841 | 초소형 정적연소실내에서의 화염 전파의 측정과 해석 = Measurement and analysis of flame propagation in constant volume micro combustorlink 나한비; Na, Han-Bee; et al, 한국과학기술원, 2003 |
842 | 초음속 복합재료 날개에 대한 플러터 해석 = Flutter analysis of composite wing in supersonic flowlink 이동환; Lee, Dong-Hwan; et al, 한국과학기술원, 1992 |
843 | 초음속 비행체의 플러터 해석 = Flutter analysis of a supersonic flight vehiclelink 김태한; Kim, Tae-Han; et al, 한국과학기술원, 1994 |
844 | 초음속 연소에서의 2차원 2단 혼합층에 관한 수치해석 = Numerical study on the 2D double shear layer in supersonic combustionlink 김동민; Kim, Dong-Min; et al, 한국과학기술원, 2004 |
845 | 초음속 이중 압축램프 앞전 곡률에 관한 실험적 연구 = Bluntness effect of double compression ramp in supersonic flowslink 김익현; Kim, Ik Hyun; et al, 한국과학기술원, 2016 |
846 | 초음파 탐상법을 이용한 두꺼운 직조 S2-글라스/폴리에스터 복합재의 결함 검출 및 강도 저하에 관한 연구 = Damage detection of thick S2-glass/polyester woven laminates using ultrasonic test and mechanical property degradationlink 강희엽; Kang, Hee-Youb; et al, 한국과학기술원, 2001 |
847 | 초음파 탐상법을 이용한 복합적층판의 저속충격손상 평가 = The evaluation of low-velocity impact damage of composite laminates using ultrasonic textlink 권태훈; Kwon, Tae-Hoon; et al, 한국과학기술원, 1998 |
848 | 초음파전파영상화 시스템을 이용한 복합재 격자 구조체 비파괴평가 기술 연구 = Study of non-destructive evaluation technology of composite lattice structure using ultrasonic propagation imaging systemlink 박재윤; 이정률; et al, 한국과학기술원, 2017 |
849 | 촉매벽 효과를 고려한 무딘 물체 주위의 열 화학적 비평형 유동에 대한 수치적 연구 = Numerical simultaion of thermochemical non-equilibrium flow around blunt bodies considering catalytic wall effectslink 김재원; Kim, Jae-Won; et al, 한국과학기술원, 2012 |
850 | 최대공산법을 이용한 공력계수 식별 = Maximum likelihood identification of aerodynamic coefficients from flight datalink 위관식; Wie, Kwan-sik; et al, 한국과학기술원, 1992 |
851 | 최적가중함수를 이용한 압축성 유동의 Upwind 유한요소해석 = Upwind finite element methods using optimal weighting functions for solving compressible euler equationslink 지선구; Ji, Seon-Goo; et al, 한국과학기술원, 1993 |
852 | 최적제어기법을 이용한 우주시스템의 동적 기술포트폴리오 최적화 = Dynamic technology portfolio selection of space system using optimal control theorylink 홍슬기; Hong, Seulki; et al, 한국과학기술원, 2016 |
853 | 최적화된 집적 유한 차분 수치기법을 위한 예조건화와 난류모델에 대한 연구 = A study on preconditioning matrix and turbulent model for optimized compact schemelink 허대녕; Heo, Dae-Nyoung; et al, 한국과학기술원, 1999 |
854 | 최적화된 집적 유한 차분 수치기법을 이용한 초음속 제트의 Screech Tone 해석 = An analysis of screech tone noise from supersonic jet using optimized compact schemelink 이인철; Lee, In-Cheol; et al, 한국과학기술원, 2003 |
855 | 최적화된 집적 유한 차분법을 이용한 항공기 팬 소음의 근거리 방사 연구 = A numerical study on the sound radiation from aircraft engine inlet using optimized compact schemelink 심인보; Shim, In-Bo; et al, 한국과학기술원, 1998 |
856 | 최적화된 집적 유한차분법을 위한 내재적 시간전진 기법의 특성 연구 = A study on characteristics of implicit optimized compact schemelink 박노성; Park, No-Sung; et al, 한국과학기술원, 1999 |
857 | 최적화된 집적유한차분을 이용한 고차의 정확도와 고해상도를 갖는 유한 체적법의 연구 = A study on optimized compact finite volume schemelink 김용제; Kim, Yong-Jea; et al, 한국과학기술원, 2001 |
858 | 추진제 농도의 과산화수소 증류 조건 확립 및 성능 평가 = Distillation of rocket grade hydrogen peroxide and performance evaluation of distilled hydrogen peroxidelink 정승미; Chung, Seung-Mi; et al, 한국과학기술원, 2010 |
859 | 축대칭 비행체의 전방동체부를 흐르는 천음속 유동 = Full potential transonic flow past forebodies of axisymmetric flight vehicleslink 김동환; Kim, Dong-Huan; et al, 한국과학기술원, 1982 |
860 | 축대칭 휘슬의 소음발생에 관한 수치적 시뮬레이션 = Numerical simulation of the noise generation in an axisymmetric whistlelink 한승진; Han, Seung-Jin; et al, 한국과학기술원, 2001 |
861 | 축소모형으로 제작된 복합재 Wing box 의 구조시험 및 해석 = Experimental and analytical study on downscaled composite wing boxlink 조재헌; Cho, Jae-Heon; et al, 한국과학기술원, 1997 |
862 | 충격 전파 실험을 위한 파이로 충격 모사장비 개발 = Development of pyroshock simulator for shock propagation testlink 이소정; 한재흥; et al, 한국과학기술원, 2018 |
863 | 충격파 터널에서의 가속도계 기반 시스템을 이용한 항력 측정 연구 = Aerodynamic drag measurement using accelerometer-based system in a shock tunnellink 장병국; 박기수; et al, 한국과학기술원, 2021 |
864 | 충격파 터널에서의 다중 온도 기반 유동 해석 = Multi-temperature based flow analysis of a shock tunnellink 이상훈; 박기수; et al, 한국과학기술원, 2017 |
865 | 충격파 터널을 이용한 에틸렌 연료 모델 스크램제트의 연소 특성 연구 = Combustion characteristics of ethylene-fueled model scramjet in a shock tunnellink 김근영; 박기수; et al, 한국과학기술원, 2019 |
866 | 충격파관에서의 극초음속 정체 유동 특성 연구 = Study of hypersonic stagnation flow in a shock tubelink 심한슬; 박기수; et al, 한국과학기술원, 2018 |
867 | 충격파에 의해 폭발물에 일어나는 화학반응 진행모델 = Modeling of reaction buildup process in shocked porous explosiveslink 손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1985 |
868 | 측면 공기 유입이 있는 액적 분무 연소기에 관한 수치적 해석 = A numerical study of an axisymmetric side-inlet spary combustorlink 박병용; Park, Byeung-Yong; et al, 한국과학기술원, 1992 |
869 | 측면 제트 유동에서 난류 모델 개선에 관한 수치적 연구 = Numerical study on improving turbulence Model in the supersonic side-jet injection flowlink 최미진; Choi, Mi-Jin; et al, 한국과학기술원, 2004 |
870 | 층간 전단 하중을 받는 복합적 층판의 균열에 대한 간헐적인 층간결합의 영향 = Effects of intermittent interlaminar bonding on the cracked composite laminate under interlaminar shear loadinglink 유동희; Yoo, Dong-Hee; et al, 한국과학기술원, 1984 |
871 | 층류 박리 기포에 관한 수치적 연구 = A numerical study of laminar separation bubblelink 조인현; Cho, In-Hyun; et al, 한국과학기술원, 1988 |
872 | 층별 변위장 이론을 이용한 복합재료 원뿔형 쉘 구조물의 열 좌굴 후 거동 해석 = Thermal postbuckling characteristics of composite conical shell structures using layerwise theorylink 우지혜; Woo, Ji-Hye; et al, 한국과학기술원, 2008 |
873 | 층상형 구조전지를 위한 겔 고분자 전해질 기반 일체형 전극 구조 = Integrated electrode structure using gel polymer electrolyte for laminated structural batterylink 노정언; Noh, Jung-Eon; et al, 한국과학기술원, 2023 |
874 | 친환경 단일추진제 촉매분해 모델링을 이용한 추력기 촉매대 설계 최적화 = Design optimization of green monopropellant thruster catalyst beds using catalytic decomposition modelinglink 정상우; 권세진; et al, 한국과학기술원, 2017 |
875 | 컨벡스 최적화 기법을 이용한 재사용 발사체의 재진입 및 착륙 유도 = Re-entry and landing guidance of reusable launch vehicle using convex optimizationlink 황준섭; 안재명; et al, 한국과학기술원, 2021 |
876 | 켤레구배법을 이용한 2차원 비직교 형상에서의 역복사 해석 = Inverse radiation analysis for a two-dimensional irregular geometry using conjugate gradient methodlink 이경주; Yi, Kyung-Joo; et al, 한국과학기술원, 2008 |
877 | 코너에서의 난류 유동에 관한 수치 계산 = Computation of turbulent flows in cornerslink 신승주; Shin, Seung-Joo; 박승욱; 이덕주; et al, 한국과학기술원, 1989 |
878 | 쿼드로터 볼 저글링 기법 연구 = Trajectory design for ball juggling with quadrotorslink 한진수; 최한림; et al, 한국과학기술원, 2017 |
879 | 쿼터니언을 이용한 인공위성 자세제어기법 연구 = Satellite attitude control using quaternion parameterslink 윤형주; Yoon, Hyung-Joo; et al, 한국과학기술원, 1996 |
880 | 큰 가로세로비를 갖는 유연 날개의 전산유체-전산구조 연계 해석 및 최적설계 연구 = A coupled CFD-CSD analysis and design optimization of high-aspect-ratio flexible wingslink 정용수; Jung, Yong-Su; et al, 한국과학기술원, 2014 |
881 | 탄소 입자·기체 혼합물의 충격파에 의한 점화 현상 = Interaction of a moving shock wave with carbon particle-laden oxygen gaslink 박준성; Park, Jun-Sung; et al, 한국과학기술원, 2001 |
882 | 탄소/탄소 브레이크 디스크의 기계적 특성에 관한 연구 = Mechanical characteristics of carbon/carbon composite for aircraft brake disklink 유재석; Yoo, Jae-Seok; et al, 한국과학기술원, 1997 |
883 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
884 | 탄소나노입자가 첨가된 케블라 섬유강화 복합재료를 이용한 RAS 설계 및 제작 = Design and fabrication of RAS with carbon nanoparticles added kevlar fiber reinforced compositelink 신재환; Shin, Jae-Hwan; et al, 한국과학기술원, 2011 |
885 | 탄소나노튜브 복합 섬유 센서를 이용한 유리섬유 복합재 구조에서의 변형률 및 층간분리 검출에 관한 연구 = CNT/Polymer Composite fiber sensor-based strain and delamination detection on GFRP composite structurelink 김경환; 이정률; et al, 한국과학기술원, 2019 |
886 | 탄소나노튜브가 분산된 평직 탄소 섬유 / 에폭시 복합재료의 감쇠특성 = Damping characteristics of carbon nanotubes dispersed woven carbon fiber / epoxy compositelink 김희철; Kim, Hee-Chul; et al, 한국과학기술원, 2011 |
887 | 탄소나노튜브가 분산된 평직 탄소 섬유 / 에폭시 복합재료의 감쇠특성 = Damping characteristics of carbon nanotubes dispersed woven carbon fiber / epoxy compositelink 김희철; Kim, Hee-Chul; et al, 한국과학기술원, 2011 |
888 | 탄소나노튜브를 첨가한 나노 복합재료의 기계적/물리적 특성 변화 연구 = Mechanical and physical properties changes of nanocomposites due to addition of carbon nanotubeslink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2003 |
889 | 탄소섬유 강화 플라스틱 Angle-ply laminate 에서의 파괴 특성 = Fracture behavior of carbon fiber reinforced plastics in angle-ply laminateslink 도영대; Do, Yeong-Dai; et al, 한국과학기술원, 1981 |
890 | 탄소섬유 및 고체전해질을 이용한 구조전지의 전기적 특성과 활용가능성 = Electrical characteristics and applicability of structure-batteries using carbon fabric and solid electrolytelink 박미영; Park, Mi-Young; et al, 한국과학기술원, 2012 |
891 | 탄소입자와 기체의 혼합물에 있어서의 이상폭발현상구조에 관한 수치적 연구 = The structure of two-phase detonation in carbon-particles laden gaseslink 승성표; Seung, Seong-Pyo; et al, 한국과학기술원, 1988 |
892 | 터보 펌프 터빈 구동시 비정상 천이 열유동 해석 및 구조 해석 = Unsteady aero-thermal and structural analysis of turbopump turbine at startuplink 서영진; Seo, Young-Jin; et al, 한국과학기술원, 2004 |
893 | 터빈 구동을 위한 가스발생기 개발 및 평가 = Development and evaluation of hydrogen peroxide gas generator for turbine drivelink 박대종; Park, Dae-Jong; et al, 한국과학기술원, 2010 |
894 | 테이프 스프링을 이용한 큐브위성용 미터급 전개형 구조물 개발 = Development of a meter-scale deployable structure for CubeSat using tape springlink 정바울; 한재흥; et al, 한국과학기술원, 2021 |
895 | 테트라글라임 연료를 이용한 ADN 기반 단일추진제 개발 및 평가 = Development and evaluation of ADN based mono-propellant using tetraglyme fuellink 김주원; 권세진; et al, 한국과학기술원, 2019 |
896 | 통합-세부 변분 모델을 이용한 복합적층판의 층간응력 해석 및 층간분리에 대한 연구 = Interlaminar stress and delamination analysis of laminated composites by a global-local variational modellink 김동민; Kim, Dong-Min; 홍창선; 곽병만; et al, 한국과학기술원, 1986 |
897 | 특이섭동법을 이용한 미사일 비행궤적 최적화 = Missile trajectory optimization using the singular perturbation techniquelink 이호일; Lee, Ho-Il; et al, 한국과학기술원, 1994 |
898 | 특이점 분포를 이용한 익형 해석의 수치적 계산에 대한 연구 = Establishment of a numerical computational procedure for determination of aerodynamic characteristics of an airfoil based upon singularity distribution methodlink 조창열; Cho, Chang-Youl; et al, 한국과학기술원, 1981 |
899 | 틸트로터 항공기의 동역학적 모델링에 대한 연구 = A study on dynamic modeling of tilt-rotor aircraftlink 구훤준; Koo, Hweon-Jun; et al, 한국과학기술원, 1992 |
900 | 파라핀-왁스 기반 하이브리드로켓 연소실의 실험 및 수치해석 연구 = Experimental and numerical study on hybrid rocket combustor using paraffin-waxlink 박현춘; Park, Hyun-Chun; et al, 한국과학기술원, 2009 |