1 | 11%CrMoVNb 강의 크리프 성질에 미치는 템퍼링 열처리의 영향 = Effects of tempering heat treatment on the creep properties of a 11%CrMoVNb steellink 이영수; Lee, Young-Soo; et al, 한국과학기술원, 2001 |
2 | 304L 스테인리스강의 열적 기계적 피로 거동과 수명 예측에 관한 연구 = A study on the thermo-mechanical fatigue behavior and life prediction of 304L stainless steellink 배근호; Bae, Keun-Ho; et al, 한국과학기술원, 2013 |
3 | An anisotropic viscoplasticity model for shale based on layered microstructure homogenization Choo, Jinhyun; Semnani, Shabnam J.; White, Joshua A., International Journal for Numerical and Analytical Methods in Geomechanics, v.45, no.4, pp.502 - 520, 2021-03 |
4 | An experimental and numerical study on long-term deformation of SRC columns An, Gyeong Hee; Seo, Jun-Ki; Cha, Sang Lyul; Kim, Jin-Keun, COMPUTERS AND CONCRETE, v.22, no.3, pp.261 - 267, 2018-09 |
5 | Characteristics of dislocation structure in creep deformed lamellar TiAl alloy within primary regime h. s. cho; Nam, Soo Woo, METALS AND MATERIALS INTERNATIONAL, v.5, no.3, pp.255 - 261, 1999 |
6 | Colorimetric Recording of Thermal Conditions on Polymeric Inverse Opals Lee, Seung Yeol; Lee, Joon Seok; Kim, Shin-Hyun, ADVANCED MATERIALS, v.31, no.30, 2019-07 |
7 | Creep deformation of Sn-3.5Ag-xCu and Sn-3.5Ag-xBi solder joints Shin, SW; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.34, no.2, pp.188 - 195, 2005-02 |
8 | Creep rupture of lead-free Sn-3.5Ag-Cu solders Joo, DK; Yu, Jin; Shin, SW, JOURNAL OF ELECTRONIC MATERIALS, v.32, no.6, pp.541 - 547, 2003-06 |
9 | Cu 또는 Bi 첨가가 Sn-3.5Ag계 무연 솔더 합금의 크리프 특성에 미치는 영향 = Effects of Cu or Bi addition to the creep properties of Sn-3.5Ag based lead-free solder alloyslink 신승우; Shin, Seung-Woo; et al, 한국과학기술원, 2003 |
10 | Deformation behavior of powder-metallurgy processed high-strain-rate superplastic 20%SiCp/2124 Al composite in a wide range of temperature Kim, WJ; Yeon, JH; Shin, DH; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.269, no.1-2, pp.142 - 151, 1999-08 |
11 | Design moment variations in bridges constructed using a balanced cantilever method Kwak, Hyo-Gyoung; Son, JK, CONSTRUCTION AND BUILDING MATERIALS, v.18, no.10, pp.753 - 766, 2004-12 |
12 | Determination of design moments in bridges constructed by balanced cantilever method Kwak, Hyo-Gyoung; Son, JK, ENGINEERING STRUCTURES, v.24, no.5, pp.639 - 648, 2002-05 |
13 | Determination of design moments in bridges constructed with a movable scaffolding system (MSS) Kwak, Hyo-Gyoung; Son, JK, COMPUTERS & STRUCTURES, v.84, no.31-32, pp.2141 - 2150, 2006-12 |
14 | Directional solidification and creep deformation of a Ti-46Al-1.5Mo-0.2C (at.%) alloy Lee, HN; Johnson, DR; Inui, H; Oh, MH; Wee, Dang-Moon; Yamaguchi, M, INTERMETALLICS, v.10, no.9, pp.841 - 850, 2002-09 |
15 | Effects of the Slab Casting Sequences and the Drying Shrinkage of Concrete Slabs on the Short-term and Long-term Behavior of Composite Steel Box Girder Bridges. Part 2 Kwak, Hyo-Gyoung; Seo, Young-Jae; Jung, Chan-Mook, ENGINEERING STRUCTURES, v.22, no.11, pp.1453 - 1465, 2000-11 |
16 | Experimental and parametric study on critical compressive strain of concrete under creep effect = 크리프 영향을 고려한 콘크리트의 극한 압축변형률에 대한 실험 및 매개변수 연구link Tran, Tuan Nghia; 트란, 탄 니아; Nghia, Tran Tuan; 니아, 트란 탄; et al, 한국과학기술원, 2010 |
17 | Factors affecting the change of subgrain size of 15Mo3 steel during creep Ginsztler, J; Nam, Soo Woo; Szabo, PJ, MATERIALS AT HIGH TEMPERATURES, v.21, no.4, pp.187 - 192, 2004 |
18 | Fatigue and fracture assessment for reliability in electronics packaging Lee, Soon-Bok; Kim, I; Park, TS, INTERNATIONAL JOURNAL OF FRACTURE, v.150, pp.91 - 104, 2008-03 |
19 | FE analysis of ultimate strength of circular CFT columns considering creep effect Kim, SeongHun; Kwak, Hyo-Gyoung, COMPUTERS AND CONCRETE, v.28, no.3, pp.333 - 345, 2021-09 |
20 | HIGH TEMPERATURE MECHANICAL PROPERTIES OF CVD-SiC THIN FILMS Park, Kwi-Il; Kim, Jong-Ho; Lee, Hyun-Keun; Kim, Do Kyung, MODERN PHYSICS LETTERS B, v.23, no.31-32, pp.3877 - 3886, 2009-12 |
21 | Improvement of creep resistance in TiB particle reinforced Ti2AlNb composite particularly above 700 degrees C Yang, SJ; Emura, S; Nam, Soo Woo; Hagiwara, M; Jeon, HS; Yoon, SB, MATERIALS LETTERS, v.58, no.25, pp.3187 - 3191, 2004-10 |
22 | Investigation of creep deformation mechanisms and environmental effects on creep resistance in a Ti2AlNb based intermetallic alloy Yang, SJ; Nam, Soo Woo; Hagiwara, M, INTERMETALLICS, v.12, no.3, pp.261 - 274, 2004-03 |
23 | Investigation of Primary and Secondary Creep Deformation Mechanism of TiAl Nam, Soo Woo; h. s. cho; s. k. hwang; n. j. kim, METALS AND MATERIALS INTERNATIONAL, v.6, no.4, pp.287 - 292, 2000-08 |
24 | Load transfer mechanism and mechanical properties of SiCw/Al metal matrix composites Ryu, Ho Jin; Hong, Soon-Hyung, METALS AND MATERIALS-KOREA, v.6, no.1, pp.33 - 38, 2000-02 |
25 | Long-term behavior of composite bridges considering construction sequence = 시공단계를 고려한 합성형 교량의 장기거동 해석link Seo, Young-Jae; 서영재; et al, 한국과학기술원, 2002 |
26 | Long-term behavior of composite girder bridges Kwak, Hyo-Gyoung; Seo, YJ, COMPUTERS STRUCTURES, v.74, no.5, pp.583 - 599, 2000-02 |
27 | Microstructure and creep resistance of a diffusionally aluminized Ni-base superalloy Sah, Injin; Kim, Sung Hwan; Jang, Changheui, METALS AND MATERIALS INTERNATIONAL, v.22, no.6, pp.1033 - 1040, 2016-11 |
28 | Modified-creep experiment of an elastomer film on a rigid substrate using nanoindentation with a flat-ended cylindrical tip Choi, Seung Tae; Jeong, Su Jeong; Earmme, Youn-Young, SCRIPTA MATERIALIA, v.58, no.3, pp.199 - 202, 2008-02 |
29 | MSS공법으로 시공되는 교량의 설계 모멘트 결정 곽, 효경; 손, 제국; Kwak, Hyo-Gyoung; Son, Je-Kuk, 한국전산구조공학회 논문집, Vol.14, No.3, 2001-09 |
30 | MSS공법으로 시공되는 교량의 시공단계별 시간의존적 거동 손제국; 곽효경, 대한토목학회 논문집A, v.24, no.4a, pp.797 - 806, 2004-07 |
31 | Nonlinear behavior of slender RC columns (1). Numerical formulation Kwak, Hyo-Gyoung; Kim, JK, CONSTRUCTION AND BUILDING MATERIALS, v.20, no.8, pp.527 - 537, 2006-10 |
32 | Nonlinear behavior of slender RC columns (2). Introduction of design formula Kwak, Hyo-Gyoung; Kim, JK, CONSTRUCTION AND BUILDING MATERIALS, v.20, no.8, pp.538 - 553, 2006-10 |
33 | Numerical Analysis of Time-Dependent Behavior of Pre-cast Pre-stressed Concrete Girder Bridges Kwak, Hyo-Gyoung; Seo, Young-Jae, CONSTRUCTION AND BUILDING MATERIALS, v.16, no.1, pp.49 - 63, 2002-02 |
34 | Oxidation and mechanical behaviors of solid-solution hardening nickel-base superalloys in high temperature helium environments = 고용강화형 니켈기초합금의 고온헬륨환경에서의 산화 및 기계적 특성link Kim, Dae-Jong; 김대종; et al, 한국과학기술원, 2010 |
35 | Oxidation behavior and mechanical properties of yttrium-doped L1(2) (Al,Cr)(3)Ti coating on TiAl alloys Lee, HN; Park, ZM; Oh, MH; Kim, KY; Wee, Dang-Moon, SCRIPTA MATERIALIA, v.41, no.10, pp.1073 - 1078, 1999-10 |
36 | Oxidation behaviour of an Alloy 617 in very high-temperature air and helium environments Jang, Changheui; Lee, Daejin; Kim, Daejong, INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, v.85, no.6, pp.368 - 377, 2008-06 |
37 | Quantum vortex creep: Hall and dissipative tunneling Kim, GH; Shin, Mincheol, PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, v.303, no.1-2, pp.73 - 80, 1998-07 |
38 | Reliability assessment of multiaxial creep and multiaxial fatigue using stochastic modeling = 추계적 모델링을 이용한 다축 크리프 및 다축피로 하의 신뢰도 평가link Lee, Bong-Hoon; 이봉훈; et al, 한국과학기술원, 2002 |
39 | Rupture time analyses of the Sn-3.5Ag solder alloys containing Cu or Bi Yu, Jin; Joo, DK; Shin, SW, ACTA MATERIALIA, v.50, no.17, pp.4315 - 4324, 2002-10 |
40 | Span ratios in bridges constructed using a balanced cantilever method Kwak, Hyo-Gyoung; Son, JK, CONSTRUCTION AND BUILDING MATERIALS, v.18, no.10, pp.767 - 779, 2004-12 |
41 | SRC 기둥의 장기거동에 대한 보정모델식 개발 = Development of modified model for the long-term behavior of SRC columnlink 서준기; Seo, Jun Ki; et al, 한국과학기술원, 2016 |
42 | The effect of microstructures on creep behavior of Ti-48Al-2W intermetallic compounds Kim, HY; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.329 , no.SI, pp.788 - 794, 2002-06 |
43 | $Ti_2AlNb$ 기지 합금과 TiB 분산강화 복합재료의 크리프 변형기구 천이현상에 관한 연구 = A study on the transition of creep deformation mechanism in $Ti_2AlNb$ alloy and TiB particulate compositelink 양승진; Yang, Seung-Jin; et al, 한국과학기술원, 2004 |
44 | Time-dependent analysis of RC frame structures considering construction sequences Kwak, Hyo-Gyoung; Kim, Jin-Keun, BUILDING AND ENVIRONMENT, v.41, no.10, pp.1423 - 1434, 2006-10 |
45 | Universal Hopping Motion Protected by Structural Topology Song, Moojune; You, Mujin; Yang, Seungmo; Ju, Tae-Seong; Moon, Kyoung-Woong; Hwang, Chanyong; Kim, Kyoung-Whan; et al, ADVANCED MATERIALS, v.34, no.40, 2022-10 |
46 | 다축응력 상태에 놓인 콘크리트의 크리프 특성에 관한 실험 연구 김진근; 이수곤; 김선영; 권승희, 콘크리트학회 논문집, v.16, no.2, pp.185 - 194, 2004-04 |
47 | 로봇의 작업 명령을 위한 심볼 입력 해석 = Interpretation of symbol string for task commands of a robotlink 박상현; Park, Sang-Hyun; et al, 한국과학기술원, 2005 |
48 | 마감 재료가 콘크리트 수분확산에 미치는 영향 연구 = The effect of finishing materials on the moisture diffusion of concretelink 최원정; Choi, Won-joung; et al, 한국과학기술원, 2015 |
49 | 무연 소더에서의 재료 거동 및 열피로 특성에 대한 미세 구조 영향 = Effects of microstructure on material behaviors and fatigue properties of lead-free solder materialslink 황태경; Hwang, Tae-Kyung; et al, 한국과학기술원, 2007 |
50 | 미세조직이 무연 솔더의 크리프 성질에 미치는 영향 = The effect of microstructure on the creep behavior of the lead-free solderslink 주대권; Joo, Dae-Kwon; et al, 한국과학기술원, 2002 |
51 | 미세평면 모델을 적용한 다축응력 상태의 콘크리트 크리프 분석 김진근; 김윤용; 권승희, 콘크리트학회 논문집, v.16, no.2, pp.195 - 204, 2004-04 |
52 | 시공단계를 고려한 콘크리트 프레임 구조물의 시간의존적 해석 = Time-dependent analysis of concrete frame structures considering the construction sequenceslink 이원호; Lee, Won Ho; et al, 한국과학기술원, 2016 |
53 | 양생 조건에 따른 콘크리트의 장기거동 특성 연구 = Long-term behavior of concrete cured in various conditionslink 김재연; Kim, Jae Yeon; et al, 한국과학기술원, 2015 |
54 | 철근콘크리트 벽체의 초기재령 거동 해석 = Early-age behavior in base restrained reinforced concrete wallslink 하수준; Ha, Soo-Jun; et al, 한국과학기술원, 2003 |
55 | 콘크리트 크리프 및 건조수축 실험변수 결정 방법에 관한 연구 조선두; 송은석; 김진근; 권승희, 콘크리트학회 논문집, v.31, no.6, pp.619 - 628, 2019-12 |
56 | 크리프 변형재료에서 손상을 고려한 모드 I 정지균열의 응력장 해석 = Analysis of the stationary mode I crack in creeping solids coupled with damagelink 김진영; Kim, Jin-Young; et al, 한국과학기술원, 2002 |