1561 | 유인원 로봇 시스템의 보행과 자세에 관한 연구 = (A) study on walking and posture for anthropoid robot systemlink 윤병호; 김수현; et al, 한국과학기술원, 2018 |
1562 | 유전 경화 모니터링을 이용한 후판 복합재료의 스마트 성형 기법 = Smart cure process for thick composites using dielectric cure monitoringlink 김형근; Kim, Hyoung-Geun; et al, 한국과학기술원, 2003 |
1563 | 유전자 알고리즘을 이용한 전체/다목적 최적화 알고리즘의 개발 = Development of a global/multicriteria optimization algorithm based on the genetic algorithmlink 이준배; Lee, Jun-Bae; et al, 한국과학기술원, 1996 |
1564 | 유전체 탄성중합체를 이용한 에너지 하베스팅 패드에 대한 연구 = A study on energy harvesting pad using dielectric elastomerlink 강경수; Kang, Gyung-Soo; et al, 한국과학기술원, 2011 |
1565 | 유체기계 흡/배기 소음원의 시변 및 비선형 특성에 관한 연구 = A study on the time-varying and nonlinear source characteristics of intake and exhaust systems in fluid machineslink 장승호; Jang, Seung-Ho; et al, 한국과학기술원, 2002 |
1566 | 유한 요소법을 이용한 변동하중하의 균열닫힘 예측에 관한 연구 = Study on prediction of crack closure under variable loading by finite element methodlink 박순조; Park, Soon-Jo; 엄윤용; 송지호; et al, 한국과학기술원, 1997 |
1567 | 유한시간 사이클을 이용한 저온열 증기 동력기관의 이론적 최적화 = Finite-time optimizations of low-grade vapor power cycle heat engineslink 이원용; Lee, Won-Yong; et al, 한국과학기술원, 1991 |
1568 | 유한요소 격자 개선과정을 통한 진동저감 구조형상의 최적화 연구 = Structural shape optimization for minimum vibration using grid improval processeslink 강구태; Kang, Koo-Tae; et al, 한국과학기술원, 1997 |
1569 | 유한요소 극한해석을 이용한 소성구조물의 위상최적화 = Topology optimization of plastic structures using finite element limit analysislink 이종섭; Lee, Jong-Sup; et al, 한국과학기술원, 2010 |
1570 | 유한요소 민감도해석을 이용한 박판금속성형에서의 공정변수 최적설계 = Optimum process design in sheet metal forming processes using finite element sensitivity analysislink 김세호; Kim, Se-Ho; et al, 한국과학기술원, 2002 |
1571 | 유한요소 시간이산화를 이용한 직접 적분법과 구조동역학에의 응용 = A direct integration methods using finite element time discretization and its application to structural dynamicslink 이대일; Lee, Dae-Ill; et al, 한국과학기술원, 1993 |
1572 | 유한요소 역 해석을 이용한 박판금속 성형의 공정변수 예측 = Process parameter estimation in sheet metal forming using a finite element inverse methodlink 이충호; Lee, Choong-Ho; et al, 한국과학기술원, 1997 |
1573 | 유한요소법을 이용한 변형 다물체계의 마찰을 고려한 접촉-충돌 해석 = Analysis of frictional contact-impact in deformable multibody systems using finite element methodlink 고승환; Ko, Seung-Hwan; et al, 한국과학기술원, 1991 |
1574 | 유한요소법을 이용한 분자 시스템의 전자 밀도 계산에 관한 연구 = Finite element calculation of the electron densities of molecular systemslink 김민성; Kim, Min-Sung; 윤성기; 강정구; et al, 한국과학기술원, 2006 |
1575 | 유한폭 저어널베어링에서의 난류윤활해석 = The analysis of turbulent lubrication of finite journal bearinglink 이득우; Lee, Deug-Woo; et al, 한국과학기술원, 1990 |
1576 | 유한한 적층판의 차음성능 예측에 관한 연구 = A Study on the sound transmission through the finite multi-layered panellink 이종화; Lee, Jong-Hwa; et al, 한국과학기술원, 2003 |
1577 | 윤활유 내의 기포가 저널 베어링 성능에 미치는 영향 = The effect of bubbles in lubricant on the performance of journal bearingslink 최송; Choi, Song; et al, 한국과학기술원, 2004 |
1578 | 은 나노와이어 박막 기반 투명전극의 성능 향상 및 레이저 패터닝에 관한 연구 = (A) study on performance improvement and laser patterning of transparent electrodes based on silver nanowire thin filmslink 김건우; 양민양; et al, 한국과학기술원, 2019 |
1579 | 음속 노즐 뱅크의 유출 계수에 관한 실험적 연구 = An experimental study on the discharge coefficients of sonic nozzle banklink 최용문; Choi, Yong-Moon; et al, 한국과학기술원, 1999 |
1580 | 음장에서의 예혼합화염의 거동에 관한 실험적인 연구 = An experimental investigation on premixed flame front behavior under acoustic fieldslink 김진국; Kim, Jin-Kook; et al, 한국과학기술원, 1996 |
1581 | 음장을 표현하는 고유함수의 수보다 적은 수의 제어음원과 센서를 이용한 능동소음 제어시스템의 제어성능에 관한 연구 = A study on the control performance of the active noise control system with insufficient number of control sources and sensorslink 윤두병; Yoon, Doo-Byung; et al, 한국과학기술원, 1998 |
1582 | 음파의 산란을 이용한 고체내의 원통형 공동의 탐색 = Detection of a cylindrical cavity in solid based on acoustic wave scatteringlink 김유만; Kim, You-Man; et al, 한국과학기술원, 1993 |
1583 | 음향 메타물질을 이용한 덕트 소음의 효율적인 저감 = Efficient attenuation of duct-borne noise by using the acoustic metamaterialslink 김다영; 이정권; et al, 한국과학기술원, 2019 |
1584 | 음향 측정을 이용한 관 단면의 이차원 온도 분포 역추산 = Inverse estimation of the two-dimensional in-duct temperature distribution using the acoustic measurementlink 김태균; Kim, Tae-Kyoon; et al, 한국과학기술원, 2015 |
1585 | 음향광학변조필터를 이용한 투명 박막의 입체 형상 측정 = Volumetric thickness profile measurements of transparent thin film with acousto-optic tunable filterlink 김대석; Kim, Dae-Suk; 김수현; 공홍진; et al, 한국과학기술원, 2002 |
1586 | 응력연화현상을 고려한 복합화약의 비선형 거동에 관한 연구 = A Study on the nonlinear behaviors of polymer-bonded explosives considering stress softening effectlink 염기선; Yeom, Kee-Sun; et al, 한국과학기술원, 2013 |
1587 | 응집 영역 모델을 이용한 접착 조인트의 유한요소해석과 마이크로 패턴 설계를 통한 접착 강도 향상 = Finite element analysis of the adhesive joint using the cohesive zone model and adhesive strength improvement by the micro-pattern designlink 이민정; Lee, Min-Jung; et al, 한국과학기술원, 2013 |
1588 | 응축 증발법을 이용한 은 입자의 균일 하전 특성 연구 = Characteristics of uniform charging of silver particles using the condensation and evaporation methodlink 최영주; Choi, Young-Joo; et al, 한국과학기술원, 2007 |
1589 | 의사 가우시안 함수 신경망의 설계와 응용 = Design of pseudo Gaussian function network and its applicationlink 김병만; Kim, Byung-Man; et al, 한국과학기술원, 2005 |
1590 | 이동로봇용 전방향 능동 거리 센서를 이용한 장애물 감지 및 자기 위치 추정 = Obstacle detection and self-localization using an active omni-directional range sensor for mobile robotslink 정인수; Joung, In-Soo; et al, 한국과학기술원, 1998 |
1591 | 이방성을 지닌 복합재료 판에서 램파의 전파특성 및 변형률과 군속도와의 관계 = Characteristics of lamb wave propagation and relationship between the strain and group velocity of lamb wave in an anisotropic composite platelink 이상호; Rhee, Sang-ho; et al, 한국과학기술원, 2008 |
1592 | 이산화탄소를 희석제로 한 혼합기의 백금촉매 반응 특성 = Characteristics of catalytic combustion of $CO_2$ diluted gas mixtures with platinumlink 남창호; Nam, Chang-Ho; et al, 한국과학기술원, 2003 |
1593 | 이송구동부의 소모에너지 최소를 위한 최적설계 = Optimal design of feed-drive servo systems for minimization of energy consumptionlink 박종승; Park, Jong-Seung; et al, 한국과학기술원, 1991 |
1594 | 이온질화에 있어 탄소량의 영향과 이온질화강의마모특성 = Carbon effects in ion-nitriding and wear characteristics of ion-nitrided steellink 조규식; Cho, Kyu-Sik; et al, 한국과학기술원, 1979 |
1595 | 이종모드 레이저를 이용한 헤테로다인 레이저 간섭계 = Heterodyne interferometer using beat frequency between two-axial modes of a HeNe Laserlink 김민석; Kim, Min-Seok; et al, 한국과학기술원, 2002 |
1596 | 이종연료 예혼합압축착화 엔진에서 혼합기 성층을 통한 저부하 운전영역 확장 = Expansion of low-load operating range with mixture stratification in a dual-fuel premixed charge compression ignition enginelink 박현욱; 배충식; et al, 한국과학기술원, 2019 |
1597 | 이종재료 계면균열의 동적에너지방출률 및 T 응력에 관한 연구 = A study on the dynamic energy release rate and T stress of bimaterial interfacial cracklink 신동길; Shin, Dong-Kil; et al, 한국과학기술원, 2001 |
1598 | 이중 루프 간섭계 시스템을 이용한 광대역 감쇠 신호 측정 기술 = Broadband ring-down signal acquisition technique using a double-loop interferometric systemlink 김진환; Kim, Jin Hwan; et al, 한국과학기술원, 2016 |
1599 | 이중 변위 매핑을 이용한 영상 기반 도시 모델링 = Image-based urban modeling using bi-layered displacement mappinglink 유병현; Yoo, Byoung-Hyun; et al, 한국과학기술원, 2006 |
1600 | 이중범프포일 공기베어링의 성능에 관한 연구 = A study on the performance of double-bump air foil bearingslink 김영철; Kim, Young-Cheol; et al, 한국과학기술원, 2008 |
1601 | 이중복합재 정수압 압출의 접합조건에 관한 = Bonding criterion in bi-metal hydrostatic extrusionlink 박훈재; Park, Hoon-Jae; et al, 한국과학기술원, 1997 |
1602 | 이중서보를 이용한 초정밀 X-Y 테이블 평면 3자유도 위치제어 = 3-Axis dual-servo control of an XYTheta-stage for ultraprecision positioninglink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1997 |
1603 | 이차원 제트의 유체역학적 안정성에 관하여 = Hydrodynamic stability of 2-D plane jetlink 조석현; Jo, Sok-Hyun; et al, 한국과학기술원, 2002 |
1604 | 인간-로봇 감정 상호작용을 위한 공명특성 기반 특징 추출 = Feature extraction based on vocal resonance for emotional human-robot interactionlink 현경학; Hyun, Kyung-Hak; et al, 한국과학기술원, 2009 |
1605 | 인공 고관절 전치환술에서 최적의 방향 및 구현 방법에 관한 연구 = Study on optimal orientation of implant elements in total hip arthroplastylink 고병훈; Ko, Byung-Hoon; et al, 한국과학기술원, 2009 |
1606 | 인공신경망과 TRIZ를 이용한 고속철도 trainset 및 대차의 구성설계 = Configuration design of trainset and bogie of a high-speed train using neural network and TRIZlink 이장용; Lee, Jang-Yong; et al, 한국과학기술원, 2004 |
1607 | 인공지능과 다속성 의사결정을 이용한 베어링의 단계적 선정방법 = A stepwise selection method of bearings using artificial intelligence and multi-attribute decision makinglink 서태설; Seo, Tae-Sul; et al, 한국과학기술원, 2004 |
1608 | 인장 및 압축잔류응력이 피로균열 진전 및 닫힘거동에 미치는 영향 = The effects of tensile and compressive residual stresses on fatigue crack growth and crack closure behaviorlink 강기주; Kang, Ki-Ju; 엄윤용; 송지호; et al, 한국과학기술원, 1988 |
1609 | 인장-비틀림 복합하중을 받는 형상기억합금 중실축의 응력-변형율 거동에 관한 연구 = A study on the stress-strain behavior of shape memory alloy solid rods under tension-torsion combined loadinglink 정종하; Chung, Jong-Ha; et al, 한국과학기술원, 2007 |
1610 | 인코넬 718의 고온 불림 성형성 확보를 위한 최적 블랭크 설계 연구 = A study on blank optimization for blow forming of inconel 718 to secure formability at high temperaturelink 유준태; Yoo, Joon-Tae; et al, 한국과학기술원, 2013 |
1611 | 일반 형상의 아치 및 축대칭 쉘 구조물의 형상 설계 민감도 해석 및 최적설계 = Shape design sensitivity analysis and optimization of arch and axisymmetric shell structures of general shapeslink 김인용; Kim, In-Yong; et al, 한국과학기술원, 1993 |
1612 | 일반화 누적손상법칙을 이용한 피로수명 예측 전문가시스템의 개발 = An expert system for fatigue life prediction with using a generalized cumulative damage rulelink 김영훈; Kim, Young Hoon; et al, 한국과학기술원, 2007 |
1613 | 일반화된 론끼법을 이용한 비구면 측정 = Generalized Ronchi test for measurement of aspherical surfaceslink 이호재; Lee, Ho-Jae; et al, 한국과학기술원, 1999 |
1614 | 일방향 고탄성 탄소 섬유 보강 에폭시 복합 재료의 마찰 및 마모 메커니즘 = Friction and wear mechanisms of unidirectional high modulus carbon fiber reinforced epoxy compositeslink 심현해; Shim, Hyun-Hae; 윤재륜; 권오관; et al, 한국과학기술원, 1991 |
1615 | 일정 변형률 기반 심플렉스 요소의 개발 = Development of constant strain-based simplex type elementslink 엄재성; Eom, Jae-Sung; et al, 한국과학기술원, 2007 |
1616 | 임의 각도의 코너에서의 대류열전달 = Convective heat transfer near a corner of arbitrary anglelink 김만회; Kim, Man-Hoe; et al, 한국과학기술원, 1988 |
1617 | 임의 형상의 3차원 유동장 해석을 위한 비직교항 처리 및 벽함수방법에 관한 연구 = An investigation of treatment methods for non-orthogonal terms and wall function method in the numerical analysis of 3-D flow fields with arbitrary boundarieslink 조명종; Cho, Myung-Jong; et al, 한국과학기술원, 1996 |
1618 | 임피이던스를 가진 방음벽에 의한 반사 및 회절음장에 관한 연구 = A study on the reflected and diffracted sound field due to barriers with surface impedanceslink 임병덕; Lim, Byoung-Duk; et al, 한국과학기술원, 1987 |
1619 | 입경 측정을 위한 영상 처리 알고리즘의 개발에 관한 연구 = Development of image processing algorithm for particle size measurementlink 김유동; Kim, Yu-Dong; et al, 한국과학기술원, 2004 |
1620 | 입력특징 관점에서 심층신경망을 이용한 단방향 섬유 복합재의 횡방향 기계적 거동 예측에 대한 데이터 기반 접근법에 대한 연구 = A study on a data-driven approach to prediction of transverse mechanical behavior of unidirectional fiber-reinforced composites using deep neural networks: from perspective of input featurelink 김선원; Kim, Sun-Won; et al, 한국과학기술원, 2023 |