1089 | 박막형 TCO/CdS/CdTe 태양전지용 CdS와 CdTe 박막의 제조 및 특성에 관한 연구 = A study on the fabrication and characterization of CdS and CdTe thin films for TCO/CdS/CdTe thin film solar cellslink 정길룡; Chung, Gil-Yong; et al, 한국과학기술원, 1995 |
1090 | 반강유전 $Pb(Yb_{1/2}Nb_{1/2})O_3$의 결정구조 및 복합페롭스카이트 고용계의 유전 및 압전성질에 관한 연구 = Analysis of the crystal structure, dielectric and piezoelectric properties in antiferroelectric $Pb(Yb_{1/2}Nb_{1/2})O_3$ -based perovskite solution systemslink 임훈; Lim, Hoon; et al, 한국과학기술원, 1997 |
1091 | 반강유전체 $Pb(Yb_{1/2}Nb_{1/2})O_3$의 결정 구조 및 Domain 구조에 관한 연구 = Crystal and domain structures of antiferroelectric $Pb(Yb_{1/2}Nb_{1/2})O_3$link 박규호; Park, Kyu-Ho; et al, 한국과학기술원, 1999 |
1092 | 반금속 호이슬러 합금을 이용한 자기터널접합에 관한 연구 = A study on magnetic tunnel junctions with half-metallic Heusler alloyslink 임우창; Lim, Woo-Chang; et al, 한국과학기술원, 2008 |
1093 | 반도체 배선용 Cu 박막의 reflow 및 응집 특성 = Reflow and agglomeration of Cu thin films for the interconnect in semiconductor deviceslink 이승윤; Lee, Seung-Yun; et al, 한국과학기술원, 1999 |
1094 | 반도체 배선용 구리 전기도금막의 Self-annealing 기구분석 = Analysis of self-annealing mechanism in electroplated Cu thin film for the interconnect of semiconductor deviceslink 이창희; Lee, Chang-Hee; et al, 한국과학기술원, 2003 |
1095 | 반도체성 TiO2부동태 피막 및 수소 장입된 $TiO_2$부동태 피막에서 전자결함에 대한 연구 = Electronic defects in uncharged and hydrogen-charged semiconductive passivating $TiO_2$ filmslink 김창하; Kim, Chang-Ha; et al, 한국과학기술원, 1991 |
1096 | 반응기체의 분압이 $Al_2O_3$ 의 화학증탁에 미치는 영향에 관한 연구 = Effect of partial pressure of reactantgas on the chemical vapor deposition of $Al_2O_3$link 김재곤; Kim, Jae-Gon; et al, 한국과학기술원, 1982 |
1097 | 반응성 동시 스퍼터링에 의한 Pb(Zr, Ti)$O_3$ 박막의 제조 및 구조적, 전기적 물성에 관한 연구 = Preparation of Pb(Zr, Ti)$O_3$ thin films by reactive cosputtering and their structural and electrical propertieslink 김광영; Kim, Kwang-Young; et al, 한국과학기술원, 1993 |
1098 | 반응성 스퍼터링 법으로 제조한 ZnO계 자성 반도체의 성장과 물성에 대한 연구 = Growth and properties of ZnO-based magnetic semiconductors by reactive sputteringlink 김현중; Kim, Hyun-Jung; et al, 한국과학기술원, 2005 |
1099 | 반응성 스퍼터링법에 의해 제조된 PZT 박막의 특성 평가와 압전형 미소기동기 제작에 관한 연구 = A study on the properties of PZT films prepared by reactive sputtering method and the fabrication of piezoelectric microactuatorlink 남효진; Nam, Hyo-Jin; et al, 한국과학기술원, 1998 |
1100 | 반응혼합공정에 의한 스치렌의 폴리에틸렌 그라프트 공중합에 관한 연구 = Grafting of styrene onto polyethylene via reactive blendinglink 김병선; Kim, Byung-Sun; et al, 한국과학기술원, 1998 |
1101 | 방향성 규소강판에서의 2차 재결정 기구에 관한 연구 = A study on the mechanism of secondary recrystallization in grain-oriented silicon-ironlink 이희균; Lee, Hee-Gyoun; et al, 한국과학기술원, 1986 |
1102 | 배향성 PZT 박막제조와 배향성기구 분석 및 전기적특성에 관한 연구 = Fabrication, analysis of growth mechanism and electrical properties of aligned PZT thin filmslink 김창정; Kim, Chang-Jung; et al, 한국과학기술원, 1995 |
1103 | 백색 LED용 풀컬러 형광색소 결합 실록산 나노하이브리드 광전환체 = Full-color dye-bridged siloxane nanohybrid spectral converter for white LEDslink 곽승연; Kwak, Seung-Yeon; et al, 한국과학기술원, 2012 |
1104 | 변형량과 입계 구조가 구리의 입자성장에 미치는 영향 = Effects of deformation and grain boundary structure on grain growth in Culink 구재본; Koo, Jae-Bon; et al, 한국과학기술원, 2000 |
1105 | 분무적층공정에 의한 Al-Zn계 제진합금의 개발에 관한 연구 = A study on the development of high damping Al-Zn base alloys by spray deposition processlink 문병철; Moon, Byeong-Cheol; et al, 한국과학기술원, 2000 |
1106 | 분위기 조절에 의한 $SrTiO_3$계 재료의 계면 이동과 유전 성질 = Atmosphere control of interface migration and dielectric property of $SrTiO_3$-based materialslink 전재호; Jeon, Jae-Ho; et al, 한국과학기술원, 1994 |
1107 | 분자선 성장법에 의한 갈륨비소 전력소자의 공정 및 전기적 특성 분석에 관한 연구 = A study on GaAs MBE-grown power device and its electrical charateristicslink 맹성재; Maeng, Sung-Jae; et al, 한국과학기술원, 1996 |
1108 | 분자선 에피탁시로 InP기판위에 성장된 InGaAs와 InAlAs에피층들에서의 상분리현상 및 결정학적 품위에 관한 연구 = Phase separation and crystalline quality in InGaAs and InAlAs layers grown on InP substrate by MBElink 최정식; Choi, Jung-Sik; et al, 한국과학기술원, 1997 |
1109 | 분자선 증착법으로 $SiO_2$ 위에 증착한 $Si_{1-x}Ge_x$ 박막의 결정 성장에 관한 투과 전자 현미경 연구 = A transmission electron microscopy study of the crystal growth of $Si_{1-x}Ge_x$ films Deposited on $SiO_2$ by molecular beam depositionlink 김홍승; Kim, Hong-Seung; et al, 한국과학기술원, 1999 |
1110 | 분할 화학증착방법으로 증착된 알루미늄 박막의 선택성 및 표면 morphology 개선에 관한 연구 = A study on the improvement of the selectivity and surface morphology of al thin film by cycle chemical vapor depositionlink 안상덕; Ahn, Seong-Deok; 강상원; 천성순; et al, 한국과학기술원, 2000 |
1111 | 불연속 석출에 미치는 연속 석출의 영향 = The effects of continuous precipitation on the kinetics of discontinuous precipitationlink 김원준; Kim, Wan-Jun; et al, 한국과학기술원, 1992 |
1112 | 붕소와 탄소가 단결정용 니켈기 초내열합금의 결함수용성에 미치는 효과 = Effect of boron and carbon on the defect tolerability of a nickel base single crystal superalloylink 김두현; Kim, Doo-Hyun; et al, 한국과학기술원, 2003 |
1113 | 붕화 티탄의 소결 거동 및 탄화 붕소-붕화 티탄 복합체의 인성 강화 기구에 관한 연구 = A stufy on the sintering behavior of $TiB_2$ and the toughening mechanism of $B_4C-TiB_2$ particulate compositelink 강을손; Kang, Eul-Son; et al, 한국과학기술원, 1989 |
1114 | 붕화물계 초고온 세라믹스 복합체의 제조 및 고온 산화거동에 관한 연구 = A study on the high temperature oxidation behavior of boride-based ultra-high temperature ceramic compositeslink 성영훈; Seong, Young-Hoon; et al, 한국과학기술원, 2013 |
1115 | 브레이징에 의한 세라믹 접합체에서 계면반응축과 계면강도에 관한 연구 = A study on the interfacial strength and the reation layer of brazed joints in ceramic materialslink 조현춘; Cho, Hyeon-Choon; et al, 한국과학기술원, 1992 |
1116 | 비가수 솔-젤 법에 의한 실리카-폴리머 나노 하이브리드 재료의 합성 및 특성 = Synthesis and characteristics of silica-polymer nano hybrid materials by non-hydrolytic sol-gel processlink 어영주; Eo, Young-Joo; et al, 한국과학기술원, 2005 |
1117 | 비정질 CoZr 하지층이 CoCrPt(Ta)/Ti 수직기록매체의 자성 및 미세조직 특성에 미치는 영향 = Effects of amorphous CoZr underlayer on magnetic and structural properties in CoCrPt(Ta)/Ti perpendicular recording medialink 이인선; Lee, In-Seon; et al, 한국과학기술원, 1999 |
1118 | 비정질 실리콘 카바이드 화학증착 공정의 수치모사화 및 광학적, 전기적 특성연구 = A study on the process simulation and the properties of deposited a-SiC films in chemical vapor depositionlink 박영진; Park, Young-Jin; et al, 한국과학기술원, 1990 |
1119 | 산소-아세틸렌 토치 및 DC glow discharge법에 의한 다이아몬드 성장에 관한 연구 = A study on the diamond growth by oxy-acetylene torch and DC glow discharge CVD processlink 이욱성; Lee, Wook-Seong; et al, 한국과학기술원, 1995 |
1120 | 산화-환원 ALD 증착법에 의해 형성된 Nickel 박막의 특성에 관한 연구 = A study on the nickel thin films formed by oxidation-reduction ALDlink 채정헌; Chae, Jung-Hun; et al, 한국과학기술원, 2002 |
1121 | 산화물 첨가가 FePt 박막의 규칙화와 구조적 특징에 미치는 영향 = Effects of oxide addition on the ordering and structural properties in FePt thin filmslink 변원배; Byun, Won-Bae; et al, 한국과학기술원, 2009 |
1122 | 상변화메모리 응용을 위한 $(InSb)_{2}Te_{3}$ 칼코게나이드 화합물의 상변화특성 연구 = Phase Change Characteristics of $(InSb)_{2}Te_{3}$ Chalcogenide Alloys for Application in Phase Change Memorylink 윤재진; Yun, Jae-Jin; et al, 한국과학기술원, 2011 |
1123 | 상용 및 P-doped 304L 스탠레스 강의 크립-피로 거동에 관한 연구 = A study on the creep-fatigue behavior of commercial and P-doped 304L stainless steellink 김중재; Kim, Joong-Jae; et al, 한국과학기술원, 1990 |
1124 | 상용 및 S-,P-,S-,P-doped Type 304 스텐레스 강에서의 고온입계취성 = High temperature intergranular embrittlement in commercial and S-,P-,S,P-doped type 304 stainless steelslink 홍준화; Hong, Jun-Hwa; et al, 한국과학기술원, 1986 |
1125 | 상전이 온도 이하에서 제조된 헤테로에피택셜 $PbTiO_3$ 박막의 강유전성 평가 및 분역 구조 생성에 관한 이해 = Characterization of heteroepitaxial $PbTiO_3$ thin films fabricated below curie temperature and understanding of domain structure formationlink 정원웅; Jung, Won-Woong; et al, 한국과학기술원, 2006 |
1126 | 새로운 CNT 페이스트 조성물을 이용한 전계 방출 특성의 향상 및 전계 방출 구동 중 CNT tips의 degradation 현상 규명 = Field emission enhancement by new CNT paste components and characterization of degradation in CNT tips during field emissionlink 이소라; Lee, So-Ra; et al, 한국과학기술원, 2006 |
1127 | 생체의학용 CP-Ti의 ECAE 가공공정에 관한 연구 = Equal channel angular extrusion processing of cp-ti for bio-medical applicationlink 천승환; Chon, Seung-Hwan; et al, 한국과학기술원, 2007 |
1128 | 석출경화형 Nb-A286 초내열합금에서 온도와 변형량에 따른 저주파 피로 손상기구에 관한 연구 = A study on the damage mechanism under low cycle fatigue with temperature and strain in the precipitate strengthened Nb-A286 superalloylink 노병섭; Rho, Byung-Sup; et al, 한국과학기술원, 2000 |
1129 | 세라믹스 및 박막으로 구현된 MPB 조성의 $PbYb_{1/2}Nb_{1/2}O_3-PbTiO_3$ 고용체의 상공존 안정성 및 전기적 특성 = Phase stability and electrical properties of thin film and ceramics near the morphotropic phase boundary of $(1-x)PbYb_{1/2}Nb_{1/2}O_3-(x)PbTiO_3$link 임기빈; Im, Ki-Vin; et al, 한국과학기술원, 2001 |
1130 | 소결 $UO_2$에서 이중 결정립 조직의 형성과 변천 그리고 기공 성장에 관한 연구 = The development and change of a duplex grain structure and the pore growth in sintered $UO_2$link 송근우; Song, Kun-Woo; et al, 한국과학기술원, 1993 |
1131 | 소결 CdS 막의 제조와 전기적 성질 = Preparation and electrical properties of sintered Cds layerslink 양홍근; Yang, Hong-Geun; et al, 한국과학기술원, 1985 |
1132 | 소결 및 열처리 분위기에 따른 $SrTiO_3$의 미세조직 변화 = Microstructure change of $SrTiO_3$ in various sintering and heat-treatment atmosphereslink 윤경진; Yoon, Kyung-Jin; et al, 한국과학기술원, 1991 |
1133 | 소결로 제조된 $Nd_{15}Fe_{77}B_8$ 경자성 재료의 미세 구조와 보자력 향상 기구에 관한 연구 = A study on the microstructures and coercivity enhancement in sintered $Nd_{15}Fe_{77}B_8$ hard magnetslink 피승호; Pi, Seung-Ho; et al, 한국과학기술원, 1995 |
1134 | 소결조건이 $Y{1-x}Bi_xBa_2Cu_3O_{7-y}$ 와 $Bi_{1-y}Pb_ySr_1Ca_1Cu_{1.8}O_x$ 계의 초전도 특성에 미치는 영향 = Effects of sintering conditions on superconducting properties of $Y{1-x}Bi_xBa_2Cu_3O_{7-y}$ and $Bi_{1-y}Pb_ySr_1Ca_1Cu_{1.8}O_x$ systemslink 박성; Park, Sung; et al, 한국과학기술원, 1990 |
1135 | 소결체 $Cd_{1-x}Zn_xS$ 박막의 광학적 특성 및 소결체 $Cd_{1-x}Zn_xS$/CdTe 태양전지의 특성 = Optical properties of sintered $Cd_{1-x}Zn_xS$ films and photovoltaic properties of sintered $Cd_{1-x}Zn_xS$/CdTe solar cellslink 박규찬; Park, Kyu-Charn; et al, 한국과학기술원, 1988 |
1136 | 소결체 $Cd_{1-x}Zn_xS/CdTe$ 태양전지의 광전압 특성 = Photovoltaic properties of sintered $Cd_{1-x}Zn_xS/CdTe$ solar cellslink 김형수; Kim, Hyeong-Soo; et al, 한국과학기술원, 1992 |
1137 | 소결체 CdS/CdTe 태양전지에서 전극 제작 조건이 전지의 특성에 미치는 영향 = Effects of preparation conditions of contact electrodes on the photovoltaic properties of sintered CdS/CdTe solar cellslink 김철수; Kim, Chul-Soo; et al, 한국과학기술원, 1990 |
1138 | 소결체 CdS/CdTe 태양전지의 특성에 대한 제조조건과CdS 미세구조의 영향 = Effect of preparation conditions and CdS microstructure on the photovoltaic properties of sintered CdS/CdTe solar cellslink 이재신; Lee, Jae-Shin; et al, 한국과학기술원, 1986 |
1139 | 솔-젤 금속 산화물 박막 트랜지스터의 조성 설계 및 특성 최적화 = Composition design and optimized characterization of sol-gel metal oxide thin film transistorslink 전준혁; Jeon, Jun-Hyuck; et al, 한국과학기술원, 2012 |
1140 | 솔-젤 하이브리드 재료를 이용한 플렉시블 소자용 유리섬유 강화 투명 복합체 기판 = Transparent glass-fabric reinforced composite substrate for flexible devices using sol-gel hybrid materiallink 진정호; Jin, Jung-Ho; et al, 한국과학기술원, 2011 |
1141 | 솔-젤 하이브리드 재료의 유기 박막 트랜지스터용 게이트 절연막 및 기체 차단막 응용 = Application of sol-gel hybrid materials to gate dielectrics and barrier layers in organic thin film transistorslink 최천기; Choi, Chaun-Gi; et al, 한국과학기술원, 2008 |
1142 | 솔-젤 합성된 비닐-올리고실록산 기반 실록산 하이브리드 재료의 제조 및 응용 = Fabrication and applications of Sol-Gel synthesized Vinyl-Oligosiloxane based siloxane hybrid materialslink 김준수; Kim, Joon-Soo; et al, 한국과학기술원, 2012 |
1143 | 수소를 이용한 비정질 Zr - Ni 합금에서의 구조에 관한 연구 = A study on the structure of the amorphous Zn-Ni alloys using hydrogenlink 장택희; Jang, Taek-Hee; et al, 한국과학기술원, 1992 |
1144 | 수소저장합금을 이용한 히트펌프의 작동특성 및 수소저장합금의 동적반응특성에 관한 연구 = A study on the operating characteristics of metal hydride heat pump and the dynamic reaction of hydride in the reactorlink 이수근; Lee, Soo-Geun; et al, 한국과학기술원, 1995 |
1145 | 수열합성법으로 증착한 PZT 박막의 강유전성 및 전왜 특성 연구 = Study of the ferroelectricity and electrostriction of PZT thin film fabricated by hydrothermal synthesislink 유동주; You, Dong-Joo; et al, 한국과학기술원, 2004 |
1146 | 수열합성을 이용한 페로브스카이트계 분말의 제조 = Synthesis of perovskite oxide powders under hydrothermal conditionslink 최재영; Choi, Jae-Young; et al, 한국과학기술원, 1998 |
1147 | 수직공진형 표면방출 레이저의 편광 조절에 관한 연구 = A study on the polarization control of vertical-cavity surface-emitting laserlink 박민수; Park, Min-Soo; et al, 한국과학기술원, 1999 |
1148 | 순 탄소강과 듀플렉스 스테인레스강의 동적변태와 동적재결정에 관한 연구 = Study of the dynamic transformation and recrystallization of plain carbon steel and duplex stainless steellink 김관호; Kim, Kwan-Ho; et al, 한국과학기술원, 2005 |