Browse "ME-Journal Papers(저널논문)" by Subject GAS
Showing results 1 to 39 of 39
| A computational-fluid-dynamics study on scaling up a single flat membrane reactor for on-site hydrogen production Yoo, Jae Young; Choi, Hongbum; Lee, Heedae; Lee, Jay Hyung; Bae, Joongmyeon, CHEMICAL ENGINEERING RESEARCH & DESIGN, v.200, pp.670 - 681, 2023-12 |
| A diesel fuel processor for stable operation of solid oxide fuel cells system: I. Introduction to post-reforming for the diesel fuel processor Yoon, Sang-Ho; Bae, Joong-Myeon, CATALYSIS TODAY, v.156, no.1-2, pp.49 - 57, 2010-10 |
| A diesel fuel processor for stable operation of solid oxide fuel cells system: II. Integrated diesel fuel processor for the operation of solid oxide fuel cells Yoon, Sang-Ho; Bae, Joong-Myeon; Lee, Sang-Ho; Pham, Thang V.; Katikaneni, Sai P., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.37, no.11, pp.9228 - 9236, 2012-06 |
| A New Route toward Ultrasensitive, Flexible Chemical Sensors: Metal Nanotubes by Wet-Chemical Synthesis along Sacrificial Nanowire Templates Lim, Mi Ae; Kim, Dong Hwan; Park, Chong-Ook; Lee, Young Wook; Han, Sang Woo; Li, Zhiyong; Williams, R. Stan; et al, ACS NANO, v.6, no.1, pp.598 - 608, 2012-01 |
| A study on ray tracing method for CFD simulations of laser keyhole welding: progressive search method Han, Sang-Woo; Ahn, Junsu; Na, Suck-Joo, WELDING IN THE WORLD, v.60, no.2, pp.247 - 258, 2016-02 |
| Analysis of NO formation in high temperature diluted air combustion in a coaxial jet flame using an unsteady flamelet model Lee, KW; Choi, Do Hyung, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.52, no.5-6, pp.1412 - 1420, 2009-02 |
| Comparison of thermal characteristics of confined and unconfined impinging jets Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.15-16, pp.3366 - 3371, 2010-07 |
| Comprehensive quantification of Ni-Gd0.1Ce0.9O1.95 anode functional layer microstructures by three-dimensional reconstruction using a FIB/SEM dual beam system Lee, Kang Taek; Vito, Nicolas J.; Wachsman, Eric D., JOURNAL OF POWER SOURCES, v.228, pp.220 - 228, 2013-04 |
| Cryogenic impact resistance of chopped fiber reinforced polyurethane foam Yu, Young Ho; Nam, Soohyun; Lee, Dongyoung; Lee, Dai Gil, COMPOSITE STRUCTURES, v.132, pp.12 - 19, 2015-11 |
Detection of Graphene Cracks By Electromagnetic Induction, Insensitive to Doping Level Yoon, Taeshik; Kang, Sumin; Kang, Tae Yeob; Kim, Taek-Soo, CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, v.120, no.2, pp.351 - 361, 2019-08 |
| Diesel autothermal reforming with hydrogen peroxide for low-oxygen environments Han, Gwangwoo; Lee, Sangho; Bae, Joongmyeon, APPLIED ENERGY, v.156, pp.99 - 106, 2015-10 |
| Effect of confinement on heat transfer characteristics of a microscale impinging jet Youn, Young-Jik; Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.54, no.1-3, pp.366 - 373, 2011-01 |
| Effect of mixture formation mode on the combustion and emission characteristics in a hydrogen direct-injection engine under different load conditions Lee, Sanguk; Kim, Gyeonggon; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.209, 2022-06 |
| Effect of typical modeling assumptions for pulverized coal char combustion commonly used in commercial CFD codes Kim, Daehee; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.11, pp.4951 - 4961, 2015-11 |
| EFFECTS OF N-2/CO2 DILUTION ON FLAME PROPAGATION VELOCITIES AND QUENCHING DISTANCES OF OXY-METHANE PREMIXED MIXTURES USING AN ANNULAR-STEPWISE-DIVERGING-TUBE (ASDT) Kim, Hun Young; Lee, Jiseop; Kim, Nam Il, MATHEMATICAL MODELLING OF NATURAL PHENOMENA, v.13, no.6, 2018-12 |
| Effects of particle shape on the unipolar diffusion charging of nonspherical particles Oh, H; Park, H; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.38, pp.1045 - 1053, 2004-11 |
| Flattening Characteristics of Ni(20)Cr Thermal-Sprayed Coating Layers on Preheated SCM415 Substrates Shin, Dong Hwan; Lee, Jae Bin; Wi, Jae Lyoung; Park, Seungil; KIM, NAM IL; Cho, Minhaeng; Kim, Jong Min; et al, MATERIALS TRANSACTIONS, v.52, no.7, pp.1515 - 1521, 2011-07 |
| Focused Energy Field Method for the Localized Synthesis and Direct Integration of 1D Nanomaterials on Microelectronic Devices Yang, Daejong; Kim, Donghwan; Ko, Seung-Hwan; Pisano, Albert P.; Li, Zhiyong; Park, In-Kyu, ADVANCED MATERIALS, v.27, no.7, pp.1207 - 1215, 2015-02 |
| Heat transfer and fluid flow characteristics of two-phase impinging jets Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.25-26, pp.5692 - 5699, 2010-12 |
| Heat transfer characteristics of a micro-scale impinging slot jet Choo, Kyo-Sung; Youn, Young-Jik; Kim, Sung-Jin; Lee, Dae-Hee, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.52, no.13-14, pp.3169 - 3175, 2009-06 |
| Heat transfer characteristics of impinging air jets under a fixed pumping power condition Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.1-3, pp.320 - 326, 2010-01 |
| Highly integrated synthesis of heterogeneous nanostructures on nanowire heater array Jin, Chun Yan; Yun, Jeonghoon; Kim, Jung; Yang, Daejong; Kim, Dong Hwan; Ahn, Jae Hyuk; Lee, Kwang-Cheol; et al, NANOSCALE, v.6, no.23, pp.14428 - 14432, 2014-12 |
| Influence of driving forces on weld pool dynamics in GTA and laser welding Han, Sang-Woo; Cho, Won-Ik; Na, Suck-Joo; Kim, Cheol-Hee, WELDING IN THE WORLD, v.57, no.2, pp.257 - 264, 2013-03 |
| Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst Nam, CH; Shin, Hyun Dong, CATALYSIS TODAY, v.83, pp.257 - 264, 2003-08 |
| Investigation of the Structures of Attached and Lifted Flames with Various Ignition Positions over a Triple Concentric Burner in the Hysteresis Regime Kim, Hyeon Jun; Choe, Jinhoon; Shin, Hyun Dong, ENERGY & FUELS, v.24, no.1, pp.324 - 332, 2010-01 |
| Jumping-Droplet-Enhanced Condensation on Scalable Superhydrophobic Nanostructured Surfaces Miljkovic, Nenad; Enright, Ryan; Nam, Youngsuk; Lopez, Ken; Dou, Nicholas; Sack, Jean; Wang, Evelyn N., NANO LETTERS, v.13, no.1, pp.179 - 187, 2013-01 |
| Kinetic modeling of diesel autothermal reforming for fuel cell auxiliary power units Kim, Daewook; Choi, Suhang; Jeong, Sohyun; Bae, Minseok; Katikaneni, Sai P.; Bae, Joongmyeon; Heo, Seongmin; et al, CHEMICAL ENGINEERING JOURNAL, v.424, 2021-11 |
| Multi-objective optimization of VOC recovery and reuse in crude oil loading Lee, Sangick; Choi, Inhwan; Chang, Daejun, APPLIED ENERGY, v.108, pp.439 - 447, 2013-08 |
| Numerical analysis of a 20-kW(e) biogas steam reformer in PEMFC applications Kim, Sunyoung; Bae, Joong-Myeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.39, no.34, pp.19485 - 19493, 2014-11 |
| Numerical analysis of isothermal flow in lower part of blast furnace considering effect of cohesive zone Jin, HJ; Choi, Sangmin, IRONMAKING & STEELMAKING, v.37, no.2, pp.89 - 97, 2010-02 |
| Numerical simulation of molten pool dynamics in high power disk laser welding Cho, Won-Ik; Na, Suck-Joo; Thomy, Claus; Vollertsen, Frank, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.1, pp.262 - 275, 2012-01 |
| Numerical study on high-temperature diluted air combustion for the turbulent jet flame in crossflow using an unsteady flamelet model Lee, KW; Choi, Do Hyung, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.52, no.25-26, pp.5740 - 5750, 2009-12 |
| Release characteristics of highly pressurized hydrogen through a small hole Han, Sang Heon; Chang, Daejun; Kim, Jong Soo, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.38, no.8, pp.3503 - 3512, 2013-03 |
| Robust numerical simulation of pressure swing adsorption process with strong adsorbate CO2 Chang, Daejun; Min, Junho; Moon, Kiho; Park, Youngkwon; Jeon, Jongki; Ihm, Son Ki, CHEMICAL ENGINEERING SCIENCE, v.59, no.13, pp.2715 - 2725, 2004 |
| The effect of activated carbon injection rate on the removal of elemental mercury in a particulate collector with fabric filters Choi, HK; Lee, SH; Kim, Sang Soo, FUEL PROCESSING TECHNOLOGY, v.90, pp.107 - 112, 2009-01 |
| The effect of inclination on impinging jets at small nozzle-to-plate spacing Choo, Kyo-Sung; Kang, Tae-Yeob; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.13-14, pp.3327 - 3334, 2012-06 |
| The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing Loui, A.; Goericke, F. T.; Ratto, T. V.; Lee, Jungchul; Hart, B. R.; King, W. P., SENSORS AND ACTUATORS A-PHYSICAL, v.147, no.2, pp.516 - 521, 2008-10 |
| Transient Stewartson layers of a rotating compressible fluid Park, JS; Hyun, Jae Min, FLUID DYNAMICS RESEARCH, v.19, no.5, pp.303 - 325, 1997-05 |
| Uniformly scalable and stackable porous transport layer manufactured by tape casting and calendering for efficient water electrolysis Park, Seong Hyeon; Koo, Jong Un; Park, Young June; Jang, Seungsoo; Lee, Kang Taek; Han, Hyuk Su; Ryu, Ho Jin, CHEMICAL ENGINEERING JOURNAL, v.481, 2024-02 |
Discover
Type
- 12,137 Article
Open Access
- 406 OA Article
Date issued
- 1,579 2020 - 2024
- 3,947 2010 - 2019
- 3,679 2000 - 2009
- 2,269 1990 - 1999
- 600 1980 - 1989