Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 9541 to 9600 of 12271
| Unsteady propagation of premixed methane/propane flames in a mesoscale disk burner of variable-gaps Jang, Hye Jin; Jang, Gyu Min; Kim, Nam Il, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.37, no.2, pp.1861 - 1868, 2019-01 |
| Unsteady separated and reattaching turbulent flow over a two-dimensional square rib Liu, YZ; Ke, F; Sung, Hyung Jin, JOURNAL OF FLUIDS AND STRUCTURES, v.24, pp.366 - 381, 2008-04 |
| Unsteady thermal flow analysis in a heat regenerator with spherical particles Park, PM; Cho, HC; Shin, Hyun Dong, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.27, pp.161 - 172, 2003-02 |
| Unveiling the Annealing-Dependent Mechanical Properties of Freestanding Indium Tin Oxide Thin Films Oh, Seung Jin; Kwon, Jeong Hyun; Lee, Sangmin; Choi, Kyung Cheol; Kim, Taek-Soo, ACS APPLIED MATERIALS & INTERFACES, v.13, no.14, pp.16650 - 16659, 2021-04 |
| Upper limits on the isotropic gravitational-wave background from Advanced LIGO and Advanced Virgo's third observing run Abbott, R; Noh, Minkyun, PHYSICAL REVIEW D, v.104, no.2, 2021-07 |
| Urban localization based on aerial imagery by correcting projection distortion Kim, Jonghwi; Cho, Yonghoon; Kim, Jinwhan, AUTONOMOUS ROBOTS, v.47, no.3, pp.299 - 312, 2023-03 |
| Use of 2-dimensional cell monolayers and 3-dimensional microvascular networks on microfluidic devices shows that iron increases transendothelial adiponectin flux via inducing ROS production Yoon, Nanyoung; Kim, Seunggyu; Sung, Hye Kyoung; Dang, Thanh Q.; Jeon, Jessie S.; Sweeney, Gary, BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS, v.1865, no.2, pp.129796, 2021-02 |
| USE OF A VERTICAL THROUGH-FLOW TO STRATIFY AN INITIALLY ISOTHERMAL CONTAINED FLUID Hyun, Jae Min; HYUN, KCK, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.9, no.2, pp.220 - 224, 1988-06 |
| Use of an electrospray for the generation of bacterial bioaerosols Kim, Kyoung-Tae; Kim, Woo-Jin; Yun, Sun-Hwa; Lee, Jun-Hyun; Kim, Sang-Soo; Lee, Byung-Uk, JOURNAL OF AEROSOL SCIENCE, v.39, pp.365 - 372, 2008-04 |
| Use of dFRFs for diagnosis of asymmetric anisotropic properties in rotor-bearing system Joh, CY; Lee, Chong-Won, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, v.118, no.1, pp.64 - 69, 1996-01 |
| Use of dFRFs for identification of travelling wave modes in rotating disks Kim, ME; Lee, Chong-Won, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, v.120, no.3, pp.719 - 726, 1998-07 |
| Use of directional spectra for detection of engine cylinder power fault Lee, Chong-Won; Han, YS; Park, JP, SHOCK AND VIBRATION, v.4, no.5-6, pp.391 - 401, 1997 |
| Use of Grid Method for Efficient Global Optimum Design of Robot Kinematics Park, Joon Young; Chang, Pyung Hun; Kim, Jin Oh, International Workshop on Human-Friendly Welfare Robotic Systems, pp.99-104, 2004 |
| Use of nonsingular boundary integral formulation for reducing errors due to near-field measurements in the boundary element method based near-field acoustic holography Kang, SC; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.109, no.4, pp.1320 - 1328, 2001-04 |
| Use of rigid reflectors for the virtual increase of field data in the near-field acoustical holography Kim, Sung-Il; Ih, Jeong-Guon; Jeong, Ji-Hoon, JOURNAL OF COMPUTATIONAL ACOUSTICS, v.15, no.1, pp.49 - 61, 2007-03 |
| Use of simulated thermal cues for material discrimination and identification with a multi-fingered display Yang, GH; Jones, LA; Kwon, Dong-Soo, PRESENCE-TELEOPERATORS AND VIRTUAL ENVIRONMENTS, v.17, pp.29 - 42, 2008-02 |
| Use of the Normalized Design Parameters for Designing a Strip Speaker Operated by the Traveling-Wave Control Method Lee, Ki-Ho; Ih, Jeong-Guon, IEEE ACCESS, v.10, pp.22941 - 22951, 2022-03 |
| Useful Conservation Sums in Molecular Dynamics and Atomistics Kim, Saeja O.; Earmme, Youn-Young; Kim, Kyung-Suk, MATHEMATICS AND MECHANICS OF SOLIDS, v.15, no.8, pp.885 - 895, 2010 |
| User-assisted integrated method for controlling level of detail of large-scale B-rep assembly models Kwon, Soonjo; Kim, Byung Chul; Mun, Duhwan; Han, Soonhung, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, v.31, no.9, pp.881 - 892, 2018-09 |
| User-driven treadmill using walking speed estimated from plantar pressure sensor Cha, M; Han, Soonhung; Kim, H; Mun, D, ELECTRONICS LETTERS, v.53, no.8, pp.524 - 526, 2017-04 |
| Using a Disturbance Observer for Eccentricity Compensation in Optical Storage Systems Kim, Kyung-Soo, TRANSACTIONS ON CONTROL, AUTOMATION, AND SYSTEMS ENGINEERING, v.4, no.4, pp.319 - 323, 2002-12 |
| Using Arc Pressure to Investigate the Effects of Energy Source Distance on Arc Plasma Behaviour in Pulsed Nd:YAG Laser/Tungsten Inert Gas (TIG) Arc Hybrid Welding Zhang, LJ; Na, Suck-Joo; Zhang, JX, LASERS IN ENGINEERING, v.33, no.4-6, pp.279 - 292, 2016 |
| Using convolutional neural networks to predict composite properties beyond the elastic limit Yang, Charles; Kim, Youngsoo; Ryu, Seunghwa; Gu, Grace X., MRS COMMUNICATIONS, v.9, no.02, pp.609 - 617, 2019-06 |
| Using Intaglio-Shaped Bumps for Increasing the Conductive Particle Density in Lateral Thermosonic Process With Anisotropic Conductive Film Kim, Kyung Rok; Ha, Chang Wan; Kim, Kyung-Soo; Yun, Won-Soo, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.4, no.3, pp.371 - 376, 2014-03 |
| Using lateral vibration for thermosonic flip-chip interconnection with anisotropic conductive film Kim, Kyung-Soo; Ha, CW; Jang, TY; Joung, SW; Yun, WS, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.20, no.10, 2010-10 |
| Using scales in the multiobjective approach Kim, Kyung-Soo; Jabbari, F, IEEE TRANSACTIONS ON AUTOMATIC CONTROL, v.45, pp.973 - 977, 2000 |
Using the Stator Current Ripple Model for Real-Time Estimation of Full Parameters of a Permanent Magnet Synchronous Motor Choi, Kyunghwan; Kim, Yonghun; Kim, Kyung-Soo; Kim, Seok-Kyoon, IEEE ACCESS, v.7, pp.33369 - 33379, 2019-03 |
| Utilization potential of intraluminal optical coherence tomography for the Eustachian tube Byun, Hayoung; Kim, Yeon Hoon; Xing, Jingchao; Shin, Su-Jin; Lee, Seung Hwan; Yoo, Hongki; Chung, Jae Ho, SCIENTIFIC REPORTS, v.11, no.1, pp.6219, 2021-03 |
| UV-LEDs for the Disinfection and Bio-Sensing Applications Won, Wan-Sik; Tran, Le Giang; Park, Woo-Tae; Kim, Kyoung-Kook; Shin, Choongsoo S.; Kim, Namkeun; KIM, Young-Jin; et al, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.19, no.12, pp.1901 - 1915, 2018-12 |
| UV-nanoimprint lithography using a diamond-like carbon stamp Yang, Dong-Yol; Jeong, JH; Kim, KD; Sim, Youngsuk; Choi, DG; Lee, Eung-sug; Park, SH; et al, PROCEEDINGS- SPIE THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING, v.6151, no.2, pp.6151 - 6192, 2006-03 |
| UVtac: Switchable UV Marker-Based Tactile Sensing Finger for Effective Force Estimation and Object Localization Kim, Woojong; Kim, Won Dong; Kim, Jeong-Jung; Kim, Chang-Hyun; Kim, Jung, IEEE ROBOTICS AND AUTOMATION LETTERS, v.7, no.3, pp.6036 - 6043, 2022-07 |
| V-그루브 미세가공에서의 공구 및 공작물 셋업 해석 조정우; 양민양, 대한기계학회논문집 A, v.30, no.8, pp.957 - 964, 2006-08 |
| Vacuum chamber-free centrifuge with magnetic bearings Park, Cheol Hoon; Kim, Soohyun; Kim, Kyung-Soo, REVIEW OF SCIENTIFIC INSTRUMENTS, v.84, no.9, 2013-09 |
| Vacuum insulation properties of glass wool and opacified fumed silica under variable pressing load and vacuum level Kim, Jongmin; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.64, pp.783 - 791, 2013-09 |
| Vacuum insulation properties of phenolic foam Kim, Jongmin; Lee, Jae-Hyug; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.19-20, pp.5343 - 5349, 2012-09 |
| Vacuum maintenance in vacuum insulation panels exemplified with a staggered beam VIP Kwon, JS; Jang, CH; Jung, H; Song, Tae-Ho, ENERGY AND BUILDINGS, v.42, no.5, pp.590 - 597, 2010-05 |
| Vacuum-assisted microcontact printing (mu CP) for aligned patterning of nano and biochemical materials Kang, Hyun-Wook; Leem, Ju-Young; Ko, Seung-Hwan; Yoon, Sang-Youl; Sung, Hyung-Jin, JOURNAL OF MATERIALS CHEMISTRY C, v.1, no.2, pp.268 - 274, 2013 |
| Validation of applicability of induction bending process to P91 piping of prototype Gen-IV sodium-cooled fast reactor (PGSFR) Na, Tae-Won; Kim, Nak-Hyun; Park, Chang-Gyu; Kim, Jong-Bum; Oh, Il-Kwon, NUCLEAR ENGINEERING AND TECHNOLOGY, v.55, no.10, pp.3571 - 3580, 2023-10 |
| VALIDATION OF NUMERICAL APPROACH FOR THE SEDIMENT OF MULTI-SIZE PARTICLES IN A FLUID CONTAINER 지영무; 최상민, 한국전산유체공학회지, v.18, no.2, pp.93 - 98, 2013-06 |
| Validity of classical nucleation theory for Ising models Ryu, Seunghwa; Cai, Wei, PHYSICAL REVIEW E, v.81, no.3, 2010-03 |
| Vapor absorption and Marangoni Flows in Evaporating Drops Ryu, Junil; Ko, Han Seo; Kim, Hyoungsoo, LANGMUIR, v.38, no.7, pp.2185 - 2191, 2022-02 |
| Vapor distribution changes evaporative flux profiles of a sessile droplet Kuk, Minhyeok; Pyeon, Jeongsu; Kim, Hyoungsoo, JOURNAL OF COLLOID AND INTERFACE SCIENCE, v.652, pp.646 - 652, 2023-12 |
| Variability of displacements and stresses at random variable state Noh, Hyuk Chun; Lee, PhillSeung; Choi, Chang Koon, STRUCTURAL ENGINEERING AND MECHANICS, v.31, no.6, pp.751 - 754, 2009-04 |
| Variable PID Gain Tuning Method Using Backstepping Control With Time-Delay Estimation and Nonlinear Damping Lee, Jun Young; Jin, Maolin; Chang, Pyung-Hun, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.61, no.12, pp.6975 - 6985, 2014-12 |
| Variable selection using Gaussian process regression-based metrics for high-dimensional model approximation with limited data Lee, Kyungeun; Cho, Hyunkyoo; Lee, Ikjin, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.59, no.5, pp.1439 - 1454, 2019-05 |
| VARIABLE VIEW IMAGING SYSTEM: AN OPTOMECHATRONIC SYSTEM FOR THE OBSERVATION OF MICRO OBJECTS WITH VARIABLE VIEW DIRECTION Tao, Xiaodong; Cho, Hyungsuck, INTERNATIONAL JOURNAL OF OPTOMECHATRONICS, v.3, no.2, pp.91 - 115, 2009 |
| Variable-node element families for mesh connection and adaptive mesh computation Lim, Jae-Hyuk; Sohn, Dong-Woo; Im, Se-Young, STRUCTURAL ENGINEERING AND MECHANICS, v.43, no.3, pp.349 - 370, 2012-08 |
| Variable-node elements for non-matching meshes by means of MLS (moving least-square) scheme Lim, Jae Hyuk; Im, Seyoung; Cho, Young-Sam, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.72, no.7, pp.835 - 857, 2007-11 |
| Variable-node finite elements with smoothed integration techniques and their applications for multiscale mechanics problems Lim, JH; Sohn, D; Lee, JH; Im, Seyoung, COMPUTERS & STRUCTURES, v.88, no.7-8, pp.413 - 425, 2010-04 |
| Variable-node plate and shell elements with assumed natural strain and smoothed integration methods for nonmatching meshes Sohn, Dong-Woo; Im, Se-Young, COMPUTATIONAL MECHANICS, v.51, no.6, pp.927 - 948, 2013-06 |
| Variation simulation model for pre-stress effect on welding distortion in multi-stage assemblies Choi, Woo Young; Chung, Hyun, THIN-WALLED STRUCTURES, v.127, pp.832 - 843, 2018-06 |
| Variation Simulation of Compliant Metal Plate Assemblies Considering Welding Distortion Choi, Woo Young; Chung, Hyun, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.137, no.3, 2015-06 |
| Variational formulation of Poissons equation in semiconductor at quasi-equilibrium and its applications Lee, CY; Lee, Kwyro; Kim, Choong Ki; Kim, Moon Uhn, IEEE TRANSACTIONS ON ELECTRON DEVICES, v.44, no.9, pp.1507 - 1513, 1997-09 |
| Variational multiscale analysis of elastoplastic deformation using meshfree approximation Yeon, Jeoung-Heum; Youn, Sung-Kie, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.45, no.17, pp.4709 - 4724, 2008-08 |
| VARIATIONAL MULTISCALE ANALYSIS OF SOLIDS WITH STRAIN GRADIENT PLASTIC EFFECTS USING MESHFREE APPROXIMATION Yeon, Jeoung-Heum; Youn, Sung-Kie, INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS, v.2, no.4, pp.601 - 626, 2005-12 |
| Vasculature-on-a-chip for in vitro disease models Kim, Seunggyu; Kim, Wanho; Lim, Seongjin; Jeon, Jessie Sungyun, BIOENGINEERING, v.4, no.1, 2017-03 |
| VCM을 이용한 나노 정밀도 스캐닝 용 초정밀 이중 스테이지 김기현; 권대갑; 최영만; 김동민; 남병욱; 이석원; 이문구, 한국정밀공학회지, v.22, no.5, pp.103 - 112, 2005-05 |
| VCM을 이용한 나노 정밀도 스캐닝 용 초정밀 이중 스테이지 Kim, Ki Hyun; Choi, Young Man; Kim, Dong Min; Nam, Byoung Uk; Lee, Suk Won; Lee, Moon Gu; Gweon, Dae Gab, Journal of the Korean Society for Precision Engineering, Vol.22, No.5, 2005-05 |
| VCO 노즐에서 고압으로 분사되는 디젤분무의 특성 강진석; 배충식, 한국자동차공학회 논문집, v.8, no.3, pp.28 - 36, 2000-05 |
| VCO노즐에서 고압으로 분사되는 디젤분무의 특성 강, 진석; 배, 충식; Kang, Jinsuk; Bae, Choongsik, 한국자동차공학회 2000년도 춘계학술대회, pp.334-340, 2000-05 |
Discover
Open Access
Date issued
- 4,098 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989