Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 2641 to 2700 of 12271
Design and Evaluation of Enhanced Mock Circulatory Platform Simulating Cardiovascular Physiology for Medical Palpation Training Jeong, Jae-Hak; Kim, Young-Min; Lee, Bomi; Hong, Junki; Kim, Jaeuk; Woo, Sam-Yong; Yang, Tae-Heon; et al, APPLIED SCIENCES-BASEL, v.10, no.16, pp.5433, 2020-08 |
| Design and Evaluation of Passive Shoulder Joint Tracking Module for Upper-Limb Rehabilitation Robots Lee, Kyoung-Soub; Park, Jeongho; Beom, Jaewon; Park, Hyung-Soon, FRONTIERS IN NEUROROBOTICS, v.12, 2018-07 |
| Design and Evaluation of the Unmanned Technology Research Center Exoskeleton Implementing the Precedence Walking Assistance Mechanism Cha, Dowan; Oh, Sung Nam; Lee, Hee Hwan; Kim, Kyung-Soo; Il Kim, Kab; Kim, Soohyun, JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, v.10, no.6, pp.2376 - 2383, 2015-11 |
| Design and evaluation of two dimensional metrological atomic force microscope using a planar nanoscanner Lee D.-Y.; Kim D.-M.; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.45, no.3B, pp.2124 - 2127, 2006 |
| Design and experimental implementation of longitudinal control for a platoon of automated vehicles Rajamani, R; Choi, Seibum B; Law, BK; Hedrick, JK; Prohaska, R; Kretz, P, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.122, no.3, pp.470 - 476, 2000-09 |
| Design and experimental investigation of composite squirrel cage rotor with temperature effects Kim, JM; Lee, Dai Gil; Chang, SH; Oh, SH; Jeon, HS, COMPOSITE STRUCTURES, v.57, no.1-4, pp.337 - 344, 2002-09 |
| DESIGN AND EXPERIMENTAL VALIDATION OF A CONTROL SYSTEM FOR DYNAMIC POSITIONING OF A SHUTTLE TANKER Kim, Young-Shik; Hong, Jang-Pyo; Kim, Yun-Ho; Sung, Hong-Gun; Kim, Jinwhan, TRANSACTIONS OF FAMENA, v.45, no.3, pp.63 - 85, 2021-12 |
| Design and fabrication of a flexural plate wave accelerometer Lee, J.S.; Kim, Y.C.; Lee, W.S.; Lee, Seung Seob, KEY ENGINEERING MATERIALS, v.326-328 I, no.0, pp.241 - 244, 2006 |
| Design and fabrication of a lorentz force driven micro indenter Hong, J.S.; Hong, J.W.; Song, S.; Shin, Jennifer Hyunjong, JOURNAL OF BIOMECHANICAL SCIENCE AND ENGINEERING, v.6, no.3, pp.183 - 190, 2011-02 |
| Design and Fabrication of a Multi-modal Confocal Endo-Microscope for Biomedical Imaging Kim, Young-Duk; Ahn, Myoung-Ki; Gweon, Dae-Gab, JOURNAL OF THE OPTICAL SOCIETY OF KOREA, v.15, no.3, pp.300 - 304, 2011-09 |
| Design and fabrication of an optical probe with a phase filter for extended depth of focus Xing, Jingchao; Kim, Junyoung; Yoo, Hongki, OPTICS EXPRESS, v.24, no.2, pp.1037 - 1044, 2016-01 |
| Design and fabrication of planar multilayer structures with coherent thermal emission characteristics Lee, Bong Jae; Zhang, Z. M., JOURNAL OF APPLIED PHYSICS, v.100, no.6, 2006-09 |
| Design and finite volume evaluation of a counterflow recuperative spiral heat exchanger for additive manufacturing Busch, Bastian; Caughley, Alan; Glasson, Neil; Badcock, Rodney A; Weijers, Hubertus W; Lumsden, Grant; Gschwendtner, Michael; et al, CRYOGENICS, v.127, 2022-10 |
| Design and Implementation of a Novel Interior Permanent Magnet Bearingless Slice Motor Weinreb, Benjamin S.; Noh, Minkyun; Fyler, Donald C.; Trumper, David L., IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, v.57, no.6, pp.6774 - 6782, 2021-11 |
| Design and locomotion control of a hydraulic lower extremity exoskeleton for mobility augmentation Kim, Hong Chul; Shin, Young June; Kim, Jung, MECHATRONICS, v.46, pp.32 - 45, 2017-10 |
| Design and manufacture of a carbon fiber epoxy rotating boring bar Lee, Dai Gil; Hwang, HY; Kim, JK, COMPOSITE STRUCTURES, v.60, no.1, pp.115 - 124, 2003-04 |
| Design and manufacture of a three-axis ultra-precision CNC grinding machine Kim, HS; Jeong, KS; Lee, Dai Gil, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.71, no.2, pp.258 - 266, 1997 |
| Design and manufacture of an aerostatic spindle bearing system with carbon fiber-epoxy composites Lee, Dai Gil; Choi, JK, JOURNAL OF COMPOSITE MATERIALS, v.34, no.14, pp.1150 - 1175, 2000 |
| Design and manufacture of an automotive hybrid aluminum/composite drive shaft Lee, Dai Gil; Kim, HS; Kim, JW; Kim, JK, COMPOSITE STRUCTURES, v.63, no.1, pp.87 - 99, 2004-01 |
| Design and manufacture of composite high speed machine tool structures Lee, DG; Lee, Dai Gil; Kim, HS; Kim, JM, COMPOSITES SCIENCE AND TECHNOLOGY, v.64, no.10-11, pp.1523 - 1530, 2004-08 |
| Design and manufacture of hybrid polymer concrete bed for high-speed CNC milling machine Suh J.D.; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.4, no.2, pp.113 - 121, 2008-06 |
| Design and manufacture of stainless steel/carbon epoxy hybrid shaft for cleaning large LCD glass panels Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.80, no.2, pp.279 - 289, 2007-09 |
| DESIGN AND MANUFACTURE OF THE COMPOSITE FLEXSPLINE OF A HARMONIC DRIVE WITH ADHESIVE JOINING OH, HS; JEONG, KS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.28, no.3, pp.307 - 314, 1994-01 |
| Design and Modeling of a Clutch Actuator System With Self-Energizing Mechanism Kim, Jin-Sung; Choi, Seibum B, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.16, no.5, pp.953 - 966, 2011-10 |
| Design and modeling of semi-active squeeze film dampers using magneto-rheological fluids Kim, Keun-Joo; Lee, Chong-Won; Koo, Jeong-Hoi, SMART MATERIALS & STRUCTURES, v.17, no.3, 2008-06 |
| Design and optimisation of one-port RF MEMS resonators and related integrated circuits using ANN-based macromodelling approach Lee, Y.; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, IEE PROCEEDINGS: CIRCUITS, DEVICES AND SYSTEMS, v.153, no.5, pp.480 - 488, 2006-10 |
| Design and optimisation of variable geometry single-tracked vehicle for climbing stairs Park, Dong Il; Lim, Sung-Kyun; Kwak, Yoon Keun, INTERNATIONAL JOURNAL OF VEHICLE DESIGN, v.43, no.1-4, pp.221 - 236, 2007 |
| Design and Optimization of Long Stroke Planar Motion Maglev Stage using Copper Strip Array Woo, Siwoong; Gweon, Dae-Gab, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.3, pp.479 - 485, 2015-03 |
| Design and optimization of RF ICs with embedded linear macromodels of multiport MEMS devices Lee, Yong Jae; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, v.17, no.2, pp.196 - 209, 2007-03 |
| Design and optimization of voice coil actuator for six degree of freedom active vibration isolation system using Halbach magnet array Kim, Myeong-Hyeon; Kim, Hyun-Chang; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.83, no.10, 2012-10 |
| Design and optimization of voice coil motor for application in active vibration isolation Banik, Rahul; Gweon, Dae-Gab, SENSORS AND ACTUATORS A-PHYSICAL, v.137, no.2, pp.236 - 243, 2007-07 |
| Design and orthogonality correction of a planar scanner for an atomic force microscope Lee, D.-Y.; Gweon, Dae-Gab, KEY ENGINEERING MATERIALS, v.326-328 I, pp.401 - 404, 2006 |
| Design and performance analysis of a 500-W heat source for radioisotope thermophotovoltaic converters Cheon, Seong Jae; Hong, Ser Gi; Lee, Jung Hun; Nam, Young Suk, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.42, no.2, pp.817 - 829, 2018-02 |
| Design and Performance Evaluation of an Electro-Hydraulic Camless Engine Valve Actuator for Future Vehicle Applications Nam, Kanghyun; Cho, Kwanghyun; Park, Sang-Shin; Choi, Seibum B., SENSORS, v.17, no.12, 2017-12 |
| Design and Preliminary Results of Novel Situational Awareness Systemfor Autonomous Ship based on Artificial Intelligence Techniques 최현택; 박정홍; 최진우; 강민주; 이영준; 정종대; 김종휘; et al, Journal of Institute of Control, Robotics and Systems, v.27, no.8, pp.556 - 564, 2021-08 |
| Design and test of an adaptive vibration absorber based on magnetorheological elastomers and a hybrid electromagnet Sinko, Robert; Karnes, Michael; Koo, Jeong-Hoi; Kim, Young-Keun; Kim, Kyung-Soo, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.24, no.7, pp.803 - 812, 2013-05 |
| Design and Validation of Automated Femoral Bone Morphology Measurements in Cerebral Palsy Park, Noyeol; Lee, Jehee; Sung, Ki Hyuk; Park, Moon Seok; Koo, Seungbum, JOURNAL OF DIGITAL IMAGING, v.27, no.2, pp.262 - 269, 2014-04 |
| Design consideration for cross jet air mixing in municipal solid waste incinerators Ryu, CK; Choi, Sangmin, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.21, no.8, pp.695 - 706, 1997-06 |
| Design Considerations for a Hyper-Redundant Pulleyless Rolling Joint With Elastic Fixtures Suh, Jung-Wook; Kim, Ki-young; Jeong, Ju Won; Lee, Jung-Ju, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.6, pp.2841 - 2852, 2015-12 |
| Design for shared autonomous vehicle (SAV) system employing electrified vehicles: Comparison of battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) Lee, Ungki; Jeon, Sunghyun; Lee, Ikjin, Cleaner Engineering and Technology, v.8, 2022-06 |
| Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution Lee, JH; Son, IH; Im, Yong-Taek; Chon, SH; Park, Joong Keun, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.191, no.1-3, pp.39 - 43, 2007-08 |
| Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution Im, Y.T.; Lee, J.H; Son, I.H.; Chon, S.H.; Park, J.K., Journal of Materials Processing Technology, Vol.191, pp.39-43, 2007-08 |
| Design improvement of the three-beam detector towards a precise long-range 6-degree of freedom motion sensor system Kim, Young Keun; Jang, In Gwun; Kim, Kyung-Soo; Kim, Soohyun, REVIEW OF SCIENTIFIC INSTRUMENTS, v.85, no.1, 2014-01 |
| Design method of the layered active magnetic regenerator (AMR) for hydrogen liquefaction by numerical simulation Park, Inmyong; Kim, Youngkwon; Park, Jiho; Jeong, Sangkwon, CRYOGENICS, v.70, pp.57 - 64, 2015-09 |
| Design methods for six-degree-of-freedom displacement measurement systems using cooperative targets Kim, Jong-Ahn; Bae, Eui Won; Kim, Soohyun; Kwak, Yoon Keun, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, v.26, no.1, pp.99 - 104, 2002-01 |
| Design modification in a multi-stage rectangular cup drawing process with a large aspect ratio by an elasto-plastic finite element analysis Kim, Se-Ho; Kim, Seung-Ho; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.766 - 773, 2001-06 |
| Design observable model of direct drive motor for air gap estimation when input disturbance is impulse signal Ki, Taeseok; Park, Youn-sik; Park, Youngjin, Journal of Institute of Control, v.18, no.7, pp.627 - 631, 2012-07 |
| Design of a bidirectional actuator for a nanopositioning system with a permanent magnet and an electromagnet Kim, KH; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.76, no.12, 2005-12 |
| Design of a Broadband Solar Thermal Absorber Using a Deep Neural Network and Experimental Demonstration of Its Performance Seo, Junyong; Jung, Pil-Hoon; Kim, Mingeon; Yang, Sounghyeok; Lee, Ikjin; Lee, Jungchul; Lee, Heon; et al, SCIENTIFIC REPORTS, v.9, no.1, 2019-10 |
| Design of a cat-inspired robotic leg for fast running Park, Jongwon; Kim, Kyung-Soo; Kim, Soo-Hyun, ADVANCED ROBOTICS, v.28, no.23, pp.1587 - 1598, 2014-12 |
| Design of a CMAC Controller for hydro-Forming Process Cho, Hyung-Suck, J. KSME, 1996-01 |
| Design of a Compact Embedded Hydraulic Power Unit for Bipedal Robots Cho, Buyoun; Kim, Min-Su; Kim, Sung-Woo; Shin, Seunghoon; Jeong, Yeseong; Oh, Jun-Ho; Park, Hae-Won, IEEE ROBOTICS AND AUTOMATION LETTERS, v.6, no.2, pp.3631 - 3638, 2021-04 |
| Design of a compact omnidirectional sound camera using the three-dimensional acoustic intensimetry Jung, In-Jee; Ih, Jeong-Guon, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.172, 2022-06 |
| Design of a Compact Pneumatic Power Generator With a Self-Regulating Mechanism for Mobile Application Kim, Kyung Rok; Hong, Yun-Pyo; Kim, Kyung-Soo; Kim, Soohyun, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.22, no.5, pp.1983 - 1991, 2017-10 |
| DESIGN OF A COMPRESSOR-POWER-BASED EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR DIESEL ENGINE AIR MANAGEMENT Jin, H.; Choi, Seibum B; Kim, S., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.15, no.2, pp.191 - 201, 2014-03 |
| Design of a Cylindrical Flexure Jointed Stewart Platform for Aligning the Condenser in an X-ray Microscope Sung-hoon Kang; Dong Woo Kang; Dae Gab Gweon; Gwon-Ha Yoon; Jin Young Min, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.7, no.3, pp.60 - 65, 2006-07 |
| Design of a deflected membrane electrode assembly for PEMFCs Ahmed, Dewan Hasan; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.51, pp.5443 - 5453, 2008-10 |
| Design of a Direct-Driven Linear Actuator for a High-Speed Quadruped Robot, Cheetaroid-I Na, Byeonghun; Choi, Hyunjin; Kong, Kyoungchul, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.2, pp.924 - 933, 2015-04 |
| Design of a force reflection controller for telerobot systems using neural network and fuzzy logic Cha, D.H; Cho, Hyungsuck, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, v.16, no.1, pp.1 - 24, 1996 |
| Design of a Fuel-Cell-Powered Catamaran-Type Unmanned Surface Vehicle Sohn, Seok-In; Oh, Jung Hwan; Lee, Yeon Seung; Park, Dae-Hwan; Oh, Il-Kwon, IEEE JOURNAL OF OCEANIC ENGINEERING, v.40, no.2, pp.388 - 396, 2015-04 |
Discover
Open Access
Date issued
- 4,098 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989