14632 | 자가 보정을 이용한 정밀 기계의 계통오차 계산 = Self-calibration of systematic errors for precision machineslink 유승봉; Yoo, Seung-Bong; et al, 한국과학기술원, 2004 |
14633 | 자기 공명 힘 현미경의 개발 = Development of magnetic resonance force microscopylink 김기웅; Kim, Ki-Woong; et al, 한국과학기술원, 2002 |
14634 | 자기 이력 과정에서 발생하는 조화파의 물성에 따른 변화와 조화파 결합을 이용한 마그네토미터의 제작 = Analysis of harmonics generated during magnetization and a harmonics coupled magnetometerlink 전충삼; Jun, Chung-Sam; 남창희; 김호철; et al, 한국과학기술원, 1996 |
14635 | 자기 충격 액추에이터를 이용한 캡슐형 구동 기구 = The capsule type movement system with the magnetic impact actuatorslink 민현진; Min, Hyun-Jin; et al, 한국과학기술원, 2004 |
14636 | 자기광학 효과에 대한 광섬유 레이저의 편광특성에 관한 연구 = Polarization properties of fiber laser under magneto-optic effectlink 박진식; Park, Jin-Sik; et al, 한국과학기술원, 1997 |
14637 | 자기기록 미디아용 박막의 미세조직 발달에 미치는 응력의 효과 = Effect of stress on the microstructural evolution of thin films for magnetic recording medialink 박권식; Park, Kwon-Shik; et al, 한국과학기술원, 1999 |
14638 | 자기기록매체용 FePt 자성박막의 자화조직 및 cluster 형성에 관한 연구 = Magnetization structure and cluster formation of fept thin film for magnetic recording medialink 김만철; Kim, Man-Cheol; et al, 한국과학기술원, 2008 |
14639 | 자기베어링을 이용한 무진공챔버 초원심분리기에 관한 연구 = Study on vacuum chamber-free ultracentrifuge with magnetic bearingslink 박철훈; Park, Cheol Hoon; et al, 한국과학기술원, 2014 |
14640 | 자기예압 공기베어링 스테이지의 능동보정을 통한 초정밀 직선운동 특성에 관한 연구 = Study on ultraprecision straight motion by active compensation of air bearing stage with magnetic preloadlink 노승국; Ro, Seung-Kook; et al, 한국과학기술원, 2008 |
14641 | 자동차 구조용 복합재료 충격흡수봉에 관한 연구 = A study on the composite impact beams for an auto-bodylink 전성식; Cheon, Seong-Sik; et al, 한국과학기술원, 1999 |
14642 | 자동차 디자인에서 스케치 기반 3D 모델의 생성 = Sketch-based 3D model reconstruction in automotive designlink 천상욱; Cheon, Sang-Uk; et al, 한국과학기술원, 2008 |
14643 | 자동차 배기가스 NOx 저감장치를 위한 혼합전위 NOx 센서에 대한 연구 = Mixed potential NOx sensor for DeNOx system of automotive exhaustlink 박진수; Park, Jin-Su; et al, 한국과학기술원, 2008 |
14644 | 자동차 부품 업체의 제품 개발 프로세스를 위한 BPM 시스템 개발에 관한 연구 = Development of a BPM system for the product development process of automotive supplierlink 유석규; Yoo, Seock-Kyu; et al, 한국과학기술원, 2005 |
14645 | 자동차용 microalloying 중탄소 열간단조강의 고온 유동곡선과 동적재결정 조직의 모델링에 관한 연구 = Modeling of the flow curves and dynamic-recrystallized microstructure of microalloyed medium carbon hot-forging steellink 김관욱; Kim, Kwan-Wook; et al, 한국과학기술원, 2014 |
14646 | 자동차용 강판 고속인장물성 데이터의 측정불확도 산출 = Measurement uncertainty evaluation for high strain rate tensile properties of auto-body steel sheetslink 정세환; Jeong, Se-Hwan; et al, 한국과학기술원, 2012 |
14647 | 자동화 생산시스템의 페트리네트 모델링을 위한 모듈라 접근방법 = Modular approach to petri net modeling of automated manufacturing systemlink 박태유; Park, Tae-Yoo; et al, 한국과학기술원, 1992 |
14648 | 자동화 제조 시스템의 시뮬레이션을 위한 JR-net 모델링 = Job resource relation-net modeling for the simulation of automated manufacturing systemlink 한관희; Han, Kwan-Hee; et al, 한국과학기술원, 1996 |
14649 | 자동화 제조시스템용 시뮬레이터 개발을 위한 DEVS 형식론의 응용에 관한 연구 = Application of DEVS formalism for the development of automated manufacturing system simulatorlink 황문호; Hwang, Moon-Ho; et al, 한국과학기술원, 1999 |
14650 | 자동화 제조시스템의 유연성가치 산정 및 투자타당성 평가모형 = A method for quantifying flexibility values of automated manufacturing systemslink 편영식; Pyoun, Young-S.; et al, 한국과학기술원, 1993 |
14651 | 자동화된 마이크로파 필터 튜닝 방법과 뉴턴의 방법을 이용한 필터 합성 = Automated microwave filter tuning method and filter synthesis using newton’s methodlink 곽창수; Kwak, Chang-Soo; et al, 한국과학기술원, 2013 |
14652 | 자발착화연소 및 초음파 분무연소 합성법을 이용한 Titanate계 분말합성에 관한 연구 = Synthesis for titanates powders by combustion synthesis and ultrasonic mist combustion synthesislink 정충환; Jung, Choong-Hwan; 김도경; 김종희; et al, 한국과학기술원, 2002 |
14653 | 자벽이동 및 수직 자기터널접합용 수직자기 이방성 물질 개발 = Development of perpendicular magnetic anisotropy materials for domain wall motion and perpendicular magnetic tunnel junctionlink 김선옥; Kim, Seon-Ock; et al, 한국과학기술원, 2011 |
14654 | 자성박막을 위한 돌림힘자력계 측정법 연구 = Study on torque magnetometry for thin filmslink 허진; Hur, Jeen; et al, 한국과학기술원, 1997 |
14655 | 자연산 점토와 실리카흄을 이용한 유해폐기물 안정화 방안 연구 = Stabilization/solidification of hazardous wastes using organophilic clay and silica-fumelink 전관수; Jun, Kwan-Soo; et al, 한국과학기술원, 1995 |
14656 | 자연언어 정보 검색에서 상호 정보를 이용한 2단계 문서 순위 결정 방법 = Two-level document ranking methods using mutual information in natural language information retrievallink 강현규; Kang, Hyun-Kyu; et al, 한국과학기술원, 1997 |
14657 | 자외선 경사 노광과 고분자 성형공정을 이용한 미세바늘 제작 공정 개발 및 제작된 미세바늘의 특성 분석 = The development of microneedles’ fabrication methods using inclined UV lithography and polymer molding process, and the analyses of the microneedles’ characteristicslink 한만희; Han, Man-hee; et al, 한국과학기술원, 2008 |
14658 | 자유곡면 NC 가공에서의 공구간섭 방지 = Cutter interderence avoidance in NC machining sculptured surfaceslink 전차수; Jun, Cha-Soo; et al, 한국과학기술원, 1989 |
14659 | 자유곡면 형상 금형 가공용 CAPP 시스템 개발 = Development of a CAPP system for freeeform surface die-cavity machininglink 고기훈; Ko, Key-Hoon; et al, 한국과학기술원, 2003 |
14660 | 자유곡면을 위한 5-축 정밀가공에 관한 연구 = A study on the 5-axis precision machining for sculptured surfaceslink 조현덕; Cho, Hyun-Deog; et al, 한국과학기술원, 1993 |
14661 | 자율 주행방식의 이동 로봇을 위한 경로 제어 알고리즘에 관한 연구 = A study on the path tracking control algorithm for free-ranging mobile robotslink 고경철; Koh, Kyoung-Chul; et al, 한국과학기술원, 1992 |
14662 | 자장중 열처리가 Fe-B-Si 비정질 권철심의 자기적 성질에 미치는 영향 = Effects of magnetic annealing on the magnetic properties of amorphous Fe-B-Si wound coreslink 송재성; Song, Jae-Sung; 임호빈; 윤문수; et al, 한국과학기술원, 1991 |
14663 | 작업 수행 대화 시스템에서 혼합주도형 응답 생성 모형 = Mixed-initiative response generation model in a task-execution dialog systemlink 조영환; Cho, Young-Hwan; et al, 한국과학기술원, 1997 |
14664 | 작용-유도 분자 동역학을 이용한 나노시스템의 결함거동 연구 = A study on defect behaviors in nanosystems using action-derived molecular dynamics methodlink 이영민; Lee, Young-Min; et al, 한국과학기술원, 2010 |
14665 | 작은 원봉에 의한 원주와유동의 변형에 관한 연구 = A numerical study on alteration of the vortical flow behind a circular cylinder by a small control wirelink 김학봉; Kim, Hark-Bong; et al, 한국과학기술원, 1995 |
14666 | 잔류응력장에서의 피로균열닫힘 거동의 유한요소해석 = Finite element analysis of fatigue crack closure behaviour in a residual stress fieldlink 최현창; Choi, Hyeon-Chang; et al, 한국과학기술원, 1994 |
14667 | 잡음 속에 묻힌 임펄스 소음원의 위치 추정 = Impulsive source localization in noisy environmentlink 최영철; Choi, Young-Chul; et al, 한국과학기술원, 2005 |
14668 | 장거리 전송 파장분할 다중방식 수동형 광가입자망을 이용한 메트로-가입자망 통합 방안 = Consolidation of metro and access networks by using long-reach WDM-PONlink 이상묵; Lee, Sang-Mook; et al, 한국과학기술원, 2007 |
14669 | 장기이익계획 및 의사결정을 위한 다기간 비김분석 = Multi-period breakeven analysis for long term profit planning and decisionslink 김진욱; Kim, Jin-Wook; et al, 한국과학기술원, 1992 |
14670 | 장파장 단일 횡모드 광결정-수직공진 표면광 레이저 특성에 관한 연구 = Characteristics of long wavelength photonic-crystal vertical-cavity surface-emitting laserslink 백종화; Baek, Jong-Hwa; et al, 한국과학기술원, 2004 |
14671 | 장파장 주입법을 이용한 펨토초 테라와트 티타늄 사파이어 레이저의 구성과 동작 특성 = System configuration and operational characteristics of a femtosecond terawatt Ti:sapphire laser based on a long-wavelength injection methodlink 차용호; Cha, Yong-Ho; et al, 한국과학기술원, 2000 |
14672 | 장형 위암 연관 유전자와 변이 = Genes and variations for intestinal-type gastric cancer susceptibilitylink Lim, Byung-Ho; 임병호; et al, 한국과학기술원, 2011 |
14673 | 재결정화된 접합형태의 금속기판 위에서 완충막 및 YBCO 고온초전도 박막 형성과 sputtering 조건 그리고 초전도 입계에서의 특성 연구 = Study on sputtering conditions, film growths, and superconducting properties of YBCO films,their grain boundaries and their buffer layers on recrystallized and bonded metallic substrateslink 김호섭; Kim, Ho-Sup; et al, 한국과학기술원, 2003 |
14674 | 재구성 가능한 능동적 영상 시스템을 이용한 마이크로MEMS 부품의 영상기반조립 = Visually guided assembly of micro MEMS parts using reconfigurable active vision systemlink 이덕영; Lee, Duk-Youn; et al, 한국과학기술원, 2010 |
14675 | 재료의 연성파단을 예측하기 위한 연속체 손상 항복 함수에 관한 연구 = A study on a continuum damage yield function to predict ductile fracture of materialslink 고윤기; Ko, Youn Ki; et al, 한국과학기술원, 2011 |
14676 | 재료조각법을 이용한 위상최적설계 = Material cloud method for topology optimizationlink 장수영; Chang, Su-Young; et al, 한국과학기술원, 2005 |
14677 | 재생 조화 모드록킹 GHz Nd:YLF 레이저에 관한 연구 = Regenerative harmonic mode-locking of a GHz Nd:YLF laserlink 유태준; Yu, Tae-Jun; et al, 한국과학기술원, 2002 |
14678 | 재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink 최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013 |
14679 | 저 가시성 환경에서 효과적인 영상 개선 방법 및 특징 추출에 관한 연구 = (A) study on effective image improvement method and feature extraction in low visibility environmentslink 김경일; 김수현; et al, 한국과학기술원, 2018 |
14680 | 저결맞음 간섭계를 이용한 다층 형상 측정 = Multiple-layered surface measurement using low-coherence interferometrylink 이창윤; Lee, Chang-Yun; et al, 한국과학기술원, 2016 |
14681 | 저결맞음 간섭계를 이용한 대구경 거친 유리 표면 형상 측정 = Large-aperture ground glass surface form measurement using low-coherence scanning interferometrylink 배은덕; Bae, Eun-Deok; et al, 한국과학기술원, 2017 |
14682 | 저결맞음 간섭계를 이용한 대면적 복잡 형상 측정 = Meso-scale complex surface measurement using low-coherence interferometrylink 유준호; You, Joon-Ho; et al, 한국과학기술원, 2008 |
14683 | 저궤도 소형 위성을 위한 스크립트 기반 = Script based ground station software for the small satellite on the low earth orbitlink 박홍영; Park, Hong-Young; et al, 한국과학기술원, 2009 |
14684 | 저변형률 영역에서 지반의 비선형 거동을 고려한 굴착시 토류구조물의 변형해석 = Deformational analysis of earth retaining structures during excavation considering nonlinear soil behavior at small strainslink 이병철; Lee, Byoung-Chul; et al, 한국과학기술원, 2004 |
14685 | 저속충격을 받는 복합적층판의 거동과 손상에 대한 연구 = Response and damage of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1994 |
14686 | 저압 다이아몬드 합성에서 Ni, Fe, Co, Pd 기판에서 형성되는 soot 형성기구와 합성 조건에 따른 다이아몬드의 성장 모양 변화 = Mechanism of soot-formation on Ni, Fe, Co and Pd substrates, and morphology variation of diamond with deposition conditions in CVD of diamondlink 허종무; Huh, Jong-Moo; et al, 한국과학기술원, 2000 |
14687 | 저압 다이아몬드 합성에서의 Charged cluster 모델 = The charged cluster model for low pressure synthesis of diamondlink 한준희; Hahn, Jun-Hee; et al, 한국과학기술원, 1995 |
14688 | 저온 소성 가능한 전구체 기반 산화물 박막트랜지스터 = Low temperature processable precursor based oxide thin-film transistorlink 황영환; Hwang, Young-Hwan; et al, 한국과학기술원, 2012 |
14689 | 저온 열처리 공정에 의한 LCD-TFT용 poly-Si 박막의 제조에 관한 연구 = A study on the fabrication of poly-Si films for LCD-TFT by low-temperature annealing processlink 김해열; Kim, Hae-Yeol; et al, 한국과학기술원, 2000 |
14690 | 저온 유도결합 플라즈마 산화에 의한 $Si/SiO_2$ 계면 특성과 박막트랜지스터 특성 변화 연구 = Effects of low-temperature inductively-coupled plasma oxidation on the characteristics of $Si/SiO_2$ interface and thin film transistorslink 김보현; Kim, Bo-Hyun; et al, 한국과학기술원, 2004 |
14691 | 저온에서 Al - Zn 합금의 불연속 석출 구동력에 관한 연구 = A study on the driving force of discontinuous precipitation in an Al - Zn alloy at low temperatureslink 정영훈; Chung, Young-Hoon; 윤덕용; 신명철; et al, 한국과학기술원, 1992 |