Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article
Showing results 2641 to 2700 of 12294
| Design and evaluation of a slave manipulator with roll-pitch-roll wrist and automatic tool loading mechanism in telerobotic surgery Kim, Ki-Young; Lee, Jung-Ju, INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY, v.8, no.4, pp.421 - 435, 2012-12 |
| Design and Evaluation of a Teleoperated Surgical Manipulator with an Additional Degree of Freedom for Laparoscopic Surgery Kim, Ki-Young; Song, Ho-Seok; Park, Suk-Hoon; Lee, Jung-Ju; Yoon, Yong-San, ADVANCED ROBOTICS, v.24, no.12, pp.1695 - 1718, 2010-09 |
Design and Evaluation of Enhanced Mock Circulatory Platform Simulating Cardiovascular Physiology for Medical Palpation Training Jeong, Jae-Hak; Kim, Young-Min; Lee, Bomi; Hong, Junki; Kim, Jaeuk; Woo, Sam-Yong; Yang, Tae-Heon; et al, APPLIED SCIENCES-BASEL, v.10, no.16, pp.5433, 2020-08 |
| Design and Evaluation of Passive Shoulder Joint Tracking Module for Upper-Limb Rehabilitation Robots Lee, Kyoung-Soub; Park, Jeongho; Beom, Jaewon; Park, Hyung-Soon, FRONTIERS IN NEUROROBOTICS, v.12, 2018-07 |
| Design and Evaluation of the Unmanned Technology Research Center Exoskeleton Implementing the Precedence Walking Assistance Mechanism Cha, Dowan; Oh, Sung Nam; Lee, Hee Hwan; Kim, Kyung-Soo; Il Kim, Kab; Kim, Soohyun, JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, v.10, no.6, pp.2376 - 2383, 2015-11 |
| Design and evaluation of two dimensional metrological atomic force microscope using a planar nanoscanner Lee D.-Y.; Kim D.-M.; Gweon, Dae-Gab, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, v.45, no.3B, pp.2124 - 2127, 2006 |
| Design and experimental implementation of longitudinal control for a platoon of automated vehicles Rajamani, R; Choi, Seibum B; Law, BK; Hedrick, JK; Prohaska, R; Kretz, P, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, v.122, no.3, pp.470 - 476, 2000-09 |
| Design and experimental investigation of composite squirrel cage rotor with temperature effects Kim, JM; Lee, Dai Gil; Chang, SH; Oh, SH; Jeon, HS, COMPOSITE STRUCTURES, v.57, no.1-4, pp.337 - 344, 2002-09 |
| DESIGN AND EXPERIMENTAL VALIDATION OF A CONTROL SYSTEM FOR DYNAMIC POSITIONING OF A SHUTTLE TANKER Kim, Young-Shik; Hong, Jang-Pyo; Kim, Yun-Ho; Sung, Hong-Gun; Kim, Jinwhan, TRANSACTIONS OF FAMENA, v.45, no.3, pp.63 - 85, 2021-12 |
| Design and fabrication of a flexural plate wave accelerometer Lee, J.S.; Kim, Y.C.; Lee, W.S.; Lee, Seung Seob, KEY ENGINEERING MATERIALS, v.326-328 I, no.0, pp.241 - 244, 2006 |
| Design and fabrication of a lorentz force driven micro indenter Hong, J.S.; Hong, J.W.; Song, S.; Shin, Jennifer Hyunjong, JOURNAL OF BIOMECHANICAL SCIENCE AND ENGINEERING, v.6, no.3, pp.183 - 190, 2011-02 |
| Design and Fabrication of a Multi-modal Confocal Endo-Microscope for Biomedical Imaging Kim, Young-Duk; Ahn, Myoung-Ki; Gweon, Dae-Gab, JOURNAL OF THE OPTICAL SOCIETY OF KOREA, v.15, no.3, pp.300 - 304, 2011-09 |
| Design and fabrication of an optical probe with a phase filter for extended depth of focus Xing, Jingchao; Kim, Junyoung; Yoo, Hongki, OPTICS EXPRESS, v.24, no.2, pp.1037 - 1044, 2016-01 |
| Design and fabrication of planar multilayer structures with coherent thermal emission characteristics Lee, Bong Jae; Zhang, Z. M., JOURNAL OF APPLIED PHYSICS, v.100, no.6, 2006-09 |
| Design and finite volume evaluation of a counterflow recuperative spiral heat exchanger for additive manufacturing Busch, Bastian; Caughley, Alan; Glasson, Neil; Badcock, Rodney A; Weijers, Hubertus W; Lumsden, Grant; Gschwendtner, Michael; et al, CRYOGENICS, v.127, 2022-10 |
| Design and Implementation of a Novel Interior Permanent Magnet Bearingless Slice Motor Weinreb, Benjamin S.; Noh, Minkyun; Fyler, Donald C.; Trumper, David L., IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, v.57, no.6, pp.6774 - 6782, 2021-11 |
| Design and locomotion control of a hydraulic lower extremity exoskeleton for mobility augmentation Kim, Hong Chul; Shin, Young June; Kim, Jung, MECHATRONICS, v.46, pp.32 - 45, 2017-10 |
| Design and manufacture of a carbon fiber epoxy rotating boring bar Lee, Dai Gil; Hwang, HY; Kim, JK, COMPOSITE STRUCTURES, v.60, no.1, pp.115 - 124, 2003-04 |
| Design and manufacture of a three-axis ultra-precision CNC grinding machine Kim, HS; Jeong, KS; Lee, Dai Gil, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.71, no.2, pp.258 - 266, 1997 |
| Design and manufacture of an aerostatic spindle bearing system with carbon fiber-epoxy composites Lee, Dai Gil; Choi, JK, JOURNAL OF COMPOSITE MATERIALS, v.34, no.14, pp.1150 - 1175, 2000 |
| Design and manufacture of an automotive hybrid aluminum/composite drive shaft Lee, Dai Gil; Kim, HS; Kim, JW; Kim, JK, COMPOSITE STRUCTURES, v.63, no.1, pp.87 - 99, 2004-01 |
| Design and manufacture of composite high speed machine tool structures Lee, DG; Lee, Dai Gil; Kim, HS; Kim, JM, COMPOSITES SCIENCE AND TECHNOLOGY, v.64, no.10-11, pp.1523 - 1530, 2004-08 |
| Design and manufacture of hybrid polymer concrete bed for high-speed CNC milling machine Suh J.D.; Lee, Dai Gil, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, v.4, no.2, pp.113 - 121, 2008-06 |
| Design and manufacture of stainless steel/carbon epoxy hybrid shaft for cleaning large LCD glass panels Kim, HS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.80, no.2, pp.279 - 289, 2007-09 |
| DESIGN AND MANUFACTURE OF THE COMPOSITE FLEXSPLINE OF A HARMONIC DRIVE WITH ADHESIVE JOINING OH, HS; JEONG, KS; Lee, Dai Gil, COMPOSITE STRUCTURES, v.28, no.3, pp.307 - 314, 1994-01 |
| Design and Modeling of a Clutch Actuator System With Self-Energizing Mechanism Kim, Jin-Sung; Choi, Seibum B, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.16, no.5, pp.953 - 966, 2011-10 |
| Design and modeling of semi-active squeeze film dampers using magneto-rheological fluids Kim, Keun-Joo; Lee, Chong-Won; Koo, Jeong-Hoi, SMART MATERIALS & STRUCTURES, v.17, no.3, 2008-06 |
| Design and optimisation of one-port RF MEMS resonators and related integrated circuits using ANN-based macromodelling approach Lee, Y.; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, IEE PROCEEDINGS: CIRCUITS, DEVICES AND SYSTEMS, v.153, no.5, pp.480 - 488, 2006-10 |
| Design and optimisation of variable geometry single-tracked vehicle for climbing stairs Park, Dong Il; Lim, Sung-Kyun; Kwak, Yoon Keun, INTERNATIONAL JOURNAL OF VEHICLE DESIGN, v.43, no.1-4, pp.221 - 236, 2007 |
| Design and Optimization of Long Stroke Planar Motion Maglev Stage using Copper Strip Array Woo, Siwoong; Gweon, Dae-Gab, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.3, pp.479 - 485, 2015-03 |
| Design and optimization of RF ICs with embedded linear macromodels of multiport MEMS devices Lee, Yong Jae; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, v.17, no.2, pp.196 - 209, 2007-03 |
| Design and optimization of voice coil actuator for six degree of freedom active vibration isolation system using Halbach magnet array Kim, Myeong-Hyeon; Kim, Hyun-Chang; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.83, no.10, 2012-10 |
| Design and optimization of voice coil motor for application in active vibration isolation Banik, Rahul; Gweon, Dae-Gab, SENSORS AND ACTUATORS A-PHYSICAL, v.137, no.2, pp.236 - 243, 2007-07 |
| Design and orthogonality correction of a planar scanner for an atomic force microscope Lee, D.-Y.; Gweon, Dae-Gab, KEY ENGINEERING MATERIALS, v.326-328 I, pp.401 - 404, 2006 |
| Design and performance analysis of a 500-W heat source for radioisotope thermophotovoltaic converters Cheon, Seong Jae; Hong, Ser Gi; Lee, Jung Hun; Nam, Young Suk, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.42, no.2, pp.817 - 829, 2018-02 |
| Design and Performance Evaluation of an Electro-Hydraulic Camless Engine Valve Actuator for Future Vehicle Applications Nam, Kanghyun; Cho, Kwanghyun; Park, Sang-Shin; Choi, Seibum B., SENSORS, v.17, no.12, 2017-12 |
| Design and Preliminary Results of Novel Situational Awareness Systemfor Autonomous Ship based on Artificial Intelligence Techniques 최현택; 박정홍; 최진우; 강민주; 이영준; 정종대; 김종휘; et al, Journal of Institute of Control, Robotics and Systems, v.27, no.8, pp.556 - 564, 2021-08 |
| Design and test of an adaptive vibration absorber based on magnetorheological elastomers and a hybrid electromagnet Sinko, Robert; Karnes, Michael; Koo, Jeong-Hoi; Kim, Young-Keun; Kim, Kyung-Soo, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.24, no.7, pp.803 - 812, 2013-05 |
| Design and Validation of Automated Femoral Bone Morphology Measurements in Cerebral Palsy Park, Noyeol; Lee, Jehee; Sung, Ki Hyuk; Park, Moon Seok; Koo, Seungbum, JOURNAL OF DIGITAL IMAGING, v.27, no.2, pp.262 - 269, 2014-04 |
| Design consideration for cross jet air mixing in municipal solid waste incinerators Ryu, CK; Choi, Sangmin, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.21, no.8, pp.695 - 706, 1997-06 |
| Design Considerations for a Hyper-Redundant Pulleyless Rolling Joint With Elastic Fixtures Suh, Jung-Wook; Kim, Ki-young; Jeong, Ju Won; Lee, Jung-Ju, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.6, pp.2841 - 2852, 2015-12 |
| Design for shared autonomous vehicle (SAV) system employing electrified vehicles: Comparison of battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) Lee, Ungki; Jeon, Sunghyun; Lee, Ikjin, Cleaner Engineering and Technology, v.8, 2022-06 |
| Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution Lee, JH; Son, IH; Im, Yong-Taek; Chon, SH; Park, Joong Keun, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.191, no.1-3, pp.39 - 43, 2007-08 |
| Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution Im, Y.T.; Lee, J.H; Son, I.H.; Chon, S.H.; Park, J.K., Journal of Materials Processing Technology, Vol.191, pp.39-43, 2007-08 |
| Design improvement of the three-beam detector towards a precise long-range 6-degree of freedom motion sensor system Kim, Young Keun; Jang, In Gwun; Kim, Kyung-Soo; Kim, Soohyun, REVIEW OF SCIENTIFIC INSTRUMENTS, v.85, no.1, 2014-01 |
| Design method of the layered active magnetic regenerator (AMR) for hydrogen liquefaction by numerical simulation Park, Inmyong; Kim, Youngkwon; Park, Jiho; Jeong, Sangkwon, CRYOGENICS, v.70, pp.57 - 64, 2015-09 |
| Design methods for six-degree-of-freedom displacement measurement systems using cooperative targets Kim, Jong-Ahn; Bae, Eui Won; Kim, Soohyun; Kwak, Yoon Keun, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, v.26, no.1, pp.99 - 104, 2002-01 |
| Design modification in a multi-stage rectangular cup drawing process with a large aspect ratio by an elasto-plastic finite element analysis Kim, Se-Ho; Kim, Seung-Ho; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.766 - 773, 2001-06 |
| Design observable model of direct drive motor for air gap estimation when input disturbance is impulse signal Ki, Taeseok; Park, Youn-sik; Park, Youngjin, Journal of Institute of Control, v.18, no.7, pp.627 - 631, 2012-07 |
| Design of a bidirectional actuator for a nanopositioning system with a permanent magnet and an electromagnet Kim, KH; Gweon, Dae-Gab, REVIEW OF SCIENTIFIC INSTRUMENTS, v.76, no.12, 2005-12 |
| Design of a Broadband Solar Thermal Absorber Using a Deep Neural Network and Experimental Demonstration of Its Performance Seo, Junyong; Jung, Pil-Hoon; Kim, Mingeon; Yang, Sounghyeok; Lee, Ikjin; Lee, Jungchul; Lee, Heon; et al, SCIENTIFIC REPORTS, v.9, no.1, 2019-10 |
| Design of a cat-inspired robotic leg for fast running Park, Jongwon; Kim, Kyung-Soo; Kim, Soo-Hyun, ADVANCED ROBOTICS, v.28, no.23, pp.1587 - 1598, 2014-12 |
| Design of a CMAC Controller for hydro-Forming Process Cho, Hyung-Suck, J. KSME, 1996-01 |
| Design of a Compact Embedded Hydraulic Power Unit for Bipedal Robots Cho, Buyoun; Kim, Min-Su; Kim, Sung-Woo; Shin, Seunghoon; Jeong, Yeseong; Oh, Jun-Ho; Park, Hae-Won, IEEE ROBOTICS AND AUTOMATION LETTERS, v.6, no.2, pp.3631 - 3638, 2021-04 |
| Design of a compact omnidirectional sound camera using the three-dimensional acoustic intensimetry Jung, In-Jee; Ih, Jeong-Guon, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.172, 2022-06 |
| Design of a Compact Pneumatic Power Generator With a Self-Regulating Mechanism for Mobile Application Kim, Kyung Rok; Hong, Yun-Pyo; Kim, Kyung-Soo; Kim, Soohyun, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.22, no.5, pp.1983 - 1991, 2017-10 |
| DESIGN OF A COMPRESSOR-POWER-BASED EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR DIESEL ENGINE AIR MANAGEMENT Jin, H.; Choi, Seibum B; Kim, S., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.15, no.2, pp.191 - 201, 2014-03 |
| Design of a Cylindrical Flexure Jointed Stewart Platform for Aligning the Condenser in an X-ray Microscope Sung-hoon Kang; Dong Woo Kang; Dae Gab Gweon; Gwon-Ha Yoon; Jin Young Min, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.7, no.3, pp.60 - 65, 2006-07 |
| Design of a deflected membrane electrode assembly for PEMFCs Ahmed, Dewan Hasan; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.51, pp.5443 - 5453, 2008-10 |
| Design of a Direct-Driven Linear Actuator for a High-Speed Quadruped Robot, Cheetaroid-I Na, Byeonghun; Choi, Hyunjin; Kong, Kyoungchul, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.2, pp.924 - 933, 2015-04 |
Discover
Open Access
Date issued
- 4,102 2020 - 2024
- 12,341 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989