683 | Machine learning-based constitutive model for metal plasticity = 금속 소성학을 위한 머신러닝 기반 구성모델link Piemaan, Fazily; 피에만 파질리; et al, 한국과학기술원, 2024 |
684 | Magnetic field modeling and force ripple minimization in slotted moving coil type linear motor = 슬롯 있는 가동코일형 선형모터에서 자속밀도의 모델링과 추력리플 최소화를 위한 연구link Chung, Myung-Jin; 정명진; et al, 한국과학기술원, 2002 |
685 | Magneto-rheological fluid based squeeze film damper for semi-active unbalance response control of rotor = 회전체의 불균형 응답 제어를 위한 자기유변유체를 이용한 스퀴즈 필름 댐퍼link Kim, Keun-Joo; 김근주; et al, 한국과학기술원, 2005 |
686 | Maritime safety analysis framework considering human collaborative relation network = 인적 협업 네트워크 특성을 고려한 해양 시스템의 안전 분석 프레임워크 연구link Lee, Joohee; Chang, Daejun; 장대준; Chung, Hyun; et al, 한국과학기술원, 2018 |
687 | Material parameter determination using terahertz time-domain signal analysis = 테라헤르츠 시간 영역 신호 분석에 의한 물성 측정 연구link Choi, Jindoo; 최진두; et al, 한국과학기술원, 2016 |
688 | Measurement and compensation of ankle stiffness using sensor-integrated pneumatic ankle foot orthosis = 센서 통합형 공압 단하지 보조기를 이용한 발목 강성 측정 및 보상link Gu, Gwang Min; 구광민; et al, 한국과학기술원, 2015 |
689 | Mechanical behavior of additively manufactured fine equiaxed-grained 316L stainless steel = 적층제조된 미세한 등축립을 갖는 316L 스테인리스 강의 기계적 거동link Bae, Jong-Soo; 배종수; et al, 한국과학기술원, 2024 |
690 | Mechanical perspectives on fibroblasts in wound healing and tumorigenesis = 상처치유과정과 종양형성에서 섬유아세포의 세포역학적 특성link Kang, Minwoo; Shin, Jennifer H.; et al, 한국과학기술원, 2023 |
691 | Mechanical properties and interfacial reliability of organic electronic materials = 유기전자재료의 기계적 특성 및 계면 신뢰성link Lee, Inhwa; 이인화; et al, 한국과학기술원, 2017 |
692 | Mechanical properties and reliability of advanced energy/electronic materials = 차세대 에너지/전자 재료의 기계적 물성 및 신뢰성 평가link Kim, Jae-Han; 김재한; et al, 한국과학기술원, 2017 |
693 | Mechanical properties, stretchability and fatigue behavior of metal thin films = 금속 박막의 기계적 물성, 신축성 및 피로 거동link Sim, Gi-Dong; 심기동; et al, 한국과학기술원, 2012 |
694 | Mechanical regulation of collective behavior and interfacial dynamics of cell clusters = 계면 형성과 세포 군집 거동 간 기계적 상호작용의 규명link Jeong, Hyuntae; Shin, Jennifer Hyunjong; et al, 한국과학기술원, 2023 |
695 | Mechanical sensing of skeletal muscle contraction and fatigue for physical human-robot interaction = 물리적 인간 로봇 상호 작용을 위한 골격근 수축과 피로의 기계적 측정link Han, Hyo-Nyoung; 한효녕; et al, 한국과학기술원, 2012 |
696 | Mechanical stresses in cellular collective migration = 세포 군집 운동 속 물리적 힘의 역할 규명link Cho, Youngbin; Shin, Jennifer H.; et al, 한국과학기술원, 2020 |
697 | Mechanically/thermally induced shape-morphing for atypical micro/nanostructures = 비정형 마이크로/나노구조체 구현을 위한 기계적/열적 형상 변형 방법link Ahn, Junseong; Park, Inkyu; et al, 한국과학기술원, 2023 |
698 | MEMS-based portable direct methanol fuel cells with platinum sputtered microcolumn electrodes using limited fuel sources = 백금 촉매가 증착된 미소돌기 전극을 이용한 유한연료형 휴대용 마이크로 직접메탄올연료전지에 관한 연구link Seo, Young-Ho; 서영호; et al, 한국과학기술원, 2003 |
699 | Mesh generation and adaptive refinement of all-hexahedral elements for three-dimensional finite element analysis = 3차원 유한요소 해석을 위한 육면체 요소의 격자 생성 및 세분화에 관한 연구link Park, Chul-Hyun; 박철현; et al, 한국과학기술원, 2005 |
700 | Method of generating 3 dimensional sounds for elevation perception = 고도감 인지를 위한 3차원 입체 음향 기술 재생법link Jo, Hyun; 조현; Park, Youn-Sik; 박윤식; et al, 한국과학기술원, 2012 |
701 | Methodology for heat integration and reinforcement learning-based energy management of liquid hydrogen-powered hybrid ship propulsion system = 액체수소 하이브리드 선박 추진 시스템의 열 통합 및 강화학습 기반 에너지 관리 방법론link Jung, Wongwan; 정원관; et al, 한국과학기술원, 2024 |
702 | Methods for detection and resolution of self-intersection in simulation of lattice-based deformation = 격자를 이용한 변형 시뮬레이션에서 자체교차를 검사 및 방지하기 위한 방법link Ahn, Woo-Jin; 안우진; et al, 한국과학기술원, 2010 |
703 | Micro-biosensor integrated medical needle towards teal-time tissue analysis during medical procedure = 수술 및 시술 중 실시간 조직 분석을 위한 마이크로 바이오센서가 집적된 의료용 바늘의 개발link Park, Jaeho; Park, Inkyu; et al, 한국과학기술원, 2019 |
704 | Micromechanics-based homogenization of the effective physical properties of reinforced composites = 미시역학 기반 균질화법을 이용한 복합재의 유효 물성치 예측연구link Lee, Sangryun; Ryu, Seunghwa; et al, 한국과학기술원, 2020 |
705 | Microstructured dielectric elastomer-based flexible tactile display resistant to large contact force = 가압 접촉에 강인한 미세구조 유전성 탄성체 기반의 유연촉감디스플레이link Pyo, Dongbum; Kwon, Dong-Soo; et al, 한국과학기술원, 2018 |
706 | Microwave-assisted plasma ignition을 이용한 가솔린 엔진의 성능 및 배기특성 향상 = Performance and emission improvement by micorwave-assisted plasma ignition in a direct-injection gasoline enginelink 황준식; Hwang, Joonsik; et al, 한국과학기술원, 2017 |
707 | Miniaturized confocal imaging system for large-volume high-speed 3-D measurement = 대용적 3차원 형상의 고속 측정이 가능한 소형 공초점 이미징 시스템link Jeong, Hyeong Jun; Gweon, Dae-Gab; et al, 한국과학기술원, 2016 |
708 | MISO 모형을 이용한 소음 / 진동원 규명법과 우선순위 결정에 관한 연구 = Source identification using MISO model and determination of the priority among correlated inputslink 박정석; Park, Jung-Seok; et al, 한국과학기술원, 1992 |
709 | MLS(Moving Least Square)-based finite elements and their applications = 이동최소제곱법기반 유한요소 및 그의 응용link Lim, Jae-Hyuk; 임재혁; et al, 한국과학기술원, 2006 |
710 | Modal analysis of asymmetric rotor with anisotropic stator using modulated coordinates = 변조좌표계를 활용한 비대칭/비등방 회전체의 모드해석기법link Suh, Jeong-Hwan; 서정환; et al, 한국과학기술원, 2004 |
711 | Modal analysis of periodically time-varying rotor systems using floquet theory and modulated coordinate transformation : applications to crack detection and modal balancing = 플로케 이론 및 변조 좌표계를 이용한 주기적 시변 회전체의 모드 해석과 균열 탐지 및 모드 밸런싱에의 적용link Han, Dong-Ju; 한동주; et al, 한국과학기술원, 2006 |
712 | Model analysis of multi-input/multi-output systemby vector ARMAX time series modeling = 벡터 ARMAX 시계열 모델링에 의한 다입력/다출력계의 모우드해석link Park, Byeong-Ho; 박병호; et al, 한국과학기술원, 1989 |
713 | Model based feed-forward control of electromagnetic type active control engine mount system = 전자석 구동형 능동 엔진 마운트의 모델 기반 제어link Lee, Bo-Ha; 이보하; et al, 한국과학기술원, 2008 |
714 | Model predictive control of an all-wheel drive system considering vehicle dynamics change by clutch engagement state = 클러치 체결 상태에 따른 차량 동역학 변화를 고려한 사륜구동 시스템의 모델 예측 기반 제어link Jung, Hojin; Choi, Seibum; et al, 한국과학기술원, 2019 |
715 | Modeling and control of nonlinear systems with multilayer neural network and its Jacobian = 다층 신경회로망의 자코비안을 이용한 비선형 시스템의 모델링과 제어에 관한 연구link Lee, Jeong-Woo; 이정우; et al, 한국과학기술원, 1997 |
716 | Modeling and simulation of deformable objects using iterative updates of local positions = 국부 위치 해의 반복 갱신을 이용한 변형체 모델링과 시뮬레이션link Han, Hyehyun; Lee, Doo Yong; et al, 한국과학기술원, 2020 |
717 | Modeling and vibration analysis of misaligned rotor-ball bearing systems = 축어긋남이 있는 회전체-볼베어링계의 모형화와 진동해석link Lee, Young-Seob; 이영섭; et al, 한국과학기술원, 1998 |
718 | Modeling approach to packed bed process with solid particle reactions = 고체 입자 반응을 포함한 고정층 모델링 : 철광석 펠릿 소성 공정link Ahn, Hyungjun; 안형준; et al, 한국과학기술원, 2017 |
719 | Modeling of dual-chamber pneumatic spring and application to transmissibility design of vibration isolation table = 이중챔버형 공압스프링의 모형화 및 제진대 전달률 설계에의 응용link Lee, Jeung-Hoon; 이정훈; et al, 한국과학기술원, 2007 |
720 | Modeling of helically stranded cables using multiple beam finite elements and its application to cable design = 다중 보 유한요소를 이용한 케이블의 모델링 방법 및 이를 이용한 케이블 설계link Kim, Sung Yun; 김성윤; et al, 한국과학기술원, 2017 |
721 | Modeling, customization, and interpolation of head-related impulse responses based on principal components analysis = 주성분 분석법을 이용한 머리전달함수의 모형화, 맞춤 및 보간법link Hwang, Sung-Mok; 황성목; et al, 한국과학기술원, 2009 |
722 | Modelling and experimental investigation of icevaning control for arctic offshore vessels = 극지 해양구조물의 동적위치유지 제어를 위한 모델링 및 실험적 연구link Kim, Young-Shik; Kim, Jinwhan; et al, 한국과학기술원, 2018 |
723 | Motion intention recognition from multi-channel surface electromyography through prediction of major muscle activation = 다채널 표면 근전도 활용 주근육 활성화 예측을 통한 운동 의도 인식link Kyeong, Seulki; Kim, Jung; et al, 한국과학기술원, 2022 |
724 | Motion planning for mobile manipulators = 이동 매니퓰레이터를 위한 운동계획link Lee, Jae-Kyung; 이재경; et al, 한국과학기술원, 1996 |
725 | Motion planning of bimanual robotic assembly = 양팔을 사용하는 조립 작업을 위한 로봇의 운동 계획link Hwang, Myun-Joong; 황면중; et al, 한국과학기술원, 2007 |
726 | Motion segmentation for inertial measurement unit applications = 관성측정장치를 활용한 동작구간탐지link Lim, Jong Gwan; 임종관; et al, 한국과학기술원, 2016 |
727 | MR브레이크와 전자유압식 동력전달장치를 이용한 새로운 하이브리드 햅틱 구동 시스템 = (A) novel hybrid haptic actuation system with electro-hydraulic force transmission using a MR brakelink 박예석; 김수현; et al, 한국과학기술원, 2018 |
728 | Multi-degree-of-freedom miniaturized linear actuator based on stick and slip of friction = 스틱-슬립 마찰 현상에 기초한 다자유도 소형 선형 구동기에 관한 연구link Lee, Jong-Hyun; 이종현; et al, 한국과학기술원, 2012 |
729 | Multi-dimensional analysis of head-related transfer function based on tensor-SVD = 텐서 특이값 분해를 이용한 머리전달함수의 다차원적 분석link Son, Daehyuk; Park, Youngjin; et al, 한국과학기술원, 2018 |
730 | Multi-length scale thermo-mechanical behavior of ionomer for proton exchange membrane fuel cell = 고분자 전해질 연료전지의 아이오노머의 두께에 따른 열기계적 거동link Jang, Kyung-Lim; Kim, Taek-Soo; et al, 한국과학기술원, 2020 |
731 | Multi-modal optical microscope with a magnetic manipulator for mechanical and flow characteristic analysis of flat soft thin films = 편평한 연성 박막의 기계적 특성 및 흐름 분석을 위한 마그네틱 매니플레이터가 장착된 복합 광학 현미경link Kim, Hyun-jun; Gweon, Dae-Gab; et al, 한국과학기술원, 2016 |
732 | Multi-point scanning dual-detection confocal microscopy for fast surface profiling = 고속 3차원 형상 측정을 위한 다중 점주사 이중 검출 공초점 현미경link Lee, Dong-Ryoung; Gweon, Dae-Gab; et al, 한국과학기술원, 2017 |
733 | Multi-Resolution meshless method for real-time cutting simulation of deformable object = 변형체의 실시간 절개 시뮬레이션을 위한 다해상도 무요소법link Jung, Hoe-Ryong; 정회룡; et al, 한국과학기술원, 2012 |
734 | Multifunctional composites for energy storage and conversion based on carbon fabrics = 에너지 저장 및 변환이 가능한 탄소직물기반 다기능성 복합재에 관한 연구link Bae, Seok-Hu; Oh, Il-Kwon; et al, 한국과학기술원, 2018 |
735 | Multifunctional optical coherence tomography: System development and application to the studies of functional hyperemia and cerebrovascular disease = 다기능 OCT: 시스템 개발과 뇌 기능성 충혈 및 뇌혈관 질환 연구에서의 응용link Shin, Paul; Oh, Wang-Yuhl; et al, 한국과학기술원, 2020 |
736 | Multigrid finite difference computation of natural convection past sharp-edged horizontal cylinders = 수평직각 실린더에 관한 자연대류의 다중격자 유한차분계산link Choi, Chul-Jin; 최철진; et al, 한국과학기술원, 1987 |
737 | Multimodal endo-microscope using fiber-optic, raster scanning method = 광섬유 래스터 스캐닝 방식을 이용한 다중모드 내시현미경link Do, Dukho; 도덕호; et al, 한국과학기술원, 2015 |
738 | Multiphysics analysis of a linear control solenoid valve = 비례제어 솔레노이드 밸브의 다중물리 해석에 대한 연구link Lee, Gee-Soo; 이기수; et al, 한국과학기술원, 2013 |
739 | Multirate output-estimation and adjusting output-limiter for real-time haptic rendering = 실시간 햅틱 렌더링을 위한 다중율 출력 추정법 및 순응 출력 제한기link Lee, Kyung-No; 이경노; et al, 한국과학기술원, 2007 |
740 | Nano-scale surface modification of polymer with carbon particles and microwave = 탄소 입자와 마이크로웨이브를 이용한 고분자 재료의 나노 스케일 표면 처리link Kim, Bu-Gi; 김부기; et al, 한국과학기술원, 2011 |
741 | Nano-to-macroscopically architectured shape memory actuators for wearable human-interactive robotics = 착용형 인간 상호작용 로보틱스를 위한 형상 기억 구동기의 나노-매크로스코픽 아키텍처 연구link Oh, Saewoong; 오세웅; et al, 한국과학기술원, 2024 |
742 | Nanomechanical antenna using ITO-coated HAR nanowire array = ITO 코팅된 고종횡비 나노선 어레이를 이용한 나노기계안테나에 대한 연구link Lee, Chang-Hwa; 이창화; et al, 한국과학기술원, 2011 |