Showing results 5581 to 5640 of 12273
Investigation of DPD transport properties in modeling bioparticle motion under the effect of external forces: Low Reynolds number and high Schmidt scenarios Waheed, Waqas; Alazzam, Anas; Al-Khateeb, Ashraf N.; Sung, Hyung Jin; Abu-Nada, Eiyad, JOURNAL OF CHEMICAL PHYSICS, v.150, no.5, 2019-02 |
Investigation of edge taping method applied to vacuum insulation panels Choi, Bongsu; Song, Tae-Ho, ENERGY AND BUILDINGS, v.134, pp.52 - 60, 2017-01 |
Investigation of effective material properties in composites with internal defect or reinforcement particles Yang, CH; Huh, Hoon; Hahn, HT, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.42, no.24-25, pp.6141 - 6165, 2005-12 |
Investigation of effective thermoelectric properties of composite with interfacial resistance using micromechanics-based homogenisation Jung, Jiyoung; Lee, Sangryun; Ryu, Byungki; Ryu, Seunghwa, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.144, 2019-12 |
Investigation of effects of viscoelastic boundary supports on transient sound radiated from a rectangular plate by modal strain energy method Fan, ZJ; Kim, Kwang-joon, KSME INTERNATIONAL JOURNAL, v.11, no.5, pp.530 - 536, 1997-10 |
Investigation of electrospun Ba0.5Sr0.5Co0.8Fe0.2O3-delta-Gd0.1Ce0.9O1.95 cathodes for enhanced interfacial adhesion Lee, Sanghun; Lee, Kunho; Kang, Sungmin; Kang, Juhyun; Song, Sejin; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.43, no.46, pp.21535 - 21546, 2018-11 |
Investigation of Elongation at Fracture in a High Speed Sheet Metal Forming Process Huh, Hoon; Kim, SB; Song, JH; Yoon, JH; Lim, JH; Park, SH, STEEL RESEARCH INTERNATIONAL, v.80, no.5, pp.316 - 322, 2009-05 |
Investigation of fiber Bragg grating as a spectral notch shaper for single-pulse coherent anti-Stokes Raman spectroscopy Oh, Seung Ryeol; Park, Joo Hyun; Kim, Kyung-Soo; Lee, Eun Seong; Lee, Jae Yong; Kim, Soohyun, OPTICS COMMUNICATIONS, v.383, pp.107 - 112, 2017-01 |
Investigation of gas permeation through Al-metallized film for vacuum insulation panels Jung, Hae-Yong; Jang, Choong-Hyo; Yeo, In-Seok; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.56, no.1-2, pp.436 - 446, 2013-01 |
Investigation of gas-phase reactions in the mixing region for hydrocarbon autothermal reforming applications Kim, Sun-Young; Carstensen, Hans-Heinrich; Dean, Anthony M.; Bae, Joong-Myeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.37, no.9, pp.7545 - 7553, 2012-05 |
Investigation of heat transfer and simulation of metal flow in hot upsetting Im, Yong-Taek, ASME TRANSACTIONS, JOURNAL OF ENGINEERING FOR INDUSTRY, v.111, no.4, pp.337 - 344, 1989-11 |
Investigation of heat transfer effect on ramp-rate limitation of superconducting cable Kim, S; Jeong, Sangkwon, IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, v.14, no.2, pp.1365 - 1368, 2004-06 |
Investigation of helium injection cooling to liquid oxygen propellant chamber Cho, N; Kwon, O; Kim, Y; Jeong, Sangkwon, CRYOGENICS, v.46, pp.132 - 142, 2006-02 |
Investigation of helium injection cooling to liquid oxygen under pressurized condition Cho, N; Kwon, O; Kim, Y; Jeong, Sangkwon, CRYOGENICS, v.46, no.11, pp.778 - 793, 2006-11 |
Investigation of Metal Flow in Non-Isothermal Forging Using Ring and Spike Tests Im, Yong-Taek; Vardan, O.; Shen, G.; Altan, T., CIRP ANNALS - MANUFACTURING TECHNOLOGY, v.37, no.1, pp.225 - 230, 1988-01 |
INVESTIGATION OF METAL FLOW IN OPEN-DIE FORGING WITH DIFFERENT DIE AND BILLET GEOMETRIES DUDRA, SP; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.21, no.2, pp.143 - 154, 1990-03 |
INVESTIGATION OF METALLIC BINDERS FOR ALUMINA THROUGH BOND STRENGTH TEST Yang, Min-Yang; KEANE, JJ; KRAMER, BM, SCRIPTA METALLURGICA, v.22, no.5, pp.643 - 647, 1988-05 |
Investigation of microstructure characteristics of commercially pure aluminum during equal channel angular extrusion Kim, KJ; Yang, Dong-Yol; Yoon, Jeong Whan, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.485, no.1-2, pp.621 - 626, 2008-06 |
Investigation of neon-nitrogen mixed refrigerant Joule-Thomson cryocooler operating below 70 K with precooling at 100 K Lee, Jisung; Oh, Haejin; Jeong, Sangkwon, CRYOGENICS, v.61, pp.55 - 62, 2014-05 |
Investigation of on-board hybrid pulse tube cryocooler for high temperature superconducting rotor Nam, JW; Jeong, Sangkwon; Kim, HS; Jung, JH; Kwon, YK, IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, v.15, pp.2190 - 2193, 2005-06 |
Investigation of optimal hydrogen sensing performance in semiconducting carbon nanotube network transistors with palladium electrodes Choi, Bongsik; Lee, Dongil; Ahn, Jae-Hyuk; Yoon, Jinsu; Lee, Juhee; Jeon, Minsu; Kim, Dong Myong; et al, APPLIED PHYSICS LETTERS, v.107, no.19, 2015-11 |
Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints Kim, JK; Kim, HS; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.17, no.3, pp.329 - 352, 2003 |
Investigation of oscillating flow friction factor for cryocooler regenerator considering cryogenic temperature effect Nam, K; Jeong, Sangkwon, CRYOGENICS, v.45, no.12, pp.733 - 738, 2005-12 |
Investigation of Plane Strain Fatigue Crack Growth Behavior by Using Side-Grooved Specimens j.h.kim; j.h.song, 대한기계학회논문집, v.16, no.1, pp.70 - 76, 1992 |
Investigation of radiative scattering effect of VIP filler materials using a novel statistical formulation Choi, Bongsu; Lee, Jaehyug; Song, Tae-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.89, pp.339 - 344, 2015-10 |
Investigation of the characteristics of a compact steam reformer integrated with a water-gas shift reactor Seo, Yu Taek; Yoon, Wang Lai; Seo, Yong Seong; Seo, Dong Joo, JOURNAL OF POWER SOURCES, v.161, no.2, pp.1208 - 1216, 2006-10 |
Investigation of the cogging process by three-dimensional thermo-viscoplastic finite element analysis Cho, JR; Park, CY; Yang, Dong-Yol, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, v.206, no.B4, pp.277 - 286, 1992 |
INVESTIGATION OF THE EFFECT OF CEMENT THICKNESS ON AN IMPLANT BY FINITE-ELEMENT STRESS-ANALYSIS Kwak, Byung Man; LIM, OK; KIM, YY; RIM, K, INTERNATIONAL ORTHOPAEDICS, v.2, no.4, pp.315 - 319, 1979-08 |
Investigation of the Effect of Weighting between sEMG and Interaction Force in Intention Extraction for the Control of an Upper-Limb Assistive Device Kim, Sangjoon; Lee, Hyosang; Kim, Jung, Journal of Medical Robotics Research, v.2, no.2, 2017-06 |
Investigation of the ejector application in the cryogenic Joule-Thomson refrigeration system Lee, Ji-Sung; Baek, Seung-Whan; Jeong, Sangkwon, ENERGY, v.165, no.B, pp.269 - 280, 2018-12 |
Investigation of the Flow Pattern in a Complex Inlet Duct of a Heat Recovery Steam Generator Shin, Hyuntae; Kim, Daehee; Ahn, Hyungjun; Choi, Sangmin; Myoung, Gichul, ENERGY AND POWER, v.2, no.1, pp.1 - 8, 2012 |
Investigation of the Structures of Attached and Lifted Flames with Various Ignition Positions over a Triple Concentric Burner in the Hysteresis Regime Kim, Hyeon Jun; Choe, Jinhoon; Shin, Hyun Dong, ENERGY & FUELS, v.24, no.1, pp.324 - 332, 2010-01 |
Investigation of thermal conductivity for liquid metal composites using the micromechanics-based mean-field homogenization theory Jung, Jiyoung; Jeong, Seung Hee; Hjort, Klas; Ryu, Seunghwa, SOFT MATTER, v.16, no.25, pp.5840 - 5847, 2020-07 |
Investigation of thermal contact conductance of bare copper-copper and aluminum 1070-aluminum 1070 interfaces at low temperatures between 10 and 70 K Han, Junho; Kwon, Dohoon; Kim, Bokeum; Bae, Junhyuk; Jeong, Sangkwon, CRYOGENICS, v.133, 2023-07 |
Investigation of three-dimensional pattern collapse owing to surface tension using an imperfection finite element model Park, SH; Kim, KH; Lim, Tae Woo; Yang, Dong-Yol; Lee, KS, MICROELECTRONIC ENGINEERING, v.85, no.2, pp.432 - 439, 2008-02 |
Investigation of two-phase heat transfer coefficients of argon-freon cryogenic mixed refrigerants Baek, Seungwhan; Lee, Cheonkyu; Jeong, Sang-Kwon, CRYOGENICS, v.64, pp.29 - 39, 2014-11 |
Investigation on AC losses in a superconducting linear motor Kim, Bokeum; Jin, Lingxue; Jeong, Sangkwon, CRYOGENICS, v.102, pp.22 - 27, 2019-09 |
Investigation on arc light intensity in gas metal arc welding .2. Application to weld seam tracking Choong Don Yoo, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.211, no.5, pp.355 - 363, 1997 |
Investigation on arc light intensity in gas metal arc welding Part 1: relationship between arc light intensity and arc length Yoo, Choong-Don; Yoo, YS; Sunwoo, HK, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B. MANAGEMENT AND ENGINEERING MANUFACTURE, v.211, no.5, pp.345 - 354, 1997 |
Investigation on breakup characteristics of multicomponent single droplets of nanofluid and water-in-oil emulsion using a pulse laser Jang, Gyu Min; Kim, Nam Il, FUEL, v.310, 2022-02 |
Investigation on Cryogenic Refrigerator and Cooling Schemes for Long Distance HTS Cable Lee, Jisung; Lee, Cheonkyu; Jeong, Sangkwon; Park, Jiho; Hwang, Si Dole; Yang, Hyung Suk; Jung, Se Yong; et al, IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, v.25, no.3, 2015-06 |
Investigation on feasibility of pulse tube engine Ki, Tae-Kyung; Jeong, Sangkwon, Journal of the Korea Institute of Applied Superconductivity and Cryogenics, v.14, no.1, pp.34 - 37, 2012-03 |
Investigation on heat transfer in line chill-down process with various cryogenic fluids Jin, Lingxue; Lee, Ji-Sung; Jeong, Sangkwon, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.150, 2020-04 |
Investigation on liquid helium pressurization process using a heater in a liquid propellant rocket In, S; Jeong, Sangkwon; Kim, H, CRYOGENICS, v.44, no.6-8, pp.467 - 474, 2004-06 |
Investigation on structural availability application in beam design: Buckling strength and structural deterioration due to corrosion Choung, Choung Ho; Lee, Sangick; Chang, Daejun, OCEAN ENGINEERING, v.184, pp.206 - 215, 2019-07 |
Investigation on the Effect of Cyclic Stretch and Hypoxia on Recovery of Damaged Skeletal Muscle Cells Using Microfluidic System Kim, Jaesang; Kim, Wanho; Ahn, Jisong; Jang, Young Jin; Park, Hyung-Soon; Jeon, Jessie S., ADVANCED MATERIALS TECHNOLOGIES, v.6, no.11, pp.2100465, 2021-11 |
Investigation on the pressure drop characteristics of cryocooler regenerators under oscillating flow and pulsating pressure conditions Choi, SR; Nam, KW; Jeong, Sangkwon, CRYOGENICS, v.44, no.3, pp.203 - 210, 2004-03 |
Investigation on the stability evaluation of multi-strand superconducting cable related with ramp-rate limitation Kim, Seokho; Sim, Kideok; Sung, Ki-Cheol; Jeong, Sangkwon, PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, v.466, no.1-2, pp.82 - 95, 2007-11 |
Investigation on the stability of two-strand superconducting cable related with ramp-rate limitation Kim, S; Jeong, Sangkwon, PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, v.407, no.1-2, pp.62 - 72, 2004-08 |
Investigation on the turbulent stress anisotropy of axisymmetric turbulence under rapid rotation Park, Ju Yeop; Chung, Myung Kyoon, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.23, no.3, pp.768 - 774, 2009-06 |
Investigation on two-stage Stirling cooler driven by two independent displacers Kim, Bokeum; Jeong, Sangkwon; Kwon, Dohoon, CRYOGENICS, v.131, 2023-04 |
Investigation on vapor-cooled current leads operating in a pulse mode Jeong, Sangkwon; In, S, CRYOGENICS, v.44, no.4, pp.241 - 248, 2004-04 |
Investigations of denoising source separation technique and its application to source separation and identification of mechanical vibration signals Cheng, Wei; Zhang, Zhousuo; Lee, Seungchul; He, Zhengjia, JOURNAL OF VIBRATION AND CONTROL, v.20, no.14, pp.2100 - 2117, 2014-10 |
Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Agarwal, Rashmi A.; Gupta, Tarun; Agarwal, Avinash Kumar, APPLIED ENERGY, v.206, pp.1203 - 1213, 2017-11 |
Inviscid analysis of two-dimensional airfoils in unsteady motion using conformal mapping Choi, Do Hyung; Landweber, L., AIAA JOURNAL, v.28, no.12, pp.2025 - 2033, 1990-12 |
Ionic Intercalation in Two-Dimensional van der Waals Materials: In Situ Characterization and Electrochemical Control of the Anisotropic Thermal Conductivity of Black Phosphorus Kang, Joon Sang; Ke, Ming; Hu, Yongjie, NANO LETTERS, v.17, no.3, pp.1431 - 1438, 2017-03 |
Ionic liquid template assisted synthesis of porous nano-silica nails Verma, Yogendra Lal; Singh, Rajendra Kumar; Oh, Il-Kwon; Chandra, Suresh, RSC ADVANCES, v.4, no.75, pp.39978 - 39983, 2014 |
iRINGTools를 활용한 ISO 15926 기반 기자재 참조 데이터 서버의 구축과 활용 김봉철; 박상진; 권순조; 변수진; 문두환; 한순흥, 한국CAD/CAM학회 논문집, v.22, no.2, pp.150 - 161, 2017-06 |
Iron Gall Ink Revisited: In Situ Oxidation of Fe(II)-Tannin Complex for Fluidic-Interface Engineering Lee, Hojae; Kim, Won Il; Youn, Wongu; Park, Taegyun; Lee, Sangmin; Kim, Taek-Soo; Mano, João F.; et al, ADVANCED MATERIALS, v.30, no.49, pp.1805091, 2018-12 |
Irradiation methods for engineering of graphene related two-dimensional materials Tung, Tran Thanh; Pereira, Ana L. C.; Poloni, Erik; Dang, Minh Nhat; Wang, James; Le, Truong-Son Dinh; Kim, Young-Jin; et al, APPLIED PHYSICS REVIEWS, v.10, no.3, 2023-09 |
Discover