2161 | 복합 다단격자 태양열 흡수체의 전자기 공진 이론 연구 및 강건 최적설계 = Theoretical study on electromagnetic resonance theory and robust optimization of tandem grating solar absorberlink 최종인; 이봉재; et al, 한국과학기술원, 2018 |
2162 | 복합 봉재의 전방 압출에 관한 연구 = A study on the forward extrusion of composite rodslink 김영규; Kim, Young-Giu; et al, 한국과학기술원, 1980 |
2163 | 복합 외팔보 모델을 사용한 인공 고관절 스템부의 최적 설계 = Optimal design of metal stem of a hip prosthesis using a composite cantilever modellink 박종오; Park, Jong-Oh; et al, 한국과학기술원, 1981 |
2164 | 복합 원통의 탄소성 해석에 관한 연구 = A study on the elasto-plastic analysis of compound cylinderlink 정성종; Chung, Sung-Chong; et al, 한국과학기술원, 1981 |
2165 | 복합 하중 하에서의 환상 외팔보에 대한 최적설계 연구 = Optimal design of cantilever beam of annular shape under various losdinglink 박상규; Park, Sang-Gyu; et al, 한국과학기술원, 1981 |
2166 | 복합관의 전방압출에 관한 연구 = A study on the forward extrusion of composite tubeslink 김종호; Kim, Jong-Ho; et al, 한국과학기술원, 1980 |
2167 | 복합다양체 자료구조를 갖는 형상모델러에서 오일러 작업자의 구현 = Implementation of the euler operators for a geometric modeler with non-manifold data structurelink 명세현; Myung, Se-Hyun; et al, 한국과학기술원, 1995 |
2168 | 복합재 적층판에 삽입된 광섬유가 층간파괴인성에 미치는 영향 = The effect of embedded optical fibers on the interlaminar fracture toughness of composite laminateslink 최철; Choi, Cheol; et al, 한국과학기술원, 1997 |
2169 | 복합재료 toecap의 정적 및 충격 특성에 관한 연구 = A study on the static and impact characteristics of composite toecaplink 이승민; Lee, Seung-Min; et al, 한국과학기술원, 2005 |
2170 | 복합재료 가이드 롤러에 관한 연구 = A study on the composite guide rollerslink 방경근; Bang, Kyung-Guen; et al, 한국과학기술원, 1998 |
2171 | 복합재료 적층판에 삽입된 FBG 센서를 이용한 구조물의 손상 감지 기법 = Damage detection technique of composite laminates with embedded FBG sensorslink 김원석; Kim, Won-Seok; et al, 한국과학기술원, 2004 |
2172 | 복합재료/금속 계면의 혼합모드 피로 특성 = Mixed-mode fatigue characteristics of composite/metal interfacelink 백상호; Baek, Sang-Ho; et al, 한국과학기술원, 2010 |
2173 | 복합재료를 이용한 로보트 설계 및 성능 평가에 관한연구 = A study on robot design with composite material and its performance evaluationlink 이두현; Lee, Doo-Hyun; et al, 한국과학기술원, 1989 |
2174 | 복합적 층판의 층간분리현상 해석 = Analysis of delamination in laminated compositeslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1982 |
2175 | 복합적층판에서 적층순서가 파괴인성치에 미치는 영향 = Influence of staking sequence on fracture thoughness of composite laminateslink 김상영; Kim, Sang-Young; et al, 한국과학기술원, 1983 |
2176 | 복합형 이동로봇의 모형화와 제어에 관한 연구 = A study on the modeling and control of hybrid locomotion vehiclelink 김형대; Kim, Hyung-Dae; et al, 한국과학기술원, 1991 |
2177 | 본드선도로부터 영점 동역학의 분석 = The analysis of zero dynamics through bond graphlink 임정우; Lim, Jeong-Woo; et al, 한국과학기술원, 1999 |
2178 | 볼 앤드 밀 곡면 가공의 절삭기구 및 절삭력 예측에 관한 연구 = A study on the cutting mechanism and prediction of cutting forces in ball-end milling processlink 전용태; Jun, Yong-Tae; et al, 한국과학기술원, 1990 |
2179 | 볼 앤드 밀에 의한 곡면가공의 절삭력 예측에 관한연구 = A study on the prediction of cutting forces in ball-end milling processlink 박희덕; Park, Hee-Duk; et al, 한국과학기술원, 1989 |
2180 | 볼록 근사법을 이용한 구조물 최적설계 방법의 신뢰성 및 효율개선 = Improving reliability and efficiency of the convex linearization method applied to structural optimization problemslink 서회식; Seo, Heui-Sik; et al, 한국과학기술원, 1992 |
2181 | 볼류트 펌프 설계 프로그램 개발을 위한 설계 변수 및 설계 기법에 관한 연구 = Study for design variables and design algorithm to develop a volute pump design programlink 유기수; Yoo, Ki-Soo; et al, 한국과학기술원, 2008 |
2182 | 볼스크류 고정밀가공의 셋팅오차 해석과 양센타간 편차측정 및 보정시스템 개발 = Analysis of setting errors and development of the measurement and adjustment system of the alignment error between both centers for precise ballscrew machininglink 이용준; Lee, Yong-Jun; et al, 한국과학기술원, 1995 |
2183 | 볼스터드 공정설계 전문가시스템 개발에 관한 연구 = A study on development of expert system for process design of ball studlink 송종호; Song, Jong-Ho; et al, 한국과학기술원, 1998 |
2184 | 봉형상 압연공정 롤 패스 및 롤 형상 설계용 전문가시스템 개발 = Development of expert system for roll pass and profile design of bar rollinglink 김신회; Kim, Shin-Hoe; et al, 한국과학기술원, 1997 |
2185 | 봉형상 압연공정의 롤 경로 및 롤 형상 설계용 설계보조시스템 개발에 대한 연구 = A study on development of a computer-aided-design system for roll pass and roll profile design in bar rollinglink 권혁철; Kwon, Hyuck-Cheol; et al, 한국과학기술원, 1998 |
2186 | 부 신경망 구조로 이루어진 역전파 신경망을 이용한 숫자 인식 = Numeral recognition using error back propagation neural network composed of sub-networkslink 강병훈; Kang, Byoung-Hun; et al, 한국과학기술원, 1995 |
2187 | 부가질량 및 강성을 이용한 구조물의 모우드 합성에 관한 연구 = A study on structural mode synthesis by using added mass and stiffnesslink 우관제; Woo, Kwan-Je; et al, 한국과학기술원, 1987 |
2188 | 부가질량에 의한 2차원 기구 회전 연결부 간극효과의 최소화 = Minimization of clearance effects in two dimensional revolute joints by mass additionlink 박철범; Park, Cheol-Beom; et al, 한국과학기술원, 1985 |
2189 | 부구조법을 이용한 구조물의 최적 설계 = Optimal structural design with substructuringlink 박정호; Park, Jeong-Ho; et al, 한국과학기술원, 1984 |
2190 | 부레쉬레스 풍차 발전기의 성능해석 = Performance analysis of the self-excited brushless windmill-generatorlink 조규종; Cho, Kyu-Zong; et al, 한국과학기술원, 1976 |
2191 | 부력으로 인한 난류 열대류의 비등방성 효과 = Non-isotropic effect for buoyancy driven turbulent thermal convectionlink 김태규; Kim, Tae-Gyu; et al, 한국과학기술원, 1992 |
2192 | 부분 관통 균열을 갖는 이방성 접착 구조물의 해석 = Analysis of adhesively bonded anisotropic structure with a part-through cracklink 정성균; Cheong, Seong-Kyun; et al, 한국과학기술원, 1984 |
2193 | 부분 차원 근사에 의한 2차원 문제의 응력 해석에 관한 연구 = A study on 2-dimensional stress analysis by the partial discretization methodlink 여승태; Yu, Seung-Tae; 윤용산; 곽병만; et al, 한국과학기술원, 1989 |
2194 | 부분변경법을 이용한 구조물의 과도응답 재해석 = Transient response reanalysis of a structure using local modification techniquelink 김일수; Kim, Il-Soo; et al, 한국과학기술원, 1992 |
2195 | 부분적으로 유체가 담겨있는 원통내에서의 정지상태로부터의 스핀 업의 수치적 계산 = Numerical solution of fluid spin-up from rest in a partially filled cylinderlink 김관엽; Kim, Kwan-Yeop; et al, 한국과학기술원, 1989 |
2196 | 부식피로강도 데이타베이스의 구축과 이를 이용한 각종 인자의 영향 분석 = Construction of corrosion fatigue strength database and analysis of effects of various factors on corrosion fatiguelink 유승훈; Yu, Seung-Hun; et al, 한국과학기술원, 1994 |
2197 | 부유 질량 장치를 이용한 회전체의 진동제어 = Control of rigid rotor vibration by a floating mass devicelink 김진춘; Kim, Jin-Choon; et al, 한국과학기술원, 1984 |
2198 | 부최적제어의 저항용접공정에의 적용에 관한 연구 = A study on the application of sub-optimal control to the resistance spot welding processlink 최상기; Choi, Sang-Gi; et al, 한국과학기술원, 1987 |
2199 | 부하 시뮬레이터의 힘 및 위치제어에 관한 연구 = Study on force and position control of load simulatorlink 이정철; Lee, Jung-Chul; et al, 한국과학기술원, 1994 |
2200 | 부호 계산을 이용한 효율적인 차량 시뮬레이션 프로그램의 개발 = Development of efficient vehicle simulation program using symbolic manipulationlink 이광표; Lee, Kwang-Pyo; et al, 한국과학기술원, 1994 |
2201 | 분류층 연소로에서의 미분탄 연소에 관한 실험적 연구 = An experimental study on the pulverized coal combustion in an entrained bed furnacelink 박정규; Park, Jung-Kyu; et al, 한국과학기술원, 1996 |
2202 | 분리된 원주압보조 액압유도 역 재드로잉 공정에 관한 연구 = Study on the hydromechanical reverse redrawing process assisted by separated radial pressurelink 김종봉; Kim, Jong-Bong; et al, 한국과학기술원, 1995 |
2203 | 분말 소결 금속의 전방압출에서의 치밀화에 관한 연구 = A study on densification of sintered powder metals in forward extrusionlink 오성국; Oh, Seong-Guk; et al, 한국과학기술원, 1992 |
2204 | 분무 건조기내에서의 유동특성에 관한 수치적 연구 = Numerical study of flow characteristics in a spray dryerlink 김현준; Kim, Hyun-Joon; et al, 한국과학기술원, 1992 |
2205 | 분무식 냉각탑의 기초 설계에 관한 연구 = Preliminary design consideration of spraying-type cooling towerslink 서동은; Seo, Dong-Eun; et al, 한국과학기술원, 1999 |
2206 | 분무유도식 직접 분사 스파크 엔진에서 분할 분사와 액상 LPG 직접 분사가 연소 및 배출가스에 미치는 영향 = Effects of gasoline split injection and LPG direct injection on combustion and emission characteristics in spray-guided spark ignition enginelink 이민석; Lee, Min-Seok; et al, 한국과학기술원, 2012 |
2207 | 분무조건 변화에 따른 반건식 세정기내 $SO_2$ 제거특성의 실험적 연구 = An experimental study of the $SO_2$ removal chracteristics in a spray dryer absorber with the change of spray conditionslink 김수혁; Kim, Su-Hyuk; et al, 한국과학기술원, 2000 |
2208 | 분사기공 형상에 따른 디젤 분무의 특성 = Effect of nozzle geometric on the common-rail diesel spray characteristicslink 공장식; Kong, Jang-Sik; et al, 한국과학기술원, 2003 |
2209 | 분사신호에 따른 피에조 외향개방 분사기의 분무특성 = Effect of injection signal on spray characteristics of piezo actuated outward opening injectorlink 오희창; Oh, Hee-Chang; et al, 한국과학기술원, 2009 |
2210 | 분산 구동 메커니즘을 이용한 인간형 지상 무인 로봇 매니퓰레이터 설계 = Design of humanoid arm manipulator for unmanned ground vehicle using distributed actuation mechanismlink 김세환; Kim, Se-Hwan; et al, 한국과학기술원, 2012 |
2211 | 분산 지식베이스에 기반한 제품 설계 환경 = Product design based on distributed knowledge-baselink 복기소; Bok, Ki-So; et al, 한국과학기술원, 1998 |
2212 | 분위기 가스의 가압이 질화효과에 미치는 영향 = Influence of pressurizing of NH3 gas on nitriding effectlink 현봉섭; Hyun, Bong-Sup; 엄윤용; 곽병만; et al, 한국과학기술원, 1986 |
2213 | 분자 동역학을 이용한 공구형상에 따른 미소 절삭현상에 관한 연구 = A study on the microcutting for configuration of tools using molecular dynamicslink 문찬홍; Moon, Chan-Hong; et al, 한국과학기술원, 1995 |
2214 | 분자 동역학을 이용한 원자 스케일에서의 마찰 및 마모 거동에 관한 연구 = A study on friction and wear behavior on the atomic scale using molecular dynamicslink 김광섭; Kim, Kwang-Seop; et al, 한국과학기술원, 2003 |
2215 | 분자동역학 기법을 이용한 $\gamma$-TiAl 단결정 나노선의 변형 거동에 대한 체계적 연구 = Systematic investigation of the deformation mechanisms of $\gamma$-TiAl single crystal nanowirelink 정병관; 유승화; et al, 한국과학기술원, 2018 |
2216 | 분자동역학 시뮬레이션을 통한 촉매 금속-탄화수소 표면 반응 모사 = Investigation of reaction between catalyst metal surface and hydrocarbon by using molecular dynamics simulationlink 배민석; Bae, Min Seok; et al, 한국과학기술원, 2015 |
2217 | 분출 가스 압력을 받고 있는 고체의 동적 거동 해석 = Dynamic response of a solid subjected to pressure loading due to gushing gas flowlink 김민하; Kim, Min-Ha; et al, 한국과학기술원, 1998 |
2218 | 분할구조 해석 기법을 이요한 수정된 Lanczos 방법 = A modified Lanczos'method combined with substructure analysis techniquelink 정길호; Jung, Gil-Ho; et al, 한국과학기술원, 1992 |
2219 | 불규칙 파랑하중에 대한 고정해양구조물의 동력학적 연구 = Dynamic analysis of fixed offshore structures subjected to random wave forceslink 최정호; Choi, Jung-Ho; et al, 한국과학기술원, 1984 |
2220 | 불안정 곡선난류유동의 계산을 위한 곡률의존 2-방정식모델의 확장 = Extention of curvature dependent 2-equation model for computation of unstably curved turbulent flowslink 조규식; Cho, Gyu-Sik; et al, 한국과학기술원, 1993 |