2144 | 자가 보정을 이용한 정밀 기계의 계통오차 계산 = Self-calibration of systematic errors for precision machineslink 유승봉; Yoo, Seung-Bong; et al, 한국과학기술원, 2004 |
2145 | 자기 충격 액추에이터를 이용한 캡슐형 구동 기구 = The capsule type movement system with the magnetic impact actuatorslink 민현진; Min, Hyun-Jin; et al, 한국과학기술원, 2004 |
2146 | 자기베어링을 이용한 무진공챔버 초원심분리기에 관한 연구 = Study on vacuum chamber-free ultracentrifuge with magnetic bearingslink 박철훈; Park, Cheol Hoon; et al, 한국과학기술원, 2014 |
2147 | 자기예압 공기베어링 스테이지의 능동보정을 통한 초정밀 직선운동 특성에 관한 연구 = Study on ultraprecision straight motion by active compensation of air bearing stage with magnetic preloadlink 노승국; Ro, Seung-Kook; et al, 한국과학기술원, 2008 |
2148 | 자동차 구조용 복합재료 충격흡수봉에 관한 연구 = A study on the composite impact beams for an auto-bodylink 전성식; Cheon, Seong-Sik; et al, 한국과학기술원, 1999 |
2149 | 자동차 디자인에서 스케치 기반 3D 모델의 생성 = Sketch-based 3D model reconstruction in automotive designlink 천상욱; Cheon, Sang-Uk; et al, 한국과학기술원, 2008 |
2150 | 자동차용 강판 고속인장물성 데이터의 측정불확도 산출 = Measurement uncertainty evaluation for high strain rate tensile properties of auto-body steel sheetslink 정세환; Jeong, Se-Hwan; et al, 한국과학기술원, 2012 |
2151 | 자동화 제조 시스템의 시뮬레이션을 위한 JR-net 모델링 = Job resource relation-net modeling for the simulation of automated manufacturing systemlink 한관희; Han, Kwan-Hee; et al, 한국과학기술원, 1996 |
2152 | 자외선 경사 노광과 고분자 성형공정을 이용한 미세바늘 제작 공정 개발 및 제작된 미세바늘의 특성 분석 = The development of microneedles’ fabrication methods using inclined UV lithography and polymer molding process, and the analyses of the microneedles’ characteristicslink 한만희; Han, Man-hee; et al, 한국과학기술원, 2008 |
2153 | 자유곡면을 위한 5-축 정밀가공에 관한 연구 = A study on the 5-axis precision machining for sculptured surfaceslink 조현덕; Cho, Hyun-Deog; et al, 한국과학기술원, 1993 |
2154 | 자율 주행방식의 이동 로봇을 위한 경로 제어 알고리즘에 관한 연구 = A study on the path tracking control algorithm for free-ranging mobile robotslink 고경철; Koh, Kyoung-Chul; et al, 한국과학기술원, 1992 |
2155 | 작용-유도 분자 동역학을 이용한 나노시스템의 결함거동 연구 = A study on defect behaviors in nanosystems using action-derived molecular dynamics methodlink 이영민; Lee, Young-Min; et al, 한국과학기술원, 2010 |
2156 | 작은 원봉에 의한 원주와유동의 변형에 관한 연구 = A numerical study on alteration of the vortical flow behind a circular cylinder by a small control wirelink 김학봉; Kim, Hark-Bong; et al, 한국과학기술원, 1995 |
2157 | 잔류응력장에서의 피로균열닫힘 거동의 유한요소해석 = Finite element analysis of fatigue crack closure behaviour in a residual stress fieldlink 최현창; Choi, Hyeon-Chang; et al, 한국과학기술원, 1994 |
2158 | 잡음 속에 묻힌 임펄스 소음원의 위치 추정 = Impulsive source localization in noisy environmentlink 최영철; Choi, Young-Chul; et al, 한국과학기술원, 2005 |
2159 | 재구성 가능한 능동적 영상 시스템을 이용한 마이크로MEMS 부품의 영상기반조립 = Visually guided assembly of micro MEMS parts using reconfigurable active vision systemlink 이덕영; Lee, Duk-Youn; et al, 한국과학기술원, 2010 |
2160 | 재료의 연성파단을 예측하기 위한 연속체 손상 항복 함수에 관한 연구 = A study on a continuum damage yield function to predict ductile fracture of materialslink 고윤기; Ko, Youn Ki; et al, 한국과학기술원, 2011 |
2161 | 재료조각법을 이용한 위상최적설계 = Material cloud method for topology optimizationlink 장수영; Chang, Su-Young; et al, 한국과학기술원, 2005 |
2162 | 재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink 최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013 |
2163 | 저 가시성 환경에서 효과적인 영상 개선 방법 및 특징 추출에 관한 연구 = (A) study on effective image improvement method and feature extraction in low visibility environmentslink 김경일; 김수현; et al, 한국과학기술원, 2018 |
2164 | 저결맞음 간섭계를 이용한 다층 형상 측정 = Multiple-layered surface measurement using low-coherence interferometrylink 이창윤; Lee, Chang-Yun; et al, 한국과학기술원, 2016 |
2165 | 저결맞음 간섭계를 이용한 대구경 거친 유리 표면 형상 측정 = Large-aperture ground glass surface form measurement using low-coherence scanning interferometrylink 배은덕; Bae, Eun-Deok; et al, 한국과학기술원, 2017 |
2166 | 저결맞음 간섭계를 이용한 대면적 복잡 형상 측정 = Meso-scale complex surface measurement using low-coherence interferometrylink 유준호; You, Joon-Ho; et al, 한국과학기술원, 2008 |
2167 | 저속충격을 받는 복합적층판의 거동과 손상에 대한 연구 = Response and damage of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1994 |
2168 | 저주파수 흡음을 위한 헬름홀쯔 공명기 배열형 패널의 설계 방법론 = Design method of helmholtz resonator array panels for low-frequency sound absorptionlink 김상렬; Kim, Sang-Ryul; et al, 한국과학기술원, 2006 |
2169 | 저항 점용접의 공정 해석에 의한 용접부의 잔류응력과 변형에 대한 연구 = A study on residual stress and deformation of resistance spot welded structure using process analysislink 차병우; Cha, Byoung-Woo; 나석주; 송지호; et al, 한국과학기술원, 2002 |
2170 | 저해상도 지도를 참조하는 다중정합 기반 영상항법 알고리즘 연구 = Multi-matching based vision navigation algorithm referencing a low-resolution maplink 신석현; 이지윤; et al, 한국과학기술원, 2022 |
2171 | 적층 복합재 구조물에 대한 확률유한요소법과 시스템 신뢰도 해석 = Stochastic finite element method and system reliability analysis for laminated composite structureslink 박지상; Park, Ji-Sang; et al, 한국과학기술원, 1995 |
2172 | 적층고무 면진베어링을 이용한 원자로구조물의 지진응답 감소방법에 관한 연구 = Study on laminated rubber bearing to reduce a nuclear reactor structure's seismic responseslink 유봉; Yoo, Bong; et al, 한국과학기술원, 2002 |
2173 | 적층로터 및 고감쇠 베어링의 해석과 펄스발전기의 설계 및 성능 특성에 관한 연구 = Analysis of laminated rotor and high damped bearing and study on design and performance characteristics of pulsed generatorlink 김영춘; Kim, Yeong-Chun; et al, 한국과학기술원, 2004 |
2174 | 전개성능을 고려한 태양전지판 전개장치용 테잎스프링 힌지 설계 연구 = A study on the tape spring hinge design for deployment device of satellite solar array considering deployment performanceslink 김경원; Kim, Kyung Won; et al, 한국과학기술원, 2015 |
2175 | 전기도금공정을 이용하여 제작된 전해질 기울기 센서 = Electrolytic tilt sensor fabricated by using electroplating processlink 이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 2009 |
2176 | 전기도금된 나노 결정립 니켈 박막의 인장 및 피로 거동 평가 = Evaluation of tensile and fatigue behavior of electrodeposited nanocrystalline nickel filmslink 백동천; Baek, Dong-Cheon; et al, 한국과학기술원, 2009 |
2177 | 전기력이 응집체의 형상과 성장특성에 미치는 영향에 대한 연구 = The effect of electric force on morphology and growth of aggregatelink 박형호; Park, Hyung-Ho; et al, 한국과학기술원, 2002 |
2178 | 전기수력학적 힘을 이용한 단분산 액적의 생성에 관한 연구 = Generation of monodisperse droplets by using electrohydrodynamic forcelink 김명찬; Kim, Myoung-Chan; et al, 한국과학기술원, 2003 |
2179 | 전기자동차용 변속기를 위한 새로운 방식의 클러치 기구에 대한 연구 = (A) study on the new clutch mechanism for the electric vehicle transmissionlink 박승욱; 최세범; Choi, Sei Bum; 김경웅; et al, 한국과학기술원, 2019 |
2180 | 전기장 제어 확산 화염의 연소 특성 연구 = Investigation on the combustion characteristics of the electric field controlled diffusion flamelink 김상민; 백승욱; et al, 한국과학기술원, 2019 |
2181 | 전기장을 이용한 카본나노튜브 정렬 및 부착에 관한 연구 = A study on alignment and attachment of carbon nanotube using dlectric fieldlink 이형우; Lee, Hyung-Woo; et al, 한국과학기술원, 2005 |
2182 | 전기장인가조립법에 의한 탄소나노튜브 카트리지 개발 = Development of carbon nanotube cartridges using electric-field-assisted assembly methodlink 최재성; Choi, Jai-Seong; et al, 한국과학기술원, 2008 |
2183 | 전기적 분무 열분해를 이용한 나노 구조 물질 제조 = Synthesis of nanostructured materials using electrospray pyrolysislink 오현철; Oh, Hyun-Cheol; et al, 한국과학기술원, 2008 |
2184 | 전기적으로 대전된 액적의 충돌 후 거동에 관한 실험적 연구 = An experimental study on post-impingement behavior of an electrically charged dropletlink 류성욱; Ryu, Sung-Uk; et al, 한국과학기술원, 2008 |
2185 | 전단층 유동의 안정 및 준안정 해석 = Spectra and pseudospectra of shear flowslink 최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 2003 |
2186 | 전도 균열을 갖는 강유전체 세라믹의 파괴 인성에 관한 연구 = A study on a fracture toughness for conducting crack in ferroelectric ceramicslink 범현균; Beom, Hyen-Kyun; et al, 한국과학기술원, 2003 |
2187 | 전도성 혼합 섬유를 이용한 직물형 밀리미터파 흡수체 설계 = Design of fabric millimeter wave absorber using mixed conductive yarnlink 신상훈; Shin, Sang-Hun; et al, 한국과학기술원, 2010 |
2188 | 전동형 진동식 압축기의 동적 해석 = Analysis of dynamics of electrodynamic oscillating compressorlink 최규상; Choe, Gyu-Sang; et al, 한국과학기술원, 2000 |
2189 | 전류 환경 아래에서 유연 전극 박막의 전기-기계적 특성 연구 = Electro-mechanical characteristics of flexible conductive film on polymer substrate under electric currentlink 장동원; Jang, Dong-Won; et al, 한국과학기술원, 2017 |
2190 | 전문가 시스템을 이용한 복합재 구조물의 설계 = Design of composite structures using expert systemlink 김정석; Kim, Jung-Seok; et al, 한국과학기술원, 1999 |
2191 | 전문가 시스템을 이용한 자동조립순서 추론에 관한 연구 = An expert system approach to the automatic generation of robotic assembly sequenceslink 조덕영; Cho, Duck-Young; et al, 한국과학기술원, 1992 |
2192 | 전문가시스템 구축을 통한 피로수명 평가법의 통합과 그 응용 = Development of unified method for fatigue life evaluation through construction of expert system and its applicationlink 전우수; Jeon, Woo-Soo; et al, 한국과학기술원, 2001 |
2193 | 전산유체역학과 유한요소기법의 연동체제를 이용한 아크 용접공정의 열적-금속학적-기계적 거동에 대한 연구 = A thermal-metallurgical-mechanical study of arc welding processes by computational fluid dynamics and finite element method frameworklink 천현필; Cheon, Jason Hyeon Pil; et al, 한국과학기술원, 2017 |
2194 | 전산유체역학을 이용한 예인되는 부유체의 침로 안정성에 대한 연구 = A study on directional stability of towed floating bodies by computational fluid dynamicslink 권창섭; Kwon, Chang Seop; et al, 한국과학기술원, 2015 |
2195 | 전산유체역학을 활용한 파이프 조관용접 및 원주방향 용접의 용융풀 거동에 대한 연구 = A study on molten pool flow behavior in pipe seam welding and girth welding processes by computational fluid dynamicslink 조대원; Cho, Dae-Won; et al, 한국과학기술원, 2014 |
2196 | 전압구동시 압전구동기의 위치결정 정도에 대한 비선형모델링에 관한 연구 = Nonlinear modeling for positioning uncertainty of piezoelectric actuators driven by voltage inputlink 정승배; Jung, Seung-Bae; et al, 한국과학기술원, 1993 |
2197 | 전역 및 광대역 실내 소음 제어를 위한 흡음재 배치 방법론 = Absorptive material arrangement method for global interior noise control in wide frequency rangelink 조성호; Cho, Sung-Ho; et al, 한국과학기술원, 2005 |
2198 | 전자 패키지에서 다층 구조의 기계적인 신뢰성에 관한 연구 = A study on mechanical reliability of multi- layered structure in electronic packageslink 김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 2002 |
2199 | 전자 패키징을 위한 종방향 초음파 접합 공정에 관한 연구 = A study on longitudinal ultrasonic bonding process for electronic packaginglink 김정호; Kim, Jung-Ho; et al, 한국과학기술원, 2004 |
2200 | 전자기유량계의 특성 평가를 위한 자기장과 유동장의 실험 및 수치해석 = An experimental and numerical analysis of electromagnetic and flow fields for characterization of an electromagnetic flowmeterlink 임기원; Lim, Ki-Won; et al, 한국과학기술원, 1998 |
2201 | 전자기적 아크 요동을 이용한 자동용접에 관한 연구 = A study on the automatic welding by using electromagnetic arc oscillationlink 강윤희; Kang, Youn-Hee; et al, 한국과학기술원, 2002 |
2202 | 전자식 유압 비례 복합 밸브에 관한 연구 = Study of an electro-hydraulic proportional compound valvelink 송창섭; Song, Chang-Seop; et al, 한국과학기술원, 1980 |
2203 | 전자파흡수 복합재구조의 흡수 성능 향상을 위한 제작 공정 연구 = Fabrication methods for the improved absorption performance in microwave-absorbing compositeslink 송태훈; 김천곤; et al, 한국과학기술원, 2015 |