, pp.86 - 91, 한국자동차공학회, 2000-04

163
냉시동시 연료분사 특성이 HC배출에 미치는 영향에 대한 실험적 연구

우영민; 이용표; 배충식, 한국자동차공학회 1999년 추계학술대회, v.99, pp.22 - 27, 한국자동차공학회, 1999-11

164
노즐형상에 따른 디젤분무 하단에서의 분무입자 특성

배충식; 공장식, 한국액체미립화학회 학술강연회, pp.169 - 174, 한국액체미립화학회, 2007

rss_1.0 rss_2.0 atom_1.0