1141 | 원자로압력용기용 고강도 Ni-Cr-Mo계 저합금강의 천이영역에서의 벽개파괴특성 고찰 = Cleavage fracture properties in transition temperature region on high strength Ni-Cr-Mo low alloy steels for reactor pressure vesselslink 이기형; Lee, Ki-Hyoung; et al, 한국과학기술원, 2011 |
1142 | 원자층 증착법을 이용한 고효율 CIGS 태양전지용 $Zn_{1-x}Sn_xO$ 버퍼층 개발에 대한 연구 = Development of $Zn_{1-x}Sn_xO$ buffer layer for high efficient CIGS solar cells by atomic layer depositionlink 김선철; Kim, Suncheul; et al, 한국과학기술원, 2017 |
1143 | 원자층증착법에 의한 $HfO_2$ 게이트절연막의 성장과 플라즈마처리에 의한 질화에 관한 연구 = Study on $HfO_2$ gate dielectric grown by atomic layer deposition and its nitridation by plasma treatmentlink 박건식; Park, Kun-Sik; et al, 한국과학기술원, 2011 |
1144 | 원자층증착법으로 제조한 Zn1-xMgxO 박막을 버퍼층으로 이용한 Cd-free CIGS 태양전지의 성능 향상에 관한 연구 = Performance improvement of Cd-free CIGS solar cells using Zn1-xMgxO buffer layers deposited by atomic layer depositionlink 이창수; Lee, Chang-Soo; et al, 한국과학기술원, 2013 |
1145 | 유기금속화학증착법에 의한 GaAs 와 $Al_xGa_{1-x}$As 의다층에피 성장 = Multilayer epitaxial growth of GaAs and $Al_xGa_{1-x}$ by metalorganic chemical vapor depositionlink 김무성; Kim, Moo-Sung; et al, 한국과학기술원, 1986 |
1146 | 유기전자 재료 가스 차단막 응용을 위한 고성능 유-무기 하이브리드 재료 = High performance organic-inorganic hybrid materials for application in gas barrier of organic electronicslink 정경호; Jung, Kyung-Ho; et al, 한국과학기술원, 2011 |
1147 | 유도결합 플라즈마를 이용한 PZT 박막의 건식에칭 특성에 관한 연구 = A study on the etching characteristics of PZT films using Inductively coupled Plasmalink 정진기; Jung, Jin-Ki; et al, 한국과학기술원, 2001 |
1148 | 유지시간에 따른 응력이완과 히스테리시스 에너지를 이용한 크리프-피로 수명예측 = Creep-fatigue life prediction in terms of stress relaxation and hysteresis loop energy with hold timelink 정창렬; Jeong, Chang-Yeol; et al, 한국과학기술원, 2000 |
1149 | 유효응력 개념에 기초한 정상상태 및 Transient 크리프 거동에 관한 연구 = A study on the steady and transient creep behavior based on the effective stress conceptlink 이봉상; Lee, Bong-Sang; et al, 한국과학기술원, 1996 |
1150 | 의탄성 현상의 새로운 해석에 의한 반복 응력 크립 변형 기구에 관한 연구 = A Study on the cyclic creep deformation mechanism in terms of the newly interpreted anelasticitylink 주세돈; Choo, Se-Don; et al, 한국과학기술원, 1992 |
1151 | 의탄성회복현상으로 해석된 Cyclic creep 변형기구의 규명 = (The) interpretation of cyclic creep deformationmechanism in terms of the anelastic recoverylink 진근찬; Jin, Keun-Chan; et al, 한국과학기술원, 1982 |
1152 | 이상조직강에서 변태페라이트의 형성기구 및 특성에 관한 연구 = A study on the formation mechanisms and characteristics of transformed ferrite in a dual-phase steellink 정우창; Jeong, Woo-Chang; et al, 한국과학기술원, 1985 |
1153 | 이상조직강의 조직설계 및 기계적 성질에 관한 연구 = A study on the microstructural design and the mechanical properties of dual-phase steelslink 이준정; Yi, Joon-Jeong; 김인섭; 김영길; et al, 한국과학기술원, 1983 |
1154 | 이온빔 산화와 열 산화에 의해 형성된 Si(001)-SiO$_2$계면의 구조 = The structure of the Si(001)-SiO$_2$ interface formed by ion beam oxidation and thermal oxidationlink 김영필; Kim, Young-Pil; et al, 한국과학기술원, 1998 |
1155 | 이원계 셀레나이드 화합물의 진공증발을 이용한 $Cu(In,Ga)Se_2$ 태양전지의 제조 및 특성 = Fabrication and characterization of $Cu(In,Ga)Se_2$ solar cells by evaporating binary selenide compoundslink 이두열; Lee, Doo-Youl; et al, 한국과학기술원, 2002 |
1156 | 이종접합 고체전기화학식 수소센서의 응용에 관한 연구 = Applications of solid state electrochemical hydrogen sensor with heterojunction structurelink 김성완; Kim, Sweongwan; et al, 한국과학기술원, 2017 |
1157 | 이축압출기에서 비상용 이성분고분자계의 모폴로지 거동모사연구 = Development of computational model to predict blend morphology in a twin screw extruderlink 문도영; Moon, Do-Young; et al, 한국과학기술원, 1998 |
1158 | 이트리아-안정화 지르코니아 세라믹스의 이온전도특성에 관한 연구 = Ionic conduction characteristics of Yttria-stabilized Zirconia ceramicslink 김영호; Kim, Young-Ho; et al, 한국과학기술원, 1994 |
1159 | 인장에서 Hold time을 준 고온 저주파 피로수명에 미치는 크립 공동손상의 영향 = Effects of creep cavitation damage on high temperature low cycle fatigue life with tensile hold timelink 홍진완; Hong, Jin-Wan; et al, 한국과학기술원, 1985 |
1160 | 일렉트론 홀로그래피를 이용한 수직자화 L10 FePt 및 FePt:C 자성박막의 수직자구 조직 연구 = A study of perpendicular magnetic domain structure of perpendicularly magnetized L10 FePt and FePt:C magnetic thin films using electron holographylink 이완희; Lee, Wan-Heui; et al, 한국과학기술원, 2013 |
1161 | 일방향응고 TiAl-Nb-Si-C 합금의 열적안정성 및 파괴인성 = Thermal stability and fracture toughness of directionally solidified TiAl-Nb-Si-C alloyslink 김성웅; Kim, Seong-Woong; et al, 한국과학기술원, 2005 |
1162 | 입계편석된 인 (P) 이 강의 입계 부식, 응력 부식 및 수소 투과 성질에 미치는 영향 = Effects of grain bounfary segregation of phosphorus on the intergranular corrosion and stress corrosion cracking of mild steel and on the hydrogen permeation through Ni-Cr steellink 김기태; Kim, Ki-Tae; et al, 한국과학기술원, 1988 |
1163 | 입도분포에 다른 ZnO 바리스터의 비직선적 전압-전류 특성의 변화와 ZnO입자의 이방성에 관한 연구 = A study on the effects of grain size distribution on the nonlinear I-V characteristics of ZnO varistorslink 성건용; Sung, Gun-Yong; et al, 한국과학기술원, 1987 |
1164 | 입자강화형 타이타니움기 복합재료의 크리프 변형거동과 손상기구에 관한 연구 = A study on the creep deformation behavior and damage mechanism of particleate-reinforced ti based compositelink 이상인; Rhee, Sang-In; et al, 한국과학기술원, 2004 |
1165 | 자기기록 미디아용 박막의 미세조직 발달에 미치는 응력의 효과 = Effect of stress on the microstructural evolution of thin films for magnetic recording medialink 박권식; Park, Kwon-Shik; et al, 한국과학기술원, 1999 |
1166 | 자기기록매체용 FePt 자성박막의 자화조직 및 cluster 형성에 관한 연구 = Magnetization structure and cluster formation of fept thin film for magnetic recording medialink 김만철; Kim, Man-Cheol; et al, 한국과학기술원, 2008 |
1167 | 자동차 배기가스 NOx 저감장치를 위한 혼합전위 NOx 센서에 대한 연구 = Mixed potential NOx sensor for DeNOx system of automotive exhaustlink 박진수; Park, Jin-Su; et al, 한국과학기술원, 2008 |
1168 | 자동차용 microalloying 중탄소 열간단조강의 고온 유동곡선과 동적재결정 조직의 모델링에 관한 연구 = Modeling of the flow curves and dynamic-recrystallized microstructure of microalloyed medium carbon hot-forging steellink 김관욱; Kim, Kwan-Wook; et al, 한국과학기술원, 2014 |
1169 | 자발착화연소 및 초음파 분무연소 합성법을 이용한 Titanate계 분말합성에 관한 연구 = Synthesis for titanates powders by combustion synthesis and ultrasonic mist combustion synthesislink 정충환; Jung, Choong-Hwan; 김도경; 김종희; et al, 한국과학기술원, 2002 |
1170 | 자벽이동 및 수직 자기터널접합용 수직자기 이방성 물질 개발 = Development of perpendicular magnetic anisotropy materials for domain wall motion and perpendicular magnetic tunnel junctionlink 김선옥; Kim, Seon-Ock; et al, 한국과학기술원, 2011 |
1171 | 자장중 열처리가 Fe-B-Si 비정질 권철심의 자기적 성질에 미치는 영향 = Effects of magnetic annealing on the magnetic properties of amorphous Fe-B-Si wound coreslink 송재성; Song, Jae-Sung; 임호빈; 윤문수; et al, 한국과학기술원, 1991 |
1172 | 저압 다이아몬드 합성에서 Ni, Fe, Co, Pd 기판에서 형성되는 soot 형성기구와 합성 조건에 따른 다이아몬드의 성장 모양 변화 = Mechanism of soot-formation on Ni, Fe, Co and Pd substrates, and morphology variation of diamond with deposition conditions in CVD of diamondlink 허종무; Huh, Jong-Moo; et al, 한국과학기술원, 2000 |
1173 | 저압 다이아몬드 합성에서의 Charged cluster 모델 = The charged cluster model for low pressure synthesis of diamondlink 한준희; Hahn, Jun-Hee; et al, 한국과학기술원, 1995 |
1174 | 저온 소성 가능한 전구체 기반 산화물 박막트랜지스터 = Low temperature processable precursor based oxide thin-film transistorlink 황영환; Hwang, Young-Hwan; et al, 한국과학기술원, 2012 |
1175 | 저온 열처리 공정에 의한 LCD-TFT용 poly-Si 박막의 제조에 관한 연구 = A study on the fabrication of poly-Si films for LCD-TFT by low-temperature annealing processlink 김해열; Kim, Hae-Yeol; et al, 한국과학기술원, 2000 |
1176 | 저온 유도결합 플라즈마 산화에 의한 $Si/SiO_2$ 계면 특성과 박막트랜지스터 특성 변화 연구 = Effects of low-temperature inductively-coupled plasma oxidation on the characteristics of $Si/SiO_2$ interface and thin film transistorslink 김보현; Kim, Bo-Hyun; et al, 한국과학기술원, 2004 |
1177 | 저온에서 Al - Zn 합금의 불연속 석출 구동력에 관한 연구 = A study on the driving force of discontinuous precipitation in an Al - Zn alloy at low temperatureslink 정영훈; Chung, Young-Hoon; 윤덕용; 신명철; et al, 한국과학기술원, 1992 |
1178 | 저탄소강의 미세구조 평가를 위한 초음파감쇠와 후방산란 잡음신호 분석 = Analysis of ultrasonic attenuation and backscattering noise for microstructure evaluation of low carbon steelslink 안봉영; Ahn, Bong-Young; et al, 한국과학기술원, 1998 |
1179 | 저합금강의 duplex coating에서 black layer 형성기구 및 계면구조가 밀착력에 미치는 영향에 관한 연구 = A study on the formation mechanism of black layer and the effect of Interfacial microstructure on the adhesion of duplex coating of low alloy steellink 백운승; Baek, Woon-Seung; et al, 한국과학기술원, 1998 |
1180 | 적색 무기전계발광 형광체의 개발 및 백색 분산형 무기 전계발광 소자의 특성 향상 = Electroluminescence enhancement of white ACPEL device by the development of red emitting EL phosphor and the modification of device structurelink 박봉제; Park, Bong-Je; et al, 한국과학기술원, 2010 |
1181 | 적층형 전구체의 중간열처리를 통한 void-free $Cu_2 SnS_3$와 $Cu_2 ZnSn(S,Se)_4$ 박막 성장 연구 = Growth of a void-free$Cu_2 SnS_3$ and $Cu_2 ZnSn(S,Se)_4$ films using stacked precursors through intermediate temperature pre-annealing and sulfurizationlink 고영민; Ko, Young Min; et al, 한국과학기술원, 2017 |
1182 | 전계 펄스 인가 증발 방법을 이용한 $Ge_2Sb_2Te_5$ 나노 구조물에 관한 연구 = Controlled $Ge_2Sb_2Te_5$ nanostructures fabricated by Electrical Pulse Induced Evaporation (EPIE) methodlink 김현정; Kim, Hyun-Jung; et al, 한국과학기술원, 2009 |
1183 | 전기 화학적 방법에 의한 두개의 층(Fe/전기 도금층Ni, Fe/전기 도금층 Cr,Fe/ 부동태 산화 피막) 을 통한 수소 투과 거동에 관한 연구 = Hydrogen transport through bilayers of Fe/electrodeposited Ni,Fe/electrodeposited Cr and Fe/passivating oxide film by electrochemical methodslink 송락현; Song, Rak-Hyun; et al, 한국과학기술원, 1989 |
1184 | 전기화학적 선택부식을 이용한 연료전지시스템의 고효율 수소생성용 금속간화합물 촉매박판재의 개발 = Development of foil catalysts of intermetallic compounds by electrochemical selective dissolution for highly efficient hydrogen production in the fuel cell systemlink 이혜연; Lee, Hye-Youn; et al, 한국과학기술원, 2011 |
1185 | 전위구조의 비교관찰을 통한 반복응력 크립가속화 기구 및 가속화 임계조건에 관한 연구 = A study on the mechanism and criterion of cyclic creep acceleration interms of dislocation structureslink 이재곤; Lee, Jae-Kon; et al, 한국과학기술원, 1988 |
1186 | 전자 패키징에서 구리 박막의 접착력에 관한 연구 = A study on the adhesion of Cu thin films in microelectronics packaginglink 정태경; Chung, Tae-Gyeong; et al, 한국과학기술원, 1993 |
1187 | 전자기장을 이용한 레이들 내 와류 억제 및 용융금속의 속도 측정에 관한 연구 = A study on the suppression of the vortex in ladle and the measurement of melt velocity by electromagnetic fieldlink 서준원; Suh, Jun-Won; et al, 한국과학기술원, 2000 |
1188 | 전자부품 실장용 Sn-Ag-X 계 솔더 합금의 계면 현상과 특성 평가 = Interfacial phenomena and characterization of Sn-Ag-based solder alloy systems for electronic packaginglink 최원경; Choi, Won-Kyoung; et al, 한국과학기술원, 2001 |
1189 | 전자빔 손상이 n-MOSFET의 전기적 특성에 미치는 영향 = Effects of electron beam damage on the electrical characteristics of n-MOSFETslink 전영진; Jeon, Young-Jin; et al, 한국과학기술원, 1994 |
1190 | 전자패키지용 Sn-Ag-Cu계 무연 솔더 접합부의 금속간 화합물 성장과 전단강도에 미치는 냉각속도의 영향 = Effect of cooling rate on growth of IMC and shear strength of near eutectic Sn-Ag-Cu solder jointlink 정상원; Jeong, Sang-Won; et al, 한국과학기술원, 2004 |
1191 | 전자패키징용 $SiC_p/Al$ 금속복합재료의 제조공정 및 열적특성 = Fabrication process and thermal properties of $SiC_p/Al$ metal matrix composites for electronic packaging applicationslink 이효수; Lee, Hyo-Soo; et al, 한국과학기술원, 2002 |
1192 | 전자패키징용 복합 솔더에서 Cu/Ni 비율에 따른 금속간 화합물의 형성과 특성 평가에 관한 연구 = A Study of the effect of the Cu/Ni ratio on formation of intermetallic compounds and evaluation of reliability in the Cu-Ni-bearing composite solderslink 이주원; Lee, Joo-Won; et al, 한국과학기술원, 2006 |
1193 | 전착법 및 진공증착으로 제작한 CdS박막의 전기 및 광학적 특성에 관한 연구 = Electrical and optical properties of CdS thin films prepared by electrodeposition and vacuum evaporationlink 김시열; Kim, Shi-Yul; et al, 한국과학기술원, 1993 |
1194 | 전착법에 의한 니켈박판의 양축집합조직화에 관한 연구 = A study on the biaxial texturing of nickel sheet by electrodepositionlink 이규환; Lee, Kyu-Hwan; et al, 한국과학기술원, 2003 |
1195 | 졸-겔법에 의한 단분산의 구형 SiC 분말 제조에 관한 연구 = A study on the monosized spherical SiC powder preparation by Sol-Gel methodlink 석인식; Seog, In-Sig; et al, 한국과학기술원, 1993 |
1196 | 졸-겔법으로 제조된 유기 수식체가 첨가된 Germanosilicate 유리에서의 높은 광민감성 = High photosensitivity of the Sol-Gel derived organically modified germanosilicate (ORMOGSIL) glasseslink 장재혁; Jang, Jae-Hyeok; et al, 한국과학기술원, 2003 |
1197 | 졸-겔법으로 제조한 강유전체 $(Sr,Ba)Nb_2O_6$ 박막의 광특성 및 제 2 고조파 발생 효과 = Optical Chracteristics and SHG Effect of Ferroelectric $(Sr,Ba)Nb_2O_6$ Films Prepared by Sol-Gel Methodlink 구준모; Koo, Jun-Mo; et al, 한국과학기술원, 2001 |
1198 | 졸-겔법을 통해 제조된 $LiCoO_2$ 박막정극의 전기화학적 특성 = The electrochemical properties of $LiCoO_2$ thin film cathode prepared by sol-gel processlink 김문규; Kim, Mun-Kyu; et al, 한국과학기술원, 2002 |
1199 | 졸겔 PLZT박막의 상형성과 강유전 및 광도파특성 = Phase formation, and ferroelectric and waveguiding characteristics of sol-gel PLZT thin filmslink 윤대성; Yoon, Dae-Sung; et al, 한국과학기술원, 1996 |
1200 | 주석-다중벽 탄소나노튜브 나노복합재료의 열전도 특성과 Eu 이온 첨가에 따른 음극선 발광 특성 = Thermal conducting property and eu ion assisted cathodoluminescence of Sn-multiwalled carbon nanotube nanocompositeslink 이정섭; Lee, Jung-Sub; et al, 한국과학기술원, 2008 |