Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 2821 to 2880 of 12481

2821
Design of Shoes Utilizing Torsion Spring for Increasing Gait Efficiency and Application in Wearable Robot

Song, E; Lee, D; Kong, Kyoungchul, Journal of Institute of Control, Robotics and Systems, v.27, no.3, pp.262 - 270, 2021-03

2822
Design of silencer using resonator arrays with high sound pressure and grazing flow

Seo, Sang-Hyeon; Kim, Yang-Hann; Kim, Kwang-Joon, APPLIED ACOUSTICS, v.138, pp.188 - 198, 2018-09

2823
Design of Star-Shaped Trimer Acceptors for High-Performance (Efficiency > 19%), Photostable, and Mechanically Robust Organic Solar Cells

Lee, Jin-Woo; Sun, Cheng; Lee, Jinho; Kim, Dong Jun; Kang, Won Jung; Lee, Seungbok; Kim, Donguk; et al, ADVANCED ENERGY MATERIALS, v.14, no.8, 2024-02

2824
Design of the centrifugal fan of a belt-driven starter generator with reduced flow noise

Kim, Seung Joong; Sung, Hyung Jin; Wallin, Stefan; Johansson, Arne V., INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.76, pp.72 - 84, 2019-04

2825
Design of the composite sandwich panel of the hot pad for the bonding of large area adhesive films

Yoon, Soon-Ho; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.94, no.1, pp.102 - 113, 2011-12

2826
Design of the compressor-assisted LNG fuel gas supply system

Park, Hyunjun; Lee, Sanghuk; Jeong, Jin-yeong; Chang, Daejun, ENERGY, v.158, pp.1017 - 1027, 2018-09

2827
Design of the Cross Section Shape of an Aluminum Crash Box for Crashworthiness Enhancement of a Car

Kim, S.B; Huh, H.; Lee, G.H.; Yoo, J.S.; Lee, M.Y., Modern Physics Letters B, 2008

2828
DESIGN OF THE CROSS SECTION SHAPE OF AN ALUMINUM CRASH BOX FOR CRASHWORTHINESS ENHANCEMENT OF A CAR

Kim, Seok Bong; Huh, Hoon; Lee, GH; Yoo, JS; Lee, MY, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.31-32, pp.5578 - 5583, 2008-12

2829
Design of the Dexterous Manipulator for Minimally Invasive Surgery

Lee, Jungju, INTERNATIONAL JOURNAL OF HUMAN-FRIENDLY WELFARE ROBOTIC SYSTEMS, v.5, no.2, pp.24 - 29, 2004-06

2830
Design of the hybrid composite face with electromagnetic wave transmission characteristics of low-observable radomes

Choi, Il-Beom; Kim, Jin-Gyu; Seo, Il-Sung; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.94, no.11, pp.3394 - 3400, 2012-11

2831
Design of the hybrid composite journal bearing assembled by interference fit

Kim, Seong Su; Lee, Dai Gil, COMPOSITE STRUCTURES, v.75, no.1-4, pp.222 - 230, 2006-09

2832
Design of the locomotive mechanism by analysis on behavior of pill bugs for a small robot

Paark, Jongwon; Kim, Hong-Jin; Kim, Young Kook; Kim, Soohyun, Journal of Institute of Control, v.18, no.2, pp.81 - 86, 2012-02

2833
Design of the Solenoid Valve of an Antilock Braking System With Reduced Flow Noise

Kim, SeungJoong; Sung, Hyung Jin, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, v.140, no.3, 2018-03

2834
Design of the Steering Feedback Controller of a Steer-by-Wire System Using Admittance Model

Choi, Hyungjeen; Choi, Seibum B, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.25, no.3, pp.565 - 574, 2024-06

2835
Design of TR-EFPI Fiber Optic Pressure Sensor for the Medical Application

권동수; 이정주, INTERNATIONAL JOURNAL OF HUMAN-FRIENDLY WELFARE ROBOTIC SYSTEMS, v.3, no.2, pp.2 - 7, 2002-06

2836
Design of ultrathin OLEDs having oxide -based transparent electrodes and encapsulation with sub -mm bending radius

Kim, Eungjun; Kwon, Jeonghyun; Kim, Cheolgyu; Kim, Taek-Soo; Choi, Kyung Cheol; Yoo, Seunghyup, ORGANIC ELECTRONICS, v.82, 2020-07

2837
Design of unknown disturbance and current observer for electric motor systems

Lee, Myeongseok; Jung, Kyungmo; Kong, Kyoungchul, Journal of Institute of Control, Robotics and Systems, v.21, no.7, pp.615 - 620, 2015-07

2838
Design optimization and development of linear brushless permanent magnet motor

M.J.Chung; Dae Gab Gweon, INTERNATIONAL JOURNAL OF CONTROL, AUTOMATION, AND SYSTEMS , v.1, no.3, pp.351 - 357, 2003-09

2839
Design optimization for an SOI MOEMS accelerometer

Teo, Adrian J. T.; Li, Holden King-Ho; Tan, Say Hwa; Yoon, Yong-Jin, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, v.24, no.1, pp.465 - 472, 2018-01

2840
Design Optimization of a Soft Robotic Rehabilitation Glove Based on Finger Workspace Analysis

Lee, Yechan; Park, Hyung-Soon, BIOMIMETICS, v.9, no.3, 2024-03

2841
Design optimization of extruded preform for hydroforming processes based on ideal forming design theory

Yoon, Jeong Whan; Chung, Kwansoo; Pourboghrat, Farhang; Barlat, Frederic, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.48, no.12, pp.1416 - 1428, 2006-12

2842
Design optimization of piezoelectric energy harvester subject to tip excitation

Park, Juil; Lee, Soobum; Kwak, Byung Man, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.26, no.1, pp.137 - 143, 2012-01

2843
Design Optimization of the Interim Support of the ITER Lower Cryostat Thermal Shield Using a Metamodel

Noh, Chang Hyun; Chung, W.; Lim, Jong-Min; Lee, Byung-Chai, IEEE TRANSACTIONS ON PLASMA SCIENCE, v.44, no.9, pp.1684 - 1688, 2016-09

2844
Design Point Optimization of an Axial-Flow Compressor Stage

Jin Shik Lim; Chung, Myung Kyoon, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.10, no.1, pp.48 - 58, 1989-03

2845
Design sensitivity analysis for transient response of non-viscously damped dynamic systems

Yun, Kyeong-Soo; Youn, Sung-Kie, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.55, no.6, pp.2197 - 2210, 2017-06

2846
Design sensitivity analysis of acoustical damping and its application to design of musical bells

Yu, Yonggyun; Kwak, Byung Man, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.44, no.3, pp.421 - 430, 2011-09

2847
Design sensitivity analysis of sheet metal forming processes with a direct differentiation method

Kim, Se-Ho; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.130, no.14, pp.504 - 510, 2002-12

2848
Design Sensitivity Method for Sampling-Based RBDO With Varying Standard Deviation

Cho, Hyunkyoo; Choi, K. K; Lee, IkJin; Lamb, David, JOURNAL OF MECHANICAL DESIGN, v.138, no.1, 2016-01

2849
Design space optimization using a numerical design continuation method

Kim, YI; Kwak, Byung Man, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.53, no.8, pp.1979 - 2002, 2002-03

2850
Design space optimization using design space adjustment and refinement

Jang, In Gwun; Kwak, Byung Man, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.35, pp.41 - 54, 2008-01

2851
Design, Construction and Use of a Displacement Gage for M(T) Specimens

chung-youb kim; ji-ho song, 대한기계학회논문집 A, v.26, no.3, pp.415 - 427, 2002

2852
Design, Fabrication, and Characterization of Liquid Metal Microheaters

Je, Jinsol; Lee, Jungchul, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, v.23, no.5, pp.1156 - 1163, 2014-10

2853
Design, simulation, and testing of a magnetorheological fluid-based haptic actuator for mobile applications

Ryu, Semin; Koo, Jeong-Hoi; Yang, Tae-Heon; Pyo, Dongbum; Kyung, Ki-Uk; Kwon, Dong-Soo, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.26, no.13, pp.1670 - 1678, 2015-09

2854
Designing an Adhesive Pillar Shape with Deep Learning-Based Optimization

Kim, Yongtae; Yang, Charles; Kim, Youngsoo; Gu, Grace X.; Ryu, Seunghwa, ACS APPLIED MATERIALS & INTERFACES, v.12, no.21, pp.24458 - 24465, 2020-05

2855
Designing Anthropomorphic Robot Hand with Active Dual-Mode Twisted String Actuation Mechanism and Tiny Tension Sensors

Jeong, Seok Hwan; Kim, Kyung-Soo; Kim, Soohyun, IEEE ROBOTICS AND AUTOMATION LETTERS, v.2, no.3, pp.1571 - 1578, 2017-07

2856
Designing center error control in optical disc drive systems

Kim, Kyung-Soo; Hong, SP, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, v.40, pp.1747 - 1748, 2001

2857
Designing directional adhesive pillars using deep learning-based optimization, 3D printing, and testing

Kim, Yongtae; Yeo, Jinwook; Park, Kundo; Destree, Aymeric; Qin, Zhao; Ryu, Seunghwa, MECHANICS OF MATERIALS, v.185, 2023-10

2858
Designing robust sliding hyperplanes for parametric uncertain systems: a Riccati approach

Park, Youngjin; Oh, S.-H; Kim, Kyung-Soo, AUTOMATICA, v.36, no.7, pp.1041 - 1048, 2000-07

2859
Designing staggered platelet composite structure with Gaussian process regression based Bayesian optimization

Park, Kundo; Kim, Youngsoo; Kim, Minki; Song, Chihyeon; Park, Jinkyoo; Ryu, Seunghwa, COMPOSITES SCIENCE AND TECHNOLOGY, v.220, 2022-03

2860
Designing tough isotropic structural composite using computation, 3D printing and testing

Kim, Yongtae; Kim, Youngsoo; Libonati, Flavia; Ryu, Seunghwa, COMPOSITES PART B-ENGINEERING, v.167, pp.736 - 745, 2019-06

2861
Designing whispering gallery modes via transformation optics

Kim, Yushin; Lee, Soo-Young; Ryu, Jung-Wan; Kim, Inbo; Han, Jae-Hyung; Tae, Heung-Sik; Choi, Muhan; et al, NATURE PHOTONICS, v.10, no.10, pp.647 - 652, 2016-10

2862
Desolvation-Triggered Versatile Transfer-Printing of Pure BN Films with Thermal-Optical Dual Functionality

Han, Yujin; Han, Hyeuk Jin; Rah, Yoonhyuk; Kim, Cheolgyu; Kim, Moohyum; Lim, Hunhee; Ahn, Kwang Ho; et al, ADVANCED MATERIALS, v.32, no.38, pp.2002099, 2020-09

2863
Detailed Characterization of Morphology and Dimensions of Diesel Particulates via Thermophoretic Sampling

Bae, Choongsik, SAE INTERNATIONAL FUEL & LUBRICANTS MEETING, SAN ANTONIO, 2001-09

2864
DETAILED EVALUATION OF METHODS FOR ESTIMATION OF FATIGUE PROPERTIES

Song, Ji-Ho; Park, Jun-Hyub, INTERNATIONAL JOURNAL OF FATIGUE, v.17, no.5, pp.365 - 373, 1995

2865
Detailed parametric study of Casimir forces in the Casimir Polder approximation for nontrivial 3D geometries

Sedmik, R; Vasiljevich, I; Tajmar, Martin, JOURNAL OF COMPUTER-AIDED MATERIALS DESIGN, v.14, no.1, pp.119 - 132, 2007-04

2866
DETECTION OF CUTTING-TOOL FRACTURE BY DUAL SIGNAL MEASUREMENTS

YOUN, JW; Yang, Min-Yang; PARK, HY, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.34, no.4, pp.507 - 525, 1994-05

2867
Detection of frequency-dependent endothelial response to oscillatory shear stress using a microfluidic transcellular monitor

Sei, Yoshitaka J.; Ahn, Song Ih; Virtue, Theodore; Kim, Taeyoung; Kim, YongTae, SCIENTIFIC REPORTS, v.7, 2017-08

2868
Detection of Graphene Cracks By Electromagnetic Induction, Insensitive to Doping Level

Yoon, Taeshik; Kang, Sumin; Kang, Tae Yeob; Kim, Taek-Soo, CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, v.120, no.2, pp.351 - 361, 2019-08

2869
Detection of Korotkoff Sounds Using Wavelet Transform and CNN

Lee, Bomi; Min, Changhee; Jeong, Jae-Hak; Hong, Junki; Park, Yong-Hwa, TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, v.47, no.8, pp.423 - 427, 2023-08

2870
Detection of Metal Defects on Gas Distribution Pipeline by Remote Field Eddy Current(RFEC) using Finite-Element Analysis

Yoon, Yong-San, OIL & GAS SCIENCE AND TECHNOLOGY-REVUE DE L INSTITUT FRANCAIS DU PETROLE, v.56, no.2, pp.161 - 179, 2001-03

2871
DETECTION OF RIGID STRUCTURE IN ENUMERATING BASIC KINEMATIC CHAIN BY SEQUENTIAL REMOVAL OF BINARY LINK STRING

LEE, HJ; Yoon, Yong-San, JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY, v.35, no.4, pp.647 - 651, 1992-12

2872
Detection of thiocholine ions with cobalt phthalocyanine mediated screen printed electrode

Er, Jie-Kai; Ng, Sum Huan; Li, King Ho Holden; Shin, Choongsoo S.; Su, Pei-Chen; Tay, Nam Beng; Wang, Wei; et al, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.15, no.12, pp.2573 - 2579, 2014-12

2873
Detection of volatile organic compounds as markers of chicken breast spoilage using HS-SPME-GC/MS-FASST

Miks-Krajnik, Marta; Yoon, Yong-Jin; Yuk, Hyun-Gyun, FOOD SCIENCE AND BIOTECHNOLOGY, v.24, no.1, pp.361 - 372, 2015-02

2874
Detection of weld position and seam tracking based on Kalman filtering of weld pool images

Gao, XD; Na, Suck-Joo, JOURNAL OF MANUFACTURING SYSTEMS, v.24, no.1, pp.1 - 12, 2005

2875
Determination of 3-D weld seams in ship blocks using a laser vision sensor and a neural network

Yoo, WS; Na, Suck-Joo, JOURNAL OF MANUFACTURING SYSTEMS, v.22, no.4, pp.340 - 347, 2003-10

2876
Determination of a Dimensionless Equation for Shear Friction Factor in Cold Forging

Jung, KH; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.135, no.3, 2013-07

2877
Determination of a major design parameter for forward extrusion of spur gears

Song, JH; Im, Yong-Taek, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.126, no.2, pp.255 - 263, 2004-05

2878
Determination of absorption coefficient of nanofluids with unknown refractive index from reflection and transmission spectra

Kim, Joongbae; Lee, Seungyoon; Lee, Kyungeun; Lee, Ikjin; Lee, Bong Jae, JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER, v.213, pp.107 - 112, 2018-07

2879
Determination of appropriate level of detail of a three-dimensional computer-aided design model from a permissible dissimilarity for fully automated simplification

Kwon, Soonjo; Kim, Hyungki; Mun, Duhwan; Han, Soonhung, ADVANCES IN MECHANICAL ENGINEERING, v.9, no.7, 2017-07

2880
Determination of cohesive parameters for a mixed-mode cohesive zone model

Lee, Min Jung; Cho, Tae Min; Kim, Won Seock; Lee, Byung Chai; Lee, Jung Ju, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, v.30, no.5, pp.322 - 328, 2010-07

rss_1.0 rss_2.0 atom_1.0