1261 | Software-reprogrammable shape-morphing technology based on distributed actuation / sensing = 분포형 엑추에이션 / 센싱 기반의 소프트웨어 재프로그래밍이 가능한 형상 변환 기법link Park, Hyunkyu; 박현규; et al, 한국과학기술원, 2024 |
1262 | Solidified crust formation and its effect on heat transfer between two separated horizontal liquid layers = 용융금속의 고화층 형성과 고화층이 분리된 두 수평 유체층 사이의 열전달에 미치는 영향link Park, Rae-Joon; 박래준; et al, 한국과학기술원, 1998 |
1263 | Sound field reproduction by using an array of loudspeakers = 스피커 어레이를 이용한 음장 재현link Chang, Ji-Ho; 장지호; et al, 한국과학기술원, 2011 |
1264 | Sound quality evaluation of non-stationary noise and its application to vehicle booming noise = 비정상 소음의 음질 평가 방법 및 자동차 부밍 소음에의 적용link Shin, Sung-Hwan; 신성환; et al, 한국과학기술원, 2004 |
1265 | Sound visualization by using enhanced planar acoustic holographic reconstruction = 개선된 평면 음향 홀로그래피를 이용한 음장의 가시화link Kwon, Hyu-Sang; 권휴상; et al, 한국과학기술원, 1997 |
1266 | Spacecraft trajectory correction maneuver design using the improved B-plane targeting method = 개선된 B평면 조준법을 이용한 인공위성의 궤적보정기동 설계link Cho, Dong-Hyun; 조동현; et al, 한국과학기술원, 2012 |
1267 | Spatial manipulation and implementation of sound = 소리의 공간 제어 방법론link Choi, Jung-Woo; 최정우; et al, 한국과학기술원, 2005 |
1268 | Spatially and temporally extended state space for multilayered reinforcement learning in cognitive developmental robot = 인지 발달 로봇을 위한 다계층 강화학습의 시공간적으로 확장된 상태공간link Yang, Jeong-Yean; 양정연; et al, 한국과학기술원, 2011 |
1269 | Spectral domain optical coherence tomography using multi-line single camera spectrometer = 멀티라인 싱글 카메라 분광기를 이용한 스펙트럼 영역 광결맞음 단층촬영장치link Song, Cheol; 송철; et al, 한국과학기술원, 2010 |
1270 | Spline-based meshfree method and its application to the analysis of bulk metal forming processes = 스플라인기반 무요소법 연구 및 이의 금속체적성형공정 해석 적용에 관한 연구link Hah, Zoo-Hwan; 하주환; et al, 한국과학기술원, 2014 |
1271 | SRS inversion for measurement of temperature profile in a combustion gas layer : numerical simulations & experimental applications = 연소가스의 온도분포 측정을 위한 SRS 역계산link Kim, Hyun-Keol; 김현걸; et al, 한국과학기술원, 2004 |
1272 | Stability analysis and control design of haptic systems using input-to-state stability = 입력-상태 안정성을 이용한 햅틱 시스템의 안정성 분석 및 제어기 설계link Kim, Suyong; Lee, Doo Yong; et al, 한국과학기술원, 2022 |
1273 | Stability analysis of interface of two-phase flow with heat and mass transfer using viscous potential flow = 점성포텐셜이론을 이용한 열 및 물질전달이 있는 이상유체 계면의 안정성 연구link Kim, Hyung-Jun; 김형준; et al, 한국과학기술원, 2009 |
1274 | Stability and performance of haptic interface with active/passive actuators = 능동형/수동형 구동기를 갖는 햅틱 인터페이스의 안정성과 성능link An, Jin-Ung; 안진웅; et al, 한국과학기술원, 2005 |
1275 | Stability guaranteed backstepping control of nonlinear uncertain systems using time delay estimation and nonlinear damping = 시간 지연 추정과 비선형 감쇠를 이용한 비선형 불확정성 시스템의 안정성을 보장하는 백스테핑 제어기에 관한 연구link Jin, Yi; 김의; et al, 한국과학기술원, 2012 |
1276 | Stability guaranteed control for teleoperators : time domain passivity approach = 원격조종 시스템의 안정성 보장 제어기 : 시간 영역에서의 수동성을 이용한 접근link Ryu, Jee-Hwan; 유지환; et al, 한국과학기술원, 2002 |
1277 | Stability of flexible rotors subjected to nonconservative torque and force = 비보존 토오크 및 힘을 받는 탄성 회전체의 안정성link Yun, Jong-Seop; 윤종섭; et al, 한국과학기술원, 1995 |
1278 | Stability of homing guidance loop with missile dynamics = 미사일 다이내믹스를 고려한 호우밍 유도 루우프의 안정성 해석link Rew, Dong-Young; 류동영; et al, 한국과학기술원, 1996 |
1279 | Stability, versatility and turning motion of limit cycle walking model = 한계순환 보행 모델의 안정성, 기능성 및 선회 운동에 관한 연구link Jeon, Yonggwon; 전용권; et al, 한국과학기술원, 2015 |
1280 | State estimator for legged robots under diverse contact conditions = 다양한 접촉 조건에서의 족형 로봇 상태 추정기link Kim, Joon-Ha; 김준하; et al, 한국과학기술원, 2024 |
1281 | Statistical analysis of sloshing loads and performance of slosh-induced energy harvesting = 슬로싱 하중의 통계적 분석과 슬로싱 유발 에너지하베스팅의 성능link Kim, Ki Jong; 김기종; et al, 한국과학기술원, 2023 |
1282 | Statistical model calibration considering identifiability under insufficient data environment = 불충분한 데이터 환경하에서 식별성을 고려한 통계적 모델보정link Choo, Jeonghwan; 추정환; et al, 한국과학기술원, 2023 |
1283 | STEP 데이터베이스 기반 CAD 시스템에서 형상 데이터 관리 = Shape data management in a CAD system based on the STEP databaselink 김준환; Kim, Jun-Hwan; et al, 한국과학기술원, 2003 |
1284 | STEP 방법론을 따른 CAD 데이터의 가공과 공유 = Enhancement to share CAD models based on STEP methodologylink 신용재; Shin, Yong-Jae; et al, 한국과학기술원, 1999 |
1285 | Stiffener layout optimization to maximize natural frequencies of a structure using evolution strategies and geometry algorithms = 진화 전략 및 기하 알고리즘을 이용한 구조물의 고유 진동수 극대화를 위한 보강재 배치 최적화link Lee, Joon-Ho; 이준호; Park, Youn-Sik; Park, Young-Jin; et al, 한국과학기술원, 2005 |
1286 | Stochastic estimation of human forearm and wrist impedance using robots = 로봇을 이용한 사람 전완과 손목 관절 임피던스의 추계학적 추정link Park, Kyung-Bin; 박경빈; et al, 한국과학기술원, 2012 |
1287 | Strain localization in an orthotropic elastoplastic and elasto-viscoplastic material = 직교이방 탄소성 및 탄-점소성 재료의 변형률 집중link Lee, Haeng-Soo; 이행수; et al, 한국과학기술원, 1995 |
1288 | Strain localization in thermoviscoplastic materials = 열점소성 재료에서의 변형률 집중link Kim, Hyun-Gyu; 김현규; et al, 한국과학기술원, 1998 |
1289 | Strain-based real-time shape estimation of the rotating structures using distributed fiber optic sensors = 분포형 광섬유 센서를 이용한 변형률 기반 실시간 회전 구조물의 변형 예측link Kim, Hong-Il; 김홍일; et al, 한국과학기술원, 2012 |
1290 | Strain-rate dependent anisotropic yield criteria for auto-body steel sheets = 자동차용 강판의 변형률속도 의존 이방성 항복함수에 관한 연구link Huh, Jee-Hyang; 허지향; et al, 한국과학기술원, 2013 |
1291 | Strain-smoothed element method for improving low-order solid and shell finite elements = 저차 솔리드 및 쉘 유한요소의 향상을 위한 변형률 완화 요소법link Lee, Chaemin; Lee, Phill-Seung; et al, 한국과학기술원, 2020 |
1292 | Stretched leg walking for a humanoid robot = 인간형 이족 보행 로봇의 다리를 펴고 걷는 보행에 관한 연구link Kim, Min-Su; 김민수; et al, 한국과학기술원, 2009 |
1293 | Structural health monitoring in low earth orbit environment using fiber bragg grating sensors = 저궤도 우주환경하에서 광섬유 브래그 격자 센서를 이용한 구조 건전성 모니터링link Park, Sang-oh; 박상오; et al, 한국과학기술원, 2010 |
1294 | Structural health monitoring of composite pressure vessels using fiber bragg grating sensors = 광섬유 브래그 격자 센서를 이용한 복합재료 압력용기의 구조 건전성 모니터링link Park, Sang-Wuk; 박상욱; et al, 한국과학기술원, 2008 |
1295 | Structural integrity investigation of optical window under thermal environment of scramjet intake. = 스크램제트 흡입구 열환경에서 광학창의 구조적 건전성 연구link Kim, Gyeongrok; 김경록; et al, 한국과학기술원, 2023 |
1296 | Structural system identification and strain measurement based model updating with closed-loop data = 페루프 정보를 이용한 구조 시스템 규명 및 스트레인 측정 기반의 모델 개선link Ha, Jae-Hoon; 하재훈; Park, Young-Jin; 박영진; et al, 한국과학기술원, 2007 |
1297 | Structures and statistics of an adverse pressure gradient turbulent boundary layer = 역압력 구배 난류 경계층의 구조와 통계link Yoon, Min; Sung, Hyung Jin; et al, 한국과학기술원, 2019 |
1298 | Studies on Design and Properties of Metal-supported Solid Oxide Fuel Cell: Electrode material, Cell and Stack = 금속지지체형 고체산화물 연료전지의 설계 및 특성에 관한 연구 : 전극물질, 셀, 스택link Baek, Seung-Wook; 백승욱; et al, 한국과학기술원, 2010 |
1299 | Studies on mass transfer enhancement in a cathode channel of a polymer electrolyte membrane fuel cell using a pulsating flow = 고분자 전해질막 연료전지 공기극에서의 맥동유동을 이용한 물질전달 촉진에 관한 연구link Han, Hun-Sik; 한훈식; et al, 한국과학기술원, 2012 |
1300 | Studies on reaction rate and effectiveness factor of noble metal catalysts for fuel processing = 연료개질용 귀금속 촉매의 반응속도와 유효인자에 대한 연구link Lim, Sung-Kwang; 임성광; et al, 한국과학기술원, 2009 |
1301 | Study of a throat plug in a shock tunnel = Shock Tunnel에서의 Throat Plug에 대한 연구link Lee, Jong-Kook; 이종국; Kwon, Oh-Joon; 권오준; et al, 한국과학기술원, 2012 |
1302 | Study of cobalt-based perovskite cathodes for intermediate temperature-operating solid oxide fuel cell = 중.저온형 고체산화물 연료전지를 위한 Cobalt 기반 페로브스카이트 구조의 공기극 특성에 관한 연구link Kim, Jung-Hyun; 김정현; et al, 한국과학기술원, 2009 |
1303 | Study of diesel low temperature steam reforming for solid oxide fuel cell application = 고체산화물 연료전지 적용을 위한 디젤 저온 수증기 개질에 관한 연구link Lee, Sangho; 이상호; et al, 한국과학기술원, 2015 |
1304 | Study of discrete tonal noise of NACA0015 airfoil at low reynolds numbers = 저 레이놀즈 수에서의 NACA0015 익형의 이산 소음 연구link Amealda, Dianne Binti Andan; Lee, Duck-Joo; et al, 한국과학기술원, 2018 |
1305 | Study of population inversion and laser beam generation in DF chemical laser system = 불화중수소 화학레이저의 밀도반전 및 레이저 발진에 대한 연구link Park, Jun-Sung; 박준성; et al, 한국과학기술원, 2005 |
1306 | Study of surface roughness effect on forebody aerothermodynamics = 표면 조도에 따른 선두부 열공력 특성 연구link Park, Sangha; Park, Gisu; et al, 한국과학기술원, 2022 |
1307 | Study on a critical heat flux model for pool boiling based on two different mechanisms: rewetting limit and capillary limit = 서로 다른 두 개의 기작에 기반한 풀비등 임계열유속 모델에 관한 연구: 젖음 한계와 모세관력 한계link Kim, Minchang; Kim, Sung Jin; et al, 한국과학기술원, 2022 |
1308 | Study on an auto-landing guidance for UAV with engine flame-out = 무인항공기 엔진 정지 시 자동착륙 유도에 대한 연구link Kim, Young-Sam; Tahk, Min-Jea; et al, 한국과학기술원, 2019 |
1309 | Study on carbon monoxide preferential oxidation over copper/ceria based catalysts for low temperature proton exchange membrane fuel cell system = 저온 고분자 전해질 연료전지 시스템을 위한 Copper/Ceria계 촉매의 일산화탄소 선택적 산화반응에 관한 연구link Oh, Jiwoo; Bae, Joongmyeon; et al, 한국과학기술원, 2018 |
1310 | Study on effective self-learning for aerial vehicles using emulated flight test environment based on magnetic levitation = 자기부상 풍동 기반 지상 모사 비행시험을 통한 무인기의 효율적 자가 학습에 관한 연구link Sung, Yeol-Hun; Han, Jae-Hung; et al, 한국과학기술원, 2021 |
1311 | Study on electrochemical performance and Cr poisoning phenomena at $(Ba,Sr)(Co,Fe)O3_{-δ}$ Cathode for Solid Oxide Fuel Cell = 고체산화물 연료전지용 $(Ba,Sr)(Co,Fe)O3_{-δ}$ 공기극의 전기화학적 특성 및 Cr 피독현상에 관한 연구link Kim, Yu-Mi; 김유미; et al, 한국과학기술원, 2011 |
1312 | Study on envelopes for vacuum maintenance of vacuum insulation panels = 진공단열패널의 진공 유지를 위한 외피에 관한 연구link Jung, Hae-Yong; 정해용; et al, 한국과학기술원, 2013 |
1313 | Study on fabrication and electrode properties for butane-fueled intermediate temperature solid oxide fuel cell = 부탄 연료를 이용한 중온형 고체산화물 연료전지의 제조 및 전극물성연구link Park, Kwang-jin; 박광진; et al, 한국과학기술원, 2010 |
1314 | Study on fabrication process and electrochemical properties of metal-supported solid oxide fuel cells = 금속지지체형 고체산화물 연료전지의 제조공정 및 전기화학특성link Lee, Chang-bo; 이창보; et al, 한국과학기술원, 2008 |
1315 | Study on filling materials and vacuum maintenance for vacuum insulation panels = 진공단열체의 내부 충진재 및 진공도 유지에 관한 연구link Kwon, Jae-Sung; 권재성; et al, 한국과학기술원, 2010 |
1316 | Study on filtration for extremely compressible cakes = 초압축성 케이크의 여과에 관한 연구link Kim, Sung Il; Kim, Sung Jin; et al, 한국과학기술원, 2018 |
1317 | Study on flow and pressure sensors using electrokinetic energy conversion phenomena in microchannels and nanochannels = 마이크로 채널 및 나노 채널 내의 동전기적 에너지 변환 현상을 이용한 유량 센서 및 압력 센서에 관한 연구link Kim, Dong-Kwon; 김동권; et al, 한국과학기술원, 2007 |
1318 | Study on flow sensors : a micro-thermal flow sensor and a flow sensor using dielectric barrier discharge = 미소 열식 유량 센서 및 유전체 방전을 이용한 유량 센서에 관한 연구link Kim, Tae-Hoon; 김태훈; et al, 한국과학기술원, 2009 |
1319 | Study on gas permeation and accelerated life test of vacuum insulation panels = 진공단열재의 가스 침투 및 가속화 수명 테스트에 관한 연구link Yeo, Inseok; 여인석; et al, 한국과학기술원, 2015 |
1320 | Study on gasoline on-board exhaust gas reforming system for hydrogen production in vehicle = 자동차 내 수소 생산을 위한 배기가스 이용 가솔린 개질 시스템에 관한 연구link Choi, Seung hyeon; 최승현; et al, 한국과학기술원, 2017 |