1007 | "S" cam brake noise at low speed = 低回轉時의 S-캠 브레이크의 騷音分析link Jeon, Sang-Bok; 전상복; et al, 한국과학기술원, 1983 |
1008 | SA106 Gr.C 배관재의 파괴인성치에 미치는 동적변형시효의 영향 = Effect of dynamic strain aging on fracture toughness fo SA106 Gr.C piping steellink 김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1997 |
1009 | Scanline resolution-invariant depth completion using a single image and sparse LiDAR point cloud = 단일 이미지와 LiDAR 점구름을 이용한 LiDAR-채널 해상도에 불변한 깊이추정방법link Ryu, Kwonyoung; Yoon, Kuk-Jin; et al, 한국과학기술원, 2021 |
1010 | SCARA형 로보트에 대한 최적 설계 = Optimal design to the SCARA-type robotlink 강봉수; Kang, Bong-Soo; et al, 한국과학기술원, 1993 |
1011 | SCARA형 직접 구동 방식 로봇 시스템에 대한 동역학적 모델의 개발과 응용에 관한 연구 = Study on the development and application of the dynamic model for a SCARA type direct drive robot systemlink 홍윤식; Hong, Yoon-Shik; et al, 한국과학기술원, 1995 |
1012 | Scattering pattern of acoustic cloak in compressible non-uniform mean flow = 압축성 비균일 평균 유동을 고려한 음향 투명망토의 산란 패턴link Ryoo, Hyeonbin; Jeon, Wonju; et al, 한국과학기술원, 2017 |
1013 | Schlieren 기법을 이용한 2유체 연료분사 장치의 연료분포에 관한 가시화 연구 = A visualization study on fuel distribution from air-assisted fuel injector by schlieren techniquelink 이경민; Lee, Kyung-Min; et al, 한국과학기술원, 1993 |
1014 | SCM-4 강의 반복특성 및 저수명 피로 = Cyclic properties and low-cycle fatigue on SCM4 steellink 강대윤; Kang, Dae-Yoon; et al, 한국과학기술원, 1981 |
1015 | SCM4 의 동파괴 인성치에 관한 실험적 연구 = An experimental investigation on the dynamic fracture toughness of SCM4link 민운식; Min, Un-Sig; et al, 한국과학기술원, 1985 |
1016 | SCM440의 선삭에서 윤활조건과 테이퍼 각에 따른 가공성 평가에 관한 연구 = A study on the machinability evaluation according to lubrication conditions and taper angle for turning of SCM440link 최민석; Choi, Min-Seok; 이병채; Lee, Byung-Chai; et al, 한국과학기술원, 2014 |
1017 | SEA를 이용한 한 면이 탄성판인 직방형상자의 복사저항의 계산 = Simulation of the radiation resistancefor a parallel-piped box with a side of the elastic plate by using the SEA methodlink 임종윤; Lim, Jong-Yun; 엄윤용; 이병호; et al, 한국과학기술원, 1990 |
1018 | SEDRIS 기반의 국방 모의체계 합성환경 데이터베이스의 상호운용성 = Interoperability of synthetic environment database in defense simulation system based on SEDRISlink 김형기; Kim, Hyung-Ki; et al, 한국과학기술원, 2011 |
1019 | SEDRIS를 이용한 디지털 생산 시뮬레이션 환경의 융합 = Fusion of digital manufacturing simulation environment using SEDRISlink 문홍일; Moon, Hong-Il; et al, 한국과학기술원, 2004 |
1020 | Selective surface modification of silicon nanowires by using nanoscale joule heating and its sensor application = 나노스케일 줄 가열을 이용한 실리콘 나노와이어의 선택적 표면 개질 및 센서에의 응용link Yun, Jeong-Hoon; 윤정훈; et al, 한국과학기술원, 2013 |
1021 | Self-assembled nanostructures via nanosphere lithography and their application to gas sensors = Nanosphere 리소그래피를 통한 자기 조립 나노 구조 및 가스 센서로써의 응용link Gao, Min; Park, In Kyu; et al, 한국과학기술원, 2017 |
1022 | SEM을 이용한 미세접합 및 모니터링 시스템 개발에 관한 연구 = A study on the development of SEM applied microjoining and monitoring systemlink 황일한; Hwang, Il-Han; et al, 한국과학기술원, 2003 |
1023 | Sensor design and method to estimate the interaction forces between the instrument of the surgical robot and the tissues = 수술 로봇의 기구와 인체 조직과의 상호작용 힘을 간접적으로 추정하는 방법과 센서의 설계link Kim, Suyong; Lee, Doo Yong; et al, 한국과학기술원, 2017 |
1024 | Separation of optically different particles in a cross-type optical particle separator = Cross-type optical particle separator 내에서 광학적 특성이 다른 입자의 분리link Jung, Eun-Jung; 정은정; et al, 한국과학기술원, 2008 |
1025 | Separation of two-different-sized microparticles inside moving droplets with travelling surface acoustic waves = 진행표면탄성파를 활용한 움직이는 액적 내부의 크기가 다른 두 마이크로입자 분리link Park, Kwangseok; Sung, Hyung Jin; et al, 한국과학기술원, 2018 |
1026 | Shadow mask의 열변형 해석 = Thermal deformation analysis of a shadow masklink 김현규; Kim, Hyeon-Gyu; et al, 한국과학기술원, 1993 |
1027 | Shank shock absorption mechanism of a powered exoskeleton for reduction of ground impact = 정강이 충격 흡수 메커니즘을 사용한 외골격 로봇의 지면 충격 저감link Park, Jeongsu; Kong, Kyoungchul; et al, 한국과학기술원, 2021 |
1028 | Shape and pose estimation of a skeleton in X-ray images using statistical shape and intensity model = 두방향 엑스선영상에서의 통계 형상 및 세기 모델을 이용한 자세 추정link Oh, Jeongseok; Koo, Seungbum; et al, 한국과학기술원, 2021 |
1029 | Shape effect on flapping dynamics of an inverted flag in a uniform flow = 균일 유동 내 역방향 깃발의 플래핑 운동에 깃발 형상이 미치는 영향link Park, Jeong Woo; Sung, Hyung Jin; et al, 한국과학기술원, 2019 |
1030 | Shape optimal design of a torsion bar and clamped beams using boundary element method = 경계요소법을 이용한 비틀림 축과 고정보의 형상최적설계link Lee, Choon-Yeol; 이춘열; et al, 한국과학기술원, 1985 |
1031 | Shear bonding strength of cement -bone interface under compression = 압축응력 하에서의 시멘트와 뼈의 경계면의 전단 접착 강도에 관한 연구link Song, Han-Nah; 송한나; et al, 한국과학기술원, 2002 |
1032 | Shift link 용 자동유도 brazing 기구의 설계 및 제작 = Design & manufacture of automatic induction brazing machine for shift linklink 조용주; Cho, Yong-Joo; et al, 한국과학기술원, 1979 |
1033 | SI 엔진의 성능, 배출가스, EGR 효과의 예측을 위한 cycle simulation 에 관한 연구 = A study on the SI engine cycle simulation for predicting performance, emission and EGR effectlink 정용일; Jeong, Yong-Il; et al, 한국과학기술원, 1985 |
1034 | SIAF 수치해법을 사용한 압축성 내부 유동장 해석 = Analysis of compressible internal flows using scalar implicit approximate factorization algorithmlink 서승원; Seo, Seung-Won; et al, 한국과학기술원, 1992 |
1035 | Signal imaging with gramian angular field based on the current signal and envelopes for anomaly detection of rotating machine = 회전기계 이상진단을 위한 전류신호와 포락선을 이용한 위상공간 이미지화 기법link Yun, Sung Hyun; 윤성현; et al, 한국과학기술원, 2024 |
1036 | SIL(solid immersion lens)을 이용한 근접장 마이크로스코프의 제작및 설계에 관한 연구 = Design and fabrication of near-field microscope using solid immersion lenslink 윤형길; Yoon, Hyoung-Kil; et al, 한국과학기술원, 2000 |
1037 | Silicon integrated nanolaser by nanobeam transfer printing = 나노 빔 전사 인쇄를 이용한 실리콘 혼성 나노 레이저link Son, Jae-Hyeon; 손재현; et al, 한국과학기술원, 2014 |
1038 | Simplified distortion analysis for multi-pass welding using layered shell elements based on inherent strain = 고유변형도 기반 Layered Shell 요소를 활용한 다층용접변형 간이 해석방법link Perrera, Diego; 페레라, 디에고; et al, 한국과학기술원, 2016 |
1039 | Simulated solution for the heterogeneous pallet loading problem and application with a robotic manipulator = 로봇 매니풀레이터를 이용한 다양한 크기를 갖는 팔레트의 적재 문제에 대한 시뮬레이션 및 실험적 연구link Zappa, Isacco; Kim, Jung; et al, 한국과학기술원, 2021 |
1040 | Simulation for surgery planning for the proximal femur fracture = 대퇴골 상부 골절의 수술 계획을 위한 시뮬레이션link Jung, Hae-Lyong; 정회룡; et al, 한국과학기술원, 2007 |
1041 | Simulation of an aortic heart valve in a pulsatile flow = 맥동 유동장에서 대동맥 심장 판막의 수치해석link Bikramaditya, Neeraj; Bikramaditya, N.; et al, 한국과학기술원, 2010 |
1042 | Simulation of an energy harvesting eel by the immersed boundary method = 가상 경계 방법을 이용한 에너지를 모으는 뱀장어의 수치해석link Jung, Ki-Sung; 정기성; et al, 한국과학기술원, 2009 |
1043 | Simulation of cerebrovascular perfusion using realistic synthetic tree generation = 미소 혈관 생성 모델을 이용한 뇌혈관계 관류 해석link Rundfeldt, Hans Christian; Kim, Hyun Jin; 김현진; Sung, Hyung Jin; et al, 한국과학기술원, 2023 |
1044 | Simultaneous bi-material electrodeposition of Cu/Zn for anode current collectors in lithium metal batteries = 구리/아연 이종 소재 동시 전기 증착 공정을 통한 리튬 금속 전지 음극 집전체 제작 연구link Won, Dong yeon; 원동연; et al, 한국과학기술원, 2024 |
1045 | Single domain generalization for LiDAR point cloud semantic segmentation = 라이다 점구름의 의미론적 분할을 위한 단일 도메인 일반화link Kang, Yoonsu; Yoon, Kuk-Jin; et al, 한국과학기술원, 2023 |
1046 | SiO2 나노입자가 코팅된 표면에서의 풀 비등 특성 = Pool boiling characteristic of SiO2-nanoparticle-coated surfacelink 김상우; Kim, Sang-Woo; et al, 한국과학기술원, 2013 |
1047 | Size-controllable patterning using physical vapor jet printing = 물리적 증기젯 인쇄 방법에서 패터닝 크기 조절link Lee, Yongjun; 이용준; et al, 한국과학기술원, 2015 |
1048 | SI엔진의 내부 잔류가스율 예측 = Estimation of residual gas fraction in spark-ignition engineslink 장진영; Jang, Jin-Young; et al, 한국과학기술원, 2003 |
1049 | SI엔진의 배기 유동 특성 : 순간적인 Gas 농도 관찰을 통한 실화 감지 = Characteristics of exhaust flow in a SI engine : misfire detection by measuring and calculating instantaneous gas concentration in exhaust manifoldlink 김형현; Kim, Hyung-Hyun; et al, 한국과학기술원, 1998 |
1050 | Slit 근방의 stokeslet 에 의한 2차원의 느린 점성 유동 = Two-dimensional slow viscous flow due to a stokeslet near a slitlink 고형종; Ko, Hyung-Jong; et al, 한국과학기술원, 1983 |
1051 | SMC 압축 성형 공정에서의 비등방성 열유동 모델링 및 유한 요소 해석 연구 = Modeling and finite element analysis of anisotropic flow in SMC compression moldinglink 이응식; Lee, Eung-Shik; et al, 한국과학기술원, 1994 |
1052 | SMC 압축 성형 공정에서의 열변형에 관한 유한 요소 해석 = Finite element analysis of thermally-induced deformation in SMC compression moldinglink 이재형; Lee, Jae-Hyoung; et al, 한국과학기술원, 1996 |
1053 | SMC 압축성형공정의 3차원 유한요소 해석 = Three dimensional finite element analysis of compression molding of sheet molding compoundlink 김수영; Kim, Soo-Young; et al, 한국과학기술원, 1995 |
1054 | SMC 압축성형에서의 열 및 유동에 관한 연구 = An experimental study on heat transfer and flow in compression molding of SMClink 김기택; Kim, Ki-Taek; et al, 한국과학기술원, 1994 |
1055 | Snap-through dynamics of tandem flexible sheets in a uniform flow = 단일유동 내 나란히 배열된 두 탄성시트의 스냅스루 운동link Kim, Junsoo; Kim, Daegyoum; et al, 한국과학기술원, 2020 |
1056 | SOFC system 내부의 판형 열교환기 성능해석 = Performance analysis of multichannel plate heat exchanger in SOFC systemlink 조상범; Cho, Sang-Beom; et al, 한국과학기술원, 2009 |
1057 | Soft gripper with electro-adhesion based on dielectric elastomer actuator = 유전 탄성체 구동기 및 전기 접착력 기반 소프트 그리퍼 설계link Hwang, Geonwoo; Kyung, Ki-Uk; et al, 한국과학기술원, 2019 |
1058 | Solution of parabolized navier-stokes equations for two dimensional incompressible laminar flow with separation bubble = 박리기포를 수반하는 이차원 비압축성 층류 유동의 준타원형 navier-stokes 방정식의 해link Kang, Dong-Jin; 강동진; et al, 한국과학기술원, 1987 |
1059 | Sound field reproduction for reduction of pre-echo artifacts based on time-domain weighted least-squares method = 프리에코 감소를 위한 시간 영역의 가중 최소 제곱법을 적용한 음장 재현 기법link Lee, Jung-Min; 이정민; Park, Young-Jin; 박영진; et al, 한국과학기술원, 2013 |
1060 | Sound radiation from a circular plate having an elastic edge beam and a ring mass in fluid = 유체내에서의 환형 질량과 탄성 테두리 보를 가진 원판으로 부터의 음압 복사link Kim, Seok-Il; 김석일; et al, 한국과학기술원, 1983 |
1061 | Sound transmission loss of double panels with sound absorptive facings and with internal corrugations of plastics = 흡음재를 표면에 부착시킨 이중격벽과 내부에 플라스틱 주름을 삽입한 이중격벽의 차음효과link Lee, Sung-Il; 이성일; et al, 한국과학기술원, 1980 |
1062 | Source-pulsation vortex simulation of turbulentseparation bubbles with sinusoidal perturbations = 주기적 국소교란이 있는 난류박리유동의 이산와류 수치해석link Chung, Yong-Man; 정용만; et al, 한국과학기술원, 1993 |
1063 | Space-time characteristics of wall pressure and shear-stress fluctuations in a turbulent boundary layer = 난류 경계층 내의 벽압력 및 벽면마찰 섭동량의 시공간적 특성link Kim, Joong-Nyon; 김중년; et al, 한국과학기술원, 2000 |
1064 | Spanwise behavior of large-scale motions in turbulent minimal pipe flow = 미니멀 파이프 유동 내 대형 구조의 횡 방향 거동 특성link Han, Juhyung; Sung, Hyung Jin; et al, 한국과학기술원, 2019 |
1065 | Spatial organization of coherent structures in a turbulent boundary layer = 난류 경계층 내 응집구조의 공간구성link Hwang, Jin-Yul; 황진율; et al, 한국과학기술원, 2014 |
1066 | Spectral and correlation analysis of hypoid gear vibration and noise = 하이포이드 기어 진동과 소음의 스펙트럼 및 상관관계 분석link Seo, Seong-Ho; 서성호; et al, 한국과학기술원, 1983 |