1983 | 마그네틱 베어링의 강성에 관한 연구 = A study on the stiffness of magnetic bearinglink 정왕수; Jeong, Wang-Su; et al, 한국과학기술원, 1992 |
1984 | 마디선의 최적화와 바이올린 상판에의 적용 = Nodal line optimization and application to violin top platelink 김인겸; Kim In-Kyum; et al, 한국과학기술원, 2008 |
1985 | 마모된 저널베어링의 정특성에 관한 수치해석 = Numerical analysis of journal bearings with worn zone : static characteristicslink 손길호; Sohn, Gil-Ho; et al, 한국과학기술원, 2006 |
1986 | 마스터/슬레이브 복합형 고관절 전치환 수술로봇의 제어 = Control of a master/slave combined surgical robot for total hip arthroplastylink 허관회; Huh, Kwan-Hoe; et al, 한국과학기술원, 2001 |
1987 | 마이크로 구조물이 설치된 표면에 충돌하는 액적의 퍼짐 거동에 관한 실험적 연구 = An experimental study on spreading behavior of impinging liquid drop on micro-structured surfaceslink 장규민; Jang, Gyu Min; et al, 한국과학기술원, 2015 |
1988 | 마이크로 이상 유체 혼합을 위한 마이크로 기포 생성 = Microbubbles generation for two-phase flow micromixinglink 염수진; Yeom, Su-Jin; et al, 한국과학기술원, 2007 |
1989 | 마이크로 채널에서 두 유체 혼합 = Two-fluid mixing in a microchannellink 김병재; Kim, Byoung-Jae; et al, 한국과학기술원, 2003 |
1990 | 마이크로 컴퓨터를 이용한 진동면 모우드형상의 자동 시각화에 관한 연구 = On-line visualization of mode shapes of vibrating surfaces using microcomputerlink 김규태; Kim, Gyu-Tae; et al, 한국과학기술원, 1985 |
1991 | 마이크로 컴퓨터를 이용한 플리스틱 유압성형사출기의 자동제어 = Microcomputer application to the control of a hydraulic plastic injection molding machinelink 김종원; Kim, Jong-Won; 이종오; 홍성원; et al, 한국과학기술원, 1980 |
1992 | 마이크로 컴퓨터에 의한 사출 성형의 공정제어 = Microcomputer aided process control of injection moldinglink 임채영; Lim, Chai-Young; et al, 한국과학기술원, 1982 |
1993 | 마이크로 프로세서를 이용한 전자석 감쇄기의 제작 = Design and manufacture of a micro-processor aided electro-magnetic servo damperlink 이기영; Lee, Ki-Young; et al, 한국과학기술원, 1982 |
1994 | 마이크로-컴퓨터를 이용한 기존 밀링 기계의 수치제어화 = Retrofitting of the conventional milling M/C to an NC milling M/C using the micro-computerlink 김태국; Kim, Tae-Kuk; et al, 한국과학기술원, 1979 |
1995 | 마이크로모터 기반 소화관용 OCT 프로브 제작 및 평가 = Fabrication and evaluation of a micromotor-based gastrointestinal OCT probelink 정충호; Chung, Choong Ho; et al, 한국과학기술원, 2016 |
1996 | 마이크로미러의 표면형상오차가 TMA 프로젝터의 광학계에 미치는 영향 = Effects of form errors of the surface of a micromirror on the optical system of the TMA projectorlink 조영식; Jo, Young-Shik; et al, 한국과학기술원, 2000 |
1997 | 마이크로웨이브를 이용한 단열재용 페놀폼의 개발 = Development of microwave foaming method for phenolic insulation foamslink 김부기; Kim, Bu-Gi; et al, 한국과학기술원, 2008 |
1998 | 마이크로웨이브와 갭 센서를 이용한 가솔린 기관의 동적 상사점 측정에 관한 연구 = An experimental study on measurement of dynamic TDC in a SI engine using microwave and gap sensorlink 김기성; Kim, Ki-Sung; et al, 한국과학기술원, 1989 |
1999 | 마이크로콤퓨터를 응용한 온라인 측정 시스템 = Microcomputer-aided on-line measurement systemlink 이정운; Lee, Jeong-Woon; et al, 한국과학기술원, 1981 |
2000 | 마이크로폰 어레이를 이용한 총구 위치 탐지 개선 방법 = Improvement of muzzle localization using microphone arraylink 정승우; Jung, Seong-Woo; et al, 한국과학기술원, 2014 |
2001 | 마이크로프로세서를 이용한 절단 시스템의 자동화 = Automation of cutting system using microprocessorlink 은종욱; Eun, Jong-Uk; et al, 한국과학기술원, 1982 |
2002 | 마찰 및 마모에 대한 이온질화의 영향 = The effects of ion-nitriding on friction and wearlink 오희영; Oh, Hie-Young; et al, 한국과학기술원, 1984 |
2003 | 마찰상태측정을 위한 ring 압축 시험의 실험적 연구 = An experimental study on ring compression test for friction measurementlink 한영호; Hahn, Young-Ho; et al, 한국과학기술원, 1977 |
2004 | 마찰특성과 Stick-slip에 기인하는 소음과의 상관관계에 대한 연구 = A study on correlation between noise caused by stick-slip and friction characteristicslink 박동일; Park, Dong-Il; et al, 한국과학기술원, 2005 |
2005 | 마칭 큐브 알고리즘 기반 다면체 유한요소 격자망 구성 = Construction of polyhedral finite element meshes based upon marching cube algorithmlink 김상준; 임세영; et al, 한국과학기술원, 2018 |
2006 | 많은 유량에서의 슬릿형 가상충돌기의 성능에 관한 실험적 연구 = An experimental study on the performance of the large volume rectangular jet virtual impactorlink 박성호; Park, Sung-Ho; et al, 한국과학기술원, 1989 |
2007 | 망막 질환 진단을 위한 3차원 고해상도 OFDI 시스템 개발 = Development of 3D high resolution Optical Frequency Domain Imaging for diagnosis of retinal diseaselink 김용주; Kim, Yong-Joo; 오왕열; Oh, Wang-Yuhl; et al, 한국과학기술원, 2013 |
2008 | 망막 혈관의 혈류속도 이미징을 위한 하이브리드 빔 스캐닝 방식의 정량적 광간섭단층혈관영상 이미징 시스템 개발 = Development of hybrid-beam scanning based retinal quantitative optical coherence tomography angiographylink 김경환; 오왕열; et al, 한국과학기술원, 2020 |
2009 | 맞대기 용접공정에서 신경회로망을 이용한 용융지 크기 예측에 관한 연구 = A study on the estimation of weld pool sizes using neural network in butt welding processlink 임재하; Lim, Jae-Ha; et al, 한국과학기술원, 1994 |
2010 | 매개변수가진을 받는 테이프의 횡방향 충격응답을 이용한 종방향 진동의 추정 = Estimation of longitudinal vibration using impulse response in the transverse direction of a parametrically excitated tapelink 김도균; Kim, Do-Gyun; et al, 한국과학기술원, 1994 |
2011 | 매니퓰레이터를 위한 시간지연제어기의 해석 및 설계 = Analysis and design of time delay controller for manipulatorlink 김태영; Kim, Tae-Young; et al, 한국과학기술원, 1999 |
2012 | 매달린 물체 지지 씨스템에 대한 최적 지지점 결정 및 구조설계 = Optimal support location and mounting structural design for hanging bodieslink 최창곤; Choi, Chang-Gon; et al, 한국과학기술원, 1987 |
2013 | 매미의 발음 기제를 모사한 음향 발생 장치의 설계에 관한 연구 = A study on the design of an acoustic actuatorlink 조완호; Cho, Wan-Ho; et al, 한국과학기술원, 2004 |
2014 | 매크로 파라메트릭 방법론을 이용한 CAD 모델의 교환 = Exchange of CAD models using macro parametric approachlink 문두환; Mun, Du-Hwan; et al, 한국과학기술원, 2001 |
2015 | 매크로/마이크로 로봇의 공동작용 제어 = Coordinated control of a macro/micro robotlink 황정훈; Hwang, Jung-Hun; et al, 한국과학기술원, 1999 |
2016 | 맥기번 구동기의 동적 모델링과 제어 = Dynamic modeling and control of Mckibben actuatorlink 부준호; 김경수; et al, 한국과학기술원, 2021 |
2017 | 맥동 연소 현상에 대한 실험적 연구 = An experimental study on phenomena of pulsating combustionlink 길상인; Keel, Sang-In; 신현동; 김상수; et al, 한국과학기술원, 1986 |
2018 | 맥동 연소기의 특성에 관한 실험적 연구 = An experimental study on characteristics of pulsating combustorlink 정상화; Jeong, Sang-Hwa; et al, 한국과학기술원, 1985 |
2019 | 맥동 유동내의 원봉 주위의 주파수 잠김과 물질 전달에 관한 수치 해석 연구 = Numerical study on lock-on and mass transfer from a circular cylinder in pulsating flowslink 송귀은; Song, Kwe-En; et al, 한국과학기술원, 1996 |
2020 | 맥동 유동장 내의 원봉 주위의 물질전달에 관한 실험적 연구 = An experimental study of mass transfer from a circular cylinder in a pulsating flowlink 황권상; Hwang, Kweon-Sang; et al, 한국과학기술원, 1993 |
2021 | 맥동 유동장내의 수직 평판 후류에 관한 이산 와류 수치 해석 = Discrete vortex simulation of pulsating flow behind a normal platelink 김영남; Kim, Young-Nam; et al, 한국과학기술원, 1992 |
2022 | 맥동관 내부의 열전달에 관한 실험적 연구 = Experimental study on the heat transfer in pulse tubelink 김민규; Kim, Min-Gyu; et al, 한국과학기술원, 2000 |
2023 | 맥동관 냉동기의 열 펌핑 메커니즘에 관한 이론적 연구 = Theoretical study on the heat pumping mechanism in pulse tube refrigeratorlink 정제헌; Jung, Je-Heon; et al, 한국과학기술원, 2000 |
2024 | 머리 추적을 이용한 헤드폰 기반의 외재화 음원 모사 = Headphone based mimicry of externalized sound using head trackinglink 정지현; Jeong, Ji-Hyeon; et al, 한국과학기술원, 2014 |
2025 | 머리전달함수 기반 음원 위치 추정을 위한 양이 상호상관 기반 시계열 데이터 마스킹 방법 = Time data masking method using interaural cross-correlation for sound source localization algorithm using head-related transfer functionlink 최상민; Choi, Sangmin; et al, 한국과학기술원, 2022 |
2026 | 머리전달함수 데이터베이스를 이용한 음원 위치 추정 방법에 관한 연구 = Sound source lo- ocalization using HRTF databaselink 황성목; Hwang, Sung-Mok; et al, 한국과학기술원, 2006 |
2027 | 머리전달함수 측정시스템의 개발과 한국인의 머리전달함수 분석 = Measurement system and analysis of Korean head-related transfer functionslink 주용원; Ju, Yong-Won; et al, 한국과학기술원, 2012 |
2028 | 머리전달함수 측정장치의 개발과 분석 = The development of the HRTF measurement system and its analysislink 이윤재; Lee, Yun-Jae; 박윤식; Park, Youn-sik; et al, 한국과학기술원, 2010 |
2029 | 머신 러닝을 이용한 창의적 사고 측정 시스템에 관한 연구 = (A) study on measurement system of creative thinking using machine learninglink 박성연; 양민양; et al, 한국과학기술원, 2018 |
2030 | 머신 비전을 이용한 전력 계량기 자동 인식 = Automatic recognition of electric power meter using machine visionlink 김범; Kum, Pum; et al, 한국과학기술원, 1997 |
2031 | 머신 비젼을 이용한 고정밀 CNC 공구연삭 시스템에 관한 연구 = A study on high-precision CNC tool grinding system using machine visionlink 윤홍석; Youn, Hong-Seok; et al, 한국과학기술원, 2005 |
2032 | 머신러닝 기반 2차원 형상에 따른 탄성특성 예측모델 구축 및 형상최적화 연구 = Construction of elasticity prediction machine learning model and shape optimizationlink 박은정; 유승화; et al, 한국과학기술원, 2022 |
2033 | 머신러닝을 이용한 $Cu_{64}Zr_{36}$ 메탈릭 글래스의 국부적인 전단 변형 구간 예측 = Prediction of irreversible jumps in $Cu_{64}Zr_{36}$ metallic glass using machine learninglink 이재민; 유승화; et al, 한국과학기술원, 2020 |
2034 | 머신러닝을 이용한 복합접착기둥의 최적화 = Optimization of composite adhesive pillar using machine learninglink 김소진; 유승화; et al, 한국과학기술원, 2021 |
2035 | 멀티-에이전트 시스템을 위한 모션 묘사 스크립트 = MDS: motion description script for Multi-Agent Systemlink 임정수; Lim, Jeong-Soo; et al, 한국과학기술원, 2012 |
2036 | 멀티모달 다중 카메라를 활용한 지하전력구 송전선의 선형 변형 추출을 위한 연구 = (A) study on deformation extraction of power transmission lines in underground power stations using multi-modal multiple cameraslink 송형주; 김수현; Kim, Soohyun; 김경수; et al, 한국과학기술원, 2021 |
2037 | 멀티모달 센서퓨전 기반의 강건한 차량 경로 재구성 및 매개변수화된 차선 지도 구축 = Robust vehicle trajectory reconstruction and parameterized lane map generation via multi-modal sensor fusionlink 전진환; 최세범; et al, 한국과학기술원, 2023 |
2038 | 멀티탭 병렬 복조 기반 고정밀 time-of-flight sensor = High precision time-of-flight sensor based on multi-tap parallel demodulationlink 권욱현; Kwon, Wook-Hyeon; et al, 한국과학기술원, 2022 |
2039 | 메조 스케일 T-분기관에서 기포 길이가 2상 플러그류 분배에 미치는 영향 = Effect of bubble length on two-phase plug flow split at a meso-scale T-junctionlink 홍주혁; Hong, Ju-Hyuk; et al, 한국과학기술원, 2011 |
2040 | 메카니즘의 컴퓨터 표현 및 기구학적 해석 프로그램의 개발 = A software development study for computer representation and kinematic analysis of mechanismslink 김경영; Kim, Kyung-Young; et al, 한국과학기술원, 1990 |
2041 | 메타물질의 실제적 응용을 위한 신축성 메타물질 제작 = Fabrication of stretchable metamaterials for practical applicationlink 김성남; Kim, Seong-Nam; et al, 한국과학기술원, 2012 |
2042 | 메탄 내부개질 반응을 통한 고체산화물 연료전지의 탄소침적 억제에 관한 연구 = A study on the suppression of carbon deposition in solid oxide fuel cells through methane internal reforminglink 강윤혁; Kang, Yun-Hyeok; et al, 한국과학기술원, 2007 |