Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Author Gweon, Dae-Gab

Showing results 1 to 60 of 489

1
3D confocal reconstruction using optical sectioninng (invited paper)

Seo, J.W.; Kang, D.K.; Gweon, Dae-Gab, OSA annual meeting/ILSXYII, pp.72 - 72, 2001-10

2
3D image reconstruction using optical sectioning in confocal scanning microscopy

Seo J.W.; Kang D.K.; Park S.L.; Gweon, Dae-Gab, Optomechatronic Systems II, pp.58 - 65, SPIE, 2001-10-29

3
3개의 모터로 구동되는 hybrid locomotion vehicle(HLV)의 구조설계 및 주행분석 = Design and motion analysis of a hybrid locomotion vehicle(HLV) controlled by three motorslink

염도성; Yeom, Do-Seong; et al, 한국과학기술원, 1990

4
6-axis fine actuator with VCMs and solenoids

Kim, K.H.; Kim, D.M.; Gweon, Dae-Gab, The 1st Korea-japan conference on positioning technology, pp.176 - 179, 2002-10-15

5
6-Axis ultraprecision positioning mechanism design and positioning control = 6축 초정밀 위치결정 기구의 설계와 제어에 관한 연구link

Ryu, Jae-Wook; 류재욱; et al, 한국과학기술원, 1997

6
6자유도 능동 제진 시스템을 위한 제어기 설계에 관한 연구 = A study on design of controller for six degree of freedom active vibration isolation systemlink

김현창; Kim, Hyun-Chang; et al, 한국과학기술원, 2009

7
A 3-DOF Z-tilts MicroPositioning System using Electromagnetic Actuator with Air Bearings

Lee, S.Q.; Gweon, Dae-Gab, ASPE Annual Meeting, pp.478 - 481, 1997

8
A calibrated atomic force microscope using an orthogonal scanner and a calibrated laser interferometer

Lee, Dong-Yeon; Kim, Dong-Min; Gweon, Dae-Gab; Park, Jinwon, APPLIED SURFACE SCIENCE, v.253, no.8, pp.3945 - 3951, 2007-02

9
A calibration and range-data extraction algorithm for an omnidirectional laser range finder of a free-ranging mobile robot

Cha, YY; Gweon, Dae-Gab, MECHATRONICS, v.6, no.6, pp.665 - 689, 1996-09

10
A comparative analysis of voice coil motors with multisegmented and conventional magnet arrays for rotating data storage devices

Lee, MG; Jeong, J; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS, v.42, no.6A , pp.3394 - 3395, 2003-06

11
A dynamic parameter identification method for the PUMA-760 robot

Moon, J. I.; Chung,W. K.; Cho, Hyungsuck; Gweon, Dae-Gab, International Symposium on Industrial Robot, pp.55 - 65, 1986

12
A Flexure Guided Planar Scanner for Scanning Probe Microscope; Part1: Design and Analysis of Static and Dynamic Properties

dong-yeon lee; moo-yeon lee; Gweon, Dae-Gab, 한국소음진동공학회논문집, v.15, no.6, pp.667 - 673, 2005

13
A Flexure Hinge Mechanism for Atomic Force Microscopy

Gweon, Dae-Gab; Moon, K.S.; Chung, H.W.; Shim, J.Y.; Ryu, J.W., Int. Conf. on Micromechatronics for Information and Precision Equipment, pp.286 - 290, 1997

14
A framework for the evaluation and selection of assembly plans

Park, J. H.; Gweon, Dae-Gab; Chung, M. J., Int. Conf. on Industrial Electronics, Control and Instrumentation,, pp.1215 - 1220, 1991

15
A High precision positioning XY-theta stage with simple actuator

Lee, S-Q; Lee, M-G; Chung, M-J; Gweon, Dae-Gab, Int. Conf. on Mechatronic Technology, pp.315 - 320, 1999-10

16
A High-Precision Dual-Servo Stage Using Halbach Linear Active Magnetic Bearings

Choi, Young-Man; Gweon, Dae-Gab, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.16, no.5, pp.925 - 931, 2011-10

17
A high-speed miniature screening gaschromatograph with flame ionization detector

Banik, R; Lee, DY; Gweon, Dae-Gab, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.19, no.12, pp.2197 - 2204, 2005-12

18
A Laser Interferometric Microscope with Nanometer Lateral Resolution

Gweon, Dae-Gab; Park, S.; Moon, K.S., International Precision Engineering Seminar, pp.156 - 159, 1997

19
A Laser Scaner Calibration Algorithm for Mobile Robot

Cha, Y.Y.; Gweon, Dae-Gab, Proceedings of the 12th Annual Conference of Robotics Society of Japan, pp.885 - 888, 1994

20
A Long Stroke and Ultra-precision XY-Theta Stageusing Simple Linear DC Servo Actuators

Lee, S.Q.; Gweon, Dae-Gab, ASPE Annual Meeting, pp.341 - 344, 1997

21
A method of optimal design for minimization of force ripple in linear brushless permanent magnet motor

Gweon, Dae-Gab; Chung, MJ; Lee, MG; Lee, .Q.; Kim, .M., IEEE/IAS, pp.36 - 39, IEEE, 2000-10

22
A Method of Optimal Design for Minimization of Force Ripple in Long Stroke Precision Linear Actuator with BLPMM

Gweon, Dae-Gab; Chung, Myung J.; Lee, Moon Gu, ASPE annual meeting, pp.365 - 368, ASPE, 2000-10-22

23
A millimeter-range flexure-based nano-positioning stage using a self-guided displacement amplification mechanism

Kim, Jung-Jae; Choi, Young-Man; Ahn, Da-Hoon; Hwang, Beom-Seok; Gweon, Dae-Gab; Jeong, Jae-Hwa, MECHANISM AND MACHINE THEORY, v.50, pp.109 - 120, 2012-04

24
A neural network approach based on interference pattern analysis: Application to an autoalignment method for the focusing unit of NFR system

Yoon, HK; Gweon, Dae-Gab; Lee, JH; Jeong, J; Oh, HR, JAPANESE JOURNAL OF APPLIED PHYSICS, v.43, no.7B, pp.4790 - 4794, 2004-07

25
A new 3-DOF Z-tilts micropositioning system using electromagnetic actuators and air bearings

Lee S.-Q.; Gweon, Dae-Gab, PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, v.24, no.1, pp.24 - 31, 2000

26
A new approach to translational laminographic method for PCB inspection

An, J.; Cho, Y.-B.; Gweon, Dae-Gab, CIRCUIT WORLD, v.24, no.2, pp.14 - 20, 1998

27
A new criterion for quality monitoring of pulsed laser spot welding using an infrared sensor - Part 1: the radiation feature as a criterion for quality monitoring

Lim, DC; Gweon, Dae-Gab, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.213, no.1, pp.41 - 49, 1999

28
A new criterion for quality monitoring of pulsed laser spot welding using an infrared sensor - Part 2: quality estimation using an artificial neural network

Lim, DC; Gweon, Dae-Gab, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.213, no.1, pp.51 - 57, 1999

29
A new damping scheduling proximate time optimal servomechanism

Choi Y.-M.; Jeong J.; Gweon, Dae-Gab; Kim J.-J., 2006 American Control Conference, pp.321 - 326, 2006-06-14

30
A new design and kinematic analysis of 3-axis motion stage for ellipsometer

Jeong, J-H; Park, S-L; Seo, J-W; Gweon, Dae-Gab, Int. Conf. on Mechatronic Technology, pp.327 - 329, 1999-10

31
A new magnetic bearing using Halbach magnet arrays for a magnetic levitation stage

Choi, Young-Man; Lee, Moon G.; Gweon, Dae-Gab; Jeong, Jaehwa, REVIEW OF SCIENTIFIC INSTRUMENTS, v.80, no.4, 2009

32
A new method for image separation of overlapped images from a two-layered printed circuit board(PCB)

Gweon, Dae-Gab; An, Jin Ung; Cho, Young Bin, IMAGE AND VISION COMPUTING, v.15, no.11, pp.861 - 866, 1997-11

33
A New Mode Switching Control for Fast Settling and High Precision Positioning

Kim, JJ; Choi,YM; Kim, MH; Gweon, Dae-Gab, ASPE 2006 Proceedings of 2006 annual ASPE meeting, 2006-10-15

34
A new nano-accuracy AFM system for minimizing Abbe errors and the evaluation of its measuring uncertainty

Kim, Dongmin; Lee, Dong Yeon; Gweon, Dae-Gab, ULTRAMICROSCOPY, v.107, no.4-5, pp.322 - 328, 2007-04

35
A New Type of Pick-up Actuator using a Leaf SpringSuspension

Kim, S.M.; Gweon, Dae-Gab, International Symposium on Optical Memory, pp.196 - 197, 1997-10

36
A new type of spectral FLIM : Improving accuracy of lifetime measurement

Jeong, Hyeong-Jun; Ahn, Jin-Woo; Lee, Dong-Ryoung; Gweon, Dae-Gab, Focus on Microscopy 2012, 2012-04-03

37
A new type of spectrometer for confocal-spectral microscopy

Do D.; Chun W.; Gweon, Dae-Gab, 2010 International Symposium on Optomechatronic Technologies, ISOT 2010, 2010-10-25

38
A Nondestructive Inspection of Laser Spot Weldingusing IR Senser

Lim, D.C.; Cho,Y.B.; Gweon, Dae-Gab, Pacific Conference on Manufacturing, pp.617 - 622, 1996

39
A novel damping scheduling scheme for proximate time optimal servomechanisms in hard disk drives

Choi, YM; Jeong, J; Gweon, Dae-Gab, IEEE TRANSACTIONS ON MAGNETICS, v.42, pp.468 - 472, 2006-03

40
A novel laser micro/nano-machining system for FPD process

Kim, Kihyun; Choi, Young-Man; Gweon, Dae-Gab; Lee, Moon G., JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.497 - 501, 2008-05

41
A novel mode switching control for fast settling and high precision positioning

Kim J.-J.; Choi Y.-M.; Gweon, Dae-Gab, International Conference on Control, Automation and Systems, ICCAS 2007, pp.1656 - 1659, Institute of Control, Robotics and Systems, 2007-10-17

42
A Precision 3-axis stage for AFM scanner

Shim, J-Y; Chung, H-W; Gweon, Dae-Gab, Int. Conf. on Mechatronic Technology, pp.341 - 344, 1999

43
A robotic assembly of flexible parts using a pneumatic vibratory wrist,

Moon, C. Y.; Cho, Hyungsuck; Gweon, Dae-Gab, CADMAT Computer Aided Technology, pp.176 - 183, 1988

44
A six-degree-of-freedom magnetic levitation fine stage for a high-precision and high-acceleration dual-servo stage

Kim, Myeong-Hyeon; Jeong, Jae Heon; Kim, HyoYoung; Gweon, Dae-Gab, SMART MATERIALS AND STRUCTURES, v.24, no.10, 2015-10

45
A spectral detector using the dispersion of an acousto-optic tunable filter for confocal spectral imaging microscopy

Song, InCheon; Gweon, Dae-Gab, MEASUREMENT SCIENCE & TECHNOLOGY, v.19, no.8, 2008-08

46
A stage based on voice coil motor with high speed and long range for laser micro/nano fabrication

Kim K.; Gweon, Dae-Gab; Jung H.S.; Lee S.-H.; Hong M.-S.; Lee M.G., Key Engineering Materials, v.345-346 I, pp.757 - 760, 2007-08

47
A Stage based on Voice Coil Motor with High Speed and Long Range for Laser Micro/Nano Fabrication

Gweon, Dae-Gab; Kihyun Kim; Hyun Soo Jung; Soo-Hun Lee; Min-Sung Hong; Moon G. Lee, Key Engineering Materials, Trans Tech Publications Ltd., 2007-08

48
A state estimator design for multimodal adjustment process using genetic algorithm

Cho, Deok Je; Gweon, Dae-Gab, MECHATRONICS, v.9, no.2, pp.163 - 183, 1999-03

49
A Study on a Novel 3-DOF Spherical Motor with the VCM Principle

Kim, Hyunchang; Kim, Hyoyoung; Woo, Siwoong; Lee, Hakjun; Gweon, Dae-Gab, 26th(2011) Annual Meeting of the American Society for Precision Engineering, 2011-11-16

50
A study on improvement of efficiency to enhance the contrast for confocal microendoscope with GRIN probe

Ahn, JW; Kim,TJ; Gweon, Dae-Gab, Focus on Microscopy 2008, 2008-04-13

51
A surface current density model of magnetic suspension for optical pickup heads

Lee, M. G.; Gweon, Dae-Gab; Jung,H. W.; Lee, K. C.; Chae, C. Y., ASPE Annual Meeting, pp.391 - 394, ASPE, 1998-10

52
(A) new method for image separation from overlapped image on the two-layered PCB = 양면 실장 기판의 X선 중첩 영상의 분리에 관한 연구link

An, Jin-Ung; 안진웅; et al, 한국과학기술원, 1997

53
(A) study on alignment automation of multi-lens using neural network and interferometer : application to focusing unit in near field recording system = 신경회로망과 간섭계를 이용한 다군 렌즈 정렬 자동화에 관한 연구 : 근접장 정보저장 기기에의 응용link

Yoon, Hyoung-Kil; 윤형길; et al, 한국과학기술원, 2005

54
(A) study on the determination of accurate inverse kinematics in a high precision magnetic levitation system = 자기부상 초정밀 시스템의 정확한 인버스 키네마틱스 결정에 관한 연구link

Jeong, Jae-heon; Gweon, Dae-Gab; et al, 한국과학기술원, 2017

55
(A) study on the optimum design of a pick-up actuator using a time optimal technique = 시간최적화 기법을 이용한 광픽업 구동기의 최적설계에 관한 연구link

Kim, Sun-Mo; 김선모; et al, 한국과학기술원, 2001

56
(A) three-axis nanopositioning slider design, analysis and control = 3축 나노위치결정 슬라이더의 설계, 해석 및 제어에 관한 연구link

Shim, Jong-Youp; 심종엽; et al, 한국과학기술원, 2004

57
ABERRATION CORRECTED BEAM SCANNING STIMULATED EMISSION DEPLETION MICROSCOPY

Yoo, Hongki; Song, Incheon; Gweon, Dae-Gab, INTERNATIONAL JOURNAL OF OPTOMECHATRONICS, v.2, no.4, pp.401 - 412, 2008

58
Accurate Measurement of the Out-of-plane Motion of a Tip-scanning Atomic Force Microscope

Lee, Dong-Yeon; Gweon, Dae-Gab, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.10, no.1, pp.119 - 121, 2009-01

59
Additional imaging optics for soft x-ray microscope

Gweon, Dae-Gab, EUspen 4th international conference, 2004-05-31

60
AFM scanner용 초정밀 XYZ 스테이지의 설계, 특성분석 및 제어에 관한 연구 = A precision XYZ-stage for AFM scanner design, analysis and controllink

심종엽; Shim, Jong-Youp; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0