An 8-bit 1-GS/s asynchronous loop-unrolled (LU) successive approximation register (SAR)-Flash hybrid analog-to-digital converter (ADC) with complementary dynamic amplifiers (CDAs) is presented. The proposed ADC is a combination of an asynchronous LU-SAR ADC and a reference-embedding 8x interpolating flash (I-Flash) ADC to enhance the conversion speed. Operating the CDAs in a dual-edge manner makes it possible to achieve an 8-bit resolution with only four CDAs and one capacitive digital-to-analog converter (C-DAC), which improves the power and area efficiency as well as the input bandwidth. A prototype ADC implemented in a 28-nm CMOS process occupies a 0.002 mm(2) active area. The measured differential non-linearity (DNL) and integral non-linearity (INL) after offset calibration is 0.59 and 0.82 LSB, respectively. With a 0.499-GHz input, the measured signal-to-noise and distortion ratio (SNDR) and the spurious-free dynamic range (SFDR) are 45.5 and 59.4 dB, respectively. The measured effective resolution bandwidth (ERBW) is above 3 GHz. The power consumption at 1-GS/s conversion is 2.55 mW with a supply voltage of 1.1 V, leading to a figure of merit (FoM) of 16.6 fJ/conversion-step.