Browse "College of Engineering(공과대학)" by Type Thesis(Ph.D)

Showing results 10421 to 10440 of 10596

10421
평면기구의 회전연결부에서의 간극효과를 고려한동적해석 및 설계 = Dynamic analysis and design of planar mechanisms with clearances at revolute jointslink

신재균; Shin, Jae-Kyun; et al, 한국과학기술원, 1985

10422
평면벽 근방의 평판에 작용하는 유체역학적 힘 : MEMS의 해석 및 응용 = Hydrodynamic force on a plate near the plane wall : analysis of MEMS and its applicationslink

김기운; Kim, Ki-Woon; et al, 한국과학기술원, 2003

10423
평면변형률 상태 하에서 유한요소법을 이용한 균열닫힘거동 예측에 관한 연구 = Finite element analysis of fatigue crack closure under plane strain statelink

이학주; Lee, Hak-Joo; et al, 한국과학기술원, 2003

10424
평면체의 이동파라미터 추정에 의한 블럭이동벡터의 보정방식 = Block-motion vector correction by using motion parameter estimate of planar objectlink

서강수; Seo, Kang-Soo; et al, 한국과학기술원, 1994

10425
평판 디스플레이용 복합재료 로봇구조의 설계 및 제조에 관한 연구 = Design and manufacture of the composite robot structure for manipulating large glass panels for flat panel displaylink

오제훈; Oh, Je-Hoon; et al, 한국과학기술원, 2001

10426
평판에 횡방향으로 놓인 사각형 그루브를 갖는 물체의 강제대류에 관한 실험 및 수치적 연구 = Experimental and numerical study on forced convection from plates with transverse rectangular grooveslink

이상종; Lee, Sang-Jong; et al, 한국과학기술원, 2000

10427
평판형 광파 회로 기반 저잡음, 고안정도 펨토초 레이저 = Robust and low-noise femtosecond lasers based on planar lightwave circuit deviceslink

김철; Kim, Chur; et al, 한국과학기술원, 2017

10428
평행광 엑스선 토모그라피의 설계와 오차분석에 관한 연구 = Design and Error Analysis of Parallel-Beam X-ray Tomographylink

강성훈; Kang, Sung-Hoon; et al, 한국과학기술원, 2011

10429
평활화 유한 요소법을 이용한 미분장 근사와 요소 개발에의 응용 = Differential field approximation using the smoothed finite element method and its application to development of finite elementslink

최재훈; 이병채; et al, 한국과학기술원, 2019

10430
평활화 효과 개선을 통한 DNN 기반 통계 파라메트릭 음성합성기의 음질 향상 방법 = Performance improvement of DNN-based statistical parametric speech synthesis by over-smoothing effect reductionlink

박상준; 한민수; et al, 한국과학기술원, 2019

10431
폐기물처분장 주변에서의 지하수유동 및 오염물질이동 특성에 관한 연구 = A study on characteristics of groundwater flow and pollutants transport around waste disposal siteslink

김계남; Kim, Gye-Nam; et al, 한국과학기술원, 1996

10432
폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink

강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005

10433
폐플라스틱 선별 로봇의 흡착 위치 선정과 고속이송궤적 생성 알고리즘 연구 = Study of suction location decision and rapid manipulation trajectory generation algorithm for plastic waste sorting robotlink

엄상우; 김경수; Kim, Kyung-soo; 김수현; et al, 한국과학기술원, 2022

10434
폐합성수지류의 2단 소각 기술과 회전식 소각로에의 설계 응용 = Two-stage incineration of polymer waste and advanced design of rotary kiln systemlink

김석완; Kim, Seok-Wan; et al, 한국과학기술원, 1995

10435
포장공진기를 사용한 초소형 이동 통신용 전압제어 발진기의 설계 = Design of a small voltage-controlled-oscillator by a packaging resonatorlink

목하균; Mok, Ha-Kyun; et al, 한국과학기술원, 2000

10436
포화 구동기를 갖는 해상 크레인의 위치 제어 전략 = Position control strategy for an offshore crane with actuator saturationlink

김동호; Kim, Dongho; et al, 한국과학기술원, 2016

10437
폴더블 유기발광소자를 위한 박막 봉지막 내 유기층의 재료적/구조적 설계 = Material and structural design of organic layer in thin film encapsulation for foldable organic light emitting diodelink

강기석; 최경철; et al, 한국과학기술원, 2021

10438
폴리 도메인 구조를 갖는 유방성 액정 고분자 용액의 복굴절 및 유변학적 특성에 관한 연구 = Rheo-optical and rheological behaviors of lyotropic polymer liquid crystals with polydomain structureslink

김동학; Kim, Dong-Hak; et al, 한국과학기술원, 1993

10439
폴리머 기판에 전사된 다층 그래핀의 전기-기계적 거동 = Electromechanical behavior of multilayer graphene on polymer substratelink

원세정; Won, Sejeong; et al, 한국과학기술원, 2015

10440
폴리머 다중모드 광도파로 및 모드차수 변환기의 제작 = Fabrication of polymeric multimode optical waveguides and mode-order converterlink

이병탁; Lee, Byung-Tak; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0