1141 | 솔-젤 하이브리드 재료의 유기 박막 트랜지스터용 게이트 절연막 및 기체 차단막 응용 = Application of sol-gel hybrid materials to gate dielectrics and barrier layers in organic thin film transistorslink 최천기; Choi, Chaun-Gi; et al, 한국과학기술원, 2008 |
1142 | 솔-젤 합성된 비닐-올리고실록산 기반 실록산 하이브리드 재료의 제조 및 응용 = Fabrication and applications of Sol-Gel synthesized Vinyl-Oligosiloxane based siloxane hybrid materialslink 김준수; Kim, Joon-Soo; et al, 한국과학기술원, 2012 |
1143 | 수소를 이용한 비정질 Zr - Ni 합금에서의 구조에 관한 연구 = A study on the structure of the amorphous Zn-Ni alloys using hydrogenlink 장택희; Jang, Taek-Hee; et al, 한국과학기술원, 1992 |
1144 | 수소저장합금을 이용한 히트펌프의 작동특성 및 수소저장합금의 동적반응특성에 관한 연구 = A study on the operating characteristics of metal hydride heat pump and the dynamic reaction of hydride in the reactorlink 이수근; Lee, Soo-Geun; et al, 한국과학기술원, 1995 |
1145 | 수열합성법으로 증착한 PZT 박막의 강유전성 및 전왜 특성 연구 = Study of the ferroelectricity and electrostriction of PZT thin film fabricated by hydrothermal synthesislink 유동주; You, Dong-Joo; et al, 한국과학기술원, 2004 |
1146 | 수열합성을 이용한 페로브스카이트계 분말의 제조 = Synthesis of perovskite oxide powders under hydrothermal conditionslink 최재영; Choi, Jae-Young; et al, 한국과학기술원, 1998 |
1147 | 수직공진형 표면방출 레이저의 편광 조절에 관한 연구 = A study on the polarization control of vertical-cavity surface-emitting laserlink 박민수; Park, Min-Soo; et al, 한국과학기술원, 1999 |
1148 | 순 탄소강과 듀플렉스 스테인레스강의 동적변태와 동적재결정에 관한 연구 = Study of the dynamic transformation and recrystallization of plain carbon steel and duplex stainless steellink 김관호; Kim, Kwan-Ho; et al, 한국과학기술원, 2005 |
1149 | 순은에서 산소 원자에 의한 입계 이동 현상과 열간부식에 관한 연구 = Grain boundary migration induced by oxygen in silver and thermal etching of silverlink 유차영; Yoo, Cha-Young; et al, 한국과학기술원, 1993 |
1150 | 스위치 소자용 열구동형 다결정 실리콘 마이크로브릿지의 열적 구동특성 연구 = A study on the actuations characteristics of thermally-driven polycrystalline silicon microbridge for switching device applicationslink 이재열; Lee, Jae-Youl; et al, 한국과학기술원, 1999 |
1151 | 스퍼터 증착한 CoCrTa/Cr 박막의 미세구조 및 전기적, 자기적 특성 = Microstructure and electromagnetic properties of sputtered CoCrTa/Cr thin filmslink 이종학; Lee, Jong-Hak; et al, 한국과학기술원, 1994 |
1152 | 스퍼터링으로 증착된 (NiFe)-Ag 및 Fe-Ag 미세입상합금 박막의 증착 특성, 미세 구조 및 거대자기저항 현상에 관한 연구 = Study on the deposition characteristic, microstructures and ginat-magnetoresistance of (NiFe)-Ag and Fe-Ag granular thin films prepared by DC magnetron sputteringlink 오태석; Oh, Tae-Seok; et al, 한국과학기술원, 1999 |
1153 | 실리콘 기판 위에 졸겔 스핀 코팅법으로 제조된 티탄산연 박막의 미세 구조 및 결정화에 대한 고찰 = Microstructural and crystallizational aspects of sol gel spin coated lead titanate thin films on a silicon substratelink 이전국; Lee, Jeon-Kook; 김종희; 정형진; et al, 한국과학기술원, 1990 |
1154 | 실리콘 팁의 코발트 실리사이드와 질화물 코팅에 의한 전계 방출 및 파괴 거동에 관한 연구 = A study on the field emission and failure behaviors of silicon tip arrays with Co-Silicide and Nitride coating layerslink 한병욱; Han, Byung-Wook; et al, 한국과학기술원, 2001 |
1155 | 실리콘계 유전 박막의 원자층 증착에 관한 연구 = Atomic layer deposition of Si-based dielectric thin filmslink 이주현; Lee, Joo-Hyeon; et al, 한국과학기술원, 2004 |
1156 | 아민-올리고실록산을 이용한 이미드 하이브리드 재료의 제조 및 특성 = Synthesis and characterization of imide hybrid materials using amine-oligosiloxaneslink 이태호; Lee, Tae-Ho; et al, 한국과학기술원, 2007 |
1157 | 알루미나에서 조성변화에 의한 계면이동과 재결정 = Chemically induced interface migration and recrystallization in aluminalink 백용균; Paek, Yeong-Kyeun; et al, 한국과학기술원, 1995 |
1158 | 알루미나에서 확산정합 변형과 순은에서 열적 변형에 의한 입계이동 = Grain boundary migration induced by diffusional coherency strain in $Al_2O_3$ and by thermal strain in Aglink 한상철; Han, Sang-Cul; et al, 한국과학기술원, 1995 |
1159 | 알루미늄 및 마그네슘 합금의 소실모형주조 시 수소 흡수에 관한 연구 = A study on the hydrogen gas pick-up of Al alloy and Mg alloy-melt during lost foam castinglink 신승열; Shin, Seung-Yul; et al, 한국과학기술원, 2004 |
1160 | 알루미늄 용탕 내 용존수소 측정용 이종접합 고체전해질 전기화학식 수소센서에 관한 연구 = Hetero-junction solid electrolyte electrochemical hydrogen sensors for the measurement of dissolved hydrogen in Al melt.link 정병효; Jung, Byoung-Hyo; et al, 한국과학기술원, 2013 |
1161 | 알루미늄 합금의 응고조직과 열전달현상에 대한 GPa 가압력의 영향 = Effect of GPa pressure on microstructures and heat transfer phenomena of aluminum alloys during solidificationlink 한요섭; Han, Yo-Sub; 이호인; 김영길; et al, 한국과학기술원, 1994 |
1162 | 알루미늄과 이종소재의 접합공정 및 접합기구 = Joining process and bonding mechanism between aluminum and dissimilar metalslink 손웅희; Sohn, Woong-Hee; et al, 한국과학기술원, 2003 |
1163 | 알콜과 물의 혼합용액에서 금속염의 가수분해에 의한 단분산 구형의 $ZrTiO_4$분말의 합성 = Synthesis of monodisperse spherical $ZrTiO_4$ particles by thermal hydrolysis of metal salts in alcohol-water solutionlink 박홍규; Park, Hong-Kyu; 김도경; 김종희; et al, 한국과학기술원, 1996 |
1164 | 압전 박막을 이용한 Bragg 회절형 acousto-optic 소자의 제조 및 특성평가 = Fabrication and characterization of bragg-diffraction type acousto-optic device using piezoelectric thin filmslink 이창호; Lee, Chang-Ho; et al, 한국과학기술원, 2002 |
1165 | 압전성 박막의 특성평가에 관한 연구 = A study on the characterization of piezoelectric thin filmslink 김동국; Kim, Dong-Guk; et al, 한국과학기술원, 2001 |
1166 | 압전세라믹-폴리머 복합체의 유전 및 압전특성 = Dielectric and piezoelectric properties of piezoelectric ceramic-polymer compositeslink 이형규; Lee, Hyeung-Gyu; et al, 한국과학기술원, 1989 |
1167 | 액상 침투반응에 의하여 제조된 $ZrB_2$계 세라믹스의 미세구조 변화 및 기계적 특성연구 = Microstructure and mechanical properties of zirconium boride ceramics prepared by liquid infiltration reactionlink 우상국; Woo, Sang-Kuk; et al, 한국과학기술원, 1994 |
1168 | 액상기지에 분포하는 각진 입자의 비정상 성장 = Abnormal growth of faceted grains in liquid matrixlink 박영준; Park, Young-Joon; et al, 한국과학기술원, 1995 |
1169 | 액상량이 적은 Co-Cu 및 Fe-Cu 소결합금의 입자성장에 관한 연구 = Coarsening of solid grains with small liquid matrix content in sintered Co-Cu and Fe-Cu alloyslink 강수석; Kang, Su-Sok; et al, 한국과학기술원, 1980 |
1170 | 액상법을 이용하여 표면코팅된 리튬이차전지용 양극재의 전기화학적 특성 및 열적 안전성에 관한 연구 = A study on the electrochemical properties and the thermal safety of cathode materials coated by solution-based chemical process for lithium rechargeable batterieslink 박성철; Park, Sung-Chul; et al, 한국과학기술원, 2001 |
1171 | 액상보조반응법을 이용한 $BaAl_2S_4:Eu^{2+}$ 청색 형광체의 저온 합성에 관한 연구 = Low temperature synthesis of blue-emitting $BaAl_2S_4:Eu^{2+}$ phosphor using liquid-assisted reactionlink 조양휘; Cho, Yang-Hwi; et al, 한국과학기술원, 2009 |
1172 | 액상소결시의 미세조직 변화 = Microstructural changes during phase sinteringlink 박종구; Park, Jong-Ku; 윤덕용; 은광용; et al, 한국과학기술원, 1989 |
1173 | 액상소결에서 입자, 액상 menisci 및 기공의 형태변화에 대한 해석 = Analysis of morphological changes of grains, menisci and pores in liquid phase sinteringlink 박효훈; Park, Hyo-Hoon; et al, 한국과학기술원, 1985 |
1174 | 액상소결의 이론적 분석 = Theoretical analysis of liquid-phase sinteringlink 이성민; Lee, Sung-Min; et al, 한국과학기술원, 1999 |
1175 | 액상소결한 Mo-Ni 합금에서 용질원자 첨가에 의한 계면불안정성과 재결정 = Interface instability recrystallization in liquid phase sintered Mo-Ni induced by solute additionlink 박영호; Park, Yong-Ho; et al, 한국과학기술원, 1992 |
1176 | 얇고 평활한 PZT 나노박막의 제조와 특성 분석 = Fabrication and characterization of thin and smooth PZT nano filmslink 송한욱; Song, Han-Wook; et al, 한국과학기술원, 2002 |
1177 | 어븀 착물이 첨가된 졸-겔 하이브리드 재료의 광특성 = Optical properties of sol-gel hybrid materials doped with erbium complexlink 박언호; Park, Oun-Ho; et al, 한국과학기술원, 2003 |
1178 | 에어백용 SCB(semi-conductor bridge)소자 제조 및 특성 = Fabrication and characterization of SCB(semi-conductor bridge) device for air-bag applicationlink 이계남; Lee, Kye-Nam; et al, 한국과학기술원, 2001 |
1179 | 에폭시/$BaTiO_3$ 복합 내장형 커패시터 필름에 관한 연구 = A study on epoxy/$BaTiO_3$ composite embedded capacitor films (ECFs)link 조성동; Cho, Sung-Dong; et al, 한국과학기술원, 2004 |
1180 | 에피택시 구조의 하부강자성전극을 갖는 자기터널접합의 특성 = Properties of magnetic tunnel junctions with epitaxial ferromagnetic bottom electrodeslink 유지형; Yu, Ji-Hyung; et al, 한국과학기술원, 2004 |
1181 | 연강과 Al-Si 합금의 마모성질에 미치는 수소와 부동태 피막의 영향에 대한 연구 = Effects of hydrogen and passivating film on the wear properties of mild steel and Al-Si alloylink 김종상; Kim, Jong-Sang; et al, 한국과학기술원, 1989 |
1182 | 열광학 광도파로 소자 응용을 위한 솔-젤 하이브리드 소재의 특성 = Characteristics of the sol-gel derived hybrid materials for application of thermo-optic waveguide deviceslink 강은석; Kang, Eun-Seok; et al, 한국과학기술원, 2004 |
1183 | 열산화 조건과 열처리 조건이 Silicon 위에 형성한 tantalum oxide 의 성질에 미치는 영향 = Effects of oxidation and annealing conditions on the properties of tantalum oxide films on silicon substrateslink 박성욱; Park, Sung-Wook; et al, 한국과학기술원, 1992 |
1184 | 열처리 온도와 저변형이 규소강의 입자 성장과 집합조직에 미치는 영향 = Effects of temperature and small deformation on grain growth and texture in silicon steellink 최정식; Choi, Jeong-Sik; et al, 한국과학기술원, 2003 |
1185 | 열처리를 통한 CIGS 박막의 표면 개선과 CIGS 태양전지 특성에 미치는 영향 = Surface modification of CIGS film by annealing and its effect on the performance of CIGS solar cellslink 신영민; Shin, Yeong-Min; et al, 한국과학기술원, 2014 |
1186 | 열처리한 소결체 CdS 박막의 전자적 특성 및 CdTe층의 제조 조건이 CdS/CdTe 태양전지의 특성에 미치는 영향 = Electronic properties of heat-treated CdS films and effects of fabrication conditions CdTe layer on the photovoltaic properties of sintered CdS/CdTe solar cellslink 문주태; Moon, Joo-Tae; et al, 한국과학기술원, 1989 |
1187 | 염소계 플라즈마를 이용한 구리박막의 건식 식각기구에 관한 연구 = A study on the dry etching mechanism of copper film in chlorine-based plasmalink 이성권; Lee, Sung-Kwon; et al, 한국과학기술원, 1997 |
1188 | 오스테나이트 스테인리스 Type 347강의 고온 파괴인성에 미치는 탄소 및 질소의 영향 = Effects of carbon and nitrogen on the high temperature fracture toughness of austenitic stainless steel, Type 347link 유완; Yoo, One; et al, 한국과학기술원, 2005 |
1189 | 오스테나이트계 Fe-26Mn-Al 합금의 미세조직 및 저온변형 거동에 미치는 알루미늄의 영향 = The effect of aluminum on microstructures and low temperatire deformation behaviors in austenitic Fe-26Mn-Al alloyslink 이종석; Lee, Jong-Seog; et al, 한국과학기술원, 1989 |
1190 | 오스테나이트계 Fe-30Mn-1.2Al-C 합금의 저온 변형 거동에 미치는 탄소의 영향 = The effects of carbon on low temperature deformation behavior in austenitic Fe-30Mn-1.2Al-C alloyslink 한종만; Han, Jong-Man; et al, 한국과학기술원, 1989 |
1191 | 오스테나이트계 Fe-Mn-Cr-Al-C 합금에서 변형유기상변태가 소성변형거동 및 기계적성질에 미치는 영향 = Effect of strain-induced phase transformation on the plastic deformation behavior and mechanical properties in austenitic Fe-Mn-Cr-Al-C alloyslink 오방원; Oh, Bang-Won; et al, 한국과학기술원, 1995 |
1192 | 오스테나이트계 스테인레스강의 크리프-피로 상호작용시 cavity 소멸을 고려한 수명연장에 관한 연구 = A study on the life extension by the annihilation of cavity in austenitic stainless steel under creep-fatigue interaction conditionlink 최백규; Choi, Baig-Gyu; et al, 한국과학기술원, 1999 |
1193 | 오스테나이트계 스테인리스강에서 크리프-피로 특성에 영향을 미치는 입계탄화물 석출 및 제어에 관한 연구 = A study on the precipitation mechanism and control of grain boundary carbide affecting the creep-fatigue properties in austenitic stainless steelslink 홍현욱; Hong, Hyun-Uk; et al, 한국과학기술원, 2002 |
1194 | 용액 공정 기반 산화 아연 주석 박막 트랜지스터의 제작 및 특성 = Fabrication and characterization of Solution-Processed Zinc Tin Oxide thin film transistorslink 서석준; Seo, Seok-Jun; et al, 한국과학기술원, 2011 |
1195 | 용융규소를 통한 질화규소의 α/β상변태와 이에 따른 미세구조 변화에 관한 연구 = A study on the α to βphase transformation and correlated microstructures in silicon nitridelink 박지연; Park, Ji-Yeon; et al, 한국과학기술원, 1987 |
1196 | 용융탄산염 연료전지의 셀 성능에 미치는 운전변수의 영향 = Effects of operation parameters on the cell performance of molten carbonate fuel cellslink 윤주영; Youn, Juyoung; et al, 한국과학기술원, 2013 |
1197 | 원심분무에 의한 Uranium silicide 분산핵연료의 제조와 특성 = Preparation and characterization of uranium silicide dispersion nuclear fuel by centrifugal atomizationlink 김창규; Kim, Chang-Kyu; et al, 한국과학기술원, 1994 |
1198 | 원자로 재료의 접합에 용가제로 사용되는 비정질 Zr-Be계 합금의 열적 안정성 및 브레이징 특성에 대한 연구 = A study on the thermal stability and brazing characteristics of amorphous Zr-Be based alloys as filler metals for joining nuclear materialslink 박춘호; Park, Choon-Ho; et al, 한국과학기술원, 2000 |
1199 | 원자로압력용기용 Ni-Cr-Mo계 저합금강의 미세조직 및 상안정성에 미치는 합금원소 및 상분율의 영향 = Effects of alloying elements and phase fractions on microstructure and phase stability of Ni-Cr-Mo low alloy steelslink 박상규; Park, Sang-Gyu; et al, 한국과학기술원, 2011 |
1200 | 원자로압력용기용 고강도 Ni-Cr-Mo계 저합금강의 천이영역에서의 벽개파괴특성 고찰 = Cleavage fracture properties in transition temperature region on high strength Ni-Cr-Mo low alloy steels for reactor pressure vesselslink 이기형; Lee, Ki-Hyoung; et al, 한국과학기술원, 2011 |