Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Conference
Showing results 10141 to 10200 of 15772
| The effect of shear stress in arteriovenous malformation Choung, Jin Seung; Ko, Ung Hyun; Park, Eun Young; Choi, Dong Heon; Oh, Eun Jung; Chung, Ho Yun; Shin, Jennifer Hyunjong, IBEC 2016 추계학술대회, 대한의용생체공학회, 2016-11 |
| The effect of shear stress in arteriovenous malformation Choung, Jin Seung; Ko, Ung Hyun; Park, Eun Young; Choi, Dong Heon; Oh, Eun Jung; Chung, Ho Yun; Shin, Jennifer Hyunjong, 대한생체역학회 2016 추계학술대회, 대한생체역학회, 2016-09-23 |
| The effect of sound on haptic perception Kim S.-C.; Kyung K.-U.; Kwon, Dong-Soo, 2nd Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007, WHC'07, pp.354 - 360, 123, 2007-03-22 |
| The effect of split injection in a spray guided DISI engine under the lean stratified operation Oh, Heechang; Bae, Choongsik, 10th International Symposium on Combustion Diagnostics, AVL Deutschland GmbH, 2012-05-22 |
| The effect of strain rate on the material characteristics of nickel-based superalloy inconel 718 Song, J.H.; Huh, Hoon, The 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, pp.283 - 288, 8th AEPA2006, 2006-09-25 |
| The Effect of Stress Ratio of the Largest Load Cycle on Fatigue Crack Growth under Random Loading Song, Ji Ho, EMAS, pp.2887 - 2894, 2002-06-01 |
| The Effect of Structural Properties for Cleaning Performance of PVA brush during Post-CMP Shin, Somin; Kim, Sanha; Kim, Dong Geun, International Conference on Precision Engineering and Sustainable Manufacturing, PRESM 2022, The Korean Society for Precision Engineering, 2022-05-09 |
| The Effect of Substrate Conduction on the Thermal Performance of a Flat Plate Pulsating Heat Pipe Yoon, Aejung; Kim, SungJin, 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT, 2014-07-15 |
| The effect of surface treatment on the drag characteristics in laminar flow Byon C.; Nam Y.; Kim, SungJin; Ju Y.S., ASME 2009 Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009, pp.315 - 321, 2009-12-18 |
| The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine Kook, S; Bae, C; Miles, Paul C.; Choi, D; Bergin, M; Reitz, Rolf D., SAE 2006 World Congress & Exhibition, Society of Automotive Engineers, 2006-04-03 |
| The effect of temperature on low-cycle fatigue behavior of prior cold worked 316L stainless steel Hong, SG; Yoon, S; Lee, Soon-Bok, International Conference on Fatigue Damage of Structural Mater, v.25, no.40797, pp.1293 - 1300, 2002-09-22 |
| The effect of Tg on thermo-mechanical deformation and reliability of adhesive flip chip assemblies during temperature cycling Kwon, WS; Yang, SY; Lee, Soon-Bok; Paik, Kyung-Wook, Proceedings - 54th Electronic Components and Technology Conference, pp.1731 - 1737, IEEE, 2004-06-01 |
| The effect of the operating temperature on the thermal performance of a micro pulsating heat pipe Kim, Juno; Kim, Sung-Jin, 6th Micro/Nanoscale Heat and Mass Transfer International Conference (MNHMT 2019), ASME, 2019-07-10 |
| The effect of the stereo focus technique on the three dimensional imagin in the confocal scanning microscopy Lee, S.Q.; Moon, K,S,; Gweon, Dae-Gab, Euspen 2nd international conference, pp.448 - 449, 2001-05 |
| The Effect of Thickness on Thermal Properties and Behavior of Submicron Copper Film on Polymer Substrate Lee, Soon-Bok; Yoon, Ji-Young; Kim, Sung-Yeol, Tokyo Tech-KAIST joint workshop, pp.82 - 84, 2005 |
| The Effect of Total Pressure in Continuous Flow Condensation Aerosol Generator Kim, Sang Soo; Kim, YK, Proceedings of the 4th International Aerosol Conference, pp.599 - 599, 1994-08-28 |
| The effect of transverse conduction on the oscillation flow and the thermal performance of a micro flat plate pulsating heat pipe Yoon, Aejung; Kim, Sung Jin, The 26th International Symposium on Transport Phenomena, Montan University, Tokyou University of Science, TPT, ISTP, 2015-09-29 |
| The effect of various microstructures on crack propagation in heterogeneous media Im, Seyoung, International Conference on Fracture and Damage Mechanics, 2008-09-11 |
| The effect of various wafer thicknesses on hot spot temperature Kyo, S.C.; Il, Y.H.; Kim, SungJin, 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, I-THERM, pp.428 - 431, 2008-05-28 |
| The effect of wire drawing and aging on mechanical and electrical properties of Cu-Cr-Zr alloy Joo, HS; Kim, YN; Hwang, SK; Im, Yong-Taek, International Conference on the Technology of Plasticity, ICTP 2017, pp.1129 - 1134, Elsevier BV, 2017-09 |
| The Effects of Agglomeration of Catalyst on its Activity in Partial Oxidation Reforming 이상호; 윤상호; 전승현; 배중면, KSNRE 2009 Annual Fall conference, KSNRE, 2009-11 |
| The effects of binder content and solid loading ratio of tape cast slurry on rheological properties for the fabrication of single cells of solid oxide fuel cell (SOFC) Lee, Sanghun; Bae, Joongmyeon, KCERS 2016 annual fall meeting, 한국세라믹학회, 2016-11-23 |
| The effects of cylindrical structures for sloshing dynamics in a rectangular tank subjected to translational harmonic excitation Kim, Ki Jong; Seo, Hyun-Duck; Kim, Daegyoum, 40th International Conference on Ocean, Offshore & Arctic Engineering, The American Society of Mechanical Engineers, 2021-06-21 |
| The Effects of Electrostatic Force on the Particle Transport in Rectangular Impactor Jeong, SH; Kim, Sang Soo, The 15th Annual Conference of the American Association for Aerosol Research (AAAR), The American Association for Aerosol Research(AAAR), 1996-10-14 |
| The Effects of High Frequency Vibration in Femto-Second Laser Drilling Kang, Bong C; Kim, Gun W; Cho, Sung H; Park, Jong K; Yang, Min-Yang, Asia-Pacific Laser Symposium, 2010-05-12 |
| The Effects of Injection Methods and EGR on Combustion and Emission Characteristics of a Single Cylinder DISI Engine Moon, S; Choi, J; Abo-Serie, Essam; Bae, Choongsik, 6th KSME-JSME Thermal and Fluids Engineering Conference, v.0, no.0, pp.0 - 0, 대한기계학회, 2005-03 |
| The Effects of Injector Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine Moon, S; Choi, J; Essam Abo-Serie; Bae, Choongsik, 2005 SAE Congress, pp.0, Society of Automotive Engineers, 2005-04 |
| The Effects of Intake Port Design on Flame Propagation in a Lean Burn Spark-Ignition Engine Bae, Choongsik, Proc. the Ninth International Pacific Conference on Automotive Engineering (IPC-9), v.1, pp.303 - 308, SAE, 1997-11-01 |
| The effects of intake valve closing timing on engine performance and emissions in a DME compression ignition engine at low load cold start condition Kim, Jaeheun; Bae, Choongsik, FISITA 2012 World Automotive Congress, International Federation of Automotive Engineering Societies, 2012-11-28 |
| The Effects of Interaction between Streamline Curvature and Turbulent Uniform Shear Flow Lim, H.J.; Sung, Hyung Jin; Chung, M.K., The 3rd JSME-KSME Fluids Engineering Conference, pp.506 - 511, 1994-07-25 |
| The Effects of Local Buckling on the Crash Energy Absorption of Thin-walled Expansion Tubes Ahn, Kwanghyun; Kim, Jin Sung; Huh, Hoon, Numisheet 2008, pp.799 - 804, Numisheet, 2008-09-01 |
| The effects of microstructure on material behaviors of solder alloys Lee, Soon-Bok; Hwang, Tae-kyung, APCFS(Asian Pacific Conf for Fracture and Strength)'04, pp.88 - 88, 2004 |
| The Effects of Nanoparticlemediated PPARγ Agonist Delivery on Plaque Stabilization: A Multichannel Highresolution Intravital Imaging Analysis Choi, Jah Yeon; Ryu, Jiheun; Song, Joon Woo; Kim, Ji Bak; Oh, Dong Joo; Gweon, Dae-Gab; Yoo, Hongki; et al, AHA Scientific Sessions 2015, American Heart Association, 2015-11-09 |
| The Effects of Operation Condition on PCDD/Fs Emission in Municipal Solid Waste Incinerators: Stack Gas Measurement and Evaluationof Operating Conditions Shin, D; Yang, W; Choi, J; Choi, Sangmin, 18th Symposium on Halogenated Environmental Organic Pollutants, 1998 |
| The Effects of Pilot Injection on Combustion in Dimethyl-ether (DME) Direct Injection Compression Ignition Engine Bae, Choongsik; Yoon, H; Yeom, K, 8th International Conference on Engines for Automobiles ICE2007, 2007-09 |
| The Effects of Radiation Shield and Laser Heating on the Soot Fromation and Oxidation of Diffusion Flame Lee, Chun Beom; Shin, Hyun Dong, AFI/TFI-2004, AFI/TFI, 2004-11-11 |
| The effects of spark timing and equivalence ratio on spark-ignition linear engine operation with liquefied petroleum gas Kim, Jaeheun; Bae, Choongsik; Kim, Gangchul, SAE 2012 World Congress and Exhibition, SAE International, 2012-04 |
| The Effects of Spray Droplet Characteristics on the Removal Efficiency of SO2 Yang, HM; Kim, Sang Soo, CFDRC Annual Software User Conference, 1998 |
| The Effects of Spray Droplet Characteristics on the Removal Efficiency of SO2 in a Spray Drying Sorber Yang, HM; Kim, Sang Soo, 8th International Symposium on Gas-Solid Flows, ASME/JSME Fluid Engineering Conference, 1999-07-18 |
| The Effects of the Sound Energy Level in Accordance with the Frequency Band on Haptic Perception Kwon, Dong-Soo; Kim, SC; Kyung, KU, Wolrd Haptics 2007, pp.354 - 359, 2007 |
| The Effects of Two-Stage Fuel Injection on Dimethyl-ether (DME) Homogeneous Charge Compression Ignition Engine Combustion Yoon, H; Jeon, J; Bae, Choongsik, The 9th International conference on eng, 2011-06-30 |
| The effects of wrist motions on the dynamic characteristics of balanced robotic manipulators Cho, Hyungsuck, International Conference on Computer-aided Technology, Hong Kong, 1988 |
| The efficiency enhancement of organic light-emitting diodes fabricated by solution process Yang, Min-Yang; Kim, Gun-Woo; Jeon, Kang-min; Youn, Hong-Seok, ICMTE(International Conference of Manufacturing Technology Engineers) 2012, Seoul, Korea, 한국생산제조시스템학회, 2012-10 |
| The Eigenvalue Sensitivity of Constrained Structures Using Lagrange Multiplier Method and Its Applications Won, K. M; Park, Youn-sik, Proceedings of the International Modal Analysis Conference, pp.545 - 550, International Modal Analysis Conference, 1997-02 |
| The Elastohydrodynamic Lubrication of Profiled Cylindrical Roller Park, TJ; Kim, Kyung-Woong, International Tribology Conference, pp.1043 - 1048, 1995-10-29 |
| The Enhance Time Delay Observer using Low Pass Filter for Nonlinear Systems Pyung-Hun Chang, International Conference of Decision and Control, pp.367 - 368, 1998 |
| The enhanced compact QP method for redundant manipulators using practical inequality constraints Pyung-Hun Chang, IEEE Int. Conf. Robotics and Automation, pp.107 - 114, IEEE, 1998-05-01 |
| The Enhanced Time Delay Observer using Low Pass Filter for Nonlinear Systems Pyung-Hun Chang, IEEE Conference on Decision and Control, pp.367 - 368, 1998-12-01 |
| The enhancement of interfacial adhesion strength of bi-material of Aluminum/Carbon fiber composite with micro and nano surface 김원석; 정주원; 이정주, International Conference on Innovations in Engineering and Technology 2013, International institute of engineers, 2013-12-26 |
| The enhancement of the fabrication performance of a multi-walled carbon nanotube tip using the blunt tip Yoon Keun Kwak, 2004 한국물리학회 추계학술대회, pp.0 - 0, 2004-10-01 |
| The Equilibrium States and the Stability Analysis of Reynolds Stress Equations for Homogeneous Shear Flows Chung, Myung Kyoon, Proc. of Advanced in Turbulence Research, pp.291 - 309, 1995 |
| The estimation method of center of pressure for wearable gait analysis system 최오성; 박수경, 대한기계학회 바이오공학부문 2017년도 춘계학술대회, 대한기계학회, 2017-04-27 |
| The estimation of 2D position and flatness errors for a planar XY stage from profiles measurement of guide-ways Hwang, J.; Park, C.H.; Kim, Seung-Woo, The 2nd International Conference on Positioning Technology, pp.134 - 138, The 2nd International Conference on Positioning Technology, 2006-12 |
| The estimation of unmeasured golf swing motion using 2-segment pendulum model including wrist cocking actuated by Hill’s muscle model 이창원; 박수경, 바이오공학부문 춘계 학술대회, 대한기계학회, 2017-04-28 |
| The ettect of pre-strain on the low cycle fatigue behavior of 316L stainless steel at elevated temparature Lee, Soon-Bok, Conference on Fatigue Damage of Structural Materials, 2002 |
| The experimental and theoretical approaches of contraction stress build-up of anisotropic conductive adhesives for flip chip interconnection Kwon, WS; Yang, SY; Lee, Soon-Bok; Paik, Kyung-Wook, 55th Electronic Components and Technology Conference, ECTC, pp.1468 - 1474, IEEE, 2005-05-31 |
| The fabrication of a semi-conducting single-walled carbon nanotube device using a burning technique Yoon Keun Kwak, 2004 한국정밀공학회 추계학술대회, pp.0 - 0, 2004-10-01 |
| The Fabrication of Carbon Nanotube Cartridges Choi, J.S.; Kwak, Yoon Keun; Kim, Soohyun, Proceedings of the 6th Euspen International Conference, pp.389 - 392, Euspen International Conference, 2006-05-28 |
| The fatigue life of a water-cooled stator bar of power plants subjected to the electrical degradations Hong, SK; Kim, JH; Lee, Soon-Bok; Kim, YW; Bae, YC; Kim, HS; Lee, H, KSME 2000 Conference of Materials and Fracture, pp.234 - 238, 2001 |
| The feedback/forward controller of joint could achieve the center of mass motion during running with gains determined by natural frequency Lim, Hye Rim; Park, Su Kyung, International Biomedical Engineering Conference 2015, The Korean Society of Medical & Biological Engineering, The Korean Society of Biomechanics, 2015-11 |
Discover
Open Access
Date issued
- 4,098 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989