Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject 열처리

Showing results 1 to 21 of 21

1
11%CrMoVNb 강의 크리프 성질에 미치는 템퍼링 열처리의 영향 = Effects of tempering heat treatment on the creep properties of a 11%CrMoVNb steellink

이영수; Lee, Young-Soo; et al, 한국과학기술원, 2001

2
(A) study on the reaction properties of compression-bonded Ni/Al microfoils = Ni이 증착된 Al박막을 압축하여 만든 다층구조의 반응 특성에 관한 연구link

Kuk, Seoung Woo; 국승우; et al, 한국과학기술원, 2014

3
AISI 316 스테인리스강에서 발생하는 입계 serration에 영향을 미치는 인자 고찰 및 발생 기구 규명 = An investigation of the factors affecting the occurrence of the grain boundary serration and the grain boundary serration mechanism in AISI 316 stainless steellink

김기재; Kim, Ki-Jae; et al, 한국과학기술원, 2004

4
Atomic-level surface characterization of organic and inorganic materials = 유기 및 무기물의 원자수준 표면분석link

Park, Young-Jae; 박영재; et al, 한국과학기술원, 2013

5
$(CdC1_2+CdS)$ 분위기를 이용한 CdS 막의 열처리 효과에 관한 연구 = A study on the effect of heat treatment of CdS films in $(CdC1_2+CdS)$ atmospherelink

안진형; Ahn, Jin-Hyung; et al, 한국과학기술원, 1998

6
Co/Cu/Co/FeMn 스핀밸브의 자기저항 특성 향상 연구

이혁모; 배준수; 김홍진; 노은선; 이택동, Journal of Korean Magnetics Society, v.12, no.1, pp.24 - 29, 2002-02

7
$(Co_{0.5}Fe_{0.5})_XAg_{100-X}$ 미세입상 합금박막에서의 열처리와 두께에 따른 거대자기저항 거동 변화 = Effect of annealing and thickness on giant magnetoresistance in $(Co_{0.5}Fe_{0.5})_XAg_{100-X}$ granular thin filmslink

배종성; Bae, Jong-Sung; et al, 한국과학기술원, 1999

8
Controllable graphene doping with uniform and ultrathin polymer deposition via iCVD = 게시제를 이용하여 화학기상 증착 된 고분자 층을 이용한 그래핀 도핑에 관한 연구link

Lee, Jun Seok; 이준석; et al, 한국과학기술원, 2015

9
Cr, Mo가 코팅된 실리콘 팁과 열처리에 따른 전계방출 특성에 대한 연구 = Investigation of field emission properties of Cr, Mo coated silicon tip and their change upon annealinglink

맹인영; Maeng, In-Young; et al, 한국과학기술원, 1997

10
Cu/TiN/Ti/Si 다층막의 열처리에 관한 연구 = A study on the annealing of the Cu/TiN/Ti/Si Multilayerlink

라사균; Rha, Sa-Kyun; 박종욱; 천성순; et al, 한국과학기술원, 1997

11
Effect of homogenization heat treatment on microstructure and bond strength of high strength Au bonding wire = 고강도 Au bonding wire의 균질화 열처리에 따른 미세조직 및 접합강도 연구link

Lim, Byung-Kyu; 임병규; et al, 한국과학기술원, 2006

12
Effects of thermal annealing on the microstructure of ZnO thin films grown on Si substrates = 실리콘 기판 위에 성장된 ZnO 박막의 미세구조에 열처리의 영향link

Yuk, Jong-Min; 육종민; et al, 한국과학기술원, 2007

13
Si 기판위에 Hot filmanent CVD법으로 제조된 다이아몬드 박막의 응력 해석 = Stress analysis in diamond thin films on Si wafer deposited by hot filament chemical vapor depositionlink

차승일; Cha, Seung-Il; et al, 한국과학기술원, 1998

14
Zr-Nb 합금의 Nb 함량 및 열처리에 따른 조직변화와 고온·고압수 ($H_2O$ 및 $D_2O$)에서의 부식 및 수소흡수 거동에 관한 연구 = The study on the effect of composition and heat treatment on the microstructure and corrosion and hydrogen uptake behaviour of Zr-Nb alloys under high temperature and high pressure water($H_2O$ and $D_2O$) atmospherelink

주기남; Choo, Kee-Nam; et al, 한국과학기술원, 1995

15
구리의 화학증착기구에 관한 연구 = A study on the copper chemical vapor deposition mechanism using copper(I) hexafluoroacetylacetonate trimethylvinylsilanelink

이원준; Lee, Won-Jun; et al, 한국과학기술원, 1996

16
상온에서 증착한 AZO 박막의 후열처리효과가 전기적, 구조적 특성에 미치는 영향 = Post-annealing effects on the electrical and structural properties of AZO thin films deposited at room temperaturelink

이성환; Lee, Sung-hwan; et al, 한국과학기술원, 2008

17
스퍼터링 방법으로 증착된 Al-doped ZnO 박막의 투과전자현미경 분석 = A transmission electron microscopy characterization on the microstructure of Al-doped ZnO films deposited by sputtering methodlink

한준희; Han, Jun-Hee; et al, 한국과학기술원, 2009

18
열처리를 통한 CIGS 박막의 표면 개선과 CIGS 태양전지 특성에 미치는 영향 = Surface modification of CIGS film by annealing and its effect on the performance of CIGS solar cellslink

신영민; Shin, Yeong-Min; et al, 한국과학기술원, 2014

19
열처리와 흡수층 위에 증착된 In이 $CBD-In_2S_3$ 버퍼층을 적용한 CIGS 태양전지에 미치는 영향에 관한 연구 = Annealing and Indium interlayer effects on the $CBD-In_2S_3$/CIGS solar cellslink

김희섭; Kim, Hee-Seop; et al, 한국과학기술원, 2011

20
열처리와 흡수층 위에 증착된 In이 $CBD-In_2S_3$ 버퍼층을 적용한 CIGS 태양전지에 미치는 영향에 관한 연구 = Annealing and Indium interlayer effects on the $CBD-In_2S_3$/CIGS solar cellslink

김희섭; Kim, Hee-Seop; et al, 한국과학기술원, 2011

21
초내식성 이상 스테인레스강의 상분율에 미치는 열처리 방법과 합금원소 (Si, Mn) 첨가의 영향 = Effects of heat treatment method and alloying elements (Si, Mn) on the phase fraction in super duplex stainless steelslink

정상원; Jeong, Sang-Won; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0