2341 | 선삭 가공에서의 칩 및 채터 감지에 관한 연구 = A study on chip and chatter monitoring in turning processlink 이석원; Lee, Seok-Won; et al, 한국과학기술원, 1993 |
2342 | 선삭가공용 자동 프로그래밍 시스템의 개발에 관한 연구 = A study on the development of automatic programming system for turninglink 이성찬; Lee, Sung-Chan; et al, 한국과학기술원, 1993 |
2343 | 선삭작업에서의 절삭과정 모델링과 비례-적분 적응 제어기의 적용에 관한 연구 = Modeling of cutting process and adaptive PI control in turninglink 안태길; Ahn, Tae-Kil; et al, 한국과학기술원, 1987 |
2344 | 선재 압연 공정의 표면결함 저감을 위한 공정설계 기술 = Process planning for reduction of surface defect formation in bar rollinglink 김학영; Kim, Hak-Young; et al, 한국과학기술원, 2005 |
2345 | 선정된 자유도에서 측정된 주파수 응답 함수를 이용한 유한 요소 모형 개선 = FE model tuning using the measured FRFs at selected DOFslink 김성일; Kim, Sung-Il; et al, 한국과학기술원, 1998 |
2346 | 선체대조립공정을 위한 용접이동로봇시스템의 경로계획과 제어에 관한 연구 = A study on path planning and control of welding mobile manipulator for assembly process in shipbuildinglink 김진덕; Kim, Jin-Deok; et al, 한국과학기술원, 1999 |
2347 | 선택저장 자료구조를 이용한 복합다양체 모델의 불리언 작업 = Boolean operation of non-manifold model with the data structure of selective storagelink 유병현; Yoo, Byoung-Hyun; et al, 한국과학기술원, 1999 |
2348 | 선택적 membrane/shell 요소를 이용한 2차원 스트레칭 공정의 탄소성 유한요소해석 = Elastic-plastic finite element analysis of 2-D stretch forming by using the selective membrane/shell elementslink 정상보; Jung, Sang-Bo; et al, 한국과학기술원, 1991 |
2349 | 선택적 내부 전착이 가능한 마이크로/나노 복합 리튬-금속 배터리 음극구조에 대한 연구 = Structurally tailored hierarchical anode surface for selective inward lithium growth in lithium-metal batterylink 양인영; 김산하; et al, 한국과학기술원, 2021 |
2350 | 선택적 산화반응을 위한 산화구리 촉매 지지체의 가돌리늄 담지 효과에 관한 연구 = Study about the effect of gadolinium doping on support of copper oxide catalyst for preferential oxidationlink 오지우; Oh, Ji-Woo; et al, 한국과학기술원, 2014 |
2351 | 선향적 저감 적분을 이용한 탄소성 유한 요소법에 의한 박판 성형 해석 = Elasto-plastic finite element method with directional reduced integration in sheet metal forminglink 한수식; Han, Soo-Sik; 김승우; 허훈; et al, 한국과학기술원, 1989 |
2352 | 선형 및 회전운동 자극에서의 HMD (Head Mounted Display) 시스템 시간지연에 의한 멀미의 영향 고찰 = Study on motion sickness in HMD (head mounted display) system latency under rotation and translation stimuluslink 이은강; 박수경; et al, 한국과학기술원, 2017 |
2353 | 선형 시스템의 정량적 보상능력 지표 = Quantitative measures of compensation capabilities of linear systemslink 이해민; Lee, Hae-Min; et al, 한국과학기술원, 2011 |
2354 | 선형 유한요소 모델에 대한 절점응력 계산 및 천연색 응력 분포도 = Calculation of nodal stresses in finite element model with linear elements and stress contour display with colorlink 김준오; Kim, Jun-O; et al, 한국과학기술원, 1987 |
2355 | 선형 음향 탐촉자를 이용한 방사음 예측 방법에 대한 연구 = Prediction of radiation sound pressure using line array microphonelink 박순홍; Park, Soon-Hong; et al, 한국과학기술원, 1996 |
2356 | 선형계에서의 소음/진동원 규명을 위한 부분 기여도 함수 적용상의 문제점 = Pitfalls in the use of PCF for noise/energy source identification in linear systemslink 박정석; Park, Jung-Seok; et al, 한국과학기술원, 1988 |
2357 | 선형분무노즐에서 분사되는 에폭시계 도료의 분열기구 및 입경분포에 관한 실험적 연구 = An experimental study on breakup mode and drop size distribution of epoxy paint spray discharging from fan spray nozzlelink 강승익; Kang, Seung-Ik; et al, 한국과학기술원, 2007 |
2358 | 선회 화염의 구조에 관한 실험적 연구 = An experimental study on the structure of flame with swirling flowlink 명현국; Myong, Hyon-Kook; et al, 한국과학기술원, 1982 |
2359 | 선회화염의 일산화질소 생성에 관한 실험적 연구 = An experimental study on the nitric oxide formation of flame with swirling flowlink 윤재건; Yoon, Jae-Kun; et al, 한국과학기술원, 1983 |
2360 | 설치류 뇌졸중 모델의 실시간 모니터링을 위한 광 간섭 단층 촬영 기반 선별적 광 혈전성 혈관 폐쇄 시스템의 개발 = Development of targeted photothrombotic vessel occlusion system for real-time monitoring of vessel specific rodent stroke model using optical coherence tomographylink 주종윤; 오왕열; et al, 한국과학기술원, 2018 |
2361 | 섬모번들의 반 강성, 적응 메커니즘을 통합한 증폭메커니즘의 기계적 모델링 = Mechanical modeling of stereocilia's amplifying mechanism by combining negative stiffness and adaptationlink 이창원; Lee, Chang-Won; et al, 한국과학기술원, 2011 |
2362 | 섬유강화 고부복합재 공기스프링의 3차원 유한요소 해석 = Three-dimensional finite element analysis of air springs with fiber-reinforced rubber compositeslink 신진원; Shin, Jin-Won; et al, 한국과학기술원, 2000 |
2363 | 섬유강화복합재 손상 모델의 적분형 비국부 모델링 = Integral-type nonlocal modelling of fiber reinforced composite damage modellink 박준용; 윤정환; et al, 한국과학기술원, 2018 |
2364 | 섬유보강 고무모재 복합재료의 기계적 물성치 결정 = Characterization of the mechanical properties of fiber-reinforced rubber-matrix composite materialslink 안형택; Ahn, Hyung-Taek; et al, 한국과학기술원, 1999 |
2365 | 섭동 라그랑지안 방법을 이용한 2차원 접착 문제의 해석 = Analysis of 2-D bonding problems using perturbed lagrangian methodlink 김윤혁; Kim, Yoon-Hyuk; et al, 한국과학기술원, 1994 |
2366 | 성능 신뢰도를 고려한 개회로 기구의 최적 공차 할당에 대한 연구 = A study on the optimal tolerance allocation for open linkage systems based on the performancereliabiliy indexlink 김정; Kim, Jeong; et al, 한국과학기술원, 1991 |
2367 | 성형 사출기의 공정제어에 관한 연구 = A study on process control of the injection molding machinelink 정연규; Chung, Yeon-Gyu; et al, 한국과학기술원, 1979 |
2368 | 성형공정의 자유 경계면 접촉에 관한 유한요소해석 = A finite element analysis of forming processes with free surface contact algorithmlink 한영원; Hahn, Young-Won; et al, 한국과학기술원, 1995 |
2369 | 세 개의 원호를 이용한 자동 평행주차 시스템 개발 = Development of an automatic parallel parking system using three arcslink 김경식; Kim, Kyoung-Sik; et al, 한국과학기술원, 2009 |
2370 | 세개의 가속도계를 이용한 관내 유량 측정 방법 = Three accelerometer method for the measurement of flow rate in pipelink 김영기; Kim, Young-Key; et al, 한국과학기술원, 1995 |
2371 | 세라믹 사출형성에서 게이트 크기의 효과 = Effect of gate size on ceramic injection moldinglink 이상찬; Lee, Sang-Chan; et al, 한국과학기술원, 1991 |
2372 | 세라믹 사출형성을 위한 질화규소 미세 분말의 혼합성능에 대한 특성 연구 = Characterization of mixing performance of $Si_3N_4$ fine powder for ceramic injection moldinglink 고진; Ko, Jin; et al, 한국과학기술원, 1990 |
2373 | 세라믹 사출형성을 위한 혼합에 대한 연구 = A study on mixing for ceramic injection moldinglink 장인철; Chang, In-Cheol; et al, 한국과학기술원, 1991 |
2374 | 세라믹 여과재를 사용하는 집진장치내의 기체-고체입자 이상유동의 3차원 해석 = Three-dimensional analysis of a Gas-Solid two-phase flow in a ceramic-filter unitlink 이희술; Lee, Hee-Sool; et al, 한국과학기술원, 2000 |
2375 | 세라믹의 크리이프 피드 연삭특성에 관한 연구 = A study on the characteristics of creep feed grinding of ceramicslink 정진달; Cheong, Chin-Dal; et al, 한국과학기술원, 1992 |
2376 | 세미-액티브 3륜 틸팅 차량을 위한 노면 추정 및 제어 = Road angle estimation and control for three wheeled semi-active tilting vehiclelink 정기철; 최세범; et al, 한국과학기술원, 2017 |
2377 | 세탁기 현가장치의 동적 해석 및 설계에 관한 연구 = A study on the dynamic analysis and design of a washer suspension systemlink 장진호; Chang, Jin-Ho; et al, 한국과학기술원, 1997 |
2378 | 세탁기의 소음원 규명 및 저감을 위한 실험적연구 = An experimental study of noise source identification and level reduction of a washing machinelink 서희선; Seo, Hee-Seon; et al, 한국과학기술원, 1991 |
2379 | 세탁조의 동적 응답을 고려한 현가 장치의 설계 분석 연구 = A parametric design study of a washing machine suspension considering dynamic responseslink 김채원; Kim, Chae-Won; et al, 한국과학기술원, 1996 |
2380 | 소각로내 폐기물층 연소 및 열유동 특성 연구 = A study on the waste bed combustion and the thermal flow characteristics in the incineratorlink 고영건; Go, Young-Gun; et al, 한국과학기술원, 2002 |
2381 | 소결 금속의 압출에 관한 연구 = A study on the extrusion of sintered porous metallink 이정근; Lee, Jeong-Keun; 양동열; 오흥국; et al, 한국과학기술원, 1983 |
2382 | 소결금속의 링 압축에 관한 연구 = A study on the ring compression of porous metallink 문재호; Mun, Jae-Ho; 엄윤용; 오흥국; et al, 한국과학기술원, 1982 |
2383 | 소동물 혈관 내 흐르는 혈구의 산소 포화도를 이미징 할 수 있는 분광 DBFI 시스템 개발 = Development of spectroscopic DBFI (direct blood cell flow imaging) system for imaging oxygenation level of flowing blood cells in small animal modellink 엄태국; 오왕열; et al, 한국과학기술원, 2023 |
2384 | 소방 로봇 원격 제어를 위한 영상 강화 기법 = A vision enhancement technique for remote control of fire fighting robotslink 박경빈; Park, Kyung-Bin; et al, 한국과학기술원, 2008 |
2385 | 소방호스 힘-가이드 조립작업을 위한 수정된 퍼터베이션/코릴레이션 방법에 관한 연구 = A study on the modified perturbation/correlation method for fire hose force-guided assemblylink 오재성; Oh, Jaesung; et al, 한국과학기술원, 2015 |
2386 | 소성 가공에 있어서 변형 가시화법에 대한 연구 = A study on the visioplasticity method in the bulk deformationlink 배덕한; Bae, Duck-Han; et al, 한국과학기술원, 1984 |
2387 | 소성스핀을 수반하는 구성방정식을 갖는 탄소성 대변형의 유한요소 해석 = Finite element analysis of large elastic-plastic deformations with a constitutive equation involving plastic spinlink 강석우; Kang, Seok-Woo; et al, 한국과학기술원, 1989 |
2388 | 소음 주파수 추정 기법을 이용한 능동소음제어 알고리즘 = Active noise control algorithm based on noise frequency estimationlink 김선민; Kim, Sun-Min; et al, 한국과학기술원, 1998 |
2389 | 소음과 진동을 고려한 유도 전동기 프레임 시스템의 형상 최적화 연구 = A study of shape optimization of an induction motor frame system considering noise and vibrationlink 조태형; Cho, Tae-Hyoung; et al, 한국과학기술원, 1996 |
2390 | 소음평가와 대책 = Noise evaluation and controllink 임문혁; Im, Moon-Hyuk; et al, 한국과학기술원, 1980 |
2391 | 소재 물성 및 거동의 강건한 예측을 위한 DIC 데이터 처리 = DIC data management for the robust predictions of materials properties and behaviorslink 임헌용; 윤정환; et al, 한국과학기술원, 2022 |
2392 | 소형 가솔린 엔진의 소음저감을 위한 근접 차음상자의 설계 방법 및 적용 예 = Design method of close-fitting enclosure for noise reduction of small gasoline engine and its examplelink 이종찬; Lee, Jong-Chan; et al, 한국과학기술원, 2012 |
2393 | 소형 동전형 굽힘 피로시험기의 제작과 미소표면 균열 거동에 관한 연구 = Construction of small-sized, electro-dynamic type bending fatigue testing machine and preliminary study on small surface fatigue crack growthlink 임윤수; Im, Yoon-Soo; et al, 한국과학기술원, 1989 |
2394 | 소형 디젤 엔진에서 분사 전략 및 흡기 특성이 부분 예혼합 압축 착화 연소에 미치는 영향 = Effect of injection strategy and intake characteristics on the partially PCCI combustion in a small diesel enginelink 박영수; Park, Young-Soo; et al, 한국과학기술원, 2011 |
2395 | 소형 무인 잠수정의 자세 제어 구현에 관한 연구 = Experiment of attitude control for autonomous underwater vehiclelink 박진영; Park, Jin-Yeong; et al, 한국과학기술원, 2005 |
2396 | 소형 사각 보행 로봇의 설계 및 제작과 정적 걸음새의 구현 = Design and construction of small scale quadruped walking robot and realization of static gaitlink 배건우; Bae, Gun-Woo; et al, 한국과학기술원, 1996 |
2397 | 소형 연료전지 시스템을 위한 메탄화 공정을 이용한 일산화탄소 제거 방법에 대한 연구 = Study on carbon monoxide removal method for small-scale fuel cell applications using methanation processlink 조석호; 배중면; et al, 한국과학기술원, 2021 |
2398 | 소형 이동 로봇의 실시간 경로 계획과 영상 추적 제어에 관한 연구 = A study on real-time path planning and visual tracking of micro mobile robotlink 김은희; Kim, Eun-Hee; 오준호; 김수현; et al, 한국과학기술원, 1997 |
2399 | 소형 이동 로봇의 제작 및 자율적 군집 제어 시스템 설계 = Implementation of the collective control method for the autonomous mobile robotslink 장해섭; Jang, Hae-Seop; et al, 한국과학기술원, 1999 |
2400 | 소형 전동기의 고정자 동특성 예측을 위한 코일 다발의 등가 동적 모형화 = Equivalent dynamic modeling of coil bundle for prediction of dynamic properties of stator in small motorslink 은희광; Eun, Hee-Kwang; et al, 한국과학기술원, 2001 |