1 | 2상 이론을 이용한 뇌 충격의 유한 요소 해석 = Finite element analysis of brain impact by linear biphasic theorylink 박해수; Park, Hae-Soo; et al, 한국과학기술원, 1996 |
2 | 2상 자연순환 회로내에서의 유동 불안정에 관한 연구 = A study on the flow instabilities in two-phase natural circulation loopslink 이동원; Lee, Dong-Won; et al, 한국과학기술원, 1993 |
3 | 2색 레이저 유도 형광 기법 및 공초점 현미경법을 이용한 미소 간극 내 액체 온도 측정에 관한 실험적 연구 = An experimental study on measurement of liquid temperature across microscale gap using two-color ratiometric laser-induced fluorescence technique in combination with confocal microscopylink 정동운; Jeong, Dong-Woon; et al, 한국과학기술원, 2010 |
4 | 2유체 분사장치의 분무 및 연소 특성에 관한 연구 = A study on the spray and combustion characteristics of a twin-fluid injectorlink 김기성; Kim, Ki-Seong; et al, 한국과학기술원, 1994 |
5 | 3-Dimmensional shape recognition of specular objects using a laser beam scanning optical sensor = 경면 물체의 3차원 형상 측정에 관한 연구link Ryu, Young-Kee; 유영기; et al, 한국과학기술원, 1996 |
6 | 3-PPS(RRR)P 직렬관절로 구성된 6자유도 병렬 매니퓰레이터에 관한 연구 = Analysis and design of a 6 degree of freedom 3-PPS(RRR)P parallel manipulatorlink 변용규; Byun, Yong-Kyu; et al, 한국과학기술원, 1997 |
7 | 3-루프 제어기를 적용한 공기압 서보 위치 제어 시스템에서의 퍼지 게인 조정기의 설계 및 응용에 관한 연구 = Applications of a fuzzy gain adapter to the three loop position control of a pneumatic servo systemlink 전용수; Jeon, Yong-Soo; et al, 한국과학기술원, 1997 |
8 | 304L 스테인리스강의 열적 기계적 피로 거동과 수명 예측에 관한 연구 = A study on the thermo-mechanical fatigue behavior and life prediction of 304L stainless steellink 배근호; Bae, Keun-Ho; et al, 한국과학기술원, 2013 |
9 | 316L 스테인리스강의 동적변형시효 발생기구 규명과 이의 인장 및 저주기피로 거동에 미치는 영향 평가 = Mechanism of dynamic strain aging and characterization of its effect on the tensile and low-cycle fatigue behavior in type 316L stainless steellink 홍성구; Hong, Seong-Gu; et al, 한국과학기술원, 2005 |
10 | 355 nm 나노초 펄스레이저의 공간적 빔 쉐이핑에 의한 폴리이미드 가공의 수치해석적 연구 = A numerical study on machining of polyimide by spatial beam shaping of 355 nm nanosecond pulsed laserlink 안준수; Ahn, Jun-Su; et al, 한국과학기술원, 2014 |
11 | 3D structure recovery and motion segmentation using uncalibrated cameras = 비보정 카메라를 이용한 삼차원 복원과 움직임 분할link Ha, Jong-Eun; 하종은; et al, 한국과학기술원, 2000 |
12 | 3중 다공 동축 버너에서 $CO_2$ 첨가가 순산소 화염에 미치는 영향에 관한 연구 = Study on effect of $CO_2$ addition in oxy-fuel flame with triple concentric multi-jet burnerlink 박장희; Park, Jang-Hee; et al, 한국과학기술원, 2010 |
13 | 3차원 가상 물체의 형상과 깊이 전달의 향상을 위한 휴대 단말 실감 인터페이스 = Handheld tangible interface for enhanced shape and depth information transfer of 3D virtual objectlink 한병길; 권동수; et al, 한국과학기술원, 2019 |
14 | 3차원 결정소성 유한요소해석을 통한 변형 집합조직 및 이방성 예측 = Prediction of deformation texture and anisotropy based on three-dimensional crystal plasticity finite element methodlink 정경환; Jung, Kyung-Hwan; et al, 한국과학기술원, 2012 |
15 | 3차원 능동 거리 센서 시스템을 이용한 이동로봇의 환경 모델링과 자율 지도 작성 = Environment modeling and autonomous map building for mobile robots using a 3D active vision sensorlink 김민영; Kim, Min-Young; et al, 한국과학기술원, 2004 |
16 | 3차원 보행 동역학 모델의 제안과 응용 = Three dimensional walking dynamic model and its applicationslink 이명현; 김정; et al, 한국과학기술원, 2020 |
17 | 3차원 브리지형 탄성힌지 메커니즘을 이용한 압전 구동기의 개발 = Development of piezoactuator using three-dimensional bridge-type hinge mechanismlink 김준형; Kim, Jun-Hyung; et al, 한국과학기술원, 2003 |
18 | 3차원 비압축성 유체 유동의 자유 표면 추적과 경계면 요소 재구성 기법에 관한 연구 = A front tracking and fringe element reconstruction method for three-dimensional incompressible flowlink 최두순; Choi, Du-Soon; et al, 한국과학기술원, 2005 |
19 | 3차원 열영상 구현을 이용한 차실내 열적 쾌적성 평가에 관한 연구 = (A) study on thermal comfort evaluation inside a passenger vehicle compartment using 3 dimension image reconstructionlink 이정훈; 김경수; et al, 한국과학기술원, 2016 |
20 | 3차원 유동효과가 고려된 유선곡률 방법에 의한 축류터빈의 성능 해석 = Performance analysis by streamline curvature method considering three dimensional flow effect for axial flow turbinelink 박호동; Park, Ho-Dong; et al, 한국과학기술원, 1992 |
21 | 3차원 유한요소해석을 이용한 기어 냉간단조 공정설계 시스템 개발에 관한 연구 = A study on development of process design system for cold forging of gears using 3-dimensional FE analysislink 송종호; Song, Jong-Ho; et al, 한국과학기술원, 2004 |
22 | 3차원 유한요소해석을 이용한 표면피로균열 닫힘 현상에 관한 연구 = Three dimensional finite element analysis of surface fatigue crack closurelink 김주성; Kim, Joo-Sung; et al, 한국과학기술원, 2005 |
23 | 3차원 적층 패키지용 인터커넥션 공정에 관한 연구 = A study on interconnection process of 3D packaginglink 김선락; Kim, Sun-Rak; et al, 한국과학기술원, 2013 |
24 | 3차원 탄성유체윤활 문제의 수치해석 = A numerical analysis of the 3-dimensional elastohydrodynamic lubrication problemlink 박태조; Park, Tae-Jo; et al, 한국과학기술원, 1989 |
25 | 6-Axis ultraprecision positioning mechanism design and positioning control = 6축 초정밀 위치결정 기구의 설계와 제어에 관한 연구link Ryu, Jae-Wook; 류재욱; et al, 한국과학기술원, 1997 |
26 | A hybrid solar cell using polymers and silicon nanoparticles = 실리콘 나노 입자를 이용한 유/무기 하이브리드 태양전지 개발link Kim, Seong-Beom; 김성범; et al, 한국과학기술원, 2012 |
27 | A mechatronic study on a self-energizing clutch actuator system: modeling, estimation, and control = 자기강화클러치 구동 시스템에 관한 메카트로닉스적 연구: 모델링, 추정 및 제어기 설계link Kim, Jin-Sung; 김진성; et al, 한국과학기술원, 2013 |
28 | A new ductile fracture criterion for the formability prediction of steel sheets and its application to finite element analysis = 강판의 성형성 예측을 위한 새로운 연성 파괴 조건 및 유한 요소 해석에의 응용link Lou, Yan-Shan; Lou Yanshan; et al, 한국과학기술원, 2012 |
29 | A numerical investigation on high power laser welding characteristics of pipes = 고출력 레이저를 이용한 파이프 용접특성의 수치해석적 연구link Sohail, Muhammad; Sohail; et al, 한국과학기술원, 2015 |
30 | A quasiconuum method for deformations of carbon nanotubes = 탄소나노튜브의 변형 해석을 위한 준연속체 방법link Park, Jong-Youn; 박종연; et al, 한국과학기술원, 2007 |
31 | A robust model-based control design for turbocharged diesel engine air management system = 디젤 엔진 공기 순환계를 위한 강건한 모델 기반 제어기의 설계link Jin, Hyo-Min; 진효민; et al, 한국과학기술원, 2014 |
32 | A study of caenorhabditis elegans motility in various physical environments = 다양한 물리적 환경에서 예쁜 꼬마선충의 운동성에 관한 연구link Kim, Dae-Yeon; 김대연; et al, 한국과학기술원, 2011 |
33 | A study of clutchless parallel hybrid powertrain mechanism = 클러치가 없는 병렬형 하이브리드 파워트레인 메커니즘에 대한 연구link Kim, Sun Je; 김선제; et al, 한국과학기술원, 2015 |
34 | A study of oocyte/embryo manipulation using microfluidics and robotics = 미세유체역학 및 로봇기술을 이용한 난자 미세조작에 관한 연구link Kim, Jung-Sik; 김정식; et al, 한국과학기술원, 2012 |
35 | A study on a system architecture of model predictive control for vehicle lateral stability = 차량의 횡방향 안정성 향상을 위한 모델예측제어의 시스템 구조에 관한 연구link Choi, Moo-Ryong; 최무룡; et al, 한국과학기술원, 2014 |
36 | A study on advanced surrogate model-based optimization using auxiliary information = 보조 정보를 이용한 고급 대리 모델 기반 최적 설계에 대한 연구link Lee, Min Gyu; 이민규; et al, 한국과학기술원, 2023 |
37 | A study on continuous carbon/epoxy composite bipolar plates for PEM fuel cells = 양성자 교환막 연료전지용 장섬유 탄소/에폭시 복합재료 분리판에 관한 연구link Lim, Jun-Woo; 임준우; et al, 한국과학기술원, 2013 |
38 | A Study on J-integral estimation and its applications for circumferential through-wall cracks in piping = 배관 원주방향 관통균열에 대한 J-적분 평가 및 적용에 대한 연구link Park, Jeong Soon; 박정순; Im, Se Young; 임세영; et al, 한국과학기술원, 2015 |
39 | A study on large-deformation contact behaviors using variable-node finite elements = 변절점 요소를 이용한 대변형 접촉 거동에 관한 연구link Jin, seungmin; 진승민; et al, 한국과학기술원, 2015 |
40 | A Study on Multiple-Reflection and Rayleigh Absorption-Emission-Scattering Effects in Laser Micromachining = 레이저 마이크로 가공에 있어서 다중반사 및 레일레이 흡수방사산란 효과에 관한 연구link Park, Kwan-Woo; 박관우; et al, 한국과학기술원, 2010 |
41 | A study on quantitative observation and characterization of combustion processes of solid fuel particles entrained into hot gas flow = 고온 유동장 내 고체연료 입자 연소과정의 정량적 관측과 특성화 연구link Lee, Hoo Kyung; 이후경; et al, 한국과학기술원, 2015 |
42 | A study on the adhesive joints for the secondary barrier of LNG cargo containment system = 액화천연가스 저장시스템의 2차 방벽 접착 조인트에 관한 연구link Yoon, Soon-Ho; 윤순호; et al, 한국과학기술원, 2012 |
43 | A study on the analysis of shell structures using adaptive t-spline finite element method = 적응적 T-스플라인 유한요소법을 이용한 쉘 구조물의 해석에 관한 연구link Uhm, Tae-Kyoung; 엄태경; et al, 한국과학기술원, 2010 |
44 | A study on the characteristics of nano-particle reinforced adhesive joints at cryogenic temperature = 나노입자 보강 접착조인트의 극저온 특성에 대한 연구link Park, Sang-Wook; 박상욱; et al, 한국과학기술원, 2010 |
45 | A study on the composite structures for the reduction of radar cross section = 레이더 반사 단면적 감소를 위한 복합재료 구조체에 관한 연구link Choi, Ilbeom; 최일범; et al, 한국과학기술원, 2015 |
46 | A study on the design of quadruped walking robot and its push recovery strategy = 사족보행로봇 설계와 외란복원기법에 대한 연구link Chung, Jae-Wook; 정재욱; et al, 한국과학기술원, 2010 |
47 | A study on the improvement of adhesively bonded joint strength at cryogenic temperature with flame and silane treatment = 접착조인트의 극저온 강도 향상을 위한 화염 및 실란 표면처리에 관한 연구link Kim, Jin-Gyu; 김진규; et al, 한국과학기술원, 2012 |
48 | A study on the isogeometric shape and topology optimization of shell structures = 등기하해석을 이용한 쉘 구조물의 형상 및 위상 최적설계에 관한 연구link Kang, Pilseong; 강필성; et al, 한국과학기술원, 2015 |
49 | A study on the sheet metal forming process using the infrared ray local heating for advanced high-strength steel = 적외선 국부가열을 사용한 초고장력강 판재 성형공정에 관한 연구link Lee, Eun-Ho; 이은호; et al, 한국과학기술원, 2015 |
50 | A study on viscoelastic contact behaviors of polymer for transfer printing applications = 트랜스퍼 프린팅용 폴리머 재료의 점탄성 접촉 거동에 관한 연구link Park, Jae-Shin; 박재신; et al, 한국과학기술원, 2014 |
51 | A task-priority strategy for highly redundant robots: efficient redundancy optimization and robust dynamic consistent control = 많은 수의 여유자유도를 가지는 로봇을 위한 작업 우선 순위 전략: 효율적인 여유자유도 최적화와 강인한 다이나믹 컨시스턴트 (Dynamic Consistent) 제어link Jeong, Jae-Won; 정재원; et al, 한국과학기술원, 2011 |
52 | (A) biprism stereo camera system = 바이프리즘 스테레오 카메라 시스템link Lee, Doo-Hyun; 이두현; et al, 한국과학기술원, 2000 |
53 | (A) chromatic color constancy model for three dimensional objects based on human visual and illuminant perception = 인간의 시각과 광원 인지 특성을 이용한 3차원 물체의 색도 항상성 모델link Kim, Chang-Yeong; 김창용; et al, 한국과학기술원, 1998 |
54 | (A) continuously variable transmission for physically interacting robot = 물리적으로 상호작용하는 로봇을 위한 연속 가변 변속기link Shin, Won-Seok; Kim, Jung; et al, 한국과학기술원, 2023 |
55 | (A) crowd evacuation simulation considering interaction between human reaction and fire simulation data = 인간의 대응과 화재 시뮬레이션 데이터의 상호작용을 고려한 군중 탈출 시뮬레이션link Kim, HyunCheol; Han, Soonhung; et al, 한국과학기술원, 2019 |
56 | (A) data-driven approach to modeling and control of mobile robots with nonlinear dynamics = 비선형성을 갖는 이동 로봇의 모델링 및 제어를 위한 데이터 기반 방법론link Jang, Junwoo; Kim, Jinwhan; et al, 한국과학기술원, 2023 |
57 | (A) dislocation theory of semi-brittle fracture = 반취성 파괴 이론link Chung, Soon-Kil; 정순길; et al, 한국과학기술원, 1981 |
58 | (A) ductile fracture criterion of sheet metals at a wide range of strain rates = 변형률속도에 따른 금속 판재의 연성파단조건link Lim, Sung Jun; 임성준; et al, 한국과학기술원, 2017 |
59 | (A) fine positioning mechanism based on antagonistic arrangement of magnetic levitation forces = 자기부상력의 상반구조 배열을 이용한 미세 위치결정기구link Choi, Kee-Bong; 최기봉; et al, 한국과학기술원, 1998 |
60 | (A) haptic master interface for robot-assisted laparoscopic surgery = 복강경 로봇 수술을 위한 햅틱 마스터 인터페이스link Lee, Hyunyoung; Kwon, Dong-Soo; et al, 한국과학기술원, 2019 |