2101 | 미소 유체 진동자의 최적설계 = Optimum design of a micro-fluidic oscillatorlink 노유정; Noh, Yoo-Jeong; et al, 한국과학기술원, 2003 |
2102 | 미소 절삭에서의 절삭력 해석 = An analysis of cutting force in micromachininglink 김동식; Kim, Dong-Sik; et al, 한국과학기술원, 1993 |
2103 | 미소 채널에서 다단임팩터의 설계 및 성능평가 = Design and characterization of cascade impactor in a microchannellink 강준상; Kang, Joon-Sang; et al, 한국과학기술원, 2012 |
2104 | 미소고리형 진동자이로 및 하드 디스크 드라이브 스핀들계의 진동해석 = Vibration analysis of the ring type micromachined vibrating gyroscope and the HDD spindle systemlink 서정환; Seo, Jeong-Hwan; et al, 한국과학기술원, 1997 |
2105 | 미소절삭의 칩형성에 대한 연구 = A study on chip formation in micromachininglink 지창운; Jee, Chang-Woon; et al, 한국과학기술원, 1992 |
2106 | 미소표면피로균열진전에 미치는 가스환경의 영향에 관한 기초적 연구 = Preliminary study on effects of gaseous environments on small surface fatigue crack gorwthlink 오충석; Oh, Chung-Suk; et al, 한국과학기술원, 1990 |
2107 | 미지의 선형 시스템에 대한 출력 피드백 TDC/$H_∞$ 제어기 합성에 관한 연구 = A study on the output feedback TDC/$H_∞$ synthesis for the uncertain linear systemlink 김준식; Kim, Joon-Sik; et al, 한국과학기술원, 1994 |
2108 | 미케니컬 시일의 성능해석에 관한 연구 = A study on the analysis of mechanical seallink 김정훈; Kim, Jeong-Hun; et al, 한국과학기술원, 2006 |
2109 | 민감도 해석의 볼 베어링 상수 규명에의 이용 = Application of sensitivity analysis to identification of ball bearing coefficientslink 임완택; Rim, Wan-Teck; et al, 한국과학기술원, 1988 |
2110 | 밀도 재분배 알고리즘과 연계된 요소 제거 절차를 가진 균질화법에 의한 위상 최적화 연구 = A study on topology optimization by homogenization with an element elimination procedure combined with density redistribution algorithmlink 박종진; Park, Jong-Jin; et al, 한국과학기술원, 1996 |
2111 | 밀리구조물의 다자유도 변위 측정 장치 = Multi degrees of freedom displacement measurement system for milli-structurelink 배의원; Bae, Eui-Won; et al, 한국과학기술원, 2001 |
2112 | 밀링 가공시 주축 회전수를 고려한 절삭력 적응 제어 = Adaptive cutting force control for end milling by considering spindle's RPMlink 이경훈; Lee, Kyung-Hoon; et al, 한국과학기술원, 2002 |
2113 | 밀링 머신의 절삭력 제어를 통한 표면 굴곡도 향상에 관한 연구 = A study on the improvement of surface waviness by cutting force controllink 정충영; Jeong, Chung-Young; et al, 한국과학기술원, 1988 |
2114 | 밀링가공시 발생하는 공구마멸과 AE 신호에 관한 연구 = A study on the progressive tool wear and AE(Acoustic emission) signals in milling processlink 이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1987 |
2115 | 밀링용 3차원 공구 동력계의 설계 및 제작 = Design and manufacturing of 3-dimensional dynamometer for millinglink 박성하; Park, Sung-Ha; et al, 한국과학기술원, 1981 |
2116 | 밀집형 열교환기의 휜성능에 관한 수치적 연구 = Numerical investigation of fin performance for a compact heat exchangerlink 유재욱; You, Jae-Wook; et al, 한국과학기술원, 1998 |
2117 | 밀폐공간의 정상상태 자연대류에 있어서 용기형상의 영향 = Effect of a geometrical shape on steady-state natural convection in a cavitylink 김기빈; Kim, Gi-Bin; et al, 한국과학기술원, 1998 |
2118 | 밀폐된 동시회전디스크 사이의 유동에 장애물의 기하학적 변화가 미치는 영향 = Effect of the geometric change of an obstruction on the flow between shrouded corotating diskslink 하희운; Ha, Hui-Un; et al, 한국과학기술원, 2011 |
2119 | 밀폐된 자연 순환 회로에서의 2상 유동 = A two-phase flow in a closed natural convection looplink 장정민; Jang, Jung-Min; et al, 한국과학기술원, 1996 |
2120 | 밀폐용기의 위 판에 의해 구동되는 이층유체의 유동 = Lid-driven cavity flow of a two-layer liquid systemlink 배준호; Bae, Jun-Ho; et al, 한국과학기술원, 1999 |
2121 | 밀폐형 2상 자연 순환 회로의 유동 특성 = Flow characteristics of closed 2-phase natural circulation looplink 윤주웅; Yun, Ju-Ung; et al, 한국과학기술원, 1995 |
2122 | 바나듐 레독스 흐름 전지의 시스템 효율 향상을 위한 채널 가공된 카본페이퍼 전극에 관한 연구 = (A) study on carbon paper electrode with flow channel to enhance system efficiency for vanadium redox flow batterylink 오재형; 김성수; et al, 한국과학기술원, 2020 |
2123 | 바닥에 있는 싱크의 영향으로 인한 자유표면의 거동과 딥 생성 = Nonlinear transient free-surface flow and dip formation due to a sink at bottom walllink 추정호; Chu, Jeong-Ho; et al, 한국과학기술원, 1995 |
2124 | 바이모르프형 압전세라믹을 이용한 얇은 외팔보의 진동제어 = Vibration control of a thin cantilever beam by using a bimorph type of piezoelectric actuatorlink 윤해강; Youn, Hae-Kang; et al, 한국과학기술원, 1991 |
2125 | 바이모프의 생성 운동량을 이용한 압전 모터의 개발 = Development of piezoelectric motor using momentum generated by bimorphlink 최현도; Choi, Hyun-Do; et al, 한국과학기술원, 2004 |
2126 | 바이프리즘 스테레오 비젼 시스템을 이용한 GMA 용융지 형상 측정 = Measurement of GMA weld pool geometry using biprism stereo vision systemlink 이지혜; Lee, Ji-Hye; 유중돈; 나석주; et al, 한국과학기술원, 2000 |
2127 | 박막과 공동계의 저주파 특성 고찰 = The low frequency characteristics of a membrane-cavity systemlink 임종민; Im, Jong-Min; et al, 한국과학기술원, 1999 |
2128 | 박막과 음장의 연성을 이용한 덕트 소음 저감 방법 = Duct noise reduction by using membranelink 전종훈; Jeon, Jong-Hoon; et al, 한국과학기술원, 2004 |
2129 | 박막식 정수압 압출 공정에 있어서 임의의 형상의 압출에 대한 상계해 = An upper-bound solution for arbitrary shaped products on hydrofilm extrusion processlink 박태동; Park, Tae-Dong; et al, 한국과학기술원, 1985 |
2130 | 박막윤활하 Ball-on-disc 미끄럼접촉계에서의 표면거칠기 영향에 관한 연구 = A study on the effect of surface roughness in thin film at the ball-on-disc counterformal sliding contactlink 송응석; Song, Eung-Seok; et al, 한국과학기술원, 1986 |
2131 | 박판 금속 성형에서 드로우잉 힘에 대한 드로우 비이드의 효과에 대한 연구 = The effect of draw bead on drawing load in sheet metal drawinglink 나경환; Na, Kyoung-Whoan; et al, 한국과학기술원, 1982 |
2132 | 박판 성형을 위한 새로운 수치제어식 시작 방법의 개발 = Development of a new NC-controlled trial manufacturing process for sheet metal forminglink 조철훈; Cho, Cheol-Hoon; et al, 한국과학기술원, 1997 |
2133 | 박판 주조공정에서 공정의 특성 해석 및 공정 변수 선정에 관한 연구 = Analysis and parameter design of strip casting processeslink 배세철; Bae, Sei-Chul; 양동열; 조형석; et al, 한국과학기술원, 1997 |
2134 | 박판 페어의 기계적 접합을 위한 공정에 관한 연구 = Study on the mechanical joining process of a sheet metal pairlink 윤희주; Yoon, Hee-Ju; et al, 한국과학기술원, 2002 |
2135 | 박판금속성형에 있어서 곡선절곡에 관한 연구 = A study on curved line folding in sheet metal workinglink 이정우; Lee, Jeong-Woo; et al, 한국과학기술원, 1985 |
2136 | 박판금속의 단열 전단밴드 생성에 대한 실험 및 유한요소 해석 = Experiment and finite element analysis of the formation of adiabatic shear band in sheet metallink 임지호; Lim, Ji-Ho; et al, 한국과학기술원, 2000 |
2137 | 박판용접에 있어서 시각센서를 이용한 용접선 추적과 용접변수 설정에 관한 연구 = A study on the weld seam tracking and selection of welding parameters in thin plate welding using vision sensorlink 최동필; Choi, Dong-Pil; et al, 한국과학기술원, 1994 |
2138 | 박판의 점진적 성형 공정의 성형성 향상에 대한 연구 = Study on the improvement of formability for incremental sheet metal forminglink 김태정; Kim, Tae-Jeong; et al, 한국과학기술원, 1998 |
2139 | 반 능동 단속형 감쇠기 설계 및 성능 시험에 관한 연구 = A study of a semi-active on-off type damper design and its performance testlink 장봉식; Chang, Bong-Sik; et al, 한국과학기술원, 1988 |
2140 | 반 원호 주위를 흐르는 점성류의 수치적 계산 = Viscous flow calculation over a semi-circular arclink 전지수; Jun, Ji-Su; et al, 한국과학기술원, 1988 |
2141 | 반경 방향 인장력을 받는 외주고정 회전 원판의 진동해석 = Vibration of outer-clamped rotating disk subjected to radial tensionlink 박상욱; Park, Sang-Uk; et al, 한국과학기술원, 1989 |
2142 | 반구형 펀치에 의한 Stretch-forming 의 마찰을 고려한 해석 = Analysis of stretch-forming by hemispherical punch with frictionlink 심현보; Shim, Hyun-Bo; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
2143 | 반능동 단속형 감쇠기를 이용한 승차감 향상에 대한 연구 = A study on the improvement of ride comfort using semiactive damperlink 원광민; Won, Kwang-Min; et al, 한국과학기술원, 1989 |
2144 | 반능동 단속형 감쇠기를 이용한 현가 장치 개선에 관한 연구 = A study on the improvement of a suspension system adopting a semiactive on-off damperlink 최성배; Choi, Sung-Bae; et al, 한국과학기술원, 1988 |
2145 | 반도체 웨이퍼 가공 공정에서 흐름시간의 평균과 표준편차를 제어하기 위한 실시간 스케쥴링 방법 = A real-time scheduling methodology to control the mean and the standard deviation of the flow time in semiconductor wafer fabricationlink 윤현중; Yoon, Hyun-Joong; et al, 한국과학기술원, 1999 |
2146 | 반무한 채널에서의 2차원의 느린 점성 흐름 = Two-dimensional slow viscous flow in a semi-infinite channellink 이응재; Lee, Eung-Jae; et al, 한국과학기술원, 1981 |
2147 | 반사 간섭 분광해석을 이용한 미량단백질 검출 방법에 관한 연구 = Micro detection of protein using spectral analysis of reflection interferencelink 이광천; Lee, Kwang-Chun; et al, 한국과학기술원, 2003 |
2148 | 반사식 광탄성법을 이용한 노치를 가진 인장시편의 탄-소성 해석 = Elastic-plastic analysis of tensile specimens with notches by reflective photoelastic methodlink 김용완; Kim, Yong-Wan; et al, 한국과학기술원, 1985 |
2149 | 반사파가 있는 관내의 능동 소음제어 = Active noise control in a duct with reflected wavelink 오상헌; Oh, Sang-Heon; et al, 한국과학기술원, 1994 |
2150 | 반응 기구론에 의한 탄화수소 화염의 일산화 질소 생성에 관한 연구 = A study on nitric oxide formation in hydrocarbon flames by chemical kineticslink 김석준; Kim, Seock-Joon; et al, 한국과학기술원, 1985 |
2151 | 반응도가 증가하는 핵연료봉 피복관에 고차 쉘 이론을 적용한 응력 해석 = Stress analysis on fuel rod cladding under reactivity initiated accident by higher order shell theorylink 박진석; Park, Jin-Suck; et al, 한국과학기술원, 1986 |
2152 | 반응사출성형을 위한 폴리우레탄 포움의 성형 = Processing of polyurethane foam for reaction injection moldinglink 조우종; Cho, Woo-Jong; et al, 한국과학기술원, 1992 |
2153 | 반응표면법을 이용한 구조물 최적설계 프로그램의 개발 = Development of a structural optimal design code using a response surface method implemented on a CAD platformlink 염기선; Yeom, Kee-Sun; et al, 한국과학기술원, 2001 |
2154 | 반응표면법을 이용한 차체 부재의 충돌성능 향상을 위한 설계 최적화 = Design optimization of auto-body members for crashworthiness enhancement with the response surface methodlink 나승렬; Na, Seung-Ryul; et al, 한국과학기술원, 2004 |
2155 | 반작용휠-외팔보-관측장비 계의 지향각도오차 감소를 위한 가진부 절연 = A reaction wheel isolation for reduction of pointing error in the satellite observation modellink 허균철; Hur, Gyun-Chul; et al, 한국과학기술원, 2014 |
2156 | 받음각이 큰 익형주위의 비정상 유동장에 대한 수치해석 = Unsteady flow analysis about an airfoil at high angle of attacklink 최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 1998 |
2157 | 발견적 일정 계획 기법을 이용한 수주 생산체제에서의 자원 제약하의 일정 계획 = Resource-constrained scheduling in the job shop using project scheduling heuristic algorithmlink 김수영; Kim, Soo-Young; et al, 한국과학기술원, 1981 |
2158 | 발란스 된 로보트의 동특성 및 부최적 발란스 질량에 관한 연구 = A study on dynamic characteristics and sub-optimal balance mass of a balanced robot manipulatorlink 신철균; Shin, Chul-Kyun; et al, 한국과학기술원, 1985 |
2159 | 발란스된 로보트의 동특성 및 제어에 관한 연구 = A study on dynamic characteristics and control of a balanced robotic manipulatorlink 안무승; Ahn, Mu-Seung; et al, 한국과학기술원, 1984 |
2160 | 발열블럭이 주기적으로 부착된 2차원 유로 내의 혼합대류 열전달 해석 = Mixed convection in 2D channel with periodically placed rectangular heat generating blockslink 노성철; Roh, Sung-Cheoul; et al, 한국과학기술원, 1993 |